Merge branch 'remotes/lorenzo/pci/mvebu'

- Implement pci_remap_iospace() for ARM so mvebu can use
  devm_pci_remap_iospace() instead of the previous ARM-specific
  pci_ioremap_io() interface (Pali Rohár)

- Use the standard pci_host_probe() instead of the device-specific
  mvebu_pci_host_probe() (Pali Rohár)

- Replace all uses of ARM-specific pci_ioremap_io() with the
  ARM implementation of the standard pci_remap_iospace() interface and
  remove pci_ioremap_io() (Pali Rohár)

- Skip initializing invalid Root Ports (Pali Rohár)

- Check for errors from pci_bridge_emul_init() (Pali Rohár)

- Ignore any bridges at non-zero function numbers (Pali Rohár)

- Return ~0 data for invalid config read size (Pali Rohár)

- Disallow mapping interrupts on emulated bridges (Pali Rohár)

- Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
  initialization (Pali Rohár)

- Make type bits in Root Port I/O Base register read-only (Pali Rohár)

- Disable Root Port windows when base/limit set to invalid values (Pali
  Rohár)

- Set controller to Root Complex mode (Pali Rohár)

- Set Root Port Class Code to PCI Bridge (Pali Rohár)

- Update emulated Root Port secondary bus numbers to better reflect the
  actual topology (Pali Rohár)

- Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
  pci_reset_secondary_bus() can reset connected devices (Pali Rohár)

- Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports
  (Pali Rohár)

- Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali
  Rohár)

- Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada
  XP and newer devices (Pali Rohár)

- Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali
  Rohár)

- Add support for compiling as a module (Pali Rohár)

* remotes/lorenzo/pci/mvebu:
  PCI: mvebu: Add support for compiling driver as module
  bus: mvebu-mbus: Export symbols for public API window functions
  PCI: mvebu: Fix support for DEVCAP2, DEVCTL2 and LNKCTL2 registers on emulated bridge
  PCI: mvebu: Fix support for PCI_EXP_RTSTA on emulated bridge
  PCI: mvebu: Fix support for PCI_EXP_DEVCTL on emulated bridge
  PCI: mvebu: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridge
  PCI: mvebu: Fix configuring secondary bus of PCIe Root Port via emulated bridge
  PCI: mvebu: Set PCI Bridge Class Code to PCI Bridge
  PCI: mvebu: Setup PCIe controller to Root Complex mode
  PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers
  PCI: mvebu: Do not modify PCI IO type bits in conf_write
  PCI: mvebu: Fix support for bus mastering and PCI_COMMAND on emulated bridge
  PCI: mvebu: Disallow mapping interrupts on emulated bridges
  PCI: mvebu: Handle invalid size of read config request
  PCI: mvebu: Check that PCI bridge specified in DT has function number zero
  PCI: mvebu: Check for errors from pci_bridge_emul_init() call
  PCI: mvebu: Check for valid ports
  arm: ioremap: Remove unused ARM-specific function pci_ioremap_io()
  arm: ioremap: Replace pci_ioremap_io() usage by pci_remap_iospace()
  PCI: mvebu: Remove custom mvebu_pci_host_probe() function
  PCI: mvebu: Replace pci_ioremap_io() usage by devm_pci_remap_iospace()
  arm: ioremap: Implement standard PCI function pci_remap_iospace()

10 files changed, 440 insertions, 149 deletions

diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index c576fa7d9bf8..0c70eb688a00 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -180,7 +180,10 @@ void pci_ioremap_set_mem_type(int mem_type);
 static inline void pci_ioremap_set_mem_type(int mem_type) {}
 #endif
 
-extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
+struct resource;
+
+#define pci_remap_iospace pci_remap_iospace
+int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
 
 /*
  * PCI configuration space mapping function.
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index ee91ac6b5ebf..2a493bdfffc6 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -38,6 +38,7 @@ static int num_pcie_ports;
 static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct pcie_port *pp;
+	struct resource realio;
 
 	if (nr >= num_pcie_ports)
 		return 0;
@@ -53,10 +54,10 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 
 	orion_pcie_setup(pp->base);
 
-	if (pp->index == 0)
-		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE);
-	else
-		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE);
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, pp->index == 0 ? DOVE_PCIE0_IO_PHYS_BASE :
+						    DOVE_PCIE1_IO_PHYS_BASE);
 
 	/*
 	 * IORESOURCE_MEM
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c
index ab0010dc3145..7a215d2ee7e2 100644
--- a/arch/arm/mach-iop32x/pci.c
+++ b/arch/arm/mach-iop32x/pci.c
@@ -185,6 +185,7 @@ iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
+	struct resource realio;
 
 	if (nr != 0)
 		return 0;
@@ -206,7 +207,9 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
 
 	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
 
-	pci_ioremap_io(0, IOP3XX_PCI_LOWER_IO_PA);
+	realio.start = 0;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, IOP3XX_PCI_LOWER_IO_PA);
 
 	return 1;
 }
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 636d84b40466..e15646af7f26 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -101,6 +101,7 @@ static void __init mv78xx0_pcie_preinit(void)
 static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct pcie_port *pp;
+	struct resource realio;
 
 	if (nr >= num_pcie_ports)
 		return 0;
@@ -115,7 +116,9 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
 	orion_pcie_setup(pp->base);
 
-	pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr));
+	realio.start = nr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, MV78XX0_PCIE_IO_PHYS_BASE(nr));
 
 	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
 
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 76951bfbacf5..92e938bba20d 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -142,6 +142,7 @@ static struct pci_ops pcie_ops = {
 static int __init pcie_setup(struct pci_sys_data *sys)
 {
 	struct resource *res;
+	struct resource realio;
 	int dev;
 
 	/*
@@ -164,7 +165,9 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 		pcie_ops.read = pcie_rd_conf_wa;
 	}
 
-	pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCIE_IO_PHYS_BASE);
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, ORION5X_PCIE_IO_PHYS_BASE);
 
 	/*
 	 * Request resources.
@@ -466,6 +469,7 @@ static void __init orion5x_setup_pci_wins(void)
 static int __init pci_setup(struct pci_sys_data *sys)
 {
 	struct resource *res;
+	struct resource realio;
 
 	/*
 	 * Point PCI unit MBUS decode windows to DRAM space.
@@ -482,7 +486,9 @@ static int __init pci_setup(struct pci_sys_data *sys)
 	 */
 	orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
 
-	pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCI_IO_PHYS_BASE);
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, ORION5X_PCI_IO_PHYS_BASE);
 
 	/*
 	 * Request resources
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 6e830b9418c9..197f8eb3a775 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -459,16 +459,20 @@ void pci_ioremap_set_mem_type(int mem_type)
 	pci_ioremap_mem_type = mem_type;
 }
 
-int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
+int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 {
-	BUG_ON(offset + SZ_64K - 1 > IO_SPACE_LIMIT);
+	unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start;
 
-	return ioremap_page_range(PCI_IO_VIRT_BASE + offset,
-				  PCI_IO_VIRT_BASE + offset + SZ_64K,
-				  phys_addr,
+	if (!(res->flags & IORESOURCE_IO))
+		return -EINVAL;
+
+	if (res->end > IO_SPACE_LIMIT)
+		return -EINVAL;
+
+	return ioremap_page_range(vaddr, vaddr + resource_size(res), phys_addr,
 				  __pgprot(get_mem_type(pci_ioremap_mem_type)->prot_pte));
 }
-EXPORT_SYMBOL_GPL(pci_ioremap_io);
+EXPORT_SYMBOL(pci_remap_iospace);
 
 void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size)
 {
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index ea0424922de7..db612045616f 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -914,6 +914,7 @@ int mvebu_mbus_add_window_remap_by_id(unsigned int target,
 
 	return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute);
 }
+EXPORT_SYMBOL_GPL(mvebu_mbus_add_window_remap_by_id);
 
 int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
 				phys_addr_t base, size_t size)
@@ -921,6 +922,7 @@ int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
 	return mvebu_mbus_add_window_remap_by_id(target, attribute, base,
 						 size, MVEBU_MBUS_NO_REMAP);
 }
+EXPORT_SYMBOL_GPL(mvebu_mbus_add_window_by_id);
 
 int mvebu_mbus_del_window(phys_addr_t base, size_t size)
 {
@@ -933,6 +935,7 @@ int mvebu_mbus_del_window(phys_addr_t base, size_t size)
 	mvebu_mbus_disable_window(&mbus_state, win);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mvebu_mbus_del_window);
 
 void mvebu_mbus_get_pcie_mem_aperture(struct resource *res)
 {
@@ -940,6 +943,7 @@ void mvebu_mbus_get_pcie_mem_aperture(struct resource *res)
 		return;
 	*res = mbus_state.pcie_mem_aperture;
 }
+EXPORT_SYMBOL_GPL(mvebu_mbus_get_pcie_mem_aperture);
 
 void mvebu_mbus_get_pcie_io_aperture(struct resource *res)
 {
@@ -947,6 +951,7 @@ void mvebu_mbus_get_pcie_io_aperture(struct resource *res)
 		return;
 	*res = mbus_state.pcie_io_aperture;
 }
+EXPORT_SYMBOL_GPL(mvebu_mbus_get_pcie_io_aperture);
 
 int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr)
 {
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index e14e84a0cc26..f7e44d9c6965 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -4,7 +4,7 @@ menu "PCI controller drivers"
 	depends on PCI
 
 config PCI_MVEBU
-	bool "Marvell EBU PCIe controller"
+	tristate "Marvell EBU PCIe controller"
 	depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST
 	depends on MVEBU_MBUS
 	depends on ARM
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index ed13e81cd691..d7de48c10bda 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -51,10 +52,14 @@
 	 PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
 	 PCIE_CONF_ADDR_EN)
 #define PCIE_CONF_DATA_OFF	0x18fc
+#define PCIE_INT_CAUSE_OFF	0x1900
+#define  PCIE_INT_PM_PME		BIT(28)
 #define PCIE_MASK_OFF		0x1910
 #define  PCIE_MASK_ENABLE_INTS          0x0f000000
 #define PCIE_CTRL_OFF		0x1a00
 #define  PCIE_CTRL_X1_MODE		0x0001
+#define  PCIE_CTRL_RC_MODE		BIT(1)
+#define  PCIE_CTRL_MASTER_HOT_RESET	BIT(24)
 #define PCIE_STAT_OFF		0x1a04
 #define  PCIE_STAT_BUS                  0xff00
 #define  PCIE_STAT_DEV                  0x1f0000
@@ -125,6 +130,11 @@ static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
 	return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
 }
 
+static u8 mvebu_pcie_get_local_bus_nr(struct mvebu_pcie_port *port)
+{
+	return (mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_BUS) >> 8;
+}
+
 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
 {
 	u32 stat;
@@ -145,22 +155,13 @@ static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
 	mvebu_writel(port, stat, PCIE_STAT_OFF);
 }
 
-/*
- * Setup PCIE BARs and Address Decode Wins:
- * BAR[0] -> internal registers (needed for MSI)
- * BAR[1] -> covers all DRAM banks
- * BAR[2] -> Disabled
- * WIN[0-3] -> DRAM bank[0-3]
- */
-static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
+static void mvebu_pcie_disable_wins(struct mvebu_pcie_port *port)
 {
-	const struct mbus_dram_target_info *dram;
-	u32 size;
 	int i;
 
-	dram = mv_mbus_dram_info();
+	mvebu_writel(port, 0, PCIE_BAR_LO_OFF(0));
+	mvebu_writel(port, 0, PCIE_BAR_HI_OFF(0));
 
-	/* First, disable and clear BARs and windows. */
 	for (i = 1; i < 3; i++) {
 		mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
 		mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
@@ -176,6 +177,25 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 	mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
 	mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
 	mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
+}
+
+/*
+ * Setup PCIE BARs and Address Decode Wins:
+ * BAR[0] -> internal registers (needed for MSI)
+ * BAR[1] -> covers all DRAM banks
+ * BAR[2] -> Disabled
+ * WIN[0-3] -> DRAM bank[0-3]
+ */
+static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
+{
+	const struct mbus_dram_target_info *dram;
+	u32 size;
+	int i;
+
+	dram = mv_mbus_dram_info();
+
+	/* First, disable and clear BARs and windows. */
+	mvebu_pcie_disable_wins(port);
 
 	/* Setup windows for DDR banks.  Count total DDR size on the fly. */
 	size = 0;
@@ -213,18 +233,47 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
 
 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 {
-	u32 cmd, mask;
+	u32 ctrl, cmd, dev_rev, mask;
 
-	/* Point PCIe unit MBUS decode windows to DRAM space. */
-	mvebu_pcie_setup_wins(port);
+	/* Setup PCIe controller to Root Complex mode. */
+	ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
+	ctrl |= PCIE_CTRL_RC_MODE;
+	mvebu_writel(port, ctrl, PCIE_CTRL_OFF);
 
-	/* Master + slave enable. */
+	/* Disable Root Bridge I/O space, memory space and bus mastering. */
 	cmd = mvebu_readl(port, PCIE_CMD_OFF);
-	cmd |= PCI_COMMAND_IO;
-	cmd |= PCI_COMMAND_MEMORY;
-	cmd |= PCI_COMMAND_MASTER;
+	cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 	mvebu_writel(port, cmd, PCIE_CMD_OFF);
 
+	/*
+	 * Change Class Code of PCI Bridge device to PCI Bridge (0x6004)
+	 * because default value is Memory controller (0x5080).
+	 *
+	 * Note that this mvebu PCI Bridge does not have compliant Type 1
+	 * Configuration Space. Header Type is reported as Type 0 and it
+	 * has format of Type 0 config space.
+	 *
+	 * Moreover Type 0 BAR registers (ranges 0x10 - 0x28 and 0x30 - 0x34)
+	 * have the same format in Marvell's specification as in PCIe
+	 * specification, but their meaning is totally different and they do
+	 * different things: they are aliased into internal mvebu registers
+	 * (e.g. PCIE_BAR_LO_OFF) and these should not be changed or
+	 * reconfigured by pci device drivers.
+	 *
+	 * Therefore driver uses emulation of PCI Bridge which emulates
+	 * access to configuration space via internal mvebu registers or
+	 * emulated configuration buffer. Driver access these PCI Bridge
+	 * directly for simplification, but these registers can be accessed
+	 * also via standard mvebu way for accessing PCI config space.
+	 */
+	dev_rev = mvebu_readl(port, PCIE_DEV_REV_OFF);
+	dev_rev &= ~0xffffff00;
+	dev_rev |= (PCI_CLASS_BRIDGE_PCI << 8) << 8;
+	mvebu_writel(port, dev_rev, PCIE_DEV_REV_OFF);
+
+	/* Point PCIe unit MBUS decode windows to DRAM space. */
+	mvebu_pcie_setup_wins(port);
+
 	/* Enable interrupt lines A-D. */
 	mask = mvebu_readl(port, PCIE_MASK_OFF);
 	mask |= PCIE_MASK_ENABLE_INTS;
@@ -250,6 +299,9 @@ static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
 	case 4:
 		*val = readl_relaxed(conf_data);
 		break;
+	default:
+		*val = 0xffffffff;
+		return PCIBIOS_BAD_REGISTER_NUMBER;
 	}
 
 	return PCIBIOS_SUCCESSFUL;
@@ -303,7 +355,7 @@ static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
  * areas each having a power of two size. We start from the largest
  * one (i.e highest order bit set in the size).
  */
-static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
+static int mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
 				   unsigned int target, unsigned int attribute,
 				   phys_addr_t base, size_t size,
 				   phys_addr_t remap)
@@ -324,7 +376,7 @@ static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
 				&base, &end, ret);
 			mvebu_pcie_del_windows(port, base - size_mapped,
 					       size_mapped);
-			return;
+			return ret;
 		}
 
 		size -= sz;
@@ -333,16 +385,20 @@ static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
 		if (remap != MVEBU_MBUS_NO_REMAP)
 			remap += sz;
 	}
+
+	return 0;
 }
 
-static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
+static int mvebu_pcie_set_window(struct mvebu_pcie_port *port,
 				  unsigned int target, unsigned int attribute,
 				  const struct mvebu_pcie_window *desired,
 				  struct mvebu_pcie_window *cur)
 {
+	int ret;
+
 	if (desired->base == cur->base && desired->remap == cur->remap &&
 	    desired->size == cur->size)
-		return;
+		return 0;
 
 	if (cur->size != 0) {
 		mvebu_pcie_del_windows(port, cur->base, cur->size);
@@ -357,31 +413,35 @@ static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
 	}
 
 	if (desired->size == 0)
-		return;
+		return 0;
+
+	ret = mvebu_pcie_add_windows(port, target, attribute, desired->base,
+				     desired->size, desired->remap);
+	if (ret) {
+		cur->size = 0;
+		cur->base = 0;
+		return ret;
+	}
 
-	mvebu_pcie_add_windows(port, target, attribute, desired->base,
-			       desired->size, desired->remap);
 	*cur = *desired;
+	return 0;
 }
 
-static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
+static int mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
 {
 	struct mvebu_pcie_window desired = {};
 	struct pci_bridge_emul_conf *conf = &port->bridge.conf;
 
 	/* Are the new iobase/iolimit values invalid? */
 	if (conf->iolimit < conf->iobase ||
-	    conf->iolimitupper < conf->iobaseupper ||
-	    !(conf->command & PCI_COMMAND_IO)) {
-		mvebu_pcie_set_window(port, port->io_target, port->io_attr,
-				      &desired, &port->iowin);
-		return;
-	}
+	    conf->iolimitupper < conf->iobaseupper)
+		return mvebu_pcie_set_window(port, port->io_target, port->io_attr,
+					     &desired, &port->iowin);
 
 	if (!mvebu_has_ioport(port)) {
 		dev_WARN(&port->pcie->pdev->dev,
 			 "Attempt to set IO when IO is disabled\n");
-		return;
+		return -EOPNOTSUPP;
 	}
 
 	/*
@@ -399,22 +459,19 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
 			desired.remap) +
 		       1;
 
-	mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
-			      &port->iowin);
+	return mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
+				     &port->iowin);
 }
 
-static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
+static int mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
 {
 	struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
 	struct pci_bridge_emul_conf *conf = &port->bridge.conf;
 
 	/* Are the new membase/memlimit values invalid? */
-	if (conf->memlimit < conf->membase ||
-	    !(conf->command & PCI_COMMAND_MEMORY)) {
-		mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
-				      &desired, &port->memwin);
-		return;
-	}
+	if (conf->memlimit < conf->membase)
+		return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
+					     &desired, &port->memwin);
 
 	/*
 	 * We read the PCI-to-PCI bridge emulated registers, and
@@ -426,8 +483,56 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
 	desired.size = (((conf->memlimit & 0xFFF0) << 16) | 0xFFFFF) -
 		       desired.base + 1;
 
-	mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
-			      &port->memwin);
+	return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
+				     &port->memwin);
+}
+
+static pci_bridge_emul_read_status_t
+mvebu_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
+				     int reg, u32 *value)
+{
+	struct mvebu_pcie_port *port = bridge->data;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		*value = mvebu_readl(port, PCIE_CMD_OFF);
+		break;
+
+	case PCI_PRIMARY_BUS: {
+		/*
+		 * From the whole 32bit register we support reading from HW only
+		 * secondary bus number which is mvebu local bus number.
+		 * Other bits are retrieved only from emulated config buffer.
+		 */
+		__le32 *cfgspace = (__le32 *)&bridge->conf;
+		u32 val = le32_to_cpu(cfgspace[PCI_PRIMARY_BUS / 4]);
+		val &= ~0xff00;
+		val |= mvebu_pcie_get_local_bus_nr(port) << 8;
+		*value = val;
+		break;
+	}
+
+	case PCI_INTERRUPT_LINE: {
+		/*
+		 * From the whole 32bit register we support reading from HW only
+		 * one bit: PCI_BRIDGE_CTL_BUS_RESET.
+		 * Other bits are retrieved only from emulated config buffer.
+		 */
+		__le32 *cfgspace = (__le32 *)&bridge->conf;
+		u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]);
+		if (mvebu_readl(port, PCIE_CTRL_OFF) & PCIE_CTRL_MASTER_HOT_RESET)
+			val |= PCI_BRIDGE_CTL_BUS_RESET << 16;
+		else
+			val &= ~(PCI_BRIDGE_CTL_BUS_RESET << 16);
+		*value = val;
+		break;
+	}
+
+	default:
+		return PCI_BRIDGE_EMUL_NOT_HANDLED;
+	}
+
+	return PCI_BRIDGE_EMUL_HANDLED;
 }
 
 static pci_bridge_emul_read_status_t
@@ -442,9 +547,7 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 		break;
 
 	case PCI_EXP_DEVCTL:
-		*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
-				 ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
-				   PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
+		*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
 		break;
 
 	case PCI_EXP_LNKCAP:
@@ -468,6 +571,18 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 		*value = mvebu_readl(port, PCIE_RC_RTSTA);
 		break;
 
+	case PCI_EXP_DEVCAP2:
+		*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP2);
+		break;
+
+	case PCI_EXP_DEVCTL2:
+		*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL2);
+		break;
+
+	case PCI_EXP_LNKCTL2:
+		*value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL2);
+		break;
+
 	default:
 		return PCI_BRIDGE_EMUL_NOT_HANDLED;
 	}
@@ -484,39 +599,62 @@ mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
 
 	switch (reg) {
 	case PCI_COMMAND:
-	{
-		if (!mvebu_has_ioport(port))
-			conf->command &= ~PCI_COMMAND_IO;
-
-		if ((old ^ new) & PCI_COMMAND_IO)
-			mvebu_pcie_handle_iobase_change(port);
-		if ((old ^ new) & PCI_COMMAND_MEMORY)
-			mvebu_pcie_handle_membase_change(port);
+		if (!mvebu_has_ioport(port)) {
+			conf->command = cpu_to_le16(
+				le16_to_cpu(conf->command) & ~PCI_COMMAND_IO);
+			new &= ~PCI_COMMAND_IO;
+		}
 
+		mvebu_writel(port, new, PCIE_CMD_OFF);
 		break;
-	}
 
 	case PCI_IO_BASE:
-		/*
-		 * We keep bit 1 set, it is a read-only bit that
-		 * indicates we support 32 bits addressing for the
-		 * I/O
-		 */
-		conf->iobase |= PCI_IO_RANGE_TYPE_32;
-		conf->iolimit |= PCI_IO_RANGE_TYPE_32;
-		mvebu_pcie_handle_iobase_change(port);
+		if ((mask & 0xffff) && mvebu_pcie_handle_iobase_change(port)) {
+			/* On error disable IO range */
+			conf->iobase &= ~0xf0;
+			conf->iolimit &= ~0xf0;
+			conf->iobaseupper = cpu_to_le16(0x0000);
+			conf->iolimitupper = cpu_to_le16(0x0000);
+			if (mvebu_has_ioport(port))
+				conf->iobase |= 0xf0;
+		}
 		break;
 
 	case PCI_MEMORY_BASE:
-		mvebu_pcie_handle_membase_change(port);
+		if (mvebu_pcie_handle_membase_change(port)) {
+			/* On error disable mem range */
+			conf->membase = cpu_to_le16(le16_to_cpu(conf->membase) & ~0xfff0);
+			conf->memlimit = cpu_to_le16(le16_to_cpu(conf->memlimit) & ~0xfff0);
+			conf->membase = cpu_to_le16(le16_to_cpu(conf->membase) | 0xfff0);
+		}
 		break;
 
 	case PCI_IO_BASE_UPPER16:
-		mvebu_pcie_handle_iobase_change(port);
+		if (mvebu_pcie_handle_iobase_change(port)) {
+			/* On error disable IO range */
+			conf->iobase &= ~0xf0;
+			conf->iolimit &= ~0xf0;
+			conf->iobaseupper = cpu_to_le16(0x0000);
+			conf->iolimitupper = cpu_to_le16(0x0000);
+			if (mvebu_has_ioport(port))
+				conf->iobase |= 0xf0;
+		}
 		break;
 
 	case PCI_PRIMARY_BUS:
-		mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus);
+		if (mask & 0xff00)
+			mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus);
+		break;
+
+	case PCI_INTERRUPT_LINE:
+		if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
+			u32 ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
+			if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16))
+				ctrl |= PCIE_CTRL_MASTER_HOT_RESET;
+			else
+				ctrl &= ~PCIE_CTRL_MASTER_HOT_RESET;
+			mvebu_writel(port, ctrl, PCIE_CTRL_OFF);
+		}
 		break;
 
 	default:
@@ -532,13 +670,6 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
 
 	switch (reg) {
 	case PCI_EXP_DEVCTL:
-		/*
-		 * Armada370 data says these bits must always
-		 * be zero when in root complex mode.
-		 */
-		new &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
-			 PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
-
 		mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
 		break;
 
@@ -555,12 +686,31 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
 		break;
 
 	case PCI_EXP_RTSTA:
-		mvebu_writel(port, new, PCIE_RC_RTSTA);
+		/*
+		 * PME Status bit in Root Status Register (PCIE_RC_RTSTA)
+		 * is read-only and can be cleared only by writing 0b to the
+		 * Interrupt Cause RW0C register (PCIE_INT_CAUSE_OFF). So
+		 * clear PME via Interrupt Cause.
+		 */
+		if (new & PCI_EXP_RTSTA_PME)
+			mvebu_writel(port, ~PCIE_INT_PM_PME, PCIE_INT_CAUSE_OFF);
+		break;
+
+	case PCI_EXP_DEVCTL2:
+		mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL2);
+		break;
+
+	case PCI_EXP_LNKCTL2:
+		mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL2);
+		break;
+
+	default:
 		break;
 	}
 }
 
 static struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
+	.read_base = mvebu_pci_bridge_emul_base_conf_read,
 	.write_base = mvebu_pci_bridge_emul_base_conf_write,
 	.read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
 	.write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
@@ -570,7 +720,7 @@ static struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
  * Initialize the configuration space of the PCI-to-PCI bridge
  * associated with the given PCIe interface.
  */
-static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
+static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
 {
 	struct pci_bridge_emul *bridge = &port->bridge;
 
@@ -589,7 +739,7 @@ static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
 	bridge->data = port;
 	bridge->ops = &mvebu_pci_bridge_emul_ops;
 
-	pci_bridge_emul_init(bridge, PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR);
+	return pci_bridge_emul_init(bridge, PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR);
 }
 
 static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
@@ -606,6 +756,9 @@ static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
 	for (i = 0; i < pcie->nports; i++) {
 		struct mvebu_pcie_port *port = &pcie->ports[i];
 
+		if (!port->base)
+			continue;
+
 		if (bus->number == 0 && port->devfn == devfn)
 			return port;
 		if (bus->number != 0 &&
@@ -680,6 +833,15 @@ static struct pci_ops mvebu_pcie_ops = {
 	.write = mvebu_pcie_wr_conf,
 };
 
+static int mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	/* Interrupt support on mvebu emulated bridges is not implemented yet */
+	if (dev->bus->number == 0)
+		return 0; /* Proper return code 0 == NO_IRQ */
+
+	return of_irq_parse_and_map_pci(dev, slot, pin);
+}
+
 static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
 						 const struct resource *res,
 						 resource_size_t start,
@@ -781,6 +943,8 @@ static int mvebu_pcie_suspend(struct device *dev)
 	pcie = dev_get_drvdata(dev);
 	for (i = 0; i < pcie->nports; i++) {
 		struct mvebu_pcie_port *port = pcie->ports + i;
+		if (!port->base)
+			continue;
 		port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
 	}
 
@@ -795,6 +959,8 @@ static int mvebu_pcie_resume(struct device *dev)
 	pcie = dev_get_drvdata(dev);
 	for (i = 0; i < pcie->nports; i++) {
 		struct mvebu_pcie_port *port = pcie->ports + i;
+		if (!port->base)
+			continue;
 		mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
 		mvebu_pcie_setup_hw(port);
 	}
@@ -838,6 +1004,11 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	port->devfn = of_pci_get_devfn(child);
 	if (port->devfn < 0)
 		goto skip;
+	if (PCI_FUNC(port->devfn) != 0) {
+		dev_err(dev, "%s: invalid function number, must be zero\n",
+			port->name);
+		goto skip;
+	}
 
 	ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
 				 &port->mem_target, &port->mem_attr);
@@ -992,6 +1163,10 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
 					 resource_size(&pcie->io) - 1);
 		pcie->realio.name = "PCI I/O";
 
+		ret = devm_pci_remap_iospace(dev, &pcie->realio, pcie->io.start);
+		if (ret)
+			return ret;
+
 		pci_add_resource(&bridge->windows, &pcie->realio);
 		ret = devm_request_resource(dev, &ioport_resource, &pcie->realio);
 		if (ret)
@@ -1001,54 +1176,6 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
 	return 0;
 }
 
-/*
- * This is a copy of pci_host_probe(), except that it does the I/O
- * remap as the last step, once we are sure we won't fail.
- *
- * It should be removed once the I/O remap error handling issue has
- * been sorted out.
- */
-static int mvebu_pci_host_probe(struct pci_host_bridge *bridge)
-{
-	struct mvebu_pcie *pcie;
-	struct pci_bus *bus, *child;
-	int ret;
-
-	ret = pci_scan_root_bus_bridge(bridge);
-	if (ret < 0) {
-		dev_err(bridge->dev.parent, "Scanning root bridge failed");
-		return ret;
-	}
-
-	pcie = pci_host_bridge_priv(bridge);
-	if (resource_size(&pcie->io) != 0) {
-		unsigned int i;
-
-		for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
-			pci_ioremap_io(i, pcie->io.start + i);
-	}
-
-	bus = bridge->bus;
-
-	/*
-	 * We insert PCI resources into the iomem_resource and
-	 * ioport_resource trees in either pci_bus_claim_resources()
-	 * or pci_bus_assign_resources().
-	 */
-	if (pci_has_flag(PCI_PROBE_ONLY)) {
-		pci_bus_claim_resources(bus);
-	} else {
-		pci_bus_size_bridges(bus);
-		pci_bus_assign_resources(bus);
-
-		list_for_each_entry(child, &bus->children, node)
-			pcie_bus_configure_settings(child);
-	}
-
-	pci_bus_add_devices(bus);
-	return 0;
-}
-
 static int mvebu_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1112,9 +1239,93 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
 			continue;
 		}
 
+		ret = mvebu_pci_bridge_emul_init(port);
+		if (ret < 0) {
+			dev_err(dev, "%s: cannot init emulated bridge\n",
+				port->name);
+			devm_iounmap(dev, port->base);
+			port->base = NULL;
+			mvebu_pcie_powerdown(port);
+			continue;
+		}
+
+		/*
+		 * PCIe topology exported by mvebu hw is quite complicated. In
+		 * reality has something like N fully independent host bridges
+		 * where each host bridge has one PCIe Root Port (which acts as
+		 * PCI Bridge device). Each host bridge has its own independent
+		 * internal registers, independent access to PCI config space,
+		 * independent interrupt lines, independent window and memory
+		 * access configuration. But additionally there is some kind of
+		 * peer-to-peer support between PCIe devices behind different
+		 * host bridges limited just to forwarding of memory and I/O
+		 * transactions (forwarding of error messages and config cycles
+		 * is not supported). So we could say there are N independent
+		 * PCIe Root Complexes.
+		 *
+		 * For this kind of setup DT should have been structured into
+		 * N independent PCIe controllers / host bridges. But instead
+		 * structure in past was defined to put PCIe Root Ports of all
+		 * host bridges into one bus zero, like in classic multi-port
+		 * Root Complex setup with just one host bridge.
+		 *
+		 * This means that pci-mvebu.c driver provides "virtual" bus 0
+		 * on which registers all PCIe Root Ports (PCI Bridge devices)
+		 * specified in DT by their BDF addresses and virtually routes
+		 * PCI config access of each PCI bridge device to specific PCIe
+		 * host bridge.
+		 *
+		 * Normally PCI Bridge should choose between Type 0 and Type 1
+		 * config requests based on primary and secondary bus numbers
+		 * configured on the bridge itself. But because mvebu PCI Bridge
+		 * does not have registers for primary and secondary bus numbers
+		 * in its config space, it determinates type of config requests
+		 * via its own custom way.
+		 *
+		 * There are two options how mvebu determinate type of config
+		 * request.
+		 *
+		 * 1. If Secondary Bus Number Enable bit is not set or is not
+		 * available (applies for pre-XP PCIe controllers) then Type 0
+		 * is used if target bus number equals Local Bus Number (bits
+		 * [15:8] in register 0x1a04) and target device number differs
+		 * from Local Device Number (bits [20:16] in register 0x1a04).
+		 * Type 1 is used if target bus number differs from Local Bus
+		 * Number. And when target bus number equals Local Bus Number
+		 * and target device equals Local Device Number then request is
+		 * routed to Local PCI Bridge (PCIe Root Port).
+		 *
+		 * 2. If Secondary Bus Number Enable bit is set (bit 7 in
+		 * register 0x1a2c) then mvebu hw determinate type of config
+		 * request like compliant PCI Bridge based on primary bus number
+		 * which is configured via Local Bus Number (bits [15:8] in
+		 * register 0x1a04) and secondary bus number which is configured
+		 * via Secondary Bus Number (bits [7:0] in register 0x1a2c).
+		 * Local PCI Bridge (PCIe Root Port) is available on primary bus
+		 * as device with Local Device Number (bits [20:16] in register
+		 * 0x1a04).
+		 *
+		 * Secondary Bus Number Enable bit is disabled by default and
+		 * option 2. is not available on pre-XP PCIe controllers. Hence
+		 * this driver always use option 1.
+		 *
+		 * Basically it means that primary and secondary buses shares
+		 * one virtual number configured via Local Bus Number bits and
+		 * Local Device Number bits determinates if accessing primary
+		 * or secondary bus. Set Local Device Number to 1 and redirect
+		 * all writes of PCI Bridge Secondary Bus Number register to
+		 * Local Bus Number (bits [15:8] in register 0x1a04).
+		 *
+		 * So when accessing devices on buses behind secondary bus
+		 * number it would work correctly. And also when accessing
+		 * device 0 at secondary bus number via config space would be
+		 * correctly routed to secondary bus. Due to issues described
+		 * in mvebu_pcie_setup_hw(), PCI Bridges at primary bus (zero)
+		 * are not accessed directly via PCI config space but rarher
+		 * indirectly via kernel emulated PCI bridge driver.
+		 */
 		mvebu_pcie_setup_hw(port);
-		mvebu_pcie_set_local_dev_nr(port, 1);
-		mvebu_pci_bridge_emul_init(port);
+		mvebu_pcie_set_local_dev_nr(port, 0);
 	}
 
 	pcie->nports = i;
@@ -1122,8 +1333,55 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
 	bridge->sysdata = pcie;
 	bridge->ops = &mvebu_pcie_ops;
 	bridge->align_resource = mvebu_pcie_align_resource;
+	bridge->map_irq = mvebu_pcie_map_irq;
+
+	return pci_host_probe(bridge);
+}
+
+static int mvebu_pcie_remove(struct platform_device *pdev)
+{
+	struct mvebu_pcie *pcie = platform_get_drvdata(pdev);
+	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
+	u32 cmd;
+	int i;
+
+	/* Remove PCI bus with all devices. */
+	pci_lock_rescan_remove();
+	pci_stop_root_bus(bridge->bus);
+	pci_remove_root_bus(bridge->bus);
+	pci_unlock_rescan_remove();
+
+	for (i = 0; i < pcie->nports; i++) {
+		struct mvebu_pcie_port *port = &pcie->ports[i];
 
-	return mvebu_pci_host_probe(bridge);
+		if (!port->base)
+			continue;
+
+		/* Disable Root Bridge I/O space, memory space and bus mastering. */
+		cmd = mvebu_readl(port, PCIE_CMD_OFF);
+		cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+		mvebu_writel(port, cmd, PCIE_CMD_OFF);
+
+		/* Mask all interrupt sources. */
+		mvebu_writel(port, 0, PCIE_MASK_OFF);
+
+		/* Free config space for emulated root bridge. */
+		pci_bridge_emul_cleanup(&port->bridge);
+
+		/* Disable and clear BARs and windows. */
+		mvebu_pcie_disable_wins(port);
+
+		/* Delete PCIe IO and MEM windows. */
+		if (port->iowin.size)
+			mvebu_pcie_del_windows(port, port->iowin.base, port->iowin.size);
+		if (port->memwin.size)
+			mvebu_pcie_del_windows(port, port->memwin.base, port->memwin.size);
+
+		/* Power down card and disable clocks. Must be the last step. */
+		mvebu_pcie_powerdown(port);
+	}
+
+	return 0;
 }
 
 static const struct of_device_id mvebu_pcie_of_match_table[] = {
@@ -1142,10 +1400,14 @@ static struct platform_driver mvebu_pcie_driver = {
 	.driver = {
 		.name = "mvebu-pcie",
 		.of_match_table = mvebu_pcie_of_match_table,
-		/* driver unloading/unbinding currently not supported */
-		.suppress_bind_attrs = true,
 		.pm = &mvebu_pcie_pm_ops,
 	},
 	.probe = mvebu_pcie_probe,
+	.remove = mvebu_pcie_remove,
 };
-builtin_platform_driver(mvebu_pcie_driver);
+module_platform_driver(mvebu_pcie_driver);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@bootlin.com>");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
+MODULE_DESCRIPTION("Marvell EBU PCIe controller");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 6b1edfc890a3..92df2c2c5d07 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -20,6 +20,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
+#include <linux/pci.h>
 #include <linux/regmap.h>
 
 #include <pcmcia/ss.h>
@@ -230,6 +231,7 @@ static int at91_cf_probe(struct platform_device *pdev)
 	struct at91_cf_socket	*cf;
 	struct at91_cf_data	*board;
 	struct resource		*io;
+	struct resource		realio;
 	int			status;
 
 	board = devm_kzalloc(&pdev->dev, sizeof(*board), GFP_KERNEL);
@@ -307,7 +309,9 @@ static int at91_cf_probe(struct platform_device *pdev)
 	 * io_offset is set to 0x10000 to avoid the check in static_find_io().
 	 * */
 	cf->socket.io_offset = 0x10000;
-	status = pci_ioremap_io(0x10000, cf->phys_baseaddr + CF_IO_PHYS);
+	realio.start = cf->socket.io_offset;
+	realio.end = realio.start + SZ_64K - 1;
+	status = pci_remap_iospace(&realio, cf->phys_baseaddr + CF_IO_PHYS);
 	if (status)
 		goto fail0a;