Merge tag 'for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - test_power: add support for current and charge_counter

 - cpcap-charger: improve charge calculation and limit default charge
   voltage

 - ab8500: convert to IIO

 - misc small fixes all over drivers

* tag 'for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits)
  power: supply: bd70528: Add MODULE_ALIAS to allow module auto loading
  power: supply: ab8500_charger: Fix inconsistent IS_ERR and PTR_ERR
  power: supply: cpcap-charger: cpcap_charger_voltage_to_regval() can be static
  power: supply: cpcap-battery: Add basic coulomb counter calibrate support
  power: supply: cpcap-battery: Read and save integrator register CCI
  power: supply: cpcap-battery: Simplify short term power average calculation
  power: supply: cpcap-battery: Simplify coulomb counter calculation with div_s64
  power: supply: cpcap-battery: Move coulomb counter units per lsb to ddata
  power: supply: cpcap-charger: Allow changing constant charge voltage
  power: supply: cpcap-battery: Fix handling of lowered charger voltage
  power: supply: cpcap-charger: Improve battery detection
  power: supply: cpcap-battery: Check voltage before orderly_poweroff
  power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  power: supply: ab8500: Handle invalid IRQ from platform_get_irq_byname()
  power: supply: ab8500_fg: Do not free non-requested IRQs in probe's error path
  power: supply: ab8500: Cleanup probe in reverse order
  power: reset: at91: fix __le32 cast in reset code
  power: supply: abx500_chargalg: Fix code indentation
  mfd: Switch the AB8500 GPADC to IIO
  iio: adc: New driver for the AB8500 GPADC
  ...

26 files changed, 2044 insertions, 2030 deletions

diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index cd9e90c5d171..b6bc30d7777e 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -69,6 +69,18 @@ Required child device properties:
 - compatible             : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
                                                pwm|regulator|rtc|sysctrl|usb]";
 
+  A few child devices require ADC channels from the GPADC node. Those follow the
+  standard bindings from iio/iio-bindings.txt and iio/adc/adc.txt
+
+  abx500-temp		 : io-channels "aux1" and "aux2" for measuring external
+			   temperatures.
+  ab8500-fg		 : io-channel "main_bat_v" for measuring main battery voltage,
+  ab8500-btemp		 : io-channels "btemp_ball" and "bat_ctrl" for measuring the
+			   battery voltage.
+  ab8500-charger	 : io-channels "main_charger_v", "main_charger_c", "vbus_v",
+			   "usb_charger_c" for measuring voltage and current of the
+			   different charging supplies.
+
 Optional child device properties:
 - interrupts             : contains the device IRQ(s) using the 2-cell format (see above)
 - interrupt-names        : contains names of IRQ resource in the order in which they were
@@ -102,8 +114,115 @@ ab8500 {
                               39 0x4>;
                 interrupt-names = "HW_CONV_END", "SW_CONV_END";
                 vddadc-supply = <&ab8500_ldo_tvout_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#io-channel-cells = <1>;
+
+		/* GPADC channels */
+		bat_ctrl: channel@1 {
+			reg = <0x01>;
+		};
+		btemp_ball: channel@2 {
+			reg = <0x02>;
+		};
+		main_charger_v: channel@3 {
+			reg = <0x03>;
+		};
+		acc_detect1: channel@4 {
+			reg = <0x04>;
+		};
+		acc_detect2: channel@5 {
+			reg = <0x05>;
+		};
+		adc_aux1: channel@6 {
+			reg = <0x06>;
+		};
+		adc_aux2: channel@7 {
+			reg = <0x07>;
+		};
+		main_batt_v: channel@8 {
+			reg = <0x08>;
+		};
+		vbus_v: channel@9 {
+			reg = <0x09>;
+		};
+		main_charger_c: channel@a {
+			reg = <0x0a>;
+		};
+		usb_charger_c: channel@b {
+			reg = <0x0b>;
+		};
+		bk_bat_v: channel@c {
+			reg = <0x0c>;
+		};
+		die_temp: channel@d {
+			reg = <0x0d>;
+		};
+		usb_id: channel@e {
+			reg = <0x0e>;
+		};
+		xtal_temp: channel@12 {
+			reg = <0x12>;
+		};
+		vbat_true_meas: channel@13 {
+			reg = <0x13>;
+		};
+		bat_ctrl_and_ibat: channel@1c {
+			reg = <0x1c>;
+		};
+		vbat_meas_and_ibat: channel@1d {
+			reg = <0x1d>;
+		};
+		vbat_true_meas_and_ibat: channel@1e {
+			reg = <0x1e>;
+		};
+		bat_temp_and_ibat: channel@1f {
+			reg = <0x1f>;
+		};
         };
 
+	ab8500_temp {
+		compatible = "stericsson,abx500-temp";
+		io-channels = <&gpadc 0x06>,
+			      <&gpadc 0x07>;
+		io-channel-name = "aux1", "aux2";
+	};
+
+	ab8500_battery: ab8500_battery {
+		stericsson,battery-type = "LIPO";
+		thermistor-on-batctrl;
+	};
+
+	ab8500_fg {
+		compatible = "stericsson,ab8500-fg";
+		battery	   = <&ab8500_battery>;
+		io-channels = <&gpadc 0x08>;
+		io-channel-name = "main_bat_v";
+	};
+
+	ab8500_btemp {
+		compatible = "stericsson,ab8500-btemp";
+		battery	   = <&ab8500_battery>;
+		io-channels = <&gpadc 0x02>,
+			      <&gpadc 0x01>;
+		io-channel-name = "btemp_ball",
+				"bat_ctrl";
+	};
+
+	ab8500_charger {
+		compatible	= "stericsson,ab8500-charger";
+		battery		= <&ab8500_battery>;
+		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+		io-channels = <&gpadc 0x03>,
+			      <&gpadc 0x0a>,
+			      <&gpadc 0x09>,
+			      <&gpadc 0x0b>;
+		io-channel-name = "main_charger_v",
+				"main_charger_c",
+				"vbus_v",
+				"usb_charger_c";
+	};
+
         ab8500-usb {
                 compatible = "stericsson,ab8500-usb";
                 interrupts = < 90 0x4
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
index 80bd873c3b1d..6048f636783f 100644
--- a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
@@ -5,7 +5,8 @@ Required properties:
 - interrupts: Interrupt specifier for each name in interrupt-names
 - interrupt-names: Should contain the following entries:
 		   "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-		   "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"
+		   "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+		   "battdetb"
 - io-channels: IIO ADC channel specifier for each name in io-channel-names
 - io-channel-names: Should contain the following entries:
 		    "battdetb", "battp", "vbus", "chg_isense", "batti"
@@ -21,11 +22,13 @@ cpcap_charger: charger {
 	compatible = "motorola,mapphone-cpcap-charger";
 	interrupts-extended = <
 		&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
-		&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+		&cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0
+		&cpcap 54 0
 	>;
 	interrupt-names =
 		"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-		"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+		"rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+		"battdetb";
 	mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
 		      &gpio3 23 GPIO_ACTIVE_LOW>;
 	io-channels = <&cpcap_adc 0 &cpcap_adc 1
diff --git a/MAINTAINERS b/MAINTAINERS
index 08bbf9649a1b..ee326c051612 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2021,6 +2021,7 @@ F:	drivers/dma/ste_dma40*
 F:	drivers/hwspinlock/u8500_hsem.c
 F:	drivers/i2c/busses/i2c-nomadik.c
 F:	drivers/i2c/busses/i2c-stu300.c
+F:	drivers/iio/adc/ab8500-gpadc.c
 F:	drivers/mfd/ab3100*
 F:	drivers/mfd/ab8500*
 F:	drivers/mfd/abx500*
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index d1eae47b83f6..08bae935605c 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -43,11 +43,13 @@
 			compatible = "motorola,mapphone-cpcap-charger";
 			interrupts-extended = <
 				&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
-				&cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
+				&cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0
+				&cpcap 54 0
 			>;
 			interrupt-names =
 				"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-				"rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
+				"rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+				"battdetb";
 			mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
 				      &gpio3 23 GPIO_ACTIVE_LOW>;
 			io-channels = <&cpcap_adc 0 &cpcap_adc 1
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 13a6b4afb4b3..5308c59d7001 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -40,7 +40,8 @@ comment "Native drivers"
 
 config SENSORS_AB8500
 	tristate "AB8500 thermal monitoring"
-	depends on AB8500_GPADC && AB8500_BM
+	depends on AB8500_GPADC && AB8500_BM && (IIO = y)
+	default n
 	help
 	  If you say yes here you get support for the thermal sensor part
 	  of the AB8500 chip. The driver includes thermal management for
diff --git a/drivers/hwmon/ab8500.c b/drivers/hwmon/ab8500.c
index 207f77f85a40..53f3379d799d 100644
--- a/drivers/hwmon/ab8500.c
+++ b/drivers/hwmon/ab8500.c
@@ -17,20 +17,24 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/power/ab8500.h>
 #include <linux/reboot.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
+#include <linux/iio/consumer.h>
 #include "abx500.h"
 
 #define DEFAULT_POWER_OFF_DELAY	(HZ * 10)
 #define THERMAL_VCC		1800
 #define PULL_UP_RESISTOR	47000
-/* Number of monitored sensors should not greater than NUM_SENSORS */
-#define NUM_MONITORED_SENSORS	4
+
+#define AB8500_SENSOR_AUX1		0
+#define AB8500_SENSOR_AUX2		1
+#define AB8500_SENSOR_BTEMP_BALL	2
+#define AB8500_SENSOR_BAT_CTRL		3
+#define NUM_MONITORED_SENSORS		4
 
 struct ab8500_gpadc_cfg {
 	const struct abx500_res_to_temp *temp_tbl;
@@ -40,7 +44,8 @@ struct ab8500_gpadc_cfg {
 };
 
 struct ab8500_temp {
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *aux1;
+	struct iio_channel *aux2;
 	struct ab8500_btemp *btemp;
 	struct delayed_work power_off_work;
 	struct ab8500_gpadc_cfg cfg;
@@ -82,15 +87,21 @@ static int ab8500_read_sensor(struct abx500_temp *data, u8 sensor, int *temp)
 	int voltage, ret;
 	struct ab8500_temp *ab8500_data = data->plat_data;
 
-	if (sensor == BAT_CTRL) {
-		*temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
-	} else if (sensor == BTEMP_BALL) {
+	if (sensor == AB8500_SENSOR_BTEMP_BALL) {
 		*temp = ab8500_btemp_get_temp(ab8500_data->btemp);
-	} else {
-		voltage = ab8500_gpadc_convert(ab8500_data->gpadc, sensor);
-		if (voltage < 0)
-			return voltage;
-
+	} else if (sensor == AB8500_SENSOR_BAT_CTRL) {
+		*temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
+	} else if (sensor == AB8500_SENSOR_AUX1) {
+		ret = iio_read_channel_processed(ab8500_data->aux1, &voltage);
+		if (ret < 0)
+			return ret;
+		ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
+		if (ret < 0)
+			return ret;
+	} else if (sensor == AB8500_SENSOR_AUX2) {
+		ret = iio_read_channel_processed(ab8500_data->aux2, &voltage);
+		if (ret < 0)
+			return ret;
 		ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
 		if (ret < 0)
 			return ret;
@@ -164,10 +175,6 @@ int abx500_hwmon_init(struct abx500_temp *data)
 	if (!ab8500_data)
 		return -ENOMEM;
 
-	ab8500_data->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	if (IS_ERR(ab8500_data->gpadc))
-		return PTR_ERR(ab8500_data->gpadc);
-
 	ab8500_data->btemp = ab8500_btemp_get();
 	if (IS_ERR(ab8500_data->btemp))
 		return PTR_ERR(ab8500_data->btemp);
@@ -181,15 +188,25 @@ int abx500_hwmon_init(struct abx500_temp *data)
 	ab8500_data->cfg.tbl_sz = ab8500_temp_tbl_a_size;
 
 	data->plat_data = ab8500_data;
+	ab8500_data->aux1 = devm_iio_channel_get(&data->pdev->dev, "aux1");
+	if (IS_ERR(ab8500_data->aux1)) {
+		if (PTR_ERR(ab8500_data->aux1) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&data->pdev->dev, "failed to get AUX1 ADC channel\n");
+		return PTR_ERR(ab8500_data->aux1);
+	}
+	ab8500_data->aux2 = devm_iio_channel_get(&data->pdev->dev, "aux2");
+	if (IS_ERR(ab8500_data->aux2)) {
+		if (PTR_ERR(ab8500_data->aux2) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&data->pdev->dev, "failed to get AUX2 ADC channel\n");
+		return PTR_ERR(ab8500_data->aux2);
+	}
 
-	/*
-	 * ADC_AUX1 and ADC_AUX2, connected to external NTC
-	 * BTEMP_BALL and BAT_CTRL, fixed usage
-	 */
-	data->gpadc_addr[0] = ADC_AUX1;
-	data->gpadc_addr[1] = ADC_AUX2;
-	data->gpadc_addr[2] = BTEMP_BALL;
-	data->gpadc_addr[3] = BAT_CTRL;
+	data->gpadc_addr[0] = AB8500_SENSOR_AUX1;
+	data->gpadc_addr[1] = AB8500_SENSOR_AUX2;
+	data->gpadc_addr[2] = AB8500_SENSOR_BTEMP_BALL;
+	data->gpadc_addr[3] = AB8500_SENSOR_BAT_CTRL;
 	data->monitored_sensors = NUM_MONITORED_SENSORS;
 
 	data->ops.read_sensor = ab8500_read_sensor;
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index f0af3a42f53c..0b21dd405dd5 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -6,6 +6,16 @@
 
 menu "Analog to digital converters"
 
+config AB8500_GPADC
+	bool "ST-Ericsson AB8500 GPADC driver"
+	depends on AB8500_CORE && REGULATOR_AB8500
+	default y
+	help
+	  AB8500 Analog Baseband, mixed signal integrated circuit GPADC
+	  (General Purpose Analog to Digital Converter) driver used to monitor
+	  internal voltages, convert accessory and battery, AC (charger, mains)
+	  and USB voltages integral to the U8500 platform.
+
 config AD_SIGMA_DELTA
 	tristate
 	select IIO_BUFFER
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ef9cc485fb67..fc1b6ebb0cde 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -4,6 +4,7 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
 obj-$(CONFIG_AD7124) += ad7124.o
 obj-$(CONFIG_AD7266) += ad7266.o
diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c
new file mode 100644
index 000000000000..fd5b18d7f0c2
--- /dev/null
+++ b/drivers/iio/adc/ab8500-gpadc.c
@@ -0,0 +1,1218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Arun R Murthy <arun.murthy@stericsson.com>
+ * Author: Daniel Willerud <daniel.willerud@stericsson.com>
+ * Author: Johan Palsson <johan.palsson@stericsson.com>
+ * Author: M'boumba Cedric Madianga
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * AB8500 General Purpose ADC driver. The AB8500 uses reference voltages:
+ * VinVADC, and VADC relative to GND to do its job. It monitors main and backup
+ * battery voltages, AC (mains) voltage, USB cable voltage, as well as voltages
+ * representing the temperature of the chip die and battery, accessory
+ * detection by resistance measurements using relative voltages and GSM burst
+ * information.
+ *
+ * Some of the voltages are measured on external pins on the IC, such as
+ * battery temperature or "ADC aux" 1 and 2. Other voltages are internal rails
+ * from other parts of the ASIC such as main charger voltage, main and battery
+ * backup voltage or USB VBUS voltage. For this reason drivers for other
+ * parts of the system are required to obtain handles to the ADC to do work
+ * for them and the IIO driver provides arbitration among these consumers.
+ */
+#include <linux/init.h>
+#include <linux/bits.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+#include <linux/random.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+
+/* GPADC register offsets and bit definitions */
+
+#define AB8500_GPADC_CTRL1_REG		0x00
+/* GPADC control register 1 bits */
+#define AB8500_GPADC_CTRL1_DISABLE		0x00
+#define AB8500_GPADC_CTRL1_ENABLE		BIT(0)
+#define AB8500_GPADC_CTRL1_TRIG_ENA		BIT(1)
+#define AB8500_GPADC_CTRL1_START_SW_CONV	BIT(2)
+#define AB8500_GPADC_CTRL1_BTEMP_PULL_UP	BIT(3)
+/* 0 = use rising edge, 1 = use falling edge */
+#define AB8500_GPADC_CTRL1_TRIG_EDGE		BIT(4)
+/* 0 = use VTVOUT, 1 = use VRTC as pull-up supply for battery temp NTC */
+#define AB8500_GPADC_CTRL1_PUPSUPSEL		BIT(5)
+#define AB8500_GPADC_CTRL1_BUF_ENA		BIT(6)
+#define AB8500_GPADC_CTRL1_ICHAR_ENA		BIT(7)
+
+#define AB8500_GPADC_CTRL2_REG		0x01
+#define AB8500_GPADC_CTRL3_REG		0x02
+/*
+ * GPADC control register 2 and 3 bits
+ * the bit layout is the same for SW and HW conversion set-up
+ */
+#define AB8500_GPADC_CTRL2_AVG_1		0x00
+#define AB8500_GPADC_CTRL2_AVG_4		BIT(5)
+#define AB8500_GPADC_CTRL2_AVG_8		BIT(6)
+#define AB8500_GPADC_CTRL2_AVG_16		(BIT(5) | BIT(6))
+
+enum ab8500_gpadc_channel {
+	AB8500_GPADC_CHAN_UNUSED = 0x00,
+	AB8500_GPADC_CHAN_BAT_CTRL = 0x01,
+	AB8500_GPADC_CHAN_BAT_TEMP = 0x02,
+	/* This is not used on AB8505 */
+	AB8500_GPADC_CHAN_MAIN_CHARGER = 0x03,
+	AB8500_GPADC_CHAN_ACC_DET_1 = 0x04,
+	AB8500_GPADC_CHAN_ACC_DET_2 = 0x05,
+	AB8500_GPADC_CHAN_ADC_AUX_1 = 0x06,
+	AB8500_GPADC_CHAN_ADC_AUX_2 = 0x07,
+	AB8500_GPADC_CHAN_VBAT_A = 0x08,
+	AB8500_GPADC_CHAN_VBUS = 0x09,
+	AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT = 0x0a,
+	AB8500_GPADC_CHAN_USB_CHARGER_CURRENT = 0x0b,
+	AB8500_GPADC_CHAN_BACKUP_BAT = 0x0c,
+	/* Only on AB8505 */
+	AB8505_GPADC_CHAN_DIE_TEMP = 0x0d,
+	AB8500_GPADC_CHAN_ID = 0x0e,
+	AB8500_GPADC_CHAN_INTERNAL_TEST_1 = 0x0f,
+	AB8500_GPADC_CHAN_INTERNAL_TEST_2 = 0x10,
+	AB8500_GPADC_CHAN_INTERNAL_TEST_3 = 0x11,
+	/* FIXME: Applicable to all ASIC variants? */
+	AB8500_GPADC_CHAN_XTAL_TEMP = 0x12,
+	AB8500_GPADC_CHAN_VBAT_TRUE_MEAS = 0x13,
+	/* FIXME: Doesn't seem to work with pure AB8500 */
+	AB8500_GPADC_CHAN_BAT_CTRL_AND_IBAT = 0x1c,
+	AB8500_GPADC_CHAN_VBAT_MEAS_AND_IBAT = 0x1d,
+	AB8500_GPADC_CHAN_VBAT_TRUE_MEAS_AND_IBAT = 0x1e,
+	AB8500_GPADC_CHAN_BAT_TEMP_AND_IBAT = 0x1f,
+	/*
+	 * Virtual channel used only for ibat conversion to ampere.
+	 * Battery current conversion (ibat) cannot be requested as a
+	 * single conversion but it is always requested in combination
+	 * with other input requests.
+	 */
+	AB8500_GPADC_CHAN_IBAT_VIRTUAL = 0xFF,
+};
+
+#define AB8500_GPADC_AUTO_TIMER_REG	0x03
+
+#define AB8500_GPADC_STAT_REG		0x04
+#define AB8500_GPADC_STAT_BUSY		BIT(0)
+
+#define AB8500_GPADC_MANDATAL_REG	0x05
+#define AB8500_GPADC_MANDATAH_REG	0x06
+#define AB8500_GPADC_AUTODATAL_REG	0x07
+#define AB8500_GPADC_AUTODATAH_REG	0x08
+#define AB8500_GPADC_MUX_CTRL_REG	0x09
+#define AB8540_GPADC_MANDATA2L_REG	0x09
+#define AB8540_GPADC_MANDATA2H_REG	0x0A
+#define AB8540_GPADC_APEAAX_REG		0x10
+#define AB8540_GPADC_APEAAT_REG		0x11
+#define AB8540_GPADC_APEAAM_REG		0x12
+#define AB8540_GPADC_APEAAH_REG		0x13
+#define AB8540_GPADC_APEAAL_REG		0x14
+
+/*
+ * OTP register offsets
+ * Bank : 0x15
+ */
+#define AB8500_GPADC_CAL_1	0x0F
+#define AB8500_GPADC_CAL_2	0x10
+#define AB8500_GPADC_CAL_3	0x11
+#define AB8500_GPADC_CAL_4	0x12
+#define AB8500_GPADC_CAL_5	0x13
+#define AB8500_GPADC_CAL_6	0x14
+#define AB8500_GPADC_CAL_7	0x15
+/* New calibration for 8540 */
+#define AB8540_GPADC_OTP4_REG_7	0x38
+#define AB8540_GPADC_OTP4_REG_6	0x39
+#define AB8540_GPADC_OTP4_REG_5	0x3A
+
+#define AB8540_GPADC_DIS_ZERO	0x00
+#define AB8540_GPADC_EN_VBIAS_XTAL_TEMP	0x02
+
+/* GPADC constants from AB8500 spec, UM0836 */
+#define AB8500_ADC_RESOLUTION		1024
+#define AB8500_ADC_CH_BTEMP_MIN		0
+#define AB8500_ADC_CH_BTEMP_MAX		1350
+#define AB8500_ADC_CH_DIETEMP_MIN	0
+#define AB8500_ADC_CH_DIETEMP_MAX	1350
+#define AB8500_ADC_CH_CHG_V_MIN		0
+#define AB8500_ADC_CH_CHG_V_MAX		20030
+#define AB8500_ADC_CH_ACCDET2_MIN	0
+#define AB8500_ADC_CH_ACCDET2_MAX	2500
+#define AB8500_ADC_CH_VBAT_MIN		2300
+#define AB8500_ADC_CH_VBAT_MAX		4800
+#define AB8500_ADC_CH_CHG_I_MIN		0
+#define AB8500_ADC_CH_CHG_I_MAX		1500
+#define AB8500_ADC_CH_BKBAT_MIN		0
+#define AB8500_ADC_CH_BKBAT_MAX		3200
+
+/* GPADC constants from AB8540 spec */
+#define AB8500_ADC_CH_IBAT_MIN		(-6000) /* mA range measured by ADC for ibat */
+#define AB8500_ADC_CH_IBAT_MAX		6000
+#define AB8500_ADC_CH_IBAT_MIN_V	(-60)	/* mV range measured by ADC for ibat */
+#define AB8500_ADC_CH_IBAT_MAX_V	60
+#define AB8500_GPADC_IBAT_VDROP_L	(-56)  /* mV */
+#define AB8500_GPADC_IBAT_VDROP_H	56
+
+/* This is used to not lose precision when dividing to get gain and offset */
+#define AB8500_GPADC_CALIB_SCALE	1000
+/*
+ * Number of bits shift used to not lose precision
+ * when dividing to get ibat gain.
+ */
+#define AB8500_GPADC_CALIB_SHIFT_IBAT	20
+
+/* Time in ms before disabling regulator */
+#define AB8500_GPADC_AUTOSUSPEND_DELAY	1
+
+#define AB8500_GPADC_CONVERSION_TIME	500 /* ms */
+
+enum ab8500_cal_channels {
+	AB8500_CAL_VMAIN = 0,
+	AB8500_CAL_BTEMP,
+	AB8500_CAL_VBAT,
+	AB8500_CAL_IBAT,
+	AB8500_CAL_NR,
+};
+
+/**
+ * struct ab8500_adc_cal_data - Table for storing gain and offset for the
+ * calibrated ADC channels
+ * @gain: Gain of the ADC channel
+ * @offset: Offset of the ADC channel
+ * @otp_calib_hi: Calibration from OTP
+ * @otp_calib_lo: Calibration from OTP
+ */
+struct ab8500_adc_cal_data {
+	s64 gain;
+	s64 offset;
+	u16 otp_calib_hi;
+	u16 otp_calib_lo;
+};
+
+/**
+ * struct ab8500_gpadc_chan_info - per-channel GPADC info
+ * @name: name of the channel
+ * @id: the internal AB8500 ID number for the channel
+ * @hardware_control: indicate that we want to use hardware ADC control
+ * on this channel, the default is software ADC control. Hardware control
+ * is normally only used to test the battery voltage during GSM bursts
+ * and needs a hardware trigger on the GPADCTrig pin of the ASIC.
+ * @falling_edge: indicate that we want to trigger on falling edge
+ * rather than rising edge, rising edge is the default
+ * @avg_sample: how many samples to average: must be 1, 4, 8 or 16.
+ * @trig_timer: how long to wait for the trigger, in 32kHz periods:
+ * 0 .. 255 periods
+ */
+struct ab8500_gpadc_chan_info {
+	const char *name;
+	u8 id;
+	bool hardware_control;
+	bool falling_edge;
+	u8 avg_sample;
+	u8 trig_timer;
+};
+
+/**
+ * struct ab8500_gpadc - AB8500 GPADC device information
+ * @dev: pointer to the containing device
+ * @ab8500: pointer to the parent AB8500 device
+ * @chans: internal per-channel information container
+ * @nchans: number of channels
+ * @complete: pointer to the completion that indicates
+ * the completion of an gpadc conversion cycle
+ * @vddadc: pointer to the regulator supplying VDDADC
+ * @irq_sw: interrupt number that is used by gpadc for software ADC conversion
+ * @irq_hw: interrupt number that is used by gpadc for hardware ADC conversion
+ * @cal_data: array of ADC calibration data structs
+ */
+struct ab8500_gpadc {
+	struct device *dev;
+	struct ab8500 *ab8500;
+	struct ab8500_gpadc_chan_info *chans;
+	unsigned int nchans;
+	struct completion complete;
+	struct regulator *vddadc;
+	int irq_sw;
+	int irq_hw;
+	struct ab8500_adc_cal_data cal_data[AB8500_CAL_NR];
+};
+
+static struct ab8500_gpadc_chan_info *
+ab8500_gpadc_get_channel(struct ab8500_gpadc *gpadc, u8 chan)
+{
+	struct ab8500_gpadc_chan_info *ch;
+	int i;
+
+	for (i = 0; i < gpadc->nchans; i++) {
+		ch = &gpadc->chans[i];
+		if (ch->id == chan)
+			break;
+	}
+	if (i == gpadc->nchans)
+		return NULL;
+
+	return ch;
+}
+
+/**
+ * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
+ * @gpadc: GPADC instance
+ * @ch: the sampled channel this raw value is coming from
+ * @ad_value: the raw value
+ */
+static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
+				      enum ab8500_gpadc_channel ch,
+				      int ad_value)
+{
+	int res;
+
+	switch (ch) {
+	case AB8500_GPADC_CHAN_MAIN_CHARGER:
+		/* No calibration data available: just interpolate */
+		if (!gpadc->cal_data[AB8500_CAL_VMAIN].gain) {
+			res = AB8500_ADC_CH_CHG_V_MIN + (AB8500_ADC_CH_CHG_V_MAX -
+				AB8500_ADC_CH_CHG_V_MIN) * ad_value /
+				AB8500_ADC_RESOLUTION;
+			break;
+		}
+		/* Here we can use calibration */
+		res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_VMAIN].gain +
+			gpadc->cal_data[AB8500_CAL_VMAIN].offset) / AB8500_GPADC_CALIB_SCALE;
+		break;
+
+	case AB8500_GPADC_CHAN_BAT_CTRL:
+	case AB8500_GPADC_CHAN_BAT_TEMP:
+	case AB8500_GPADC_CHAN_ACC_DET_1:
+	case AB8500_GPADC_CHAN_ADC_AUX_1:
+	case AB8500_GPADC_CHAN_ADC_AUX_2:
+	case AB8500_GPADC_CHAN_XTAL_TEMP:
+		/* No calibration data available: just interpolate */
+		if (!gpadc->cal_data[AB8500_CAL_BTEMP].gain) {
+			res = AB8500_ADC_CH_BTEMP_MIN + (AB8500_ADC_CH_BTEMP_MAX -
+				AB8500_ADC_CH_BTEMP_MIN) * ad_value /
+				AB8500_ADC_RESOLUTION;
+			break;
+		}
+		/* Here we can use calibration */
+		res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_BTEMP].gain +
+			gpadc->cal_data[AB8500_CAL_BTEMP].offset) / AB8500_GPADC_CALIB_SCALE;
+		break;
+
+	case AB8500_GPADC_CHAN_VBAT_A:
+	case AB8500_GPADC_CHAN_VBAT_TRUE_MEAS:
+		/* No calibration data available: just interpolate */
+		if (!gpadc->cal_data[AB8500_CAL_VBAT].gain) {
+			res = AB8500_ADC_CH_VBAT_MIN + (AB8500_ADC_CH_VBAT_MAX -
+				AB8500_ADC_CH_VBAT_MIN) * ad_value /
+				AB8500_ADC_RESOLUTION;
+			break;
+		}
+		/* Here we can use calibration */
+		res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_VBAT].gain +
+			gpadc->cal_data[AB8500_CAL_VBAT].offset) / AB8500_GPADC_CALIB_SCALE;
+		break;
+
+	case AB8505_GPADC_CHAN_DIE_TEMP:
+		res = AB8500_ADC_CH_DIETEMP_MIN +
+			(AB8500_ADC_CH_DIETEMP_MAX - AB8500_ADC_CH_DIETEMP_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_ACC_DET_2:
+		res = AB8500_ADC_CH_ACCDET2_MIN +
+			(AB8500_ADC_CH_ACCDET2_MAX - AB8500_ADC_CH_ACCDET2_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_VBUS:
+		res = AB8500_ADC_CH_CHG_V_MIN +
+			(AB8500_ADC_CH_CHG_V_MAX - AB8500_ADC_CH_CHG_V_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT:
+	case AB8500_GPADC_CHAN_USB_CHARGER_CURRENT:
+		res = AB8500_ADC_CH_CHG_I_MIN +
+			(AB8500_ADC_CH_CHG_I_MAX - AB8500_ADC_CH_CHG_I_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_BACKUP_BAT:
+		res = AB8500_ADC_CH_BKBAT_MIN +
+			(AB8500_ADC_CH_BKBAT_MAX - AB8500_ADC_CH_BKBAT_MIN) * ad_value /
+			AB8500_ADC_RESOLUTION;
+		break;
+
+	case AB8500_GPADC_CHAN_IBAT_VIRTUAL:
+		/* No calibration data available: just interpolate */
+		if (!gpadc->cal_data[AB8500_CAL_IBAT].gain) {
+			res = AB8500_ADC_CH_IBAT_MIN + (AB8500_ADC_CH_IBAT_MAX -
+				AB8500_ADC_CH_IBAT_MIN) * ad_value /
+				AB8500_ADC_RESOLUTION;
+			break;
+		}
+		/* Here we can use calibration */
+		res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_IBAT].gain +
+				gpadc->cal_data[AB8500_CAL_IBAT].offset)
+				>> AB8500_GPADC_CALIB_SHIFT_IBAT;
+		break;
+
+	default:
+		dev_err(gpadc->dev,
+			"unknown channel ID: %d, not possible to convert\n",
+			ch);
+		res = -EINVAL;
+		break;
+
+	}
+
+	return res;
+}
+
+static int ab8500_gpadc_read(struct ab8500_gpadc *gpadc,
+			     const struct ab8500_gpadc_chan_info *ch,
+			     int *ibat)
+{
+	int ret;
+	int looplimit = 0;
+	unsigned long completion_timeout;
+	u8 val;
+	u8 low_data, high_data, low_data2, high_data2;
+	u8 ctrl1;
+	u8 ctrl23;
+	unsigned int delay_min = 0;
+	unsigned int delay_max = 0;
+	u8 data_low_addr, data_high_addr;
+
+	if (!gpadc)
+		return -ENODEV;
+
+	/* check if conversion is supported */
+	if ((gpadc->irq_sw <= 0) && !ch->hardware_control)
+		return -ENOTSUPP;
+	if ((gpadc->irq_hw <= 0) && ch->hardware_control)
+		return -ENOTSUPP;
+
+	/* Enable vddadc by grabbing PM runtime */
+	pm_runtime_get_sync(gpadc->dev);
+
+	/* Check if ADC is not busy, lock and proceed */
+	do {
+		ret = abx500_get_register_interruptible(gpadc->dev,
+			AB8500_GPADC, AB8500_GPADC_STAT_REG, &val);
+		if (ret < 0)
+			goto out;
+		if (!(val & AB8500_GPADC_STAT_BUSY))
+			break;
+		msleep(20);
+	} while (++looplimit < 10);
+	if (looplimit >= 10 && (val & AB8500_GPADC_STAT_BUSY)) {
+		dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Enable GPADC */
+	ctrl1 = AB8500_GPADC_CTRL1_ENABLE;
+
+	/* Select the channel source and set average samples */
+	switch (ch->avg_sample) {
+	case 1:
+		ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_1;
+		break;
+	case 4:
+		ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_4;
+		break;
+	case 8:
+		ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_8;
+		break;
+	default:
+		ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_16;
+		break;
+	}
+
+	if (ch->hardware_control) {
+		ret = abx500_set_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8500_GPADC_CTRL3_REG, ctrl23);
+		ctrl1 |= AB8500_GPADC_CTRL1_TRIG_ENA;
+		if (ch->falling_edge)
+			ctrl1 |= AB8500_GPADC_CTRL1_TRIG_EDGE;
+	} else {
+		ret = abx500_set_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8500_GPADC_CTRL2_REG, ctrl23);
+	}
+	if (ret < 0) {
+		dev_err(gpadc->dev,
+			"gpadc_conversion: set avg samples failed\n");
+		goto out;
+	}
+
+	/*
+	 * Enable ADC, buffering, select rising edge and enable ADC path
+	 * charging current sense if it needed, ABB 3.0 needs some special
+	 * treatment too.
+	 */
+	switch (ch->id) {
+	case AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT:
+	case AB8500_GPADC_CHAN_USB_CHARGER_CURRENT:
+		ctrl1 |= AB8500_GPADC_CTRL1_BUF_ENA |
+			AB8500_GPADC_CTRL1_ICHAR_ENA;
+		break;
+	case AB8500_GPADC_CHAN_BAT_TEMP:
+		if (!is_ab8500_2p0_or_earlier(gpadc->ab8500)) {
+			ctrl1 |= AB8500_GPADC_CTRL1_BUF_ENA |
+				AB8500_GPADC_CTRL1_BTEMP_PULL_UP;
+			/*
+			 * Delay might be needed for ABB8500 cut 3.0, if not,
+			 * remove when hardware will be available
+			 */
+			delay_min = 1000; /* Delay in micro seconds */
+			delay_max = 10000; /* large range optimises sleepmode */
+			break;
+		}
+		/* Fall through */
+	default:
+		ctrl1 |= AB8500_GPADC_CTRL1_BUF_ENA;
+		break;
+	}
+
+	/* Write configuration to control register 1 */
+	ret = abx500_set_register_interruptible(gpadc->dev,
+		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ctrl1);
+	if (ret < 0) {
+		dev_err(gpadc->dev,
+			"gpadc_conversion: set Control register failed\n");
+		goto out;
+	}
+
+	if (delay_min != 0)
+		usleep_range(delay_min, delay_max);
+
+	if (ch->hardware_control) {
+		/* Set trigger delay timer */
+		ret = abx500_set_register_interruptible(gpadc->dev,
+			AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG,
+			ch->trig_timer);
+		if (ret < 0) {
+			dev_err(gpadc->dev,
+				"gpadc_conversion: trig timer failed\n");
+			goto out;
+		}
+		completion_timeout = 2 * HZ;
+		data_low_addr = AB8500_GPADC_AUTODATAL_REG;
+		data_high_addr = AB8500_GPADC_AUTODATAH_REG;
+	} else {
+		/* Start SW conversion */
+		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
+			AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+			AB8500_GPADC_CTRL1_START_SW_CONV,
+			AB8500_GPADC_CTRL1_START_SW_CONV);
+		if (ret < 0) {
+			dev_err(gpadc->dev,
+				"gpadc_conversion: start s/w conv failed\n");
+			goto out;
+		}
+		completion_timeout = msecs_to_jiffies(AB8500_GPADC_CONVERSION_TIME);
+		data_low_addr = AB8500_GPADC_MANDATAL_REG;
+		data_high_addr = AB8500_GPADC_MANDATAH_REG;
+	}
+
+	/* Wait for completion of conversion */
+	if (!wait_for_completion_timeout(&gpadc->complete,
+			completion_timeout)) {
+		dev_err(gpadc->dev,
+			"timeout didn't receive GPADC conv interrupt\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Read the converted RAW data */
+	ret = abx500_get_register_interruptible(gpadc->dev,
+			AB8500_GPADC, data_low_addr, &low_data);
+	if (ret < 0) {
+		dev_err(gpadc->dev,
+			"gpadc_conversion: read low data failed\n");
+		goto out;
+	}
+
+	ret = abx500_get_register_interruptible(gpadc->dev,
+		AB8500_GPADC, data_high_addr, &high_data);
+	if (ret < 0) {
+		dev_err(gpadc->dev,
+			"gpadc_conversion: read high data failed\n");
+		goto out;
+	}
+
+	/* Check if double conversion is required */
+	if ((ch->id == AB8500_GPADC_CHAN_BAT_CTRL_AND_IBAT) ||
+	    (ch->id == AB8500_GPADC_CHAN_VBAT_MEAS_AND_IBAT) ||
+	    (ch->id == AB8500_GPADC_CHAN_VBAT_TRUE_MEAS_AND_IBAT) ||
+	    (ch->id == AB8500_GPADC_CHAN_BAT_TEMP_AND_IBAT)) {
+
+		if (ch->hardware_control) {
+			/* not supported */
+			ret = -ENOTSUPP;
+			dev_err(gpadc->dev,
+				"gpadc_conversion: only SW double conversion supported\n");
+			goto out;
+		} else {
+			/* Read the converted RAW data 2 */
+			ret = abx500_get_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
+				&low_data2);
+			if (ret < 0) {
+				dev_err(gpadc->dev,
+					"gpadc_conversion: read sw low data 2 failed\n");
+				goto out;
+			}
+
+			ret = abx500_get_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
+				&high_data2);
+			if (ret < 0) {
+				dev_err(gpadc->dev,
+					"gpadc_conversion: read sw high data 2 failed\n");
+				goto out;
+			}
+			if (ibat != NULL) {
+				*ibat = (high_data2 << 8) | low_data2;
+			} else {
+				dev_warn(gpadc->dev,
+					"gpadc_conversion: ibat not stored\n");
+			}
+
+		}
+	}
+
+	/* Disable GPADC */
+	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
+		AB8500_GPADC_CTRL1_REG, AB8500_GPADC_CTRL1_DISABLE);
+	if (ret < 0) {
+		dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
+		goto out;
+	}
+
+	/* This eventually drops the regulator */
+	pm_runtime_mark_last_busy(gpadc->dev);
+	pm_runtime_put_autosuspend(gpadc->dev);
+
+	return (high_data << 8) | low_data;
+
+out:
+	/*
+	 * It has shown to be needed to turn off the GPADC if an error occurs,
+	 * otherwise we might have problem when waiting for the busy bit in the
+	 * GPADC status register to go low. In V1.1 there wait_for_completion
+	 * seems to timeout when waiting for an interrupt.. Not seen in V2.0
+	 */
+	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
+		AB8500_GPADC_CTRL1_REG, AB8500_GPADC_CTRL1_DISABLE);
+	pm_runtime_put(gpadc->dev);
+	dev_err(gpadc->dev,
+		"gpadc_conversion: Failed to AD convert channel %d\n", ch->id);
+
+	return ret;
+}
+
+/**
+ * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
+ * @irq: irq number
+ * @data: pointer to the data passed during request irq
+ *
+ * This is a interrupt service routine for gpadc conversion completion.
+ * Notifies the gpadc completion is completed and the converted raw value
+ * can be read from the registers.
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *data)
+{
+	struct ab8500_gpadc *gpadc = data;
+
+	complete(&gpadc->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int otp_cal_regs[] = {
+	AB8500_GPADC_CAL_1,
+	AB8500_GPADC_CAL_2,
+	AB8500_GPADC_CAL_3,
+	AB8500_GPADC_CAL_4,
+	AB8500_GPADC_CAL_5,
+	AB8500_GPADC_CAL_6,
+	AB8500_GPADC_CAL_7,
+};
+
+static int otp4_cal_regs[] = {
+	AB8540_GPADC_OTP4_REG_7,
+	AB8540_GPADC_OTP4_REG_6,
+	AB8540_GPADC_OTP4_REG_5,
+};
+
+static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
+{
+	int i;
+	int ret[ARRAY_SIZE(otp_cal_regs)];
+	u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
+	int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
+	u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
+	int vmain_high, vmain_low;
+	int btemp_high, btemp_low;
+	int vbat_high, vbat_low;
+	int ibat_high, ibat_low;
+	s64 V_gain, V_offset, V2A_gain, V2A_offset;
+
+	/* First we read all OTP registers and store the error code */
+	for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
+		ret[i] = abx500_get_register_interruptible(gpadc->dev,
+			AB8500_OTP_EMUL, otp_cal_regs[i],  &gpadc_cal[i]);
+		if (ret[i] < 0) {
+			/* Continue anyway: maybe the other registers are OK */
+			dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n",
+				__func__, otp_cal_regs[i]);
+		} else {
+			/* Put this in the entropy pool as device-unique */
+			add_device_randomness(&ret[i], sizeof(ret[i]));
+		}
+	}
+
+	/*
+	 * The ADC calibration data is stored in OTP registers.
+	 * The layout of the calibration data is outlined below and a more
+	 * detailed description can be found in UM0836
+	 *
+	 * vm_h/l = vmain_high/low
+	 * bt_h/l = btemp_high/low
+	 * vb_h/l = vbat_high/low
+	 *
+	 * Data bits 8500/9540:
+	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |						   | vm_h9 | vm_h8
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |		   | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 *
+	 * Data bits 8540:
+	 * OTP2
+	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 *
+	 * Data bits 8540:
+	 * OTP4
+	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |					   | ib_h9 | ib_h8 | ib_h7
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
+	 *
+	 *
+	 * Ideal output ADC codes corresponding to injected input voltages
+	 * during manufacturing is:
+	 *
+	 * vmain_high: Vin = 19500mV / ADC ideal code = 997
+	 * vmain_low:  Vin = 315mV   / ADC ideal code = 16
+	 * btemp_high: Vin = 1300mV  / ADC ideal code = 985
+	 * btemp_low:  Vin = 21mV    / ADC ideal code = 16
+	 * vbat_high:  Vin = 4700mV  / ADC ideal code = 982
+	 * vbat_low:   Vin = 2380mV  / ADC ideal code = 33
+	 */
+
+	if (is_ab8540(gpadc->ab8500)) {
+		/* Calculate gain and offset for VMAIN if all reads succeeded*/
+		if (!(ret[1] < 0 || ret[2] < 0)) {
+			vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
+				((gpadc_cal[2] & 0xC0) >> 6));
+			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_hi =
+				(u16)vmain_high;
+			gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_lo =
+				(u16)vmain_low;
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].gain = AB8500_GPADC_CALIB_SCALE *
+				(19500 - 315) / (vmain_high - vmain_low);
+			gpadc->cal_data[AB8500_CAL_VMAIN].offset = AB8500_GPADC_CALIB_SCALE *
+				19500 - (AB8500_GPADC_CALIB_SCALE * (19500 - 315) /
+				(vmain_high - vmain_low)) * vmain_high;
+		} else {
+			gpadc->cal_data[AB8500_CAL_VMAIN].gain = 0;
+		}
+
+		/* Read IBAT calibration Data */
+		for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
+			ret_otp4[i] = abx500_get_register_interruptible(
+					gpadc->dev, AB8500_OTP_EMUL,
+					otp4_cal_regs[i],  &gpadc_otp4[i]);
+			if (ret_otp4[i] < 0)
+				dev_err(gpadc->dev,
+					"%s: read otp4 reg 0x%02x failed\n",
+					__func__, otp4_cal_regs[i]);
+		}
+
+		/* Calculate gain and offset for IBAT if all reads succeeded */
+		if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
+			ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
+				((gpadc_otp4[1] & 0xFE) >> 1));
+			ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
+				((gpadc_otp4[2] & 0xF8) >> 3));
+
+			gpadc->cal_data[AB8500_CAL_IBAT].otp_calib_hi =
+				(u16)ibat_high;
+			gpadc->cal_data[AB8500_CAL_IBAT].otp_calib_lo =
+				(u16)ibat_low;
+
+			V_gain = ((AB8500_GPADC_IBAT_VDROP_H - AB8500_GPADC_IBAT_VDROP_L)
+				<< AB8500_GPADC_CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
+
+			V_offset = (AB8500_GPADC_IBAT_VDROP_H << AB8500_GPADC_CALIB_SHIFT_IBAT) -
+				(((AB8500_GPADC_IBAT_VDROP_H - AB8500_GPADC_IBAT_VDROP_L) <<
+				AB8500_GPADC_CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
+				* ibat_high;
+			/*
+			 * Result obtained is in mV (at a scale factor),
+			 * we need to calculate gain and offset to get mA
+			 */
+			V2A_gain = (AB8500_ADC_CH_IBAT_MAX - AB8500_ADC_CH_IBAT_MIN)/
+				(AB8500_ADC_CH_IBAT_MAX_V - AB8500_ADC_CH_IBAT_MIN_V);
+			V2A_offset = ((AB8500_ADC_CH_IBAT_MAX_V * AB8500_ADC_CH_IBAT_MIN -
+				AB8500_ADC_CH_IBAT_MAX * AB8500_ADC_CH_IBAT_MIN_V)
+				<< AB8500_GPADC_CALIB_SHIFT_IBAT)
+				/ (AB8500_ADC_CH_IBAT_MAX_V - AB8500_ADC_CH_IBAT_MIN_V);
+
+			gpadc->cal_data[AB8500_CAL_IBAT].gain =
+				V_gain * V2A_gain;
+			gpadc->cal_data[AB8500_CAL_IBAT].offset =
+				V_offset * V2A_gain + V2A_offset;
+		} else {
+			gpadc->cal_data[AB8500_CAL_IBAT].gain = 0;
+		}
+	} else {
+		/* Calculate gain and offset for VMAIN if all reads succeeded */
+		if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
+			vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
+				((gpadc_cal[1] & 0x3F) << 2) |
+				((gpadc_cal[2] & 0xC0) >> 6));
+			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_hi =
+				(u16)vmain_high;
+			gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_lo =
+				(u16)vmain_low;
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].gain = AB8500_GPADC_CALIB_SCALE *
+				(19500 - 315) / (vmain_high - vmain_low);
+
+			gpadc->cal_data[AB8500_CAL_VMAIN].offset = AB8500_GPADC_CALIB_SCALE *
+				19500 - (AB8500_GPADC_CALIB_SCALE * (19500 - 315) /
+				(vmain_high - vmain_low)) * vmain_high;
+		} else {
+			gpadc->cal_data[AB8500_CAL_VMAIN].gain = 0;
+		}
+	}
+
+	/* Calculate gain and offset for BTEMP if all reads succeeded */
+	if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
+		btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
+			(gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
+		btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
+
+		gpadc->cal_data[AB8500_CAL_BTEMP].otp_calib_hi = (u16)btemp_high;
+		gpadc->cal_data[AB8500_CAL_BTEMP].otp_calib_lo = (u16)btemp_low;
+
+		gpadc->cal_data[AB8500_CAL_BTEMP].gain =
+			AB8500_GPADC_CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
+		gpadc->cal_data[AB8500_CAL_BTEMP].offset = AB8500_GPADC_CALIB_SCALE * 1300 -
+			(AB8500_GPADC_CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
+			* btemp_high;
+	} else {
+		gpadc->cal_data[AB8500_CAL_BTEMP].gain = 0;
+	}
+
+	/* Calculate gain and offset for VBAT if all reads succeeded */
+	if (!(ret[4] < 0 || ret[5] < 0 || ret[6] < 0)) {
+		vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
+		vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
+
+		gpadc->cal_data[AB8500_CAL_VBAT].otp_calib_hi = (u16)vbat_high;
+		gpadc->cal_data[AB8500_CAL_VBAT].otp_calib_lo = (u16)vbat_low;
+
+		gpadc->cal_data[AB8500_CAL_VBAT].gain = AB8500_GPADC_CALIB_SCALE *
+			(4700 - 2380) /	(vbat_high - vbat_low);
+		gpadc->cal_data[AB8500_CAL_VBAT].offset = AB8500_GPADC_CALIB_SCALE * 4700 -
+			(AB8500_GPADC_CALIB_SCALE * (4700 - 2380) /
+			(vbat_high - vbat_low)) * vbat_high;
+	} else {
+		gpadc->cal_data[AB8500_CAL_VBAT].gain = 0;
+	}
+}
+
+static int ab8500_gpadc_read_raw(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int *val, int *val2, long mask)
+{
+	struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+	const struct ab8500_gpadc_chan_info *ch;
+	int raw_val;
+	int processed;
+
+	ch = ab8500_gpadc_get_channel(gpadc, chan->address);
+	if (!ch) {
+		dev_err(gpadc->dev, "no such channel %lu\n",
+			chan->address);
+		return -EINVAL;
+	}
+
+	raw_val = ab8500_gpadc_read(gpadc, ch, NULL);
+	if (raw_val < 0)
+		return raw_val;
+
+	if (mask == IIO_CHAN_INFO_RAW) {
+		*val = raw_val;
+		return IIO_VAL_INT;
+	}
+
+	if (mask == IIO_CHAN_INFO_PROCESSED) {
+		processed = ab8500_gpadc_ad_to_voltage(gpadc, ch->id, raw_val);
+		if (processed < 0)
+			return processed;
+
+		/* Return millivolt or milliamps or millicentigrades */
+		*val = processed * 1000;
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev,
+				 const struct of_phandle_args *iiospec)
+{
+	int i;
+
+	for (i = 0; i < indio_dev->num_channels; i++)
+		if (indio_dev->channels[i].channel == iiospec->args[0])
+			return i;
+
+	return -EINVAL;
+}
+
+static const struct iio_info ab8500_gpadc_info = {
+	.of_xlate = ab8500_gpadc_of_xlate,
+	.read_raw = ab8500_gpadc_read_raw,
+};
+
+#ifdef CONFIG_PM
+static int ab8500_gpadc_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+
+	regulator_disable(gpadc->vddadc);
+
+	return 0;
+}
+
+static int ab8500_gpadc_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+	int ret;
+
+	ret = regulator_enable(gpadc->vddadc);
+	if (ret)
+		dev_err(dev, "Failed to enable vddadc: %d\n", ret);
+
+	return ret;
+}
+#endif
+
+/**
+ * ab8500_gpadc_parse_channel() - process devicetree channel configuration
+ * @dev: pointer to containing device
+ * @np: device tree node for the channel to configure
+ * @ch: channel info to fill in
+ * @iio_chan: IIO channel specification to fill in
+ *
+ * The devicetree will set up the channel for use with the specific device,
+ * and define usage for things like AUX GPADC inputs more precisely.
+ */
+static int ab8500_gpadc_parse_channel(struct device *dev,
+				      struct device_node *np,
+				      struct ab8500_gpadc_chan_info *ch,
+				      struct iio_chan_spec *iio_chan)
+{
+	const char *name = np->name;
+	u32 chan;
+	int ret;
+
+	ret = of_property_read_u32(np, "reg", &chan);
+	if (ret) {
+		dev_err(dev, "invalid channel number %s\n", name);
+		return ret;
+	}
+	if (chan > AB8500_GPADC_CHAN_BAT_TEMP_AND_IBAT) {
+		dev_err(dev, "%s channel number out of range %d\n", name, chan);
+		return -EINVAL;
+	}
+
+	iio_chan->channel = chan;
+	iio_chan->datasheet_name = name;
+	iio_chan->indexed = 1;
+	iio_chan->address = chan;
+	iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_PROCESSED);
+	/* Most are voltages (also temperatures), some are currents */
+	if ((chan == AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT) ||
+	    (chan == AB8500_GPADC_CHAN_USB_CHARGER_CURRENT))
+		iio_chan->type = IIO_CURRENT;
+	else
+		iio_chan->type = IIO_VOLTAGE;
+
+	ch->id = chan;
+
+	/* Sensible defaults */
+	ch->avg_sample = 16;
+	ch->hardware_control = false;
+	ch->falling_edge = false;
+	ch->trig_timer = 0;
+
+	return 0;
+}
+
+/**
+ * ab8500_gpadc_parse_channels() - Parse the GPADC channels from DT
+ * @gpadc: the GPADC to configure the channels for
+ * @np: device tree node containing the channel configurations
+ * @chans: the IIO channels we parsed
+ * @nchans: the number of IIO channels we parsed
+ */
+static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
+				       struct device_node *np,
+				       struct iio_chan_spec **chans_parsed,
+				       unsigned int *nchans_parsed)
+{
+	struct device_node *child;
+	struct ab8500_gpadc_chan_info *ch;
+	struct iio_chan_spec *iio_chans;
+	unsigned int nchans;
+	int i;
+
+	nchans = of_get_available_child_count(np);
+	if (!nchans) {
+		dev_err(gpadc->dev, "no channel children\n");
+		return -ENODEV;
+	}
+	dev_info(gpadc->dev, "found %d ADC channels\n", nchans);
+
+	iio_chans = devm_kcalloc(gpadc->dev, nchans,
+				 sizeof(*iio_chans), GFP_KERNEL);
+	if (!iio_chans)
+		return -ENOMEM;
+
+	gpadc->chans = devm_kcalloc(gpadc->dev, nchans,
+				    sizeof(*gpadc->chans), GFP_KERNEL);
+	if (!gpadc->chans)
+		return -ENOMEM;
+
+	i = 0;
+	for_each_available_child_of_node(np, child) {
+		struct iio_chan_spec *iio_chan;
+		int ret;
+
+		ch = &gpadc->chans[i];
+		iio_chan = &iio_chans[i];
+
+		ret = ab8500_gpadc_parse_channel(gpadc->dev, child, ch,
+						 iio_chan);
+		if (ret) {
+			of_node_put(child);
+			return ret;
+		}
+		i++;
+	}
+	gpadc->nchans = nchans;
+	*chans_parsed = iio_chans;
+	*nchans_parsed = nchans;
+
+	return 0;
+}
+
+static int ab8500_gpadc_probe(struct platform_device *pdev)
+{
+	struct ab8500_gpadc *gpadc;
+	struct iio_dev *indio_dev;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct iio_chan_spec *iio_chans;
+	unsigned int n_iio_chans;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*gpadc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, indio_dev);
+	gpadc = iio_priv(indio_dev);
+
+	gpadc->dev = dev;
+	gpadc->ab8500 = dev_get_drvdata(dev->parent);
+
+	ret = ab8500_gpadc_parse_channels(gpadc, np, &iio_chans, &n_iio_chans);
+	if (ret)
+		return ret;
+
+	gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
+	if (gpadc->irq_sw < 0) {
+		dev_err(dev, "failed to get platform sw_conv_end irq\n");
+		return gpadc->irq_sw;
+	}
+
+	gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
+	if (gpadc->irq_hw < 0) {
+		dev_err(dev, "failed to get platform hw_conv_end irq\n");
+		return gpadc->irq_hw;
+	}
+
+	/* Initialize completion used to notify completion of conversion */
+	init_completion(&gpadc->complete);
+
+	/* Request interrupts */
+	ret = devm_request_threaded_irq(dev, gpadc->irq_sw, NULL,
+		ab8500_bm_gpadcconvend_handler,	IRQF_NO_SUSPEND | IRQF_ONESHOT,
+		"ab8500-gpadc-sw", gpadc);
+	if (ret < 0) {
+		dev_err(dev,
+			"failed to request sw conversion irq %d\n",
+			gpadc->irq_sw);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(dev, gpadc->irq_hw, NULL,
+		ab8500_bm_gpadcconvend_handler,	IRQF_NO_SUSPEND | IRQF_ONESHOT,
+		"ab8500-gpadc-hw", gpadc);
+	if (ret < 0) {
+		dev_err(dev,
+			"Failed to request hw conversion irq: %d\n",
+			gpadc->irq_hw);
+		return ret;
+	}
+
+	/* The VTVout LDO used to power the AB8500 GPADC */
+	gpadc->vddadc = devm_regulator_get(dev, "vddadc");
+	if (IS_ERR(gpadc->vddadc)) {
+		ret = PTR_ERR(gpadc->vddadc);
+		dev_err(dev, "failed to get vddadc\n");
+		return ret;
+	}
+
+	ret = regulator_enable(gpadc->vddadc);
+	if (ret) {
+		dev_err(dev, "failed to enable vddadc: %d\n", ret);
+		return ret;
+	}
+
+	/* Enable runtime PM */
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev, AB8500_GPADC_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(dev);
+
+	ab8500_gpadc_read_calibration_data(gpadc);
+
+	pm_runtime_put(dev);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->dev.of_node = np;
+	indio_dev->name = "ab8500-gpadc";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ab8500_gpadc_info;
+	indio_dev->channels = iio_chans;
+	indio_dev->num_channels = n_iio_chans;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		goto out_dis_pm;
+
+	return 0;
+
+out_dis_pm:
+	pm_runtime_get_sync(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+	regulator_disable(gpadc->vddadc);
+
+	return ret;
+}
+
+static int ab8500_gpadc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+
+	pm_runtime_get_sync(gpadc->dev);
+	pm_runtime_put_noidle(gpadc->dev);
+	pm_runtime_disable(gpadc->dev);
+	regulator_disable(gpadc->vddadc);
+
+	return 0;
+}
+
+static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
+			   ab8500_gpadc_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver ab8500_gpadc_driver = {
+	.probe = ab8500_gpadc_probe,
+	.remove = ab8500_gpadc_remove,
+	.driver = {
+		.name = "ab8500-gpadc",
+		.pm = &ab8500_gpadc_pm_ops,
+	},
+};
+builtin_platform_driver(ab8500_gpadc_driver);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ae24d3ea68ea..420900852166 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1210,13 +1210,6 @@ config AB8500_DEBUG
 	  Select this option if you want debug information using the debug
 	  filesystem, debugfs.
 
-config AB8500_GPADC
-	bool "ST-Ericsson AB8500 GPADC driver"
-	depends on AB8500_CORE && REGULATOR_AB8500
-	default y
-	help
-	  AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
-
 config MFD_DB8500_PRCMU
 	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 	depends on UX500_SOC_DB8500
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c1067ea46204..aed99f08739f 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -177,7 +177,6 @@ obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
-obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
 obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
 # ab8500-core need to come after db8500-prcmu (which provides the channel)
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index f4e26b6e5362..1a9a3414d4fa 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -84,7 +84,6 @@
 
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
 
 #ifdef CONFIG_DEBUG_FS
 #include <linux/string.h>
@@ -103,11 +102,6 @@ static int num_irqs;
 static struct device_attribute **dev_attr;
 static char **event_name;
 
-static u8 avg_sample = SAMPLE_16;
-static u8 trig_edge = RISING_EDGE;
-static u8 conv_type = ADC_SW;
-static u8 trig_timer;
-
 /**
  * struct ab8500_reg_range
  * @first: the first address of the range
@@ -152,7 +146,6 @@ static struct hwreg_cfg hwreg_cfg = {
 };
 
 #define AB8500_NAME_STRING "ab8500"
-#define AB8500_ADC_NAME_STRING "gpadc"
 #define AB8500_NUM_BANKS AB8500_DEBUG_FIELD_LAST
 
 #define AB8500_REV_REG 0x80
@@ -1646,633 +1639,6 @@ report_write_failure:
 
 DEFINE_SHOW_ATTRIBUTE(ab8500_modem);
 
-static int ab8500_gpadc_bat_ctrl_show(struct seq_file *s, void *p)
-{
-	int bat_ctrl_raw;
-	int bat_ctrl_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		BAT_CTRL, bat_ctrl_raw);
-
-	seq_printf(s, "%d,0x%X\n", bat_ctrl_convert, bat_ctrl_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_bat_ctrl);
-
-static int ab8500_gpadc_btemp_ball_show(struct seq_file *s, void *p)
-{
-	int btemp_ball_raw;
-	int btemp_ball_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
-		btemp_ball_raw);
-
-	seq_printf(s, "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_btemp_ball);
-
-static int ab8500_gpadc_main_charger_v_show(struct seq_file *s, void *p)
-{
-	int main_charger_v_raw;
-	int main_charger_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		MAIN_CHARGER_V, main_charger_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", main_charger_v_convert, main_charger_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_main_charger_v);
-
-static int ab8500_gpadc_acc_detect1_show(struct seq_file *s, void *p)
-{
-	int acc_detect1_raw;
-	int acc_detect1_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1,
-		acc_detect1_raw);
-
-	seq_printf(s, "%d,0x%X\n", acc_detect1_convert, acc_detect1_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_acc_detect1);
-
-static int ab8500_gpadc_acc_detect2_show(struct seq_file *s, void *p)
-{
-	int acc_detect2_raw;
-	int acc_detect2_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		ACC_DETECT2, acc_detect2_raw);
-
-	seq_printf(s, "%d,0x%X\n", acc_detect2_convert, acc_detect2_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_acc_detect2);
-
-static int ab8500_gpadc_aux1_show(struct seq_file *s, void *p)
-{
-	int aux1_raw;
-	int aux1_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1,
-		aux1_raw);
-
-	seq_printf(s, "%d,0x%X\n", aux1_convert, aux1_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_aux1);
-
-static int ab8500_gpadc_aux2_show(struct seq_file *s, void *p)
-{
-	int aux2_raw;
-	int aux2_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2,
-		aux2_raw);
-
-	seq_printf(s, "%d,0x%X\n", aux2_convert, aux2_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_aux2);
-
-static int ab8500_gpadc_main_bat_v_show(struct seq_file *s, void *p)
-{
-	int main_bat_v_raw;
-	int main_bat_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
-		main_bat_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", main_bat_v_convert, main_bat_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_main_bat_v);
-
-static int ab8500_gpadc_vbus_v_show(struct seq_file *s, void *p)
-{
-	int vbus_v_raw;
-	int vbus_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbus_v_raw =  ab8500_gpadc_read_raw(gpadc, VBUS_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V,
-		vbus_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", vbus_v_convert, vbus_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_vbus_v);
-
-static int ab8500_gpadc_main_charger_c_show(struct seq_file *s, void *p)
-{
-	int main_charger_c_raw;
-	int main_charger_c_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		MAIN_CHARGER_C, main_charger_c_raw);
-
-	seq_printf(s, "%d,0x%X\n", main_charger_c_convert, main_charger_c_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_main_charger_c);
-
-static int ab8500_gpadc_usb_charger_c_show(struct seq_file *s, void *p)
-{
-	int usb_charger_c_raw;
-	int usb_charger_c_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		USB_CHARGER_C, usb_charger_c_raw);
-
-	seq_printf(s, "%d,0x%X\n", usb_charger_c_convert, usb_charger_c_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_usb_charger_c);
-
-static int ab8500_gpadc_bk_bat_v_show(struct seq_file *s, void *p)
-{
-	int bk_bat_v_raw;
-	int bk_bat_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		BK_BAT_V, bk_bat_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", bk_bat_v_convert, bk_bat_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_bk_bat_v);
-
-static int ab8500_gpadc_die_temp_show(struct seq_file *s, void *p)
-{
-	int die_temp_raw;
-	int die_temp_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP,
-		die_temp_raw);
-
-	seq_printf(s, "%d,0x%X\n", die_temp_convert, die_temp_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_die_temp);
-
-static int ab8500_gpadc_usb_id_show(struct seq_file *s, void *p)
-{
-	int usb_id_raw;
-	int usb_id_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	usb_id_raw = ab8500_gpadc_read_raw(gpadc, USB_ID,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	usb_id_convert = ab8500_gpadc_ad_to_voltage(gpadc, USB_ID,
-		usb_id_raw);
-
-	seq_printf(s, "%d,0x%X\n", usb_id_convert, usb_id_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_usb_id);
-
-static int ab8540_gpadc_xtal_temp_show(struct seq_file *s, void *p)
-{
-	int xtal_temp_raw;
-	int xtal_temp_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	xtal_temp_raw = ab8500_gpadc_read_raw(gpadc, XTAL_TEMP,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	xtal_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, XTAL_TEMP,
-		xtal_temp_raw);
-
-	seq_printf(s, "%d,0x%X\n", xtal_temp_convert, xtal_temp_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_xtal_temp);
-
-static int ab8540_gpadc_vbat_true_meas_show(struct seq_file *s, void *p)
-{
-	int vbat_true_meas_raw;
-	int vbat_true_meas_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbat_true_meas_raw = ab8500_gpadc_read_raw(gpadc, VBAT_TRUE_MEAS,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	vbat_true_meas_convert =
-		ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS,
-					   vbat_true_meas_raw);
-
-	seq_printf(s, "%d,0x%X\n", vbat_true_meas_convert, vbat_true_meas_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_vbat_true_meas);
-
-static int ab8540_gpadc_bat_ctrl_and_ibat_show(struct seq_file *s, void *p)
-{
-	int bat_ctrl_raw;
-	int bat_ctrl_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_ctrl_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_CTRL_AND_IBAT,
-		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
-
-	bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, BAT_CTRL,
-		bat_ctrl_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   bat_ctrl_convert, bat_ctrl_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_bat_ctrl_and_ibat);
-
-static int ab8540_gpadc_vbat_meas_and_ibat_show(struct seq_file *s, void *p)
-{
-	int vbat_meas_raw;
-	int vbat_meas_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbat_meas_raw = ab8500_gpadc_double_read_raw(gpadc, VBAT_MEAS_AND_IBAT,
-		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
-	vbat_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
-		vbat_meas_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   vbat_meas_convert, vbat_meas_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_vbat_meas_and_ibat);
-
-static int ab8540_gpadc_vbat_true_meas_and_ibat_show(struct seq_file *s, void *p)
-{
-	int vbat_true_meas_raw;
-	int vbat_true_meas_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbat_true_meas_raw = ab8500_gpadc_double_read_raw(gpadc,
-			VBAT_TRUE_MEAS_AND_IBAT, avg_sample, trig_edge,
-			trig_timer, conv_type, &ibat_raw);
-	vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-			VBAT_TRUE_MEAS, vbat_true_meas_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   vbat_true_meas_convert, vbat_true_meas_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_vbat_true_meas_and_ibat);
-
-static int ab8540_gpadc_bat_temp_and_ibat_show(struct seq_file *s, void *p)
-{
-	int bat_temp_raw;
-	int bat_temp_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_temp_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_TEMP_AND_IBAT,
-		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
-	bat_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
-		bat_temp_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   bat_temp_convert, bat_temp_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_bat_temp_and_ibat);
-
-static int ab8540_gpadc_otp_calib_show(struct seq_file *s, void *p)
-{
-	struct ab8500_gpadc *gpadc;
-	u16 vmain_l, vmain_h, btemp_l, btemp_h;
-	u16 vbat_l, vbat_h, ibat_l, ibat_h;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h,
-			&vbat_l, &vbat_h, &ibat_l, &ibat_h);
-	seq_printf(s,
-		   "VMAIN_L:0x%X\n"
-		   "VMAIN_H:0x%X\n"
-		   "BTEMP_L:0x%X\n"
-		   "BTEMP_H:0x%X\n"
-		   "VBAT_L:0x%X\n"
-		   "VBAT_H:0x%X\n"
-		   "IBAT_L:0x%X\n"
-		   "IBAT_H:0x%X\n",
-		   vmain_l, vmain_h, btemp_l, btemp_h,
-		   vbat_l, vbat_h, ibat_l, ibat_h);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_otp_calib);
-
-static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", avg_sample);
-
-	return 0;
-}
-
-static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_avg_sample_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_avg_sample_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_avg_sample;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_avg_sample);
-	if (err)
-		return err;
-
-	if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4)
-			|| (user_avg_sample == SAMPLE_8)
-			|| (user_avg_sample == SAMPLE_16)) {
-		avg_sample = (u8) user_avg_sample;
-	} else {
-		dev_err(dev,
-			"debugfs err input: should be egal to 1, 4, 8 or 16\n");
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_avg_sample_fops = {
-	.open = ab8500_gpadc_avg_sample_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_avg_sample_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", trig_edge);
-
-	return 0;
-}
-
-static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_trig_edge_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_trig_edge_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_trig_edge;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_trig_edge);
-	if (err)
-		return err;
-
-	if ((user_trig_edge == RISING_EDGE)
-			|| (user_trig_edge == FALLING_EDGE)) {
-		trig_edge = (u8) user_trig_edge;
-	} else {
-		dev_err(dev, "Wrong input:\n"
-			"Enter 0. Rising edge\n"
-			"Enter 1. Falling edge\n");
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_trig_edge_fops = {
-	.open = ab8500_gpadc_trig_edge_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_trig_edge_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", trig_timer);
-
-	return 0;
-}
-
-static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_trig_timer_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_trig_timer_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_trig_timer;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_trig_timer);
-	if (err)
-		return err;
-
-	if (user_trig_timer & ~0xFF) {
-		dev_err(dev,
-			"debugfs error input: should be between 0 to 255\n");
-		return -EINVAL;
-	}
-
-	trig_timer = (u8) user_trig_timer;
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_trig_timer_fops = {
-	.open = ab8500_gpadc_trig_timer_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_trig_timer_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", conv_type);
-
-	return 0;
-}
-
-static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_conv_type_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_conv_type_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_conv_type;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_conv_type);
-	if (err)
-		return err;
-
-	if ((user_conv_type == ADC_SW)
-			|| (user_conv_type == ADC_HW)) {
-		conv_type = (u8) user_conv_type;
-	} else {
-		dev_err(dev, "Wrong input:\n"
-			"Enter 0. ADC SW conversion\n"
-			"Enter 1. ADC HW conversion\n");
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_conv_type_fops = {
-	.open = ab8500_gpadc_conv_type_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_conv_type_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
 /*
  * return length of an ASCII numerical value, 0 is string is not a
  * numerical value.
@@ -2647,7 +2013,6 @@ static const struct file_operations ab8500_hwreg_fops = {
 static int ab8500_debug_probe(struct platform_device *plf)
 {
 	struct dentry *ab8500_dir;
-	struct dentry *ab8500_gpadc_dir;
 	struct ab8500 *ab8500;
 	struct resource *res;
 
@@ -2689,9 +2054,6 @@ static int ab8500_debug_probe(struct platform_device *plf)
 
 	ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL);
 
-	ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING,
-					      ab8500_dir);
-
 	debugfs_create_file("all-bank-registers", S_IRUGO, ab8500_dir,
 			    &plf->dev, &ab8500_bank_registers_fops);
 	debugfs_create_file("all-banks", S_IRUGO, ab8500_dir,
@@ -2727,83 +2089,6 @@ static int ab8500_debug_probe(struct platform_device *plf)
 			    &plf->dev, &ab8500_hwreg_fops);
 	debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP),
 			    ab8500_dir, &plf->dev, &ab8500_modem_fops);
-	debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_bat_ctrl_fops);
-	debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_btemp_ball_fops);
-	debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_main_charger_v_fops);
-	debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_acc_detect1_fops);
-	debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_acc_detect2_fops);
-	debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_aux1_fops);
-	debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_aux2_fops);
-	debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_main_bat_v_fops);
-	debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_vbus_v_fops);
-	debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_main_charger_c_fops);
-	debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_usb_charger_c_fops);
-	debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_bk_bat_v_fops);
-	debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_die_temp_fops);
-	debugfs_create_file("usb_id", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_usb_id_fops);
-	if (is_ab8540(ab8500)) {
-		debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_xtal_temp_fops);
-		debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_vbat_true_meas_fops);
-		debugfs_create_file("batctrl_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_bat_ctrl_and_ibat_fops);
-		debugfs_create_file("vbatmeas_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_vbat_meas_and_ibat_fops);
-		debugfs_create_file("vbattruemeas_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_vbat_true_meas_and_ibat_fops);
-		debugfs_create_file("battemp_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_bat_temp_and_ibat_fops);
-		debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_otp_calib_fops);
-	}
-	debugfs_create_file("avg_sample", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_avg_sample_fops);
-	debugfs_create_file("trig_edge", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_trig_edge_fops);
-	debugfs_create_file("trig_timer", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_trig_timer_fops);
-	debugfs_create_file("conv_type", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_conv_type_fops);
 
 	return 0;
 }
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
deleted file mode 100644
index 005f9ee34cd1..000000000000
--- a/drivers/mfd/ab8500-gpadc.c
+++ /dev/null
@@ -1,1075 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Arun R Murthy <arun.murthy@stericsson.com>
- * Author: Daniel Willerud <daniel.willerud@stericsson.com>
- * Author: Johan Palsson <johan.palsson@stericsson.com>
- * Author: M'boumba Cedric Madianga
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/pm_runtime.h>
-#include <linux/platform_device.h>
-#include <linux/completion.h>
-#include <linux/regulator/consumer.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
-
-/*
- * GPADC register offsets
- * Bank : 0x0A
- */
-#define AB8500_GPADC_CTRL1_REG		0x00
-#define AB8500_GPADC_CTRL2_REG		0x01
-#define AB8500_GPADC_CTRL3_REG		0x02
-#define AB8500_GPADC_AUTO_TIMER_REG	0x03
-#define AB8500_GPADC_STAT_REG		0x04
-#define AB8500_GPADC_MANDATAL_REG	0x05
-#define AB8500_GPADC_MANDATAH_REG	0x06
-#define AB8500_GPADC_AUTODATAL_REG	0x07
-#define AB8500_GPADC_AUTODATAH_REG	0x08
-#define AB8500_GPADC_MUX_CTRL_REG	0x09
-#define AB8540_GPADC_MANDATA2L_REG	0x09
-#define AB8540_GPADC_MANDATA2H_REG	0x0A
-#define AB8540_GPADC_APEAAX_REG		0x10
-#define AB8540_GPADC_APEAAT_REG		0x11
-#define AB8540_GPADC_APEAAM_REG		0x12
-#define AB8540_GPADC_APEAAH_REG		0x13
-#define AB8540_GPADC_APEAAL_REG		0x14
-
-/*
- * OTP register offsets
- * Bank : 0x15
- */
-#define AB8500_GPADC_CAL_1	0x0F
-#define AB8500_GPADC_CAL_2	0x10
-#define AB8500_GPADC_CAL_3	0x11
-#define AB8500_GPADC_CAL_4	0x12
-#define AB8500_GPADC_CAL_5	0x13
-#define AB8500_GPADC_CAL_6	0x14
-#define AB8500_GPADC_CAL_7	0x15
-/* New calibration for 8540 */
-#define AB8540_GPADC_OTP4_REG_7	0x38
-#define AB8540_GPADC_OTP4_REG_6	0x39
-#define AB8540_GPADC_OTP4_REG_5	0x3A
-
-/* gpadc constants */
-#define EN_VINTCORE12		0x04
-#define EN_VTVOUT		0x02
-#define EN_GPADC		0x01
-#define DIS_GPADC		0x00
-#define AVG_1			0x00
-#define AVG_4			0x20
-#define AVG_8			0x40
-#define AVG_16			0x60
-#define ADC_SW_CONV		0x04
-#define EN_ICHAR		0x80
-#define BTEMP_PULL_UP		0x08
-#define EN_BUF			0x40
-#define DIS_ZERO		0x00
-#define GPADC_BUSY		0x01
-#define EN_FALLING		0x10
-#define EN_TRIG_EDGE		0x02
-#define EN_VBIAS_XTAL_TEMP	0x02
-
-/* GPADC constants from AB8500 spec, UM0836 */
-#define ADC_RESOLUTION		1024
-#define ADC_CH_BTEMP_MIN	0
-#define ADC_CH_BTEMP_MAX	1350
-#define ADC_CH_DIETEMP_MIN	0
-#define ADC_CH_DIETEMP_MAX	1350
-#define ADC_CH_CHG_V_MIN	0
-#define ADC_CH_CHG_V_MAX	20030
-#define ADC_CH_ACCDET2_MIN	0
-#define ADC_CH_ACCDET2_MAX	2500
-#define ADC_CH_VBAT_MIN		2300
-#define ADC_CH_VBAT_MAX		4800
-#define ADC_CH_CHG_I_MIN	0
-#define ADC_CH_CHG_I_MAX	1500
-#define ADC_CH_BKBAT_MIN	0
-#define ADC_CH_BKBAT_MAX	3200
-
-/* GPADC constants from AB8540 spec */
-#define ADC_CH_IBAT_MIN		(-6000) /* mA range measured by ADC for ibat */
-#define ADC_CH_IBAT_MAX		6000
-#define ADC_CH_IBAT_MIN_V	(-60)	/* mV range measured by ADC for ibat */
-#define ADC_CH_IBAT_MAX_V	60
-#define IBAT_VDROP_L		(-56)  /* mV */
-#define IBAT_VDROP_H		56
-
-/* This is used to not lose precision when dividing to get gain and offset */
-#define CALIB_SCALE		1000
-/*
- * Number of bits shift used to not lose precision
- * when dividing to get ibat gain.
- */
-#define CALIB_SHIFT_IBAT	20
-
-/* Time in ms before disabling regulator */
-#define GPADC_AUDOSUSPEND_DELAY		1
-
-#define CONVERSION_TIME			500 /* ms */
-
-enum cal_channels {
-	ADC_INPUT_VMAIN = 0,
-	ADC_INPUT_BTEMP,
-	ADC_INPUT_VBAT,
-	ADC_INPUT_IBAT,
-	NBR_CAL_INPUTS,
-};
-
-/**
- * struct adc_cal_data - Table for storing gain and offset for the calibrated
- * ADC channels
- * @gain:		Gain of the ADC channel
- * @offset:		Offset of the ADC channel
- */
-struct adc_cal_data {
-	s64 gain;
-	s64 offset;
-	u16 otp_calib_hi;
-	u16 otp_calib_lo;
-};
-
-/**
- * struct ab8500_gpadc - AB8500 GPADC device information
- * @dev:			pointer to the struct device
- * @node:			a list of AB8500 GPADCs, hence prepared for
-				reentrance
- * @parent:			pointer to the struct ab8500
- * @ab8500_gpadc_complete:	pointer to the struct completion, to indicate
- *				the completion of gpadc conversion
- * @ab8500_gpadc_lock:		structure of type mutex
- * @regu:			pointer to the struct regulator
- * @irq_sw:			interrupt number that is used by gpadc for Sw
- *				conversion
- * @irq_hw:			interrupt number that is used by gpadc for Hw
- *				conversion
- * @cal_data			array of ADC calibration data structs
- */
-struct ab8500_gpadc {
-	struct device *dev;
-	struct list_head node;
-	struct ab8500 *parent;
-	struct completion ab8500_gpadc_complete;
-	struct mutex ab8500_gpadc_lock;
-	struct regulator *regu;
-	int irq_sw;
-	int irq_hw;
-	struct adc_cal_data cal_data[NBR_CAL_INPUTS];
-};
-
-static LIST_HEAD(ab8500_gpadc_list);
-
-/**
- * ab8500_gpadc_get() - returns a reference to the primary AB8500 GPADC
- * (i.e. the first GPADC in the instance list)
- */
-struct ab8500_gpadc *ab8500_gpadc_get(char *name)
-{
-	struct ab8500_gpadc *gpadc;
-
-	list_for_each_entry(gpadc, &ab8500_gpadc_list, node) {
-		if (!strcmp(name, dev_name(gpadc->dev)))
-			return gpadc;
-	}
-
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(ab8500_gpadc_get);
-
-/**
- * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
- */
-int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
-	int ad_value)
-{
-	int res;
-
-	switch (channel) {
-	case MAIN_CHARGER_V:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
-			res = ADC_CH_CHG_V_MIN + (ADC_CH_CHG_V_MAX -
-				ADC_CH_CHG_V_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VMAIN].gain +
-			gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE;
-		break;
-
-	case XTAL_TEMP:
-	case BAT_CTRL:
-	case BTEMP_BALL:
-	case ACC_DETECT1:
-	case ADC_AUX1:
-	case ADC_AUX2:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_BTEMP].gain) {
-			res = ADC_CH_BTEMP_MIN + (ADC_CH_BTEMP_MAX -
-				ADC_CH_BTEMP_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_BTEMP].gain +
-			gpadc->cal_data[ADC_INPUT_BTEMP].offset) / CALIB_SCALE;
-		break;
-
-	case MAIN_BAT_V:
-	case VBAT_TRUE_MEAS:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) {
-			res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX -
-				ADC_CH_VBAT_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VBAT].gain +
-			gpadc->cal_data[ADC_INPUT_VBAT].offset) / CALIB_SCALE;
-		break;
-
-	case DIE_TEMP:
-		res = ADC_CH_DIETEMP_MIN +
-			(ADC_CH_DIETEMP_MAX - ADC_CH_DIETEMP_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case ACC_DETECT2:
-		res = ADC_CH_ACCDET2_MIN +
-			(ADC_CH_ACCDET2_MAX - ADC_CH_ACCDET2_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case VBUS_V:
-		res = ADC_CH_CHG_V_MIN +
-			(ADC_CH_CHG_V_MAX - ADC_CH_CHG_V_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case MAIN_CHARGER_C:
-	case USB_CHARGER_C:
-		res = ADC_CH_CHG_I_MIN +
-			(ADC_CH_CHG_I_MAX - ADC_CH_CHG_I_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case BK_BAT_V:
-		res = ADC_CH_BKBAT_MIN +
-			(ADC_CH_BKBAT_MAX - ADC_CH_BKBAT_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case IBAT_VIRTUAL_CHANNEL:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) {
-			res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX -
-				ADC_CH_IBAT_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain +
-				gpadc->cal_data[ADC_INPUT_IBAT].offset)
-				>> CALIB_SHIFT_IBAT;
-		break;
-
-	default:
-		dev_err(gpadc->dev,
-			"unknown channel, not possible to convert\n");
-		res = -EINVAL;
-		break;
-
-	}
-	return res;
-}
-EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
-
-/**
- * ab8500_gpadc_sw_hw_convert() - gpadc conversion
- * @channel:	analog channel to be converted to digital data
- * @avg_sample:  number of ADC sample to average
- * @trig_egde:  selected ADC trig edge
- * @trig_timer: selected ADC trigger delay timer
- * @conv_type: selected conversion type (HW or SW conversion)
- *
- * This function converts the selected analog i/p to digital
- * data.
- */
-int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
-{
-	int ad_value;
-	int voltage;
-
-	ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
-			trig_edge, trig_timer, conv_type);
-
-	/* On failure retry a second time */
-	if (ad_value < 0)
-		ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
-			trig_edge, trig_timer, conv_type);
-	if (ad_value < 0) {
-		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
-				channel);
-		return ad_value;
-	}
-
-	voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
-	if (voltage < 0)
-		dev_err(gpadc->dev,
-			"GPADC to voltage conversion failed ch: %d AD: 0x%x\n",
-			channel, ad_value);
-
-	return voltage;
-}
-EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
-
-/**
- * ab8500_gpadc_read_raw() - gpadc read
- * @channel:	analog channel to be read
- * @avg_sample:  number of ADC sample to average
- * @trig_edge:  selected trig edge
- * @trig_timer: selected ADC trigger delay timer
- * @conv_type: selected conversion type (HW or SW conversion)
- *
- * This function obtains the raw ADC value for an hardware conversion,
- * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage()
- */
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
-{
-	return ab8500_gpadc_double_read_raw(gpadc, channel, avg_sample,
-					    trig_edge, trig_timer, conv_type,
-					    NULL);
-}
-
-int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
-		int *ibat)
-{
-	int ret;
-	int looplimit = 0;
-	unsigned long completion_timeout;
-	u8 val, low_data, high_data, low_data2, high_data2;
-	u8 val_reg1 = 0;
-	unsigned int delay_min = 0;
-	unsigned int delay_max = 0;
-	u8 data_low_addr, data_high_addr;
-
-	if (!gpadc)
-		return -ENODEV;
-
-	/* check if convertion is supported */
-	if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW))
-		return -ENOTSUPP;
-	if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW))
-		return -ENOTSUPP;
-
-	mutex_lock(&gpadc->ab8500_gpadc_lock);
-	/* Enable VTVout LDO this is required for GPADC */
-	pm_runtime_get_sync(gpadc->dev);
-
-	/* Check if ADC is not busy, lock and proceed */
-	do {
-		ret = abx500_get_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_STAT_REG, &val);
-		if (ret < 0)
-			goto out;
-		if (!(val & GPADC_BUSY))
-			break;
-		msleep(20);
-	} while (++looplimit < 10);
-	if (looplimit >= 10 && (val & GPADC_BUSY)) {
-		dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* Enable GPADC */
-	val_reg1 |= EN_GPADC;
-
-	/* Select the channel source and set average samples */
-	switch (avg_sample) {
-	case SAMPLE_1:
-		val = channel | AVG_1;
-		break;
-	case SAMPLE_4:
-		val = channel | AVG_4;
-		break;
-	case SAMPLE_8:
-		val = channel | AVG_8;
-		break;
-	default:
-		val = channel | AVG_16;
-		break;
-	}
-
-	if (conv_type == ADC_HW) {
-		ret = abx500_set_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val);
-		val_reg1 |= EN_TRIG_EDGE;
-		if (trig_edge)
-			val_reg1 |= EN_FALLING;
-	} else
-		ret = abx500_set_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
-	if (ret < 0) {
-		dev_err(gpadc->dev,
-			"gpadc_conversion: set avg samples failed\n");
-		goto out;
-	}
-
-	/*
-	 * Enable ADC, buffering, select rising edge and enable ADC path
-	 * charging current sense if it needed, ABB 3.0 needs some special
-	 * treatment too.
-	 */
-	switch (channel) {
-	case MAIN_CHARGER_C:
-	case USB_CHARGER_C:
-		val_reg1 |= EN_BUF | EN_ICHAR;
-		break;
-	case BTEMP_BALL:
-		if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
-			val_reg1 |= EN_BUF | BTEMP_PULL_UP;
-			/*
-			* Delay might be needed for ABB8500 cut 3.0, if not,
-			* remove when hardware will be availible
-			*/
-			delay_min = 1000; /* Delay in micro seconds */
-			delay_max = 10000; /* large range optimises sleepmode */
-			break;
-		}
-		/* Intentional fallthrough */
-	default:
-		val_reg1 |= EN_BUF;
-		break;
-	}
-
-	/* Write configuration to register */
-	ret = abx500_set_register_interruptible(gpadc->dev,
-		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1);
-	if (ret < 0) {
-		dev_err(gpadc->dev,
-			"gpadc_conversion: set Control register failed\n");
-		goto out;
-	}
-
-	if (delay_min != 0)
-		usleep_range(delay_min, delay_max);
-
-	if (conv_type == ADC_HW) {
-		/* Set trigger delay timer */
-		ret = abx500_set_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"gpadc_conversion: trig timer failed\n");
-			goto out;
-		}
-		completion_timeout = 2 * HZ;
-		data_low_addr = AB8500_GPADC_AUTODATAL_REG;
-		data_high_addr = AB8500_GPADC_AUTODATAH_REG;
-	} else {
-		/* Start SW conversion */
-		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
-			ADC_SW_CONV, ADC_SW_CONV);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"gpadc_conversion: start s/w conv failed\n");
-			goto out;
-		}
-		completion_timeout = msecs_to_jiffies(CONVERSION_TIME);
-		data_low_addr = AB8500_GPADC_MANDATAL_REG;
-		data_high_addr = AB8500_GPADC_MANDATAH_REG;
-	}
-
-	/* wait for completion of conversion */
-	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
-			completion_timeout)) {
-		dev_err(gpadc->dev,
-			"timeout didn't receive GPADC conv interrupt\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* Read the converted RAW data */
-	ret = abx500_get_register_interruptible(gpadc->dev,
-			AB8500_GPADC, data_low_addr, &low_data);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
-		goto out;
-	}
-
-	ret = abx500_get_register_interruptible(gpadc->dev,
-		AB8500_GPADC, data_high_addr, &high_data);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n");
-		goto out;
-	}
-
-	/* Check if double convertion is required */
-	if ((channel == BAT_CTRL_AND_IBAT) ||
-			(channel == VBAT_MEAS_AND_IBAT) ||
-			(channel == VBAT_TRUE_MEAS_AND_IBAT) ||
-			(channel == BAT_TEMP_AND_IBAT)) {
-
-		if (conv_type == ADC_HW) {
-			/* not supported */
-			ret = -ENOTSUPP;
-			dev_err(gpadc->dev,
-				"gpadc_conversion: only SW double conversion supported\n");
-			goto out;
-		} else {
-			/* Read the converted RAW data 2 */
-			ret = abx500_get_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
-				&low_data2);
-			if (ret < 0) {
-				dev_err(gpadc->dev,
-					"gpadc_conversion: read sw low data 2 failed\n");
-				goto out;
-			}
-
-			ret = abx500_get_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
-				&high_data2);
-			if (ret < 0) {
-				dev_err(gpadc->dev,
-					"gpadc_conversion: read sw high data 2 failed\n");
-				goto out;
-			}
-			if (ibat != NULL) {
-				*ibat = (high_data2 << 8) | low_data2;
-			} else {
-				dev_warn(gpadc->dev,
-					"gpadc_conversion: ibat not stored\n");
-			}
-
-		}
-	}
-
-	/* Disable GPADC */
-	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
-		goto out;
-	}
-
-	/* Disable VTVout LDO this is required for GPADC */
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
-
-	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-
-	return (high_data << 8) | low_data;
-
-out:
-	/*
-	 * It has shown to be needed to turn off the GPADC if an error occurs,
-	 * otherwise we might have problem when waiting for the busy bit in the
-	 * GPADC status register to go low. In V1.1 there wait_for_completion
-	 * seems to timeout when waiting for an interrupt.. Not seen in V2.0
-	 */
-	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-	pm_runtime_put(gpadc->dev);
-	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-	dev_err(gpadc->dev,
-		"gpadc_conversion: Failed to AD convert channel %d\n", channel);
-	return ret;
-}
-EXPORT_SYMBOL(ab8500_gpadc_read_raw);
-
-/**
- * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
- * @irq:	irq number
- * @data:	pointer to the data passed during request irq
- *
- * This is a interrupt service routine for gpadc conversion completion.
- * Notifies the gpadc completion is completed and the converted raw value
- * can be read from the registers.
- * Returns IRQ status(IRQ_HANDLED)
- */
-static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc)
-{
-	struct ab8500_gpadc *gpadc = _gpadc;
-
-	complete(&gpadc->ab8500_gpadc_complete);
-
-	return IRQ_HANDLED;
-}
-
-static int otp_cal_regs[] = {
-	AB8500_GPADC_CAL_1,
-	AB8500_GPADC_CAL_2,
-	AB8500_GPADC_CAL_3,
-	AB8500_GPADC_CAL_4,
-	AB8500_GPADC_CAL_5,
-	AB8500_GPADC_CAL_6,
-	AB8500_GPADC_CAL_7,
-};
-
-static int otp4_cal_regs[] = {
-	AB8540_GPADC_OTP4_REG_7,
-	AB8540_GPADC_OTP4_REG_6,
-	AB8540_GPADC_OTP4_REG_5,
-};
-
-static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
-{
-	int i;
-	int ret[ARRAY_SIZE(otp_cal_regs)];
-	u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
-	int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
-	u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
-	int vmain_high, vmain_low;
-	int btemp_high, btemp_low;
-	int vbat_high, vbat_low;
-	int ibat_high, ibat_low;
-	s64 V_gain, V_offset, V2A_gain, V2A_offset;
-	struct ab8500 *ab8500;
-
-	ab8500 = gpadc->parent;
-
-	/* First we read all OTP registers and store the error code */
-	for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
-		ret[i] = abx500_get_register_interruptible(gpadc->dev,
-			AB8500_OTP_EMUL, otp_cal_regs[i],  &gpadc_cal[i]);
-		if (ret[i] < 0)
-			dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n",
-				__func__, otp_cal_regs[i]);
-	}
-
-	/*
-	 * The ADC calibration data is stored in OTP registers.
-	 * The layout of the calibration data is outlined below and a more
-	 * detailed description can be found in UM0836
-	 *
-	 * vm_h/l = vmain_high/low
-	 * bt_h/l = btemp_high/low
-	 * vb_h/l = vbat_high/low
-	 *
-	 * Data bits 8500/9540:
-	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |						   | vm_h9 | vm_h8
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |		   | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 *
-	 * Data bits 8540:
-	 * OTP2
-	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 *
-	 * Data bits 8540:
-	 * OTP4
-	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |					   | ib_h9 | ib_h8 | ib_h7
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
-	 *
-	 *
-	 * Ideal output ADC codes corresponding to injected input voltages
-	 * during manufacturing is:
-	 *
-	 * vmain_high: Vin = 19500mV / ADC ideal code = 997
-	 * vmain_low:  Vin = 315mV   / ADC ideal code = 16
-	 * btemp_high: Vin = 1300mV  / ADC ideal code = 985
-	 * btemp_low:  Vin = 21mV    / ADC ideal code = 16
-	 * vbat_high:  Vin = 4700mV  / ADC ideal code = 982
-	 * vbat_low:   Vin = 2380mV  / ADC ideal code = 33
-	 */
-
-	if (is_ab8540(ab8500)) {
-		/* Calculate gain and offset for VMAIN if all reads succeeded*/
-		if (!(ret[1] < 0 || ret[2] < 0)) {
-			vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
-				((gpadc_cal[2] & 0xC0) >> 6));
-			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
-				(u16)vmain_high;
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
-				(u16)vmain_low;
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
-				(19500 - 315) / (vmain_high - vmain_low);
-			gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
-				19500 - (CALIB_SCALE * (19500 - 315) /
-				(vmain_high - vmain_low)) * vmain_high;
-		} else {
-		gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
-		}
-
-		/* Read IBAT calibration Data */
-		for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
-			ret_otp4[i] = abx500_get_register_interruptible(
-					gpadc->dev, AB8500_OTP_EMUL,
-					otp4_cal_regs[i],  &gpadc_otp4[i]);
-			if (ret_otp4[i] < 0)
-				dev_err(gpadc->dev,
-					"%s: read otp4 reg 0x%02x failed\n",
-					__func__, otp4_cal_regs[i]);
-		}
-
-		/* Calculate gain and offset for IBAT if all reads succeeded */
-		if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
-			ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
-				((gpadc_otp4[1] & 0xFE) >> 1));
-			ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
-				((gpadc_otp4[2] & 0xF8) >> 3));
-
-			gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi =
-				(u16)ibat_high;
-			gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo =
-				(u16)ibat_low;
-
-			V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L)
-				<< CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
-
-			V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) -
-				(((IBAT_VDROP_H - IBAT_VDROP_L) <<
-				CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
-				* ibat_high;
-			/*
-			 * Result obtained is in mV (at a scale factor),
-			 * we need to calculate gain and offset to get mA
-			 */
-			V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/
-				(ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
-			V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN -
-				ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V)
-				<< CALIB_SHIFT_IBAT)
-				/ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
-
-			gpadc->cal_data[ADC_INPUT_IBAT].gain =
-				V_gain * V2A_gain;
-			gpadc->cal_data[ADC_INPUT_IBAT].offset =
-				V_offset * V2A_gain + V2A_offset;
-		} else {
-			gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
-		}
-
-		dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n",
-			gpadc->cal_data[ADC_INPUT_IBAT].gain,
-			gpadc->cal_data[ADC_INPUT_IBAT].offset);
-	} else {
-		/* Calculate gain and offset for VMAIN if all reads succeeded */
-		if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
-			vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
-				((gpadc_cal[1] & 0x3F) << 2) |
-				((gpadc_cal[2] & 0xC0) >> 6));
-			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
-				(u16)vmain_high;
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
-				(u16)vmain_low;
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
-				(19500 - 315) / (vmain_high - vmain_low);
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
-				19500 - (CALIB_SCALE * (19500 - 315) /
-				(vmain_high - vmain_low)) * vmain_high;
-		} else {
-			gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
-		}
-	}
-
-	/* Calculate gain and offset for BTEMP if all reads succeeded */
-	if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
-		btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
-			(gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
-		btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
-
-		gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high;
-		gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low;
-
-		gpadc->cal_data[ADC_INPUT_BTEMP].gain =
-			CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
-		gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 -
-			(CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
-			* btemp_high;
-	} else {
-		gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0;
-	}
-
-	/* Calculate gain and offset for VBAT if all reads succeeded */
-	if (!(ret[4] < 0 || ret[5] < 0 || ret[6] < 0)) {
-		vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
-		vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
-
-		gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high;
-		gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low;
-
-		gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE *
-			(4700 - 2380) /	(vbat_high - vbat_low);
-		gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 -
-			(CALIB_SCALE * (4700 - 2380) /
-			(vbat_high - vbat_low)) * vbat_high;
-	} else {
-		gpadc->cal_data[ADC_INPUT_VBAT].gain = 0;
-	}
-
-	dev_dbg(gpadc->dev, "VMAIN gain %llu offset %llu\n",
-		gpadc->cal_data[ADC_INPUT_VMAIN].gain,
-		gpadc->cal_data[ADC_INPUT_VMAIN].offset);
-
-	dev_dbg(gpadc->dev, "BTEMP gain %llu offset %llu\n",
-		gpadc->cal_data[ADC_INPUT_BTEMP].gain,
-		gpadc->cal_data[ADC_INPUT_BTEMP].offset);
-
-	dev_dbg(gpadc->dev, "VBAT gain %llu offset %llu\n",
-		gpadc->cal_data[ADC_INPUT_VBAT].gain,
-		gpadc->cal_data[ADC_INPUT_VBAT].offset);
-}
-
-#ifdef CONFIG_PM
-static int ab8500_gpadc_runtime_suspend(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-
-	regulator_disable(gpadc->regu);
-	return 0;
-}
-
-static int ab8500_gpadc_runtime_resume(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-	int ret;
-
-	ret = regulator_enable(gpadc->regu);
-	if (ret)
-		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
-	return ret;
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int ab8500_gpadc_suspend(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-
-	mutex_lock(&gpadc->ab8500_gpadc_lock);
-
-	pm_runtime_get_sync(dev);
-
-	regulator_disable(gpadc->regu);
-	return 0;
-}
-
-static int ab8500_gpadc_resume(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-	int ret;
-
-	ret = regulator_enable(gpadc->regu);
-	if (ret)
-		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
-
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
-
-	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-	return ret;
-}
-#endif
-
-static int ab8500_gpadc_probe(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = devm_kzalloc(&pdev->dev,
-			     sizeof(struct ab8500_gpadc), GFP_KERNEL);
-	if (!gpadc)
-		return -ENOMEM;
-
-	gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
-	if (gpadc->irq_sw < 0)
-		dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n");
-
-	gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
-	if (gpadc->irq_hw < 0)
-		dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n");
-
-	gpadc->dev = &pdev->dev;
-	gpadc->parent = dev_get_drvdata(pdev->dev.parent);
-	mutex_init(&gpadc->ab8500_gpadc_lock);
-
-	/* Initialize completion used to notify completion of conversion */
-	init_completion(&gpadc->ab8500_gpadc_complete);
-
-	/* Register interrupts */
-	if (gpadc->irq_sw >= 0) {
-		ret = request_threaded_irq(gpadc->irq_sw, NULL,
-			ab8500_bm_gpadcconvend_handler,
-			IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
-			"ab8500-gpadc-sw",
-			gpadc);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"Failed to register interrupt irq: %d\n",
-				gpadc->irq_sw);
-			goto fail;
-		}
-	}
-
-	if (gpadc->irq_hw >= 0) {
-		ret = request_threaded_irq(gpadc->irq_hw, NULL,
-			ab8500_bm_gpadcconvend_handler,
-			IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
-			"ab8500-gpadc-hw",
-			gpadc);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"Failed to register interrupt irq: %d\n",
-				gpadc->irq_hw);
-			goto fail_irq;
-		}
-	}
-
-	/* VTVout LDO used to power up ab8500-GPADC */
-	gpadc->regu = devm_regulator_get(&pdev->dev, "vddadc");
-	if (IS_ERR(gpadc->regu)) {
-		ret = PTR_ERR(gpadc->regu);
-		dev_err(gpadc->dev, "failed to get vtvout LDO\n");
-		goto fail_irq;
-	}
-
-	platform_set_drvdata(pdev, gpadc);
-
-	ret = regulator_enable(gpadc->regu);
-	if (ret) {
-		dev_err(gpadc->dev, "Failed to enable vtvout LDO: %d\n", ret);
-		goto fail_enable;
-	}
-
-	pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
-	pm_runtime_use_autosuspend(gpadc->dev);
-	pm_runtime_set_active(gpadc->dev);
-	pm_runtime_enable(gpadc->dev);
-
-	ab8500_gpadc_read_calibration_data(gpadc);
-	list_add_tail(&gpadc->node, &ab8500_gpadc_list);
-	dev_dbg(gpadc->dev, "probe success\n");
-
-	return 0;
-
-fail_enable:
-fail_irq:
-	free_irq(gpadc->irq_sw, gpadc);
-	free_irq(gpadc->irq_hw, gpadc);
-fail:
-	return ret;
-}
-
-static int ab8500_gpadc_remove(struct platform_device *pdev)
-{
-	struct ab8500_gpadc *gpadc = platform_get_drvdata(pdev);
-
-	/* remove this gpadc entry from the list */
-	list_del(&gpadc->node);
-	/* remove interrupt  - completion of Sw ADC conversion */
-	if (gpadc->irq_sw >= 0)
-		free_irq(gpadc->irq_sw, gpadc);
-	if (gpadc->irq_hw >= 0)
-		free_irq(gpadc->irq_hw, gpadc);
-
-	pm_runtime_get_sync(gpadc->dev);
-	pm_runtime_disable(gpadc->dev);
-
-	regulator_disable(gpadc->regu);
-
-	pm_runtime_set_suspended(gpadc->dev);
-
-	pm_runtime_put_noidle(gpadc->dev);
-
-	return 0;
-}
-
-static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
-	SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
-			   ab8500_gpadc_runtime_resume,
-			   NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend,
-				ab8500_gpadc_resume)
-
-};
-
-static struct platform_driver ab8500_gpadc_driver = {
-	.probe = ab8500_gpadc_probe,
-	.remove = ab8500_gpadc_remove,
-	.driver = {
-		.name = "ab8500-gpadc",
-		.pm = &ab8500_gpadc_pm_ops,
-	},
-};
-
-static int __init ab8500_gpadc_init(void)
-{
-	return platform_driver_register(&ab8500_gpadc_driver);
-}
-subsys_initcall_sync(ab8500_gpadc_init);
-
-/**
- * ab8540_gpadc_get_otp() - returns OTP values
- *
- */
-void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
-			u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
-			u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h)
-{
-	*vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo;
-	*vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
-	*btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
-	*btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
-	*vbat_l  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
-	*vbat_h  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
-	*ibat_l  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
-	*ibat_h  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
-}
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index 44ca983a49a1..d94e3267c3b6 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -131,7 +131,7 @@ static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode,
 static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
 			   void *cmd)
 {
-	writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST),
+	writel(AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST,
 	       at91_rstc_base);
 
 	return NOTIFY_DONE;
@@ -140,9 +140,7 @@ static int sama5d3_restart(struct notifier_block *this, unsigned long mode,
 static int samx7_restart(struct notifier_block *this, unsigned long mode,
 			 void *cmd)
 {
-	writel(cpu_to_le32(AT91_RSTC_KEY | AT91_RSTC_PROCRST),
-	       at91_rstc_base);
-
+	writel(AT91_RSTC_KEY | AT91_RSTC_PROCRST, at91_rstc_base);
 	return NOTIFY_DONE;
 }
 
diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index e341cc5c0ea6..1c18f465a245 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -269,6 +269,12 @@ static const struct of_device_id at91_shdwc_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
 
+static const struct of_device_id at91_pmc_ids[] = {
+	{ .compatible = "atmel,sama5d2-pmc" },
+	{ .compatible = "microchip,sam9x60-pmc" },
+	{ /* Sentinel. */ }
+};
+
 static int __init at91_shdwc_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -313,7 +319,7 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 
 	at91_shdwc_dt_configure(pdev);
 
-	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-pmc");
+	np = of_find_matching_node(NULL, at91_pmc_ids);
 	if (!np) {
 		ret = -ENODEV;
 		goto clk_disable;
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index c84a7b1caeb6..27164a1d3c7c 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -629,7 +629,7 @@ config BATTERY_GAUGE_LTC2941
 
 config AB8500_BM
 	bool "AB8500 Battery Management Driver"
-	depends on AB8500_CORE && AB8500_GPADC
+	depends on AB8500_CORE && AB8500_GPADC && (IIO = y)
 	help
 	  Say Y to include support for AB8500 battery management.
 
diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
index 8fe81259bfd9..909f0242bacb 100644
--- a/drivers/power/supply/ab8500_btemp.c
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -26,7 +26,7 @@
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/iio/consumer.h>
 
 #define VTVOUT_V			1800
 
@@ -79,7 +79,8 @@ struct ab8500_btemp_ranges {
  * @bat_temp:		Dispatched battery temperature in degree Celsius
  * @prev_bat_temp	Last measured battery temperature in degree Celsius
  * @parent:		Pointer to the struct ab8500
- * @gpadc:		Pointer to the struct gpadc
+ * @adc_btemp_ball:	ADC channel for the battery ball temperature
+ * @adc_bat_ctrl:	ADC channel for the battery control
  * @fg:			Pointer to the struct fg
  * @bm:           	Platform specific battery management information
  * @btemp_psy:		Structure for BTEMP specific battery properties
@@ -96,7 +97,8 @@ struct ab8500_btemp {
 	int bat_temp;
 	int prev_bat_temp;
 	struct ab8500 *parent;
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *btemp_ball;
+	struct iio_channel *bat_ctrl;
 	struct ab8500_fg *fg;
 	struct abx500_bm_data *bm;
 	struct power_supply *btemp_psy;
@@ -177,13 +179,13 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
  */
 static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di)
 {
-	int vbtemp;
+	int vbtemp, ret;
 	static int prev;
 
-	vbtemp = ab8500_gpadc_convert(di->gpadc, BAT_CTRL);
-	if (vbtemp < 0) {
+	ret = iio_read_channel_processed(di->bat_ctrl, &vbtemp);
+	if (ret < 0) {
 		dev_err(di->dev,
-			"%s gpadc conversion failed, using previous value",
+			"%s ADC conversion failed, using previous value",
 			__func__);
 		return prev;
 	}
@@ -455,7 +457,7 @@ static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di,
  */
 static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
 {
-	int temp;
+	int temp, ret;
 	static int prev;
 	int rbat, rntc, vntc;
 	u8 id;
@@ -480,10 +482,10 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
 			di->bm->bat_type[id].r_to_t_tbl,
 			di->bm->bat_type[id].n_temp_tbl_elements, rbat);
 	} else {
-		vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL);
-		if (vntc < 0) {
+		ret = iio_read_channel_processed(di->btemp_ball, &vntc);
+		if (ret < 0) {
 			dev_err(di->dev,
-				"%s gpadc conversion failed,"
+				"%s ADC conversion failed,"
 				" using previous value\n", __func__);
 			return prev;
 		}
@@ -1024,7 +1026,22 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	/* get parent data */
 	di->dev = &pdev->dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
-	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	/* Get ADC channels */
+	di->btemp_ball = devm_iio_channel_get(&pdev->dev, "btemp_ball");
+	if (IS_ERR(di->btemp_ball)) {
+		if (PTR_ERR(di->btemp_ball) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get BTEMP BALL ADC channel\n");
+		return PTR_ERR(di->btemp_ball);
+	}
+	di->bat_ctrl = devm_iio_channel_get(&pdev->dev, "bat_ctrl");
+	if (IS_ERR(di->bat_ctrl)) {
+		if (PTR_ERR(di->bat_ctrl) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get BAT CTRL ADC channel\n");
+		return PTR_ERR(di->bat_ctrl);
+	}
 
 	di->initialized = false;
 
@@ -1082,6 +1099,11 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	/* Register interrupts */
 	for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+		if (irq < 0) {
+			ret = irq;
+			goto free_irq;
+		}
+
 		ret = request_threaded_irq(irq, NULL, ab8500_btemp_irq[i].isr,
 			IRQF_SHARED | IRQF_NO_SUSPEND,
 			ab8500_btemp_irq[i].name, di);
@@ -1104,13 +1126,13 @@ static int ab8500_btemp_probe(struct platform_device *pdev)
 	return ret;
 
 free_irq:
-	power_supply_unregister(di->btemp_psy);
-
 	/* We also have to free all successfully registered irqs */
 	for (i = i - 1; i >= 0; i--) {
 		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
 		free_irq(irq, di);
 	}
+
+	power_supply_unregister(di->btemp_psy);
 free_btemp_wq:
 	destroy_workqueue(di->btemp_wq);
 	return ret;
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index e51d0e72beea..8a0f9d769690 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -29,10 +29,10 @@
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
 #include <linux/mfd/abx500/ux500_chargalg.h>
 #include <linux/usb/otg.h>
 #include <linux/mutex.h>
+#include <linux/iio/consumer.h>
 
 /* Charger constants */
 #define NO_PW_CONN			0
@@ -233,7 +233,10 @@ struct ab8500_charger_max_usb_in_curr {
  * @current_stepping_sessions:
  *			Counter for current stepping sessions
  * @parent:		Pointer to the struct ab8500
- * @gpadc:		Pointer to the struct gpadc
+ * @adc_main_charger_v	ADC channel for main charger voltage
+ * @adc_main_charger_c	ADC channel for main charger current
+ * @adc_vbus_v		ADC channel for USB charger voltage
+ * @adc_usb_charger_c	ADC channel for USB charger current
  * @bm:           	Platform specific battery management information
  * @flags:		Structure for information about events triggered
  * @usb_state:		Structure for usb stack information
@@ -283,7 +286,10 @@ struct ab8500_charger {
 	int is_aca_rid;
 	atomic_t current_stepping_sessions;
 	struct ab8500 *parent;
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *adc_main_charger_v;
+	struct iio_channel *adc_main_charger_c;
+	struct iio_channel *adc_vbus_v;
+	struct iio_channel *adc_usb_charger_c;
 	struct abx500_bm_data *bm;
 	struct ab8500_charger_event_flags flags;
 	struct ab8500_charger_usb_state usb_state;
@@ -459,13 +465,13 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
  */
 static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di)
 {
-	int vch;
+	int vch, ret;
 
 	/* Only measure voltage if the charger is connected */
 	if (di->ac.charger_connected) {
-		vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V);
-		if (vch < 0)
-			dev_err(di->dev, "%s gpadc conv failed,\n", __func__);
+		ret = iio_read_channel_processed(di->adc_main_charger_v, &vch);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		vch = 0;
 	}
@@ -510,13 +516,13 @@ static int ab8500_charger_ac_cv(struct ab8500_charger *di)
  */
 static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
 {
-	int vch;
+	int vch, ret;
 
 	/* Only measure voltage if the charger is connected */
 	if (di->usb.charger_connected) {
-		vch = ab8500_gpadc_convert(di->gpadc, VBUS_V);
-		if (vch < 0)
-			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+		ret = iio_read_channel_processed(di->adc_vbus_v, &vch);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		vch = 0;
 	}
@@ -532,13 +538,13 @@ static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
  */
 static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
 {
-	int ich;
+	int ich, ret;
 
 	/* Only measure current if the charger is online */
 	if (di->usb.charger_online) {
-		ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C);
-		if (ich < 0)
-			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+		ret = iio_read_channel_processed(di->adc_usb_charger_c, &ich);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		ich = 0;
 	}
@@ -554,13 +560,13 @@ static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
  */
 static int ab8500_charger_get_ac_current(struct ab8500_charger *di)
 {
-	int ich;
+	int ich, ret;
 
 	/* Only measure current if the charger is online */
 	if (di->ac.charger_online) {
-		ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C);
-		if (ich < 0)
-			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+		ret = iio_read_channel_processed(di->adc_main_charger_c, &ich);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
 	} else {
 		ich = 0;
 	}
@@ -3371,7 +3377,39 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	/* get parent data */
 	di->dev = &pdev->dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
-	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	/* Get ADC channels */
+	di->adc_main_charger_v = devm_iio_channel_get(&pdev->dev,
+						      "main_charger_v");
+	if (IS_ERR(di->adc_main_charger_v)) {
+		if (PTR_ERR(di->adc_main_charger_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC main charger voltage\n");
+		return PTR_ERR(di->adc_main_charger_v);
+	}
+	di->adc_main_charger_c = devm_iio_channel_get(&pdev->dev,
+						      "main_charger_c");
+	if (IS_ERR(di->adc_main_charger_c)) {
+		if (PTR_ERR(di->adc_main_charger_c) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC main charger current\n");
+		return PTR_ERR(di->adc_main_charger_c);
+	}
+	di->adc_vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
+	if (IS_ERR(di->adc_vbus_v)) {
+		if (PTR_ERR(di->adc_vbus_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC USB charger voltage\n");
+		return PTR_ERR(di->adc_vbus_v);
+	}
+	di->adc_usb_charger_c = devm_iio_channel_get(&pdev->dev,
+						     "usb_charger_c");
+	if (IS_ERR(di->adc_usb_charger_c)) {
+		if (PTR_ERR(di->adc_usb_charger_c) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get ADC USB charger current\n");
+		return PTR_ERR(di->adc_usb_charger_c);
+	}
 
 	/* initialize lock */
 	spin_lock_init(&di->usb_state.usb_lock);
@@ -3556,6 +3594,11 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	/* Register interrupts */
 	for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+		if (irq < 0) {
+			ret = irq;
+			goto free_irq;
+		}
+
 		ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr,
 			IRQF_SHARED | IRQF_NO_SUSPEND,
 			ab8500_charger_irq[i].name, di);
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 6fc4bc30644c..c3912ee9eb99 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -32,7 +32,7 @@
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/iio/consumer.h>
 #include <linux/kernel.h>
 
 #define MILLI_TO_MICRO			1000
@@ -182,7 +182,7 @@ struct inst_curr_result_list {
  * @bat_cap:		Structure for battery capacity specific parameters
  * @avg_cap:		Average capacity filter
  * @parent:		Pointer to the struct ab8500
- * @gpadc:		Pointer to the struct gpadc
+ * @main_bat_v:		ADC channel for the main battery voltage
  * @bm:           	Platform specific battery management information
  * @fg_psy:		Structure that holds the FG specific battery properties
  * @fg_wq:		Work queue for running the FG algorithm
@@ -224,7 +224,7 @@ struct ab8500_fg {
 	struct ab8500_fg_battery_capacity bat_cap;
 	struct ab8500_fg_avg_cap avg_cap;
 	struct ab8500 *parent;
-	struct ab8500_gpadc *gpadc;
+	struct iio_channel *main_bat_v;
 	struct abx500_bm_data *bm;
 	struct power_supply *fg_psy;
 	struct workqueue_struct *fg_wq;
@@ -829,13 +829,13 @@ exit:
  */
 static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
 {
-	int vbat;
+	int vbat, ret;
 	static int prev;
 
-	vbat = ab8500_gpadc_convert(di->gpadc, MAIN_BAT_V);
-	if (vbat < 0) {
+	ret = iio_read_channel_processed(di->main_bat_v, &vbat);
+	if (ret < 0) {
 		dev_err(di->dev,
-			"%s gpadc conversion failed, using previous value\n",
+			"%s ADC conversion failed, using previous value\n",
 			__func__);
 		return prev;
 	}
@@ -3066,7 +3066,14 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	/* get parent data */
 	di->dev = &pdev->dev;
 	di->parent = dev_get_drvdata(pdev->dev.parent);
-	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	di->main_bat_v = devm_iio_channel_get(&pdev->dev, "main_bat_v");
+	if (IS_ERR(di->main_bat_v)) {
+		if (PTR_ERR(di->main_bat_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		dev_err(&pdev->dev, "failed to get main battery ADC channel\n");
+		return PTR_ERR(di->main_bat_v);
+	}
 
 	psy_cfg.supplied_to = supply_interface;
 	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
@@ -3151,6 +3158,11 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	/* Register primary interrupt handlers */
 	for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq_th); i++) {
 		irq = platform_get_irq_byname(pdev, ab8500_fg_irq_th[i].name);
+		if (irq < 0) {
+			ret = irq;
+			goto free_irq_th;
+		}
+
 		ret = request_irq(irq, ab8500_fg_irq_th[i].isr,
 				  IRQF_SHARED | IRQF_NO_SUSPEND,
 				  ab8500_fg_irq_th[i].name, di);
@@ -3158,7 +3170,7 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 		if (ret != 0) {
 			dev_err(di->dev, "failed to request %s IRQ %d: %d\n",
 				ab8500_fg_irq_th[i].name, irq, ret);
-			goto free_irq;
+			goto free_irq_th;
 		}
 		dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
 			ab8500_fg_irq_th[i].name, irq, ret);
@@ -3166,6 +3178,11 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 
 	/* Register threaded interrupt handler */
 	irq = platform_get_irq_byname(pdev, ab8500_fg_irq_bh[0].name);
+	if (irq < 0) {
+		ret = irq;
+		goto free_irq_th;
+	}
+
 	ret = request_threaded_irq(irq, NULL, ab8500_fg_irq_bh[0].isr,
 				IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
 			ab8500_fg_irq_bh[0].name, di);
@@ -3173,7 +3190,7 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	if (ret != 0) {
 		dev_err(di->dev, "failed to request %s IRQ %d: %d\n",
 			ab8500_fg_irq_bh[0].name, irq, ret);
-		goto free_irq;
+		goto free_irq_th;
 	}
 	dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
 		ab8500_fg_irq_bh[0].name, irq, ret);
@@ -3212,15 +3229,17 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 	return ret;
 
 free_irq:
-	power_supply_unregister(di->fg_psy);
-
 	/* We also have to free all registered irqs */
-	for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq_th); i++) {
+	irq = platform_get_irq_byname(pdev, ab8500_fg_irq_bh[0].name);
+	free_irq(irq, di);
+free_irq_th:
+	while (--i >= 0) {
+		/* Last assignment of i from primary interrupt handlers */
 		irq = platform_get_irq_byname(pdev, ab8500_fg_irq_th[i].name);
 		free_irq(irq, di);
 	}
-	irq = platform_get_irq_byname(pdev, ab8500_fg_irq_bh[0].name);
-	free_irq(irq, di);
+
+	power_supply_unregister(di->fg_psy);
 free_inst_curr_wq:
 	destroy_workqueue(di->fg_wq);
 	return ret;
diff --git a/drivers/power/supply/abx500_chargalg.c b/drivers/power/supply/abx500_chargalg.c
index 23757fb10479..e6e37d4f20e4 100644
--- a/drivers/power/supply/abx500_chargalg.c
+++ b/drivers/power/supply/abx500_chargalg.c
@@ -354,13 +354,13 @@ static int abx500_chargalg_check_charger_enable(struct abx500_chargalg *di)
 
 	if (di->chg_info.charger_type & USB_CHG) {
 		return di->usb_chg->ops.check_enable(di->usb_chg,
-                         di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
-                         di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+			di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+			di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
 	} else if ((di->chg_info.charger_type & AC_CHG) &&
 		   !(di->ac_chg->external)) {
 		return di->ac_chg->ops.check_enable(di->ac_chg,
-                         di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
-                         di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+			di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+			di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
 	}
 	return 0;
 }
diff --git a/drivers/power/supply/axp20x_usb_power.c b/drivers/power/supply/axp20x_usb_power.c
index dc4c316eff81..5f0a5722b19e 100644
--- a/drivers/power/supply/axp20x_usb_power.c
+++ b/drivers/power/supply/axp20x_usb_power.c
@@ -48,6 +48,8 @@
 
 #define AXP20X_VBUS_MON_VBUS_VALID	BIT(3)
 
+#define AXP813_BC_EN		BIT(0)
+
 /*
  * Note do not raise the debounce time, we must report Vusb high within
  * 100ms otherwise we get Vbus errors in musb.
@@ -495,6 +497,12 @@ static int axp20x_usb_power_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	if (power->axp20x_id == AXP813_ID) {
+		/* Enable USB Battery Charging specification detection */
+		regmap_update_bits(axp20x->regmap, AXP288_BC_GLOBAL,
+				   AXP813_BC_EN, AXP813_BC_EN);
+	}
+
 	psy_cfg.of_node = pdev->dev.of_node;
 	psy_cfg.drv_data = power;
 
diff --git a/drivers/power/supply/bd70528-charger.c b/drivers/power/supply/bd70528-charger.c
index 1bb32b7226d7..b8e1ec106627 100644
--- a/drivers/power/supply/bd70528-charger.c
+++ b/drivers/power/supply/bd70528-charger.c
@@ -741,3 +741,4 @@ module_platform_driver(bd70528_power);
 MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
 MODULE_DESCRIPTION("BD70528 power-supply driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd70528-power");
diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
index 61d6447d1966..6e9392901b0a 100644
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -33,8 +33,6 @@
 #include <linux/iio/types.h>
 #include <linux/mfd/motorola-cpcap.h>
 
-#include <asm/div64.h>
-
 /*
  * Register bit defines for CPCAP_REG_BPEOL. Some of these seem to
  * map to MC13783UG.pdf "Table 5-19. Register 13, Power Control 0"
@@ -52,6 +50,26 @@
 #define CPCAP_REG_BPEOL_BIT_BATTDETEN	BIT(1)	/* Enable battery detect */
 #define CPCAP_REG_BPEOL_BIT_EOLSEL	BIT(0)	/* BPDET = 0, EOL = 1 */
 
+/*
+ * Register bit defines for CPCAP_REG_CCC1. These seem similar to the twl6030
+ * coulomb counter registers rather than the mc13892 registers. Both twl6030
+ * and mc13892 set bits 2 and 1 to reset and clear registers. But mc13892
+ * sets bit 0 to start the coulomb counter while twl6030 sets bit 0 to stop
+ * the coulomb counter like cpcap does. So for now, we use the twl6030 style
+ * naming for the registers.
+ */
+#define CPCAP_REG_CCC1_ACTIVE_MODE1	BIT(4)	/* Update rate */
+#define CPCAP_REG_CCC1_ACTIVE_MODE0	BIT(3)	/* Update rate */
+#define CPCAP_REG_CCC1_AUTOCLEAR	BIT(2)	/* Resets sample registers */
+#define CPCAP_REG_CCC1_CAL_EN		BIT(1)	/* Clears after write in 1s */
+#define CPCAP_REG_CCC1_PAUSE		BIT(0)	/* Stop counters, allow write */
+#define CPCAP_REG_CCC1_RESET_MASK	(CPCAP_REG_CCC1_AUTOCLEAR | \
+					 CPCAP_REG_CCC1_CAL_EN)
+
+#define CPCAP_REG_CCCC2_RATE1		BIT(5)
+#define CPCAP_REG_CCCC2_RATE0		BIT(4)
+#define CPCAP_REG_CCCC2_ENABLE		BIT(3)
+
 #define CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS	250
 
 enum {
@@ -64,6 +82,7 @@ enum {
 
 enum cpcap_battery_irq_action {
 	CPCAP_BATTERY_IRQ_ACTION_NONE,
+	CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE,
 	CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW,
 	CPCAP_BATTERY_IRQ_ACTION_POWEROFF,
 };
@@ -76,15 +95,16 @@ struct cpcap_interrupt_desc {
 };
 
 struct cpcap_battery_config {
-	int ccm;
 	int cd_factor;
 	struct power_supply_info info;
+	struct power_supply_battery_info bat;
 };
 
 struct cpcap_coulomb_counter_data {
 	s32 sample;		/* 24 or 32 bits */
 	s32 accumulator;
 	s16 offset;		/* 9 bits */
+	s16 integrator;		/* 13 or 16 bits */
 };
 
 enum cpcap_battery_state {
@@ -110,6 +130,7 @@ struct cpcap_battery_ddata {
 	struct power_supply *psy;
 	struct cpcap_battery_config config;
 	struct cpcap_battery_state_data state[CPCAP_BATTERY_STATE_NR];
+	u32 cc_lsb;		/* μAms per LSB */
 	atomic_t active;
 	int status;
 	u16 vendor;
@@ -217,41 +238,17 @@ static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
 				    s16 offset, u32 divider)
 {
 	s64 acc;
-	u64 tmp;
-	int avg_current;
-	u32 cc_lsb;
 
 	if (!divider)
 		return 0;
 
-	switch (ddata->vendor) {
-	case CPCAP_VENDOR_ST:
-		cc_lsb = 95374;		/* μAms per LSB */
-		break;
-	case CPCAP_VENDOR_TI:
-		cc_lsb = 91501;		/* μAms per LSB */
-		break;
-	default:
-		return -EINVAL;
-	}
-
 	acc = accumulator;
-	acc = acc - ((s64)sample * offset);
-	cc_lsb = (cc_lsb * ddata->config.cd_factor) / 1000;
+	acc -= (s64)sample * offset;
+	acc *= ddata->cc_lsb;
+	acc *= -1;
+	acc = div_s64(acc, divider);
 
-	if (acc >=  0)
-		tmp = acc;
-	else
-		tmp = acc * -1;
-
-	tmp = tmp * cc_lsb;
-	do_div(tmp, divider);
-	avg_current = tmp;
-
-	if (acc >= 0)
-		return -avg_current;
-	else
-		return avg_current;
+	return acc;
 }
 
 /* 3600000μAms = 1μAh */
@@ -293,12 +290,13 @@ static int
 cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
 			       struct cpcap_coulomb_counter_data *ccd)
 {
-	u16 buf[7];	/* CPCAP_REG_CC1 to CCI */
+	u16 buf[7];	/* CPCAP_REG_CCS1 to CCI */
 	int error;
 
 	ccd->sample = 0;
 	ccd->accumulator = 0;
 	ccd->offset = 0;
+	ccd->integrator = 0;
 
 	/* Read coulomb counter register range */
 	error = regmap_bulk_read(ddata->reg, CPCAP_REG_CCS1,
@@ -323,6 +321,12 @@ cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
 	ccd->offset = buf[4];
 	ccd->offset = sign_extend32(ccd->offset, 9);
 
+	/* Integrator register CPCAP_REG_CCI */
+	if (ddata->vendor == CPCAP_VENDOR_TI)
+		ccd->integrator = sign_extend32(buf[6], 13);
+	else
+		ccd->integrator = (s16)buf[6];
+
 	return cpcap_battery_cc_to_uah(ddata,
 				       ccd->sample,
 				       ccd->accumulator,
@@ -336,31 +340,28 @@ cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
 static int cpcap_battery_cc_get_avg_current(struct cpcap_battery_ddata *ddata)
 {
 	int value, acc, error;
-	s32 sample = 1;
+	s32 sample;
 	s16 offset;
 
-	if (ddata->vendor == CPCAP_VENDOR_ST)
-		sample = 4;
-
 	/* Coulomb counter integrator */
 	error = regmap_read(ddata->reg, CPCAP_REG_CCI, &value);
 	if (error)
 		return error;
 
-	if ((ddata->vendor == CPCAP_VENDOR_TI) && (value > 0x2000))
-		value = value | 0xc000;
-
-	acc = (s16)value;
+	if (ddata->vendor == CPCAP_VENDOR_TI) {
+		acc = sign_extend32(value, 13);
+		sample = 1;
+	} else {
+		acc = (s16)value;
+		sample = 4;
+	}
 
-	/* Coulomb counter sample time */
+	/* Coulomb counter calibration offset  */
 	error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
 	if (error)
 		return error;
 
-	if (value < 0x200)
-		offset = value;
-	else
-		offset = value | 0xfc00;
+	offset = sign_extend32(value, 9);
 
 	return cpcap_battery_cc_to_ua(ddata, sample, acc, offset);
 }
@@ -369,8 +370,8 @@ static bool cpcap_battery_full(struct cpcap_battery_ddata *ddata)
 {
 	struct cpcap_battery_state_data *state = cpcap_battery_latest(ddata);
 
-	/* Basically anything that measures above 4347000 is full */
-	if (state->voltage >= (ddata->config.info.voltage_max_design - 4000))
+	if (state->voltage >=
+	    (ddata->config.bat.constant_charge_voltage_max_uv - 18000))
 		return true;
 
 	return false;
@@ -417,6 +418,7 @@ static enum power_supply_property cpcap_battery_props[] = {
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 	POWER_SUPPLY_PROP_CURRENT_AVG,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
@@ -475,6 +477,9 @@ static int cpcap_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 		val->intval = ddata->config.info.voltage_min_design;
 		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		val->intval = ddata->config.bat.constant_charge_voltage_max_uv;
+		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 		sample = latest->cc.sample - previous->cc.sample;
 		if (!sample) {
@@ -540,6 +545,69 @@ static int cpcap_battery_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int cpcap_battery_update_charger(struct cpcap_battery_ddata *ddata,
+					int const_charge_voltage)
+{
+	union power_supply_propval prop;
+	union power_supply_propval val;
+	struct power_supply *charger;
+	int error;
+
+	charger = power_supply_get_by_name("usb");
+	if (!charger)
+		return -ENODEV;
+
+	error = power_supply_get_property(charger,
+				POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+				&prop);
+	if (error)
+		return error;
+
+	/* Allow charger const voltage lower than battery const voltage */
+	if (const_charge_voltage > prop.intval)
+		return 0;
+
+	val.intval = const_charge_voltage;
+
+	return power_supply_set_property(charger,
+			POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+			&val);
+}
+
+static int cpcap_battery_set_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      const union power_supply_propval *val)
+{
+	struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		if (val->intval < ddata->config.info.voltage_min_design)
+			return -EINVAL;
+		if (val->intval > ddata->config.info.voltage_max_design)
+			return -EINVAL;
+
+		ddata->config.bat.constant_charge_voltage_max_uv = val->intval;
+
+		return cpcap_battery_update_charger(ddata, val->intval);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cpcap_battery_property_is_writeable(struct power_supply *psy,
+					       enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 static irqreturn_t cpcap_battery_irq_thread(int irq, void *data)
 {
 	struct cpcap_battery_ddata *ddata = data;
@@ -560,14 +628,19 @@ static irqreturn_t cpcap_battery_irq_thread(int irq, void *data)
 	latest = cpcap_battery_latest(ddata);
 
 	switch (d->action) {
+	case CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE:
+		dev_info(ddata->dev, "Coulomb counter calibration done\n");
+		break;
 	case CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW:
 		if (latest->current_ua >= 0)
-			dev_warn(ddata->dev, "Battery low at 3.3V!\n");
+			dev_warn(ddata->dev, "Battery low at %imV!\n",
+				latest->voltage / 1000);
 		break;
 	case CPCAP_BATTERY_IRQ_ACTION_POWEROFF:
-		if (latest->current_ua >= 0) {
+		if (latest->current_ua >= 0 && latest->voltage <= 3200000) {
 			dev_emerg(ddata->dev,
-				  "Battery empty at 3.1V, powering off\n");
+				  "Battery empty at %imV, powering off\n",
+				  latest->voltage / 1000);
 			orderly_poweroff(true);
 		}
 		break;
@@ -609,7 +682,9 @@ static int cpcap_battery_init_irq(struct platform_device *pdev,
 	d->name = name;
 	d->irq = irq;
 
-	if (!strncmp(name, "lowbph", 6))
+	if (!strncmp(name, "cccal", 5))
+		d->action = CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE;
+	else if (!strncmp(name, "lowbph", 6))
 		d->action = CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW;
 	else if (!strncmp(name, "lowbpl", 6))
 		d->action = CPCAP_BATTERY_IRQ_ACTION_POWEROFF;
@@ -635,6 +710,9 @@ static int cpcap_battery_init_interrupts(struct platform_device *pdev,
 			return error;
 	}
 
+	/* Enable calibration interrupt if already available in dts */
+	cpcap_battery_init_irq(pdev, ddata, "cccal");
+
 	/* Enable low battery interrupts for 3.3V high and 3.1V low */
 	error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL,
 				   0xffff,
@@ -676,6 +754,60 @@ out_err:
 	return error;
 }
 
+/* Calibrate coulomb counter */
+static int cpcap_battery_calibrate(struct cpcap_battery_ddata *ddata)
+{
+	int error, ccc1, value;
+	unsigned long timeout;
+
+	error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &ccc1);
+	if (error)
+		return error;
+
+	timeout = jiffies + msecs_to_jiffies(6000);
+
+	/* Start calibration */
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
+				   0xffff,
+				   CPCAP_REG_CCC1_CAL_EN);
+	if (error)
+		goto restore;
+
+	while (time_before(jiffies, timeout)) {
+		error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &value);
+		if (error)
+			goto restore;
+
+		if (!(value & CPCAP_REG_CCC1_CAL_EN))
+			break;
+
+		error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+		if (error)
+			goto restore;
+
+		msleep(300);
+	}
+
+	/* Read calibration offset from CCM */
+	error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+	if (error)
+		goto restore;
+
+	dev_info(ddata->dev, "calibration done: 0x%04x\n", value);
+
+restore:
+	if (error)
+		dev_err(ddata->dev, "%s: error %i\n", __func__, error);
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
+				   0xffff, ccc1);
+	if (error)
+		dev_err(ddata->dev, "%s: restore error %i\n",
+			__func__, error);
+
+	return error;
+}
+
 /*
  * Based on the values from Motorola mapphone Linux kernel. In the
  * the Motorola mapphone Linux kernel tree the value for pm_cd_factor
@@ -687,12 +819,12 @@ out_err:
  * at 3078000. The device will die around 2743000.
  */
 static const struct cpcap_battery_config cpcap_battery_default_data = {
-	.ccm = 0x3ff,
 	.cd_factor = 0x3cc,
 	.info.technology = POWER_SUPPLY_TECHNOLOGY_LION,
 	.info.voltage_max_design = 4351000,
 	.info.voltage_min_design = 3100000,
 	.info.charge_full_design = 1740000,
+	.bat.constant_charge_voltage_max_uv = 4200000,
 };
 
 #ifdef CONFIG_OF
@@ -741,12 +873,19 @@ static int cpcap_battery_probe(struct platform_device *pdev)
 	if (error)
 		return error;
 
-	platform_set_drvdata(pdev, ddata);
+	switch (ddata->vendor) {
+	case CPCAP_VENDOR_ST:
+		ddata->cc_lsb = 95374;	/* μAms per LSB */
+		break;
+	case CPCAP_VENDOR_TI:
+		ddata->cc_lsb = 91501;	/* μAms per LSB */
+		break;
+	default:
+		return -EINVAL;
+	}
+	ddata->cc_lsb = (ddata->cc_lsb * ddata->config.cd_factor) / 1000;
 
-	error = regmap_update_bits(ddata->reg, CPCAP_REG_CCM,
-				   0xffff, ddata->config.ccm);
-	if (error)
-		return error;
+	platform_set_drvdata(pdev, ddata);
 
 	error = cpcap_battery_init_interrupts(pdev, ddata);
 	if (error)
@@ -760,11 +899,13 @@ static int cpcap_battery_probe(struct platform_device *pdev)
 	if (!psy_desc)
 		return -ENOMEM;
 
-	psy_desc->name = "battery",
-	psy_desc->type = POWER_SUPPLY_TYPE_BATTERY,
-	psy_desc->properties = cpcap_battery_props,
-	psy_desc->num_properties = ARRAY_SIZE(cpcap_battery_props),
-	psy_desc->get_property = cpcap_battery_get_property,
+	psy_desc->name = "battery";
+	psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+	psy_desc->properties = cpcap_battery_props;
+	psy_desc->num_properties = ARRAY_SIZE(cpcap_battery_props);
+	psy_desc->get_property = cpcap_battery_get_property;
+	psy_desc->set_property = cpcap_battery_set_property;
+	psy_desc->property_is_writeable = cpcap_battery_property_is_writeable;
 
 	psy_cfg.of_node = pdev->dev.of_node;
 	psy_cfg.drv_data = ddata;
@@ -779,6 +920,10 @@ static int cpcap_battery_probe(struct platform_device *pdev)
 
 	atomic_set(&ddata->active, 1);
 
+	error = cpcap_battery_calibrate(ddata);
+	if (error)
+		return error;
+
 	return 0;
 }
 
diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
index 74258c7fe17d..c0d452e3dc8b 100644
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -120,6 +120,13 @@ enum {
 	CPCAP_CHARGER_IIO_NR,
 };
 
+enum {
+	CPCAP_CHARGER_DISCONNECTED,
+	CPCAP_CHARGER_DETECTING,
+	CPCAP_CHARGER_CHARGING,
+	CPCAP_CHARGER_DONE,
+};
+
 struct cpcap_charger_ddata {
 	struct device *dev;
 	struct regmap *reg;
@@ -138,6 +145,8 @@ struct cpcap_charger_ddata {
 	atomic_t active;
 
 	int status;
+	int state;
+	int voltage;
 };
 
 struct cpcap_interrupt_desc {
@@ -153,6 +162,7 @@ struct cpcap_charger_ints_state {
 
 	bool chrg_se1b;
 	bool rvrs_mode;
+	bool chrgcurr2;
 	bool chrgcurr1;
 	bool vbusvld;
 
@@ -162,24 +172,26 @@ struct cpcap_charger_ints_state {
 static enum power_supply_property cpcap_charger_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 };
 
+/* No battery always shows temperature of -40000 */
 static bool cpcap_charger_battery_found(struct cpcap_charger_ddata *ddata)
 {
 	struct iio_channel *channel;
-	int error, value;
+	int error, temperature;
 
 	channel = ddata->channels[CPCAP_CHARGER_IIO_BATTDET];
-	error = iio_read_channel_raw(channel, &value);
+	error = iio_read_channel_processed(channel, &temperature);
 	if (error < 0) {
 		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
 
 		return false;
 	}
 
-	return value == 1;
+	return temperature > -20000 && temperature < 60000;
 }
 
 static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata)
@@ -224,6 +236,9 @@ static int cpcap_charger_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_STATUS:
 		val->intval = ddata->status;
 		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		val->intval = ddata->voltage;
+		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 		if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
 			val->intval = cpcap_charger_get_charge_voltage(ddata) *
@@ -248,6 +263,83 @@ static int cpcap_charger_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int cpcap_charger_match_voltage(int voltage)
+{
+	switch (voltage) {
+	case 0 ... 4100000 - 1: return 3800000;
+	case 4100000 ... 4120000 - 1: return 4100000;
+	case 4120000 ... 4150000 - 1: return 4120000;
+	case 4150000 ... 4170000 - 1: return 4150000;
+	case 4170000 ... 4200000 - 1: return 4170000;
+	case 4200000 ... 4230000 - 1: return 4200000;
+	case 4230000 ... 4250000 - 1: return 4230000;
+	case 4250000 ... 4270000 - 1: return 4250000;
+	case 4270000 ... 4300000 - 1: return 4270000;
+	case 4300000 ... 4330000 - 1: return 4300000;
+	case 4330000 ... 4350000 - 1: return 4330000;
+	case 4350000 ... 4380000 - 1: return 4350000;
+	case 4380000 ... 4400000 - 1: return 4380000;
+	case 4400000 ... 4420000 - 1: return 4400000;
+	case 4420000 ... 4440000 - 1: return 4420000;
+	case 4440000: return 4440000;
+	default: return 0;
+	}
+}
+
+static int
+cpcap_charger_get_bat_const_charge_voltage(struct cpcap_charger_ddata *ddata)
+{
+	union power_supply_propval prop;
+	struct power_supply *battery;
+	int voltage = ddata->voltage;
+	int error;
+
+	battery = power_supply_get_by_name("battery");
+	if (battery) {
+		error = power_supply_get_property(battery,
+				POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+				&prop);
+		if (!error)
+			voltage = prop.intval;
+	}
+
+	return voltage;
+}
+
+static int cpcap_charger_set_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      const union power_supply_propval *val)
+{
+	struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent);
+	int voltage, batvolt;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		voltage = cpcap_charger_match_voltage(val->intval);
+		batvolt = cpcap_charger_get_bat_const_charge_voltage(ddata);
+		if (voltage > batvolt)
+			voltage = batvolt;
+		ddata->voltage = voltage;
+		schedule_delayed_work(&ddata->detect_work, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cpcap_charger_property_is_writeable(struct power_supply *psy,
+					       enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 static void cpcap_charger_set_cable_path(struct cpcap_charger_ddata *ddata,
 					 bool enabled)
 {
@@ -422,6 +514,7 @@ static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata,
 
 	s->chrg_se1b = val & BIT(13);
 	s->rvrs_mode = val & BIT(6);
+	s->chrgcurr2 = val & BIT(5);
 	s->chrgcurr1 = val & BIT(4);
 	s->vbusvld = val & BIT(3);
 
@@ -434,6 +527,79 @@ static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata,
 	return 0;
 }
 
+static void cpcap_charger_update_state(struct cpcap_charger_ddata *ddata,
+				       int state)
+{
+	const char *status;
+
+	if (state > CPCAP_CHARGER_DONE) {
+		dev_warn(ddata->dev, "unknown state: %i\n", state);
+
+		return;
+	}
+
+	ddata->state = state;
+
+	switch (state) {
+	case CPCAP_CHARGER_DISCONNECTED:
+		status = "DISCONNECTED";
+		break;
+	case CPCAP_CHARGER_DETECTING:
+		status = "DETECTING";
+		break;
+	case CPCAP_CHARGER_CHARGING:
+		status = "CHARGING";
+		break;
+	case CPCAP_CHARGER_DONE:
+		status = "DONE";
+		break;
+	default:
+		return;
+	}
+
+	dev_dbg(ddata->dev, "state: %s\n", status);
+}
+
+static int cpcap_charger_voltage_to_regval(int voltage)
+{
+	int offset;
+
+	switch (voltage) {
+	case 0 ... 4100000 - 1:
+		return 0;
+	case 4100000 ... 4200000 - 1:
+		offset = 1;
+		break;
+	case 4200000 ... 4300000 - 1:
+		offset = 0;
+		break;
+	case 4300000 ... 4380000 - 1:
+		offset = -1;
+		break;
+	case 4380000 ... 4440000:
+		offset = -2;
+		break;
+	default:
+		return 0;
+	}
+
+	return ((voltage - 4100000) / 20000) + offset;
+}
+
+static void cpcap_charger_disconnect(struct cpcap_charger_ddata *ddata,
+				     int state, unsigned long delay)
+{
+	int error;
+
+	error = cpcap_charger_set_state(ddata, 0, 0, 0);
+	if (error)
+		return;
+
+	cpcap_charger_update_state(ddata, state);
+	power_supply_changed(ddata->usb);
+	schedule_delayed_work(&ddata->detect_work, delay);
+}
+
 static void cpcap_usb_detect(struct work_struct *work)
 {
 	struct cpcap_charger_ddata *ddata;
@@ -447,24 +613,67 @@ static void cpcap_usb_detect(struct work_struct *work)
 	if (error)
 		return;
 
+	/* Just init the state if a charger is connected with no chrg_det set */
+	if (!s.chrg_det && s.chrgcurr1 && s.vbusvld) {
+		cpcap_charger_update_state(ddata, CPCAP_CHARGER_DETECTING);
+
+		return;
+	}
+
+	/*
+	 * If battery voltage is higher than charge voltage, it may have been
+	 * charged to 4.35V by Android. Try again in 10 minutes.
+	 */
+	if (cpcap_charger_get_charge_voltage(ddata) > ddata->voltage) {
+		cpcap_charger_disconnect(ddata, CPCAP_CHARGER_DETECTING,
+					 HZ * 60 * 10);
+
+		return;
+	}
+
+	/* Throttle chrgcurr2 interrupt for charger done and retry */
+	switch (ddata->state) {
+	case CPCAP_CHARGER_CHARGING:
+		if (s.chrgcurr2)
+			break;
+		if (s.chrgcurr1 && s.vbusvld) {
+			cpcap_charger_disconnect(ddata, CPCAP_CHARGER_DONE,
+						 HZ * 5);
+			return;
+		}
+		break;
+	case CPCAP_CHARGER_DONE:
+		if (!s.chrgcurr2)
+			break;
+		cpcap_charger_disconnect(ddata, CPCAP_CHARGER_DETECTING,
+					 HZ * 5);
+		return;
+	default:
+		break;
+	}
+
 	if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) &&
 	    s.chrgcurr1) {
 		int max_current;
+		int vchrg;
 
 		if (cpcap_charger_battery_found(ddata))
 			max_current = CPCAP_REG_CRM_ICHRG_1A596;
 		else
 			max_current = CPCAP_REG_CRM_ICHRG_0A532;
 
+		vchrg = cpcap_charger_voltage_to_regval(ddata->voltage);
 		error = cpcap_charger_set_state(ddata,
-						CPCAP_REG_CRM_VCHRG_4V35,
+						CPCAP_REG_CRM_VCHRG(vchrg),
 						max_current, 0);
 		if (error)
 			goto out_err;
+		cpcap_charger_update_state(ddata, CPCAP_CHARGER_CHARGING);
 	} else {
 		error = cpcap_charger_set_state(ddata, 0, 0, 0);
 		if (error)
 			goto out_err;
+		cpcap_charger_update_state(ddata, CPCAP_CHARGER_DISCONNECTED);
 	}
 
 	power_supply_changed(ddata->usb);
@@ -524,7 +733,7 @@ static const char * const cpcap_charger_irqs[] = {
 	"chrg_det", "rvrs_chrg",
 
 	/* REG_INT1 */
-	"chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr1", "vbusvld",
+	"chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
 
 	/* REG_INT_3 */
 	"battdetb",
@@ -596,6 +805,8 @@ static const struct power_supply_desc cpcap_charger_usb_desc = {
 	.properties	= cpcap_charger_props,
 	.num_properties	= ARRAY_SIZE(cpcap_charger_props),
 	.get_property	= cpcap_charger_get_property,
+	.set_property	= cpcap_charger_set_property,
+	.property_is_writeable = cpcap_charger_property_is_writeable,
 };
 
 #ifdef CONFIG_OF
@@ -625,6 +836,7 @@ static int cpcap_charger_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	ddata->dev = &pdev->dev;
+	ddata->voltage = 4200000;
 
 	ddata->reg = dev_get_regmap(ddata->dev->parent, NULL);
 	if (!ddata->reg)
diff --git a/drivers/power/supply/test_power.c b/drivers/power/supply/test_power.c
index c3cad2b6daba..65c23ef6408d 100644
--- a/drivers/power/supply/test_power.c
+++ b/drivers/power/supply/test_power.c
@@ -33,6 +33,8 @@ static int battery_present		= 1; /* true */
 static int battery_technology		= POWER_SUPPLY_TECHNOLOGY_LION;
 static int battery_capacity		= 50;
 static int battery_voltage		= 3300;
+static int battery_charge_counter	= -1000;
+static int battery_current		= 1600;
 
 static bool module_initialized;
 
@@ -100,6 +102,9 @@ static int test_power_get_battery_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
 		val->intval = battery_capacity;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		val->intval = battery_charge_counter;
+		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
 		val->intval = 100;
@@ -114,6 +119,10 @@ static int test_power_get_battery_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 		val->intval = battery_voltage;
 		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = battery_current;
+		break;
 	default:
 		pr_info("%s: some properties deliberately report errors.\n",
 			__func__);
@@ -135,6 +144,7 @@ static enum power_supply_property test_power_battery_props[] = {
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
@@ -144,6 +154,8 @@ static enum power_supply_property test_power_battery_props[] = {
 	POWER_SUPPLY_PROP_SERIAL_NUMBER,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
 };
 
 static char *test_power_ac_supplied_to[] = {
@@ -447,6 +459,36 @@ static int param_set_battery_voltage(const char *key,
 
 #define param_get_battery_voltage param_get_int
 
+static int param_set_battery_charge_counter(const char *key,
+					const struct kernel_param *kp)
+{
+	int tmp;
+
+	if (1 != sscanf(key, "%d", &tmp))
+		return -EINVAL;
+
+	battery_charge_counter = tmp;
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+#define param_get_battery_charge_counter param_get_int
+
+static int param_set_battery_current(const char *key,
+					const struct kernel_param *kp)
+{
+	int tmp;
+
+	if (1 != sscanf(key, "%d", &tmp))
+		return -EINVAL;
+
+	battery_current = tmp;
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+#define param_get_battery_current param_get_int
+
 static const struct kernel_param_ops param_ops_ac_online = {
 	.set = param_set_ac_online,
 	.get = param_get_ac_online,
@@ -487,6 +529,16 @@ static const struct kernel_param_ops param_ops_battery_voltage = {
 	.get = param_get_battery_voltage,
 };
 
+static const struct kernel_param_ops param_ops_battery_charge_counter = {
+	.set = param_set_battery_charge_counter,
+	.get = param_get_battery_charge_counter,
+};
+
+static const struct kernel_param_ops param_ops_battery_current = {
+	.set = param_set_battery_current,
+	.get = param_get_battery_current,
+};
+
 #define param_check_ac_online(name, p) __param_check(name, p, void);
 #define param_check_usb_online(name, p) __param_check(name, p, void);
 #define param_check_battery_status(name, p) __param_check(name, p, void);
@@ -495,6 +547,8 @@ static const struct kernel_param_ops param_ops_battery_voltage = {
 #define param_check_battery_health(name, p) __param_check(name, p, void);
 #define param_check_battery_capacity(name, p) __param_check(name, p, void);
 #define param_check_battery_voltage(name, p) __param_check(name, p, void);
+#define param_check_battery_charge_counter(name, p) __param_check(name, p, void);
+#define param_check_battery_current(name, p) __param_check(name, p, void);
 
 
 module_param(ac_online, ac_online, 0644);
@@ -525,6 +579,13 @@ MODULE_PARM_DESC(battery_capacity, "battery capacity (percentage)");
 module_param(battery_voltage, battery_voltage, 0644);
 MODULE_PARM_DESC(battery_voltage, "battery voltage (millivolts)");
 
+module_param(battery_charge_counter, battery_charge_counter, 0644);
+MODULE_PARM_DESC(battery_charge_counter,
+	"battery charge counter (microampere-hours)");
+
+module_param(battery_current, battery_current, 0644);
+MODULE_PARM_DESC(battery_current, "battery current (milliampere)");
+
 MODULE_DESCRIPTION("Power supply driver for testing");
 MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
 MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h
deleted file mode 100644
index 836c944abe2e..000000000000
--- a/include/linux/mfd/abx500/ab8500-gpadc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 ST-Ericsson SA
- *
- * Author: Arun R Murthy <arun.murthy@stericsson.com>
- * Author: Daniel Willerud <daniel.willerud@stericsson.com>
- * Author: M'boumba Cedric Madianga <cedric.madianga@stericsson.com>
- */
-
-#ifndef	_AB8500_GPADC_H
-#define _AB8500_GPADC_H
-
-/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2
- * and ADCHwSel[4:0] in GPADCCtrl3 ) */
-#define BAT_CTRL		0x01
-#define BTEMP_BALL		0x02
-#define MAIN_CHARGER_V		0x03
-#define ACC_DETECT1		0x04
-#define ACC_DETECT2		0x05
-#define ADC_AUX1		0x06
-#define ADC_AUX2		0x07
-#define MAIN_BAT_V		0x08
-#define VBUS_V			0x09
-#define MAIN_CHARGER_C		0x0A
-#define USB_CHARGER_C		0x0B
-#define BK_BAT_V		0x0C
-#define DIE_TEMP		0x0D
-#define USB_ID			0x0E
-#define XTAL_TEMP		0x12
-#define VBAT_TRUE_MEAS		0x13
-#define BAT_CTRL_AND_IBAT	0x1C
-#define VBAT_MEAS_AND_IBAT	0x1D
-#define VBAT_TRUE_MEAS_AND_IBAT	0x1E
-#define BAT_TEMP_AND_IBAT	0x1F
-
-/* Virtual channel used only for ibat convertion to ampere
- * Battery current conversion (ibat) cannot be requested as a single conversion
- *  but it is always in combination with other input requests
- */
-#define IBAT_VIRTUAL_CHANNEL		0xFF
-
-#define SAMPLE_1        1
-#define SAMPLE_4        4
-#define SAMPLE_8        8
-#define SAMPLE_16       16
-#define RISING_EDGE     0
-#define FALLING_EDGE    1
-
-/* Arbitrary ADC conversion type constants */
-#define ADC_SW				0
-#define ADC_HW				1
-
-struct ab8500_gpadc;
-
-struct ab8500_gpadc *ab8500_gpadc_get(char *name);
-int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
-static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
-{
-	return ab8500_gpadc_sw_hw_convert(gpadc, channel,
-			SAMPLE_16, 0, 0, ADC_SW);
-}
-
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
-int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
-		int *ibat);
-int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
-		u8 channel, int ad_value);
-void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
-			u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
-			u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h);
-
-#endif /* _AB8500_GPADC_H */