Merge tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:

 - A new EDAC AST 2500 SoC driver (Stefan M Schaeckeler)

 - New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck)

 - Altera SDRAM functionality carveout for separate enablement of RAS
   and SDRAM capabilities on some Altera chips. (Thor Thayer)

 - The usual round of cleanups and fixes

And last but not least: recruit James Morse as a reviewer for the ARM
side.

* tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC/altera: Add separate SDRAM EDAC config
  EDAC, altera: Add missing of_node_put()
  EDAC, skx_common: Add code to recognise new compound error code
  EDAC, i10nm: Fix randconfig builds
  EDAC, i10nm: Add a driver for Intel 10nm server processors
  EDAC, skx_edac: Delete duplicated code
  EDAC, skx_common: Separate common code out from skx_edac
  EDAC: Do not check return value of debugfs_create() functions
  EDAC: Add James Morse as a reviewer
  dt-bindings, EDAC: Add Aspeed AST2500
  EDAC, aspeed: Add an Aspeed AST2500 EDAC driver

14 files changed, 2323 insertions, 1434 deletions

diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
new file mode 100644
index 000000000000..6a0f3d90d682
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
@@ -0,0 +1,25 @@
+Aspeed AST2500 SoC EDAC node
+
+The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error
+correction check).
+
+The memory controller supports SECDED (single bit error correction, double bit
+error detection) and single bit error auto scrubbing by reserving 8 bits for
+every 64 bit word (effectively reducing available memory to 8/9).
+
+Note, the bootloader must configure ECC mode in the memory controller.
+
+
+Required properties:
+- compatible: should be "aspeed,ast2500-sdram-edac"
+- reg:        sdram controller register set should be <0x1e6e0000 0x174>
+- interrupts: should be AVIC interrupt #0
+
+
+Example:
+
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2500-sdram-edac";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <0>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 275e9bb5b722..f758445317c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5503,6 +5503,12 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/amd64_edac*
 
+EDAC-AST2500
+M:	Stefan Schaeckeler <sschaeck@cisco.com>
+S:	Supported
+F:	drivers/edac/aspeed_edac.c
+F:	Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+
 EDAC-CALXEDA
 M:	Robert Richter <rric@kernel.org>
 L:	linux-edac@vger.kernel.org
@@ -5527,6 +5533,7 @@ F:	drivers/edac/thunderx_edac*
 EDAC-CORE
 M:	Borislav Petkov <bp@alien8.de>
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
+R:	James Morse <james.morse@arm.com>
 L:	linux-edac@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git for-next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac.git linux_next
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 3e4ed081505c..85ed9dbec196 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -47,6 +47,13 @@
 		reg = <0x80000000 0>;
 	};
 
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2500-sdram-edac";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <0>;
+		status = "disabled";
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e286b5b99003..47eb4d13ed5f 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -241,6 +241,18 @@ config EDAC_SKX
 	  system has non-volatile DIMMs you should also manually
 	  select CONFIG_ACPI_NFIT.
 
+config EDAC_I10NM
+	tristate "Intel 10nm server Integrated MC"
+	depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI
+	depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y
+	select DMI
+	select ACPI_ADXL
+	help
+	  Support for error detection and correction the Intel
+	  10nm server Integrated Memory Controllers. If your
+	  system has non-volatile DIMMs you should also manually
+	  select CONFIG_ACPI_NFIT.
+
 config EDAC_PND2
 	tristate "Intel Pondicherry2"
 	depends on PCI && X86_64 && X86_MCE_INTEL
@@ -379,9 +391,17 @@ config EDAC_ALTERA
 	depends on EDAC=y && (ARCH_SOCFPGA || ARCH_STRATIX10)
 	help
 	  Support for error detection and correction on the
-	  Altera SOCs. This must be selected for SDRAM ECC.
-	  Note that the preloader must initialize the SDRAM
-	  before loading the kernel.
+	  Altera SOCs. This is the global enable for the
+	  various Altera peripherals.
+
+config EDAC_ALTERA_SDRAM
+	bool "Altera SDRAM ECC"
+	depends on EDAC_ALTERA=y
+	help
+	  Support for error detection and correction on the
+	  Altera SDRAM Memory for Altera SoCs. Note that the
+	  preloader must initialize the SDRAM before loading
+	  the kernel.
 
 config EDAC_ALTERA_L2C
 	bool "Altera L2 Cache ECC"
@@ -475,4 +495,13 @@ config EDAC_QCOM
 	  For debugging issues having to do with stability and overall system
 	  health, you should probably say 'Y' here.
 
+config EDAC_ASPEED
+	tristate "Aspeed AST 2500 SoC"
+	depends on MACH_ASPEED_G5
+	help
+	  Support for error detection and correction on the Aspeed AST 2500 SoC.
+
+	  First, ECC must be configured in the bootloader. Then, this driver
+	  will expose error counters via the EDAC kernel framework.
+
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 716096d08ea0..89ad4a84a0f6 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
 obj-$(CONFIG_EDAC_I7300)		+= i7300_edac.o
 obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
 obj-$(CONFIG_EDAC_SBRIDGE)		+= sb_edac.o
-obj-$(CONFIG_EDAC_SKX)			+= skx_edac.o
 obj-$(CONFIG_EDAC_PND2)			+= pnd2_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
@@ -58,6 +57,12 @@ obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac_mod.o
 layerscape_edac_mod-y			:= fsl_ddr_edac.o layerscape_edac.o
 obj-$(CONFIG_EDAC_LAYERSCAPE)		+= layerscape_edac_mod.o
 
+skx_edac-y				:= skx_common.o skx_base.o
+obj-$(CONFIG_EDAC_SKX)			+= skx_edac.o
+
+i10nm_edac-y				:= skx_common.o i10nm_base.o
+obj-$(CONFIG_EDAC_I10NM)		+= i10nm_edac.o
+
 obj-$(CONFIG_EDAC_MV64X60)		+= mv64x60_edac.o
 obj-$(CONFIG_EDAC_CELL)			+= cell_edac.o
 obj-$(CONFIG_EDAC_PPC4XX)		+= ppc4xx_edac.o
@@ -78,3 +83,4 @@ obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
 obj-$(CONFIG_EDAC_XGENE)		+= xgene_edac.o
 obj-$(CONFIG_EDAC_TI)			+= ti_edac.o
 obj-$(CONFIG_EDAC_QCOM)			+= qcom_edac.o
+obj-$(CONFIG_EDAC_ASPEED)		+= aspeed_edac.o
diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index c89d82aa2776..1bcf9aea0cdf 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -29,6 +29,7 @@
 #define EDAC_MOD_STR		"altera_edac"
 #define EDAC_DEVICE		"Altera"
 
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
 static const struct altr_sdram_prv_data c5_data = {
 	.ecc_ctrl_offset    = CV_CTLCFG_OFST,
 	.ecc_ctl_en_mask    = CV_CTLCFG_ECC_AUTO_EN,
@@ -468,6 +469,39 @@ static int altr_sdram_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/*
+ * If you want to suspend, need to disable EDAC by removing it
+ * from the device tree or defconfig.
+ */
+#ifdef CONFIG_PM
+static int altr_sdram_prepare(struct device *dev)
+{
+	pr_err("Suspend not allowed when EDAC is enabled.\n");
+
+	return -EPERM;
+}
+
+static const struct dev_pm_ops altr_sdram_pm_ops = {
+	.prepare = altr_sdram_prepare,
+};
+#endif
+
+static struct platform_driver altr_sdram_edac_driver = {
+	.probe = altr_sdram_probe,
+	.remove = altr_sdram_remove,
+	.driver = {
+		.name = "altr_sdram_edac",
+#ifdef CONFIG_PM
+		.pm = &altr_sdram_pm_ops,
+#endif
+		.of_match_table = altr_sdram_ctrl_of_match,
+	},
+};
+
+module_platform_driver(altr_sdram_edac_driver);
+
+#endif	/* CONFIG_EDAC_ALTERA_SDRAM */
+
 /**************** Stratix 10 EDAC Memory Controller Functions ************/
 
 /**
@@ -530,37 +564,6 @@ static const struct regmap_config s10_sdram_regmap_cfg = {
 
 /************** </Stratix10 EDAC Memory Controller Functions> ***********/
 
-/*
- * If you want to suspend, need to disable EDAC by removing it
- * from the device tree or defconfig.
- */
-#ifdef CONFIG_PM
-static int altr_sdram_prepare(struct device *dev)
-{
-	pr_err("Suspend not allowed when EDAC is enabled.\n");
-
-	return -EPERM;
-}
-
-static const struct dev_pm_ops altr_sdram_pm_ops = {
-	.prepare = altr_sdram_prepare,
-};
-#endif
-
-static struct platform_driver altr_sdram_edac_driver = {
-	.probe = altr_sdram_probe,
-	.remove = altr_sdram_remove,
-	.driver = {
-		.name = "altr_sdram_edac",
-#ifdef CONFIG_PM
-		.pm = &altr_sdram_pm_ops,
-#endif
-		.of_match_table = altr_sdram_ctrl_of_match,
-	},
-};
-
-module_platform_driver(altr_sdram_edac_driver);
-
 /************************* EDAC Parent Probe *************************/
 
 static const struct of_device_id altr_edac_device_of_match[];
@@ -1046,14 +1049,17 @@ altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
 			return -ENODEV;
 		}
 
-		if (of_address_to_resource(sysmgr_np, 0, &res))
+		if (of_address_to_resource(sysmgr_np, 0, &res)) {
+			of_node_put(sysmgr_np);
 			return -ENOMEM;
+		}
 
 		/* Need physical address for SMCC call */
 		base = res.start;
 
 		ecc_mgr_map = regmap_init(NULL, NULL, (void *)base,
 					  &s10_sdram_regmap_cfg);
+		of_node_put(sysmgr_np);
 	}
 	of_node_put(np_eccmgr);
 	if (IS_ERR(ecc_mgr_map)) {
@@ -2140,11 +2146,13 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 
 			altr_edac_a10_device_add(edac, child);
 
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
 		else if ((of_device_is_compatible(child, "altr,sdram-edac-a10")) ||
 			 (of_device_is_compatible(child, "altr,sdram-edac-s10")))
 			of_platform_populate(pdev->dev.of_node,
 					     altr_sdram_ctrl_of_match,
 					     NULL, &pdev->dev);
+#endif
 	}
 
 	return 0;
diff --git a/drivers/edac/aspeed_edac.c b/drivers/edac/aspeed_edac.c
new file mode 100644
index 000000000000..11833c0a5d07
--- /dev/null
+++ b/drivers/edac/aspeed_edac.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018, 2019 Cisco Systems
+ */
+
+#include <linux/edac.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/stop_machine.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include "edac_module.h"
+
+
+#define DRV_NAME "aspeed-edac"
+
+
+#define ASPEED_MCR_PROT        0x00 /* protection key register */
+#define ASPEED_MCR_CONF        0x04 /* configuration register */
+#define ASPEED_MCR_INTR_CTRL   0x50 /* interrupt control/status register */
+#define ASPEED_MCR_ADDR_UNREC  0x58 /* address of first un-recoverable error */
+#define ASPEED_MCR_ADDR_REC    0x5c /* address of last recoverable error */
+#define ASPEED_MCR_LAST        ASPEED_MCR_ADDR_REC
+
+
+#define ASPEED_MCR_PROT_PASSWD	            0xfc600309
+#define ASPEED_MCR_CONF_DRAM_TYPE               BIT(4)
+#define ASPEED_MCR_CONF_ECC                     BIT(7)
+#define ASPEED_MCR_INTR_CTRL_CLEAR             BIT(31)
+#define ASPEED_MCR_INTR_CTRL_CNT_REC   GENMASK(23, 16)
+#define ASPEED_MCR_INTR_CTRL_CNT_UNREC GENMASK(15, 12)
+#define ASPEED_MCR_INTR_CTRL_ENABLE  (BIT(0) | BIT(1))
+
+
+static struct regmap *aspeed_regmap;
+
+
+static int regmap_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	void __iomem *regs = (void __iomem *)context;
+
+	/* enable write to MCR register set */
+	writel(ASPEED_MCR_PROT_PASSWD, regs + ASPEED_MCR_PROT);
+
+	writel(val, regs + reg);
+
+	/* disable write to MCR register set */
+	writel(~ASPEED_MCR_PROT_PASSWD, regs + ASPEED_MCR_PROT);
+
+	return 0;
+}
+
+
+static int regmap_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	void __iomem *regs = (void __iomem *)context;
+
+	*val = readl(regs + reg);
+
+	return 0;
+}
+
+static bool regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ASPEED_MCR_PROT:
+	case ASPEED_MCR_INTR_CTRL:
+	case ASPEED_MCR_ADDR_UNREC:
+	case ASPEED_MCR_ADDR_REC:
+		return true;
+	default:
+		return false;
+	}
+}
+
+
+static const struct regmap_config aspeed_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = ASPEED_MCR_LAST,
+	.reg_write = regmap_reg_write,
+	.reg_read = regmap_reg_read,
+	.volatile_reg = regmap_is_volatile,
+	.fast_io = true,
+};
+
+
+static void count_rec(struct mem_ctl_info *mci, u8 rec_cnt, u32 rec_addr)
+{
+	struct csrow_info *csrow = mci->csrows[0];
+	u32 page, offset, syndrome;
+
+	if (!rec_cnt)
+		return;
+
+	/* report first few errors (if there are) */
+	/* note: no addresses are recorded */
+	if (rec_cnt > 1) {
+		/* page, offset and syndrome are not available */
+		page = 0;
+		offset = 0;
+		syndrome = 0;
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, rec_cnt-1,
+				     page, offset, syndrome, 0, 0, -1,
+				     "address(es) not available", "");
+	}
+
+	/* report last error */
+	/* note: rec_addr is the last recoverable error addr */
+	page = rec_addr >> PAGE_SHIFT;
+	offset = rec_addr & ~PAGE_MASK;
+	/* syndrome is not available */
+	syndrome = 0;
+	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+			     csrow->first_page + page, offset, syndrome,
+			     0, 0, -1, "", "");
+}
+
+
+static void count_un_rec(struct mem_ctl_info *mci, u8 un_rec_cnt,
+			 u32 un_rec_addr)
+{
+	struct csrow_info *csrow = mci->csrows[0];
+	u32 page, offset, syndrome;
+
+	if (!un_rec_cnt)
+		return;
+
+	/* report 1. error */
+	/* note: un_rec_addr is the first unrecoverable error addr */
+	page = un_rec_addr >> PAGE_SHIFT;
+	offset = un_rec_addr & ~PAGE_MASK;
+	/* syndrome is not available */
+	syndrome = 0;
+	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+			     csrow->first_page + page, offset, syndrome,
+			     0, 0, -1, "", "");
+
+	/* report further errors (if there are) */
+	/* note: no addresses are recorded */
+	if (un_rec_cnt > 1) {
+		/* page, offset and syndrome are not available */
+		page = 0;
+		offset = 0;
+		syndrome = 0;
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, un_rec_cnt-1,
+				     page, offset, syndrome, 0, 0, -1,
+				     "address(es) not available", "");
+	}
+}
+
+
+static irqreturn_t mcr_isr(int irq, void *arg)
+{
+	struct mem_ctl_info *mci = arg;
+	u32 rec_addr, un_rec_addr;
+	u32 reg50, reg5c, reg58;
+	u8  rec_cnt, un_rec_cnt;
+
+	regmap_read(aspeed_regmap, ASPEED_MCR_INTR_CTRL, &reg50);
+	dev_dbg(mci->pdev, "received edac interrupt w/ mcr register 50: 0x%x\n",
+		reg50);
+
+	/* collect data about recoverable and unrecoverable errors */
+	rec_cnt = (reg50 & ASPEED_MCR_INTR_CTRL_CNT_REC) >> 16;
+	un_rec_cnt = (reg50 & ASPEED_MCR_INTR_CTRL_CNT_UNREC) >> 12;
+
+	dev_dbg(mci->pdev, "%d recoverable interrupts and %d unrecoverable interrupts\n",
+		rec_cnt, un_rec_cnt);
+
+	regmap_read(aspeed_regmap, ASPEED_MCR_ADDR_UNREC, &reg58);
+	un_rec_addr = reg58;
+
+	regmap_read(aspeed_regmap, ASPEED_MCR_ADDR_REC, &reg5c);
+	rec_addr = reg5c;
+
+	/* clear interrupt flags and error counters: */
+	regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
+			   ASPEED_MCR_INTR_CTRL_CLEAR,
+			   ASPEED_MCR_INTR_CTRL_CLEAR);
+
+	regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
+			   ASPEED_MCR_INTR_CTRL_CLEAR, 0);
+
+	/* process recoverable and unrecoverable errors */
+	count_rec(mci, rec_cnt, rec_addr);
+	count_un_rec(mci, un_rec_cnt, un_rec_addr);
+
+	if (!rec_cnt && !un_rec_cnt)
+		dev_dbg(mci->pdev, "received edac interrupt, but did not find any ECC counters\n");
+
+	regmap_read(aspeed_regmap, ASPEED_MCR_INTR_CTRL, &reg50);
+	dev_dbg(mci->pdev, "edac interrupt handled. mcr reg 50 is now: 0x%x\n",
+		reg50);
+
+	return IRQ_HANDLED;
+}
+
+
+static int config_irq(void *ctx, struct platform_device *pdev)
+{
+	int irq;
+	int rc;
+
+	/* register interrupt handler */
+	irq = platform_get_irq(pdev, 0);
+	dev_dbg(&pdev->dev, "got irq %d\n", irq);
+	if (!irq)
+		return -ENODEV;
+
+	rc = devm_request_irq(&pdev->dev, irq, mcr_isr, IRQF_TRIGGER_HIGH,
+			      DRV_NAME, ctx);
+	if (rc) {
+		dev_err(&pdev->dev, "unable to request irq %d\n", irq);
+		return rc;
+	}
+
+	/* enable interrupts */
+	regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
+			   ASPEED_MCR_INTR_CTRL_ENABLE,
+			   ASPEED_MCR_INTR_CTRL_ENABLE);
+
+	return 0;
+}
+
+
+static int init_csrows(struct mem_ctl_info *mci)
+{
+	struct csrow_info *csrow = mci->csrows[0];
+	u32 nr_pages, dram_type;
+	struct dimm_info *dimm;
+	struct device_node *np;
+	struct resource r;
+	u32 reg04;
+	int rc;
+
+	/* retrieve info about physical memory from device tree */
+	np = of_find_node_by_path("/memory");
+	if (!np) {
+		dev_err(mci->pdev, "dt: missing /memory node\n");
+		return -ENODEV;
+	};
+
+	rc = of_address_to_resource(np, 0, &r);
+
+	of_node_put(np);
+
+	if (rc) {
+		dev_err(mci->pdev, "dt: failed requesting resource for /memory node\n");
+		return rc;
+	};
+
+	dev_dbg(mci->pdev, "dt: /memory node resources: first page r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
+		r.start, resource_size(&r), PAGE_SHIFT);
+
+	csrow->first_page = r.start >> PAGE_SHIFT;
+	nr_pages = resource_size(&r) >> PAGE_SHIFT;
+	csrow->last_page = csrow->first_page + nr_pages - 1;
+
+	regmap_read(aspeed_regmap, ASPEED_MCR_CONF, &reg04);
+	dram_type = (reg04 & ASPEED_MCR_CONF_DRAM_TYPE) ? MEM_DDR4 : MEM_DDR3;
+
+	dimm = csrow->channels[0]->dimm;
+	dimm->mtype = dram_type;
+	dimm->edac_mode = EDAC_SECDED;
+	dimm->nr_pages = nr_pages / csrow->nr_channels;
+
+	dev_dbg(mci->pdev, "initialized dimm with first_page=0x%lx and nr_pages=0x%x\n",
+		csrow->first_page, nr_pages);
+
+	return 0;
+}
+
+
+static int aspeed_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct device_node *np;
+	struct resource *res;
+	void __iomem *regs;
+	u32 reg04;
+	int rc;
+
+	/* setup regmap */
+	np = dev->of_node;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	aspeed_regmap = devm_regmap_init(dev, NULL, (__force void *)regs,
+					 &aspeed_regmap_config);
+	if (IS_ERR(aspeed_regmap))
+		return PTR_ERR(aspeed_regmap);
+
+	/* bail out if ECC mode is not configured */
+	regmap_read(aspeed_regmap, ASPEED_MCR_CONF, &reg04);
+	if (!(reg04 & ASPEED_MCR_CONF_ECC)) {
+		dev_err(&pdev->dev, "ECC mode is not configured in u-boot\n");
+		return -EPERM;
+	}
+
+	edac_op_state = EDAC_OPSTATE_INT;
+
+	/* allocate & init EDAC MC data structure */
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR4;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->scrub_cap = SCRUB_FLAG_HW_SRC;
+	mci->scrub_mode = SCRUB_HW_SRC;
+	mci->mod_name = DRV_NAME;
+	mci->ctl_name = "MIC";
+	mci->dev_name = dev_name(&pdev->dev);
+
+	rc = init_csrows(mci);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to init csrows\n");
+		goto probe_exit02;
+	}
+
+	platform_set_drvdata(pdev, mci);
+
+	/* register with edac core */
+	rc = edac_mc_add_mc(mci);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to register with EDAC core\n");
+		goto probe_exit02;
+	}
+
+	/* register interrupt handler and enable interrupts */
+	rc = config_irq(mci, pdev);
+	if (rc) {
+		dev_err(&pdev->dev, "failed setting up irq\n");
+		goto probe_exit01;
+	}
+
+	return 0;
+
+probe_exit01:
+	edac_mc_del_mc(&pdev->dev);
+probe_exit02:
+	edac_mc_free(mci);
+	return rc;
+}
+
+
+static int aspeed_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	/* disable interrupts */
+	regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
+			   ASPEED_MCR_INTR_CTRL_ENABLE, 0);
+
+	/* free resources */
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (mci)
+		edac_mc_free(mci);
+
+	return 0;
+}
+
+
+static const struct of_device_id aspeed_of_match[] = {
+	{ .compatible = "aspeed,ast2500-sdram-edac" },
+	{},
+};
+
+
+static struct platform_driver aspeed_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+		.of_match_table = aspeed_of_match
+	},
+	.probe		= aspeed_probe,
+	.remove		= aspeed_remove
+};
+
+
+static int __init aspeed_init(void)
+{
+	return platform_driver_register(&aspeed_driver);
+}
+
+
+static void __exit aspeed_exit(void)
+{
+	platform_driver_unregister(&aspeed_driver);
+}
+
+
+module_init(aspeed_init);
+module_exit(aspeed_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stefan Schaeckeler <sschaeck@cisco.com>");
+MODULE_DESCRIPTION("Aspeed AST2500 EDAC driver");
+MODULE_VERSION("1.0");
diff --git a/drivers/edac/debugfs.c b/drivers/edac/debugfs.c
index 92dbb7e2320c..0a9277228c50 100644
--- a/drivers/edac/debugfs.c
+++ b/drivers/edac/debugfs.c
@@ -41,14 +41,9 @@ static const struct file_operations debug_fake_inject_fops = {
 	.llseek = generic_file_llseek,
 };
 
-int __init edac_debugfs_init(void)
+void __init edac_debugfs_init(void)
 {
 	edac_debugfs = debugfs_create_dir("edac", NULL);
-	if (IS_ERR(edac_debugfs)) {
-		edac_debugfs = NULL;
-		return -ENOMEM;
-	}
-	return 0;
 }
 
 void edac_debugfs_exit(void)
@@ -56,50 +51,31 @@ void edac_debugfs_exit(void)
 	debugfs_remove_recursive(edac_debugfs);
 }
 
-int edac_create_debugfs_nodes(struct mem_ctl_info *mci)
+void edac_create_debugfs_nodes(struct mem_ctl_info *mci)
 {
-	struct dentry *d, *parent;
+	struct dentry *parent;
 	char name[80];
 	int i;
 
-	if (!edac_debugfs)
-		return -ENODEV;
-
-	d = debugfs_create_dir(mci->dev.kobj.name, edac_debugfs);
-	if (!d)
-		return -ENOMEM;
-	parent = d;
+	parent = debugfs_create_dir(mci->dev.kobj.name, edac_debugfs);
 
 	for (i = 0; i < mci->n_layers; i++) {
 		sprintf(name, "fake_inject_%s",
 			     edac_layer_name[mci->layers[i].type]);
-		d = debugfs_create_u8(name, S_IRUGO | S_IWUSR, parent,
-				      &mci->fake_inject_layer[i]);
-		if (!d)
-			goto nomem;
+		debugfs_create_u8(name, S_IRUGO | S_IWUSR, parent,
+				  &mci->fake_inject_layer[i]);
 	}
 
-	d = debugfs_create_bool("fake_inject_ue", S_IRUGO | S_IWUSR, parent,
-				&mci->fake_inject_ue);
-	if (!d)
-		goto nomem;
+	debugfs_create_bool("fake_inject_ue", S_IRUGO | S_IWUSR, parent,
+			    &mci->fake_inject_ue);
 
-	d = debugfs_create_u16("fake_inject_count", S_IRUGO | S_IWUSR, parent,
-				&mci->fake_inject_count);
-	if (!d)
-		goto nomem;
+	debugfs_create_u16("fake_inject_count", S_IRUGO | S_IWUSR, parent,
+			   &mci->fake_inject_count);
 
-	d = debugfs_create_file("fake_inject", S_IWUSR, parent,
-				&mci->dev,
-				&debug_fake_inject_fops);
-	if (!d)
-		goto nomem;
+	debugfs_create_file("fake_inject", S_IWUSR, parent, &mci->dev,
+			    &debug_fake_inject_fops);
 
 	mci->debugfs = parent;
-	return 0;
-nomem:
-	edac_debugfs_remove_recursive(mci->debugfs);
-	return -ENOMEM;
 }
 
 /* Create a toplevel dir under EDAC's debugfs hierarchy */
diff --git a/drivers/edac/edac_module.h b/drivers/edac/edac_module.h
index dec88dcea036..dd7d0b509aa3 100644
--- a/drivers/edac/edac_module.h
+++ b/drivers/edac/edac_module.h
@@ -69,9 +69,9 @@ extern void *edac_align_ptr(void **p, unsigned size, int n_elems);
 #define edac_debugfs_remove_recursive debugfs_remove_recursive
 #define edac_debugfs_remove debugfs_remove
 #ifdef CONFIG_EDAC_DEBUG
-int edac_debugfs_init(void);
+void edac_debugfs_init(void);
 void edac_debugfs_exit(void);
-int edac_create_debugfs_nodes(struct mem_ctl_info *mci);
+void edac_create_debugfs_nodes(struct mem_ctl_info *mci);
 struct dentry *edac_debugfs_create_dir(const char *dirname);
 struct dentry *
 edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent);
@@ -83,9 +83,9 @@ edac_debugfs_create_x8(const char *name, umode_t mode, struct dentry *parent, u8
 struct dentry *
 edac_debugfs_create_x16(const char *name, umode_t mode, struct dentry *parent, u16 *value);
 #else
-static inline int edac_debugfs_init(void)					{ return -ENODEV; }
+static inline void edac_debugfs_init(void)					{ }
 static inline void edac_debugfs_exit(void)					{ }
-static inline int edac_create_debugfs_nodes(struct mem_ctl_info *mci)		{ return 0; }
+static inline void edac_create_debugfs_nodes(struct mem_ctl_info *mci)		{ }
 static inline struct dentry *edac_debugfs_create_dir(const char *dirname)	{ return NULL; }
 static inline struct dentry *
 edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent)		{ return NULL; }
diff --git a/drivers/edac/i10nm_base.c b/drivers/edac/i10nm_base.c
new file mode 100644
index 000000000000..c334fb7c63df
--- /dev/null
+++ b/drivers/edac/i10nm_base.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Intel(R) 10nm server memory controller.
+ * Copyright (c) 2019, Intel Corporation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/mce.h>
+#include "edac_module.h"
+#include "skx_common.h"
+
+#define I10NM_REVISION	"v0.0.3"
+#define EDAC_MOD_STR	"i10nm_edac"
+
+/* Debug macros */
+#define i10nm_printk(level, fmt, arg...)	\
+	edac_printk(level, "i10nm", fmt, ##arg)
+
+#define I10NM_GET_SCK_BAR(d, reg)		\
+	pci_read_config_dword((d)->uracu, 0xd0, &(reg))
+#define I10NM_GET_IMC_BAR(d, i, reg)	\
+	pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg))
+#define I10NM_GET_DIMMMTR(m, i, j)	\
+	(*(u32 *)((m)->mbase + 0x2080c + (i) * 0x4000 + (j) * 4))
+#define I10NM_GET_MCDDRTCFG(m, i, j)	\
+	(*(u32 *)((m)->mbase + 0x20970 + (i) * 0x4000 + (j) * 4))
+
+#define I10NM_GET_SCK_MMIO_BASE(reg)	(GET_BITFIELD(reg, 0, 28) << 23)
+#define I10NM_GET_IMC_MMIO_OFFSET(reg)	(GET_BITFIELD(reg, 0, 10) << 12)
+#define I10NM_GET_IMC_MMIO_SIZE(reg)	((GET_BITFIELD(reg, 13, 23) - \
+					 GET_BITFIELD(reg, 0, 10) + 1) << 12)
+
+static struct list_head *i10nm_edac_list;
+
+static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus,
+					   unsigned int dev, unsigned int fun)
+{
+	struct pci_dev *pdev;
+
+	pdev = pci_get_domain_bus_and_slot(dom, bus, PCI_DEVFN(dev, fun));
+	if (!pdev) {
+		edac_dbg(2, "No device %02x:%02x.%x\n",
+			 bus, dev, fun);
+		return NULL;
+	}
+
+	if (unlikely(pci_enable_device(pdev) < 0)) {
+		edac_dbg(2, "Failed to enable device %02x:%02x.%x\n",
+			 bus, dev, fun);
+		return NULL;
+	}
+
+	pci_dev_get(pdev);
+
+	return pdev;
+}
+
+static int i10nm_get_all_munits(void)
+{
+	struct pci_dev *mdev;
+	void __iomem *mbase;
+	unsigned long size;
+	struct skx_dev *d;
+	int i, j = 0;
+	u32 reg, off;
+	u64 base;
+
+	list_for_each_entry(d, i10nm_edac_list, list) {
+		d->util_all = pci_get_dev_wrapper(d->seg, d->bus[1], 29, 1);
+		if (!d->util_all)
+			return -ENODEV;
+
+		d->uracu = pci_get_dev_wrapper(d->seg, d->bus[0], 0, 1);
+		if (!d->uracu)
+			return -ENODEV;
+
+		if (I10NM_GET_SCK_BAR(d, reg)) {
+			i10nm_printk(KERN_ERR, "Failed to socket bar\n");
+			return -ENODEV;
+		}
+
+		base = I10NM_GET_SCK_MMIO_BASE(reg);
+		edac_dbg(2, "socket%d mmio base 0x%llx (reg 0x%x)\n",
+			 j++, base, reg);
+
+		for (i = 0; i < I10NM_NUM_IMC; i++) {
+			mdev = pci_get_dev_wrapper(d->seg, d->bus[0],
+						   12 + i, 0);
+			if (i == 0 && !mdev) {
+				i10nm_printk(KERN_ERR, "No IMC found\n");
+				return -ENODEV;
+			}
+			if (!mdev)
+				continue;
+
+			d->imc[i].mdev = mdev;
+
+			if (I10NM_GET_IMC_BAR(d, i, reg)) {
+				i10nm_printk(KERN_ERR, "Failed to get mc bar\n");
+				return -ENODEV;
+			}
+
+			off  = I10NM_GET_IMC_MMIO_OFFSET(reg);
+			size = I10NM_GET_IMC_MMIO_SIZE(reg);
+			edac_dbg(2, "mc%d mmio base 0x%llx size 0x%lx (reg 0x%x)\n",
+				 i, base + off, size, reg);
+
+			mbase = ioremap(base + off, size);
+			if (!mbase) {
+				i10nm_printk(KERN_ERR, "Failed to ioremap 0x%llx\n",
+					     base + off);
+				return -ENODEV;
+			}
+
+			d->imc[i].mbase = mbase;
+		}
+	}
+
+	return 0;
+}
+
+static const struct x86_cpu_id i10nm_cpuids[] = {
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_TREMONT_X, 0, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids);
+
+static bool i10nm_check_ecc(struct skx_imc *imc, int chan)
+{
+	u32 mcmtr;
+
+	mcmtr = *(u32 *)(imc->mbase + 0x20ef8 + chan * 0x4000);
+	edac_dbg(1, "ch%d mcmtr reg %x\n", chan, mcmtr);
+
+	return !!GET_BITFIELD(mcmtr, 2, 2);
+}
+
+static int i10nm_get_dimm_config(struct mem_ctl_info *mci)
+{
+	struct skx_pvt *pvt = mci->pvt_info;
+	struct skx_imc *imc = pvt->imc;
+	struct dimm_info *dimm;
+	u32 mtr, mcddrtcfg;
+	int i, j, ndimms;
+
+	for (i = 0; i < I10NM_NUM_CHANNELS; i++) {
+		if (!imc->mbase)
+			continue;
+
+		ndimms = 0;
+		for (j = 0; j < I10NM_NUM_DIMMS; j++) {
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+					     mci->n_layers, i, j, 0);
+			mtr = I10NM_GET_DIMMMTR(imc, i, j);
+			mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i, j);
+			edac_dbg(1, "dimmmtr 0x%x mcddrtcfg 0x%x (mc%d ch%d dimm%d)\n",
+				 mtr, mcddrtcfg, imc->mc, i, j);
+
+			if (IS_DIMM_PRESENT(mtr))
+				ndimms += skx_get_dimm_info(mtr, 0, dimm,
+							    imc, i, j);
+			else if (IS_NVDIMM_PRESENT(mcddrtcfg, j))
+				ndimms += skx_get_nvdimm_info(dimm, imc, i, j,
+							      EDAC_MOD_STR);
+		}
+		if (ndimms && !i10nm_check_ecc(imc, 0)) {
+			i10nm_printk(KERN_ERR, "ECC is disabled on imc %d\n",
+				     imc->mc);
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static struct notifier_block i10nm_mce_dec = {
+	.notifier_call	= skx_mce_check_error,
+	.priority	= MCE_PRIO_EDAC,
+};
+
+static int __init i10nm_init(void)
+{
+	u8 mc = 0, src_id = 0, node_id = 0;
+	const struct x86_cpu_id *id;
+	const char *owner;
+	struct skx_dev *d;
+	int rc, i, off[3] = {0xd0, 0xc8, 0xcc};
+	u64 tolm, tohm;
+
+	edac_dbg(2, "\n");
+
+	owner = edac_get_owner();
+	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
+		return -EBUSY;
+
+	id = x86_match_cpu(i10nm_cpuids);
+	if (!id)
+		return -ENODEV;
+
+	rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm);
+	if (rc)
+		return rc;
+
+	rc = skx_get_all_bus_mappings(0x3452, 0xcc, I10NM, &i10nm_edac_list);
+	if (rc < 0)
+		goto fail;
+	if (rc == 0) {
+		i10nm_printk(KERN_ERR, "No memory controllers found\n");
+		return -ENODEV;
+	}
+
+	rc = i10nm_get_all_munits();
+	if (rc < 0)
+		goto fail;
+
+	list_for_each_entry(d, i10nm_edac_list, list) {
+		rc = skx_get_src_id(d, &src_id);
+		if (rc < 0)
+			goto fail;
+
+		rc = skx_get_node_id(d, &node_id);
+		if (rc < 0)
+			goto fail;
+
+		edac_dbg(2, "src_id = %d node_id = %d\n", src_id, node_id);
+		for (i = 0; i < I10NM_NUM_IMC; i++) {
+			if (!d->imc[i].mdev)
+				continue;
+
+			d->imc[i].mc  = mc++;
+			d->imc[i].lmc = i;
+			d->imc[i].src_id  = src_id;
+			d->imc[i].node_id = node_id;
+
+			rc = skx_register_mci(&d->imc[i], d->imc[i].mdev,
+					      "Intel_10nm Socket", EDAC_MOD_STR,
+					      i10nm_get_dimm_config);
+			if (rc < 0)
+				goto fail;
+		}
+	}
+
+	rc = skx_adxl_get();
+	if (rc)
+		goto fail;
+
+	opstate_init();
+	mce_register_decode_chain(&i10nm_mce_dec);
+	setup_skx_debug("i10nm_test");
+
+	i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION);
+
+	return 0;
+fail:
+	skx_remove();
+	return rc;
+}
+
+static void __exit i10nm_exit(void)
+{
+	edac_dbg(2, "\n");
+	teardown_skx_debug();
+	mce_unregister_decode_chain(&i10nm_mce_dec);
+	skx_adxl_put();
+	skx_remove();
+}
+
+module_init(i10nm_init);
+module_exit(i10nm_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MC Driver for Intel 10nm server processors");
diff --git a/drivers/edac/skx_base.c b/drivers/edac/skx_base.c
new file mode 100644
index 000000000000..adae4c848ca1
--- /dev/null
+++ b/drivers/edac/skx_base.c
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * EDAC driver for Intel(R) Xeon(R) Skylake processors
+ * Copyright (c) 2016, Intel Corporation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/processor.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/mce.h>
+
+#include "edac_module.h"
+#include "skx_common.h"
+
+#define EDAC_MOD_STR    "skx_edac"
+
+/*
+ * Debug macros
+ */
+#define skx_printk(level, fmt, arg...)			\
+	edac_printk(level, "skx", fmt, ##arg)
+
+#define skx_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg)
+
+static struct list_head *skx_edac_list;
+
+static u64 skx_tolm, skx_tohm;
+static int skx_num_sockets;
+static unsigned int nvdimm_count;
+
+#define	MASK26	0x3FFFFFF		/* Mask for 2^26 */
+#define MASK29	0x1FFFFFFF		/* Mask for 2^29 */
+
+static struct skx_dev *get_skx_dev(struct pci_bus *bus, u8 idx)
+{
+	struct skx_dev *d;
+
+	list_for_each_entry(d, skx_edac_list, list) {
+		if (d->seg == pci_domain_nr(bus) && d->bus[idx] == bus->number)
+			return d;
+	}
+
+	return NULL;
+}
+
+enum munittype {
+	CHAN0, CHAN1, CHAN2, SAD_ALL, UTIL_ALL, SAD
+};
+
+struct munit {
+	u16	did;
+	u16	devfn[SKX_NUM_IMC];
+	u8	busidx;
+	u8	per_socket;
+	enum munittype mtype;
+};
+
+/*
+ * List of PCI device ids that we need together with some device
+ * number and function numbers to tell which memory controller the
+ * device belongs to.
+ */
+static const struct munit skx_all_munits[] = {
+	{ 0x2054, { }, 1, 1, SAD_ALL },
+	{ 0x2055, { }, 1, 1, UTIL_ALL },
+	{ 0x2040, { PCI_DEVFN(10, 0), PCI_DEVFN(12, 0) }, 2, 2, CHAN0 },
+	{ 0x2044, { PCI_DEVFN(10, 4), PCI_DEVFN(12, 4) }, 2, 2, CHAN1 },
+	{ 0x2048, { PCI_DEVFN(11, 0), PCI_DEVFN(13, 0) }, 2, 2, CHAN2 },
+	{ 0x208e, { }, 1, 0, SAD },
+	{ }
+};
+
+static int get_all_munits(const struct munit *m)
+{
+	struct pci_dev *pdev, *prev;
+	struct skx_dev *d;
+	u32 reg;
+	int i = 0, ndev = 0;
+
+	prev = NULL;
+	for (;;) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, m->did, prev);
+		if (!pdev)
+			break;
+		ndev++;
+		if (m->per_socket == SKX_NUM_IMC) {
+			for (i = 0; i < SKX_NUM_IMC; i++)
+				if (m->devfn[i] == pdev->devfn)
+					break;
+			if (i == SKX_NUM_IMC)
+				goto fail;
+		}
+		d = get_skx_dev(pdev->bus, m->busidx);
+		if (!d)
+			goto fail;
+
+		/* Be sure that the device is enabled */
+		if (unlikely(pci_enable_device(pdev) < 0)) {
+			skx_printk(KERN_ERR, "Couldn't enable device %04x:%04x\n",
+				   PCI_VENDOR_ID_INTEL, m->did);
+			goto fail;
+		}
+
+		switch (m->mtype) {
+		case CHAN0: case CHAN1: case CHAN2:
+			pci_dev_get(pdev);
+			d->imc[i].chan[m->mtype].cdev = pdev;
+			break;
+		case SAD_ALL:
+			pci_dev_get(pdev);
+			d->sad_all = pdev;
+			break;
+		case UTIL_ALL:
+			pci_dev_get(pdev);
+			d->util_all = pdev;
+			break;
+		case SAD:
+			/*
+			 * one of these devices per core, including cores
+			 * that don't exist on this SKU. Ignore any that
+			 * read a route table of zero, make sure all the
+			 * non-zero values match.
+			 */
+			pci_read_config_dword(pdev, 0xB4, &reg);
+			if (reg != 0) {
+				if (d->mcroute == 0) {
+					d->mcroute = reg;
+				} else if (d->mcroute != reg) {
+					skx_printk(KERN_ERR, "mcroute mismatch\n");
+					goto fail;
+				}
+			}
+			ndev--;
+			break;
+		}
+
+		prev = pdev;
+	}
+
+	return ndev;
+fail:
+	pci_dev_put(pdev);
+	return -ENODEV;
+}
+
+static const struct x86_cpu_id skx_cpuids[] = {
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_X, 0, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, skx_cpuids);
+
+#define SKX_GET_MTMTR(dev, reg) \
+	pci_read_config_dword((dev), 0x87c, &(reg))
+
+static bool skx_check_ecc(struct pci_dev *pdev)
+{
+	u32 mtmtr;
+
+	SKX_GET_MTMTR(pdev, mtmtr);
+
+	return !!GET_BITFIELD(mtmtr, 2, 2);
+}
+
+static int skx_get_dimm_config(struct mem_ctl_info *mci)
+{
+	struct skx_pvt *pvt = mci->pvt_info;
+	struct skx_imc *imc = pvt->imc;
+	u32 mtr, amap, mcddrtcfg;
+	struct dimm_info *dimm;
+	int i, j;
+	int ndimms;
+
+	for (i = 0; i < SKX_NUM_CHANNELS; i++) {
+		ndimms = 0;
+		pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap);
+		pci_read_config_dword(imc->chan[i].cdev, 0x400, &mcddrtcfg);
+		for (j = 0; j < SKX_NUM_DIMMS; j++) {
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+					     mci->n_layers, i, j, 0);
+			pci_read_config_dword(imc->chan[i].cdev,
+					      0x80 + 4 * j, &mtr);
+			if (IS_DIMM_PRESENT(mtr)) {
+				ndimms += skx_get_dimm_info(mtr, amap, dimm, imc, i, j);
+			} else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) {
+				ndimms += skx_get_nvdimm_info(dimm, imc, i, j,
+							      EDAC_MOD_STR);
+				nvdimm_count++;
+			}
+		}
+		if (ndimms && !skx_check_ecc(imc->chan[0].cdev)) {
+			skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc);
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+#define	SKX_MAX_SAD 24
+
+#define SKX_GET_SAD(d, i, reg)	\
+	pci_read_config_dword((d)->sad_all, 0x60 + 8 * (i), &(reg))
+#define SKX_GET_ILV(d, i, reg)	\
+	pci_read_config_dword((d)->sad_all, 0x64 + 8 * (i), &(reg))
+
+#define	SKX_SAD_MOD3MODE(sad)	GET_BITFIELD((sad), 30, 31)
+#define	SKX_SAD_MOD3(sad)	GET_BITFIELD((sad), 27, 27)
+#define SKX_SAD_LIMIT(sad)	(((u64)GET_BITFIELD((sad), 7, 26) << 26) | MASK26)
+#define	SKX_SAD_MOD3ASMOD2(sad)	GET_BITFIELD((sad), 5, 6)
+#define	SKX_SAD_ATTR(sad)	GET_BITFIELD((sad), 3, 4)
+#define	SKX_SAD_INTERLEAVE(sad)	GET_BITFIELD((sad), 1, 2)
+#define SKX_SAD_ENABLE(sad)	GET_BITFIELD((sad), 0, 0)
+
+#define SKX_ILV_REMOTE(tgt)	(((tgt) & 8) == 0)
+#define SKX_ILV_TARGET(tgt)	((tgt) & 7)
+
+static bool skx_sad_decode(struct decoded_addr *res)
+{
+	struct skx_dev *d = list_first_entry(skx_edac_list, typeof(*d), list);
+	u64 addr = res->addr;
+	int i, idx, tgt, lchan, shift;
+	u32 sad, ilv;
+	u64 limit, prev_limit;
+	int remote = 0;
+
+	/* Simple sanity check for I/O space or out of range */
+	if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) {
+		edac_dbg(0, "Address 0x%llx out of range\n", addr);
+		return false;
+	}
+
+restart:
+	prev_limit = 0;
+	for (i = 0; i < SKX_MAX_SAD; i++) {
+		SKX_GET_SAD(d, i, sad);
+		limit = SKX_SAD_LIMIT(sad);
+		if (SKX_SAD_ENABLE(sad)) {
+			if (addr >= prev_limit && addr <= limit)
+				goto sad_found;
+		}
+		prev_limit = limit + 1;
+	}
+	edac_dbg(0, "No SAD entry for 0x%llx\n", addr);
+	return false;
+
+sad_found:
+	SKX_GET_ILV(d, i, ilv);
+
+	switch (SKX_SAD_INTERLEAVE(sad)) {
+	case 0:
+		idx = GET_BITFIELD(addr, 6, 8);
+		break;
+	case 1:
+		idx = GET_BITFIELD(addr, 8, 10);
+		break;
+	case 2:
+		idx = GET_BITFIELD(addr, 12, 14);
+		break;
+	case 3:
+		idx = GET_BITFIELD(addr, 30, 32);
+		break;
+	}
+
+	tgt = GET_BITFIELD(ilv, 4 * idx, 4 * idx + 3);
+
+	/* If point to another node, find it and start over */
+	if (SKX_ILV_REMOTE(tgt)) {
+		if (remote) {
+			edac_dbg(0, "Double remote!\n");
+			return false;
+		}
+		remote = 1;
+		list_for_each_entry(d, skx_edac_list, list) {
+			if (d->imc[0].src_id == SKX_ILV_TARGET(tgt))
+				goto restart;
+		}
+		edac_dbg(0, "Can't find node %d\n", SKX_ILV_TARGET(tgt));
+		return false;
+	}
+
+	if (SKX_SAD_MOD3(sad) == 0) {
+		lchan = SKX_ILV_TARGET(tgt);
+	} else {
+		switch (SKX_SAD_MOD3MODE(sad)) {
+		case 0:
+			shift = 6;
+			break;
+		case 1:
+			shift = 8;
+			break;
+		case 2:
+			shift = 12;
+			break;
+		default:
+			edac_dbg(0, "illegal mod3mode\n");
+			return false;
+		}
+		switch (SKX_SAD_MOD3ASMOD2(sad)) {
+		case 0:
+			lchan = (addr >> shift) % 3;
+			break;
+		case 1:
+			lchan = (addr >> shift) % 2;
+			break;
+		case 2:
+			lchan = (addr >> shift) % 2;
+			lchan = (lchan << 1) | !lchan;
+			break;
+		case 3:
+			lchan = ((addr >> shift) % 2) << 1;
+			break;
+		}
+		lchan = (lchan << 1) | (SKX_ILV_TARGET(tgt) & 1);
+	}
+
+	res->dev = d;
+	res->socket = d->imc[0].src_id;
+	res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2);
+	res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19);
+
+	edac_dbg(2, "0x%llx: socket=%d imc=%d channel=%d\n",
+		 res->addr, res->socket, res->imc, res->channel);
+	return true;
+}
+
+#define	SKX_MAX_TAD 8
+
+#define SKX_GET_TADBASE(d, mc, i, reg)			\
+	pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x850 + 4 * (i), &(reg))
+#define SKX_GET_TADWAYNESS(d, mc, i, reg)		\
+	pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x880 + 4 * (i), &(reg))
+#define SKX_GET_TADCHNILVOFFSET(d, mc, ch, i, reg)	\
+	pci_read_config_dword((d)->imc[mc].chan[ch].cdev, 0x90 + 4 * (i), &(reg))
+
+#define	SKX_TAD_BASE(b)		((u64)GET_BITFIELD((b), 12, 31) << 26)
+#define SKX_TAD_SKT_GRAN(b)	GET_BITFIELD((b), 4, 5)
+#define SKX_TAD_CHN_GRAN(b)	GET_BITFIELD((b), 6, 7)
+#define	SKX_TAD_LIMIT(b)	(((u64)GET_BITFIELD((b), 12, 31) << 26) | MASK26)
+#define	SKX_TAD_OFFSET(b)	((u64)GET_BITFIELD((b), 4, 23) << 26)
+#define	SKX_TAD_SKTWAYS(b)	(1 << GET_BITFIELD((b), 10, 11))
+#define	SKX_TAD_CHNWAYS(b)	(GET_BITFIELD((b), 8, 9) + 1)
+
+/* which bit used for both socket and channel interleave */
+static int skx_granularity[] = { 6, 8, 12, 30 };
+
+static u64 skx_do_interleave(u64 addr, int shift, int ways, u64 lowbits)
+{
+	addr >>= shift;
+	addr /= ways;
+	addr <<= shift;
+
+	return addr | (lowbits & ((1ull << shift) - 1));
+}
+
+static bool skx_tad_decode(struct decoded_addr *res)
+{
+	int i;
+	u32 base, wayness, chnilvoffset;
+	int skt_interleave_bit, chn_interleave_bit;
+	u64 channel_addr;
+
+	for (i = 0; i < SKX_MAX_TAD; i++) {
+		SKX_GET_TADBASE(res->dev, res->imc, i, base);
+		SKX_GET_TADWAYNESS(res->dev, res->imc, i, wayness);
+		if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness))
+			goto tad_found;
+	}
+	edac_dbg(0, "No TAD entry for 0x%llx\n", res->addr);
+	return false;
+
+tad_found:
+	res->sktways = SKX_TAD_SKTWAYS(wayness);
+	res->chanways = SKX_TAD_CHNWAYS(wayness);
+	skt_interleave_bit = skx_granularity[SKX_TAD_SKT_GRAN(base)];
+	chn_interleave_bit = skx_granularity[SKX_TAD_CHN_GRAN(base)];
+
+	SKX_GET_TADCHNILVOFFSET(res->dev, res->imc, res->channel, i, chnilvoffset);
+	channel_addr = res->addr - SKX_TAD_OFFSET(chnilvoffset);
+
+	if (res->chanways == 3 && skt_interleave_bit > chn_interleave_bit) {
+		/* Must handle channel first, then socket */
+		channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
+						 res->chanways, channel_addr);
+		channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
+						 res->sktways, channel_addr);
+	} else {
+		/* Handle socket then channel. Preserve low bits from original address */
+		channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
+						 res->sktways, res->addr);
+		channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
+						 res->chanways, res->addr);
+	}
+
+	res->chan_addr = channel_addr;
+
+	edac_dbg(2, "0x%llx: chan_addr=0x%llx sktways=%d chanways=%d\n",
+		 res->addr, res->chan_addr, res->sktways, res->chanways);
+	return true;
+}
+
+#define SKX_MAX_RIR 4
+
+#define SKX_GET_RIRWAYNESS(d, mc, ch, i, reg)		\
+	pci_read_config_dword((d)->imc[mc].chan[ch].cdev,	\
+			      0x108 + 4 * (i), &(reg))
+#define SKX_GET_RIRILV(d, mc, ch, idx, i, reg)		\
+	pci_read_config_dword((d)->imc[mc].chan[ch].cdev,	\
+			      0x120 + 16 * (idx) + 4 * (i), &(reg))
+
+#define	SKX_RIR_VALID(b) GET_BITFIELD((b), 31, 31)
+#define	SKX_RIR_LIMIT(b) (((u64)GET_BITFIELD((b), 1, 11) << 29) | MASK29)
+#define	SKX_RIR_WAYS(b) (1 << GET_BITFIELD((b), 28, 29))
+#define	SKX_RIR_CHAN_RANK(b) GET_BITFIELD((b), 16, 19)
+#define	SKX_RIR_OFFSET(b) ((u64)(GET_BITFIELD((b), 2, 15) << 26))
+
+static bool skx_rir_decode(struct decoded_addr *res)
+{
+	int i, idx, chan_rank;
+	int shift;
+	u32 rirway, rirlv;
+	u64 rank_addr, prev_limit = 0, limit;
+
+	if (res->dev->imc[res->imc].chan[res->channel].dimms[0].close_pg)
+		shift = 6;
+	else
+		shift = 13;
+
+	for (i = 0; i < SKX_MAX_RIR; i++) {
+		SKX_GET_RIRWAYNESS(res->dev, res->imc, res->channel, i, rirway);
+		limit = SKX_RIR_LIMIT(rirway);
+		if (SKX_RIR_VALID(rirway)) {
+			if (prev_limit <= res->chan_addr &&
+			    res->chan_addr <= limit)
+				goto rir_found;
+		}
+		prev_limit = limit;
+	}
+	edac_dbg(0, "No RIR entry for 0x%llx\n", res->addr);
+	return false;
+
+rir_found:
+	rank_addr = res->chan_addr >> shift;
+	rank_addr /= SKX_RIR_WAYS(rirway);
+	rank_addr <<= shift;
+	rank_addr |= res->chan_addr & GENMASK_ULL(shift - 1, 0);
+
+	res->rank_address = rank_addr;
+	idx = (res->chan_addr >> shift) % SKX_RIR_WAYS(rirway);
+
+	SKX_GET_RIRILV(res->dev, res->imc, res->channel, idx, i, rirlv);
+	res->rank_address = rank_addr - SKX_RIR_OFFSET(rirlv);
+	chan_rank = SKX_RIR_CHAN_RANK(rirlv);
+	res->channel_rank = chan_rank;
+	res->dimm = chan_rank / 4;
+	res->rank = chan_rank % 4;
+
+	edac_dbg(2, "0x%llx: dimm=%d rank=%d chan_rank=%d rank_addr=0x%llx\n",
+		 res->addr, res->dimm, res->rank,
+		 res->channel_rank, res->rank_address);
+	return true;
+}
+
+static u8 skx_close_row[] = {
+	15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33
+};
+
+static u8 skx_close_column[] = {
+	3, 4, 5, 14, 19, 23, 24, 25, 26, 27
+};
+
+static u8 skx_open_row[] = {
+	14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33
+};
+
+static u8 skx_open_column[] = {
+	3, 4, 5, 6, 7, 8, 9, 10, 11, 12
+};
+
+static u8 skx_open_fine_column[] = {
+	3, 4, 5, 7, 8, 9, 10, 11, 12, 13
+};
+
+static int skx_bits(u64 addr, int nbits, u8 *bits)
+{
+	int i, res = 0;
+
+	for (i = 0; i < nbits; i++)
+		res |= ((addr >> bits[i]) & 1) << i;
+	return res;
+}
+
+static int skx_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1)
+{
+	int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1);
+
+	if (do_xor)
+		ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1);
+
+	return ret;
+}
+
+static bool skx_mad_decode(struct decoded_addr *r)
+{
+	struct skx_dimm *dimm = &r->dev->imc[r->imc].chan[r->channel].dimms[r->dimm];
+	int bg0 = dimm->fine_grain_bank ? 6 : 13;
+
+	if (dimm->close_pg) {
+		r->row = skx_bits(r->rank_address, dimm->rowbits, skx_close_row);
+		r->column = skx_bits(r->rank_address, dimm->colbits, skx_close_column);
+		r->column |= 0x400; /* C10 is autoprecharge, always set */
+		r->bank_address = skx_bank_bits(r->rank_address, 8, 9, dimm->bank_xor_enable, 22, 28);
+		r->bank_group = skx_bank_bits(r->rank_address, 6, 7, dimm->bank_xor_enable, 20, 21);
+	} else {
+		r->row = skx_bits(r->rank_address, dimm->rowbits, skx_open_row);
+		if (dimm->fine_grain_bank)
+			r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_fine_column);
+		else
+			r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_column);
+		r->bank_address = skx_bank_bits(r->rank_address, 18, 19, dimm->bank_xor_enable, 22, 23);
+		r->bank_group = skx_bank_bits(r->rank_address, bg0, 17, dimm->bank_xor_enable, 20, 21);
+	}
+	r->row &= (1u << dimm->rowbits) - 1;
+
+	edac_dbg(2, "0x%llx: row=0x%x col=0x%x bank_addr=%d bank_group=%d\n",
+		 r->addr, r->row, r->column, r->bank_address,
+		 r->bank_group);
+	return true;
+}
+
+static bool skx_decode(struct decoded_addr *res)
+{
+	return skx_sad_decode(res) && skx_tad_decode(res) &&
+		skx_rir_decode(res) && skx_mad_decode(res);
+}
+
+static struct notifier_block skx_mce_dec = {
+	.notifier_call	= skx_mce_check_error,
+	.priority	= MCE_PRIO_EDAC,
+};
+
+/*
+ * skx_init:
+ *	make sure we are running on the correct cpu model
+ *	search for all the devices we need
+ *	check which DIMMs are present.
+ */
+static int __init skx_init(void)
+{
+	const struct x86_cpu_id *id;
+	const struct munit *m;
+	const char *owner;
+	int rc = 0, i, off[3] = {0xd0, 0xd4, 0xd8};
+	u8 mc = 0, src_id, node_id;
+	struct skx_dev *d;
+
+	edac_dbg(2, "\n");
+
+	owner = edac_get_owner();
+	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
+		return -EBUSY;
+
+	id = x86_match_cpu(skx_cpuids);
+	if (!id)
+		return -ENODEV;
+
+	rc = skx_get_hi_lo(0x2034, off, &skx_tolm, &skx_tohm);
+	if (rc)
+		return rc;
+
+	rc = skx_get_all_bus_mappings(0x2016, 0xcc, SKX, &skx_edac_list);
+	if (rc < 0)
+		goto fail;
+	if (rc == 0) {
+		edac_dbg(2, "No memory controllers found\n");
+		return -ENODEV;
+	}
+	skx_num_sockets = rc;
+
+	for (m = skx_all_munits; m->did; m++) {
+		rc = get_all_munits(m);
+		if (rc < 0)
+			goto fail;
+		if (rc != m->per_socket * skx_num_sockets) {
+			edac_dbg(2, "Expected %d, got %d of 0x%x\n",
+				 m->per_socket * skx_num_sockets, rc, m->did);
+			rc = -ENODEV;
+			goto fail;
+		}
+	}
+
+	list_for_each_entry(d, skx_edac_list, list) {
+		rc = skx_get_src_id(d, &src_id);
+		if (rc < 0)
+			goto fail;
+		rc = skx_get_node_id(d, &node_id);
+		if (rc < 0)
+			goto fail;
+		edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id);
+		for (i = 0; i < SKX_NUM_IMC; i++) {
+			d->imc[i].mc = mc++;
+			d->imc[i].lmc = i;
+			d->imc[i].src_id = src_id;
+			d->imc[i].node_id = node_id;
+			rc = skx_register_mci(&d->imc[i], d->imc[i].chan[0].cdev,
+					      "Skylake Socket", EDAC_MOD_STR,
+					      skx_get_dimm_config);
+			if (rc < 0)
+				goto fail;
+		}
+	}
+
+	skx_set_decode(skx_decode);
+
+	if (nvdimm_count && skx_adxl_get() == -ENODEV)
+		skx_printk(KERN_NOTICE, "Only decoding DDR4 address!\n");
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	setup_skx_debug("skx_test");
+
+	mce_register_decode_chain(&skx_mce_dec);
+
+	return 0;
+fail:
+	skx_remove();
+	return rc;
+}
+
+static void __exit skx_exit(void)
+{
+	edac_dbg(2, "\n");
+	mce_unregister_decode_chain(&skx_mce_dec);
+	teardown_skx_debug();
+	if (nvdimm_count)
+		skx_adxl_put();
+	skx_remove();
+}
+
+module_init(skx_init);
+module_exit(skx_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tony Luck");
+MODULE_DESCRIPTION("MC Driver for Intel Skylake server processors");
diff --git a/drivers/edac/skx_common.c b/drivers/edac/skx_common.c
new file mode 100644
index 000000000000..0e96e7b5b0a7
--- /dev/null
+++ b/drivers/edac/skx_common.c
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common codes for both the skx_edac driver and Intel 10nm server EDAC driver.
+ * Originally split out from the skx_edac driver.
+ *
+ * Copyright (c) 2018, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/adxl.h>
+#include <acpi/nfit.h>
+#include <asm/mce.h>
+#include "edac_module.h"
+#include "skx_common.h"
+
+static const char * const component_names[] = {
+	[INDEX_SOCKET]	= "ProcessorSocketId",
+	[INDEX_MEMCTRL]	= "MemoryControllerId",
+	[INDEX_CHANNEL]	= "ChannelId",
+	[INDEX_DIMM]	= "DimmSlotId",
+};
+
+static int component_indices[ARRAY_SIZE(component_names)];
+static int adxl_component_count;
+static const char * const *adxl_component_names;
+static u64 *adxl_values;
+static char *adxl_msg;
+
+static char skx_msg[MSG_SIZE];
+static skx_decode_f skx_decode;
+static u64 skx_tolm, skx_tohm;
+static LIST_HEAD(dev_edac_list);
+
+int __init skx_adxl_get(void)
+{
+	const char * const *names;
+	int i, j;
+
+	names = adxl_get_component_names();
+	if (!names) {
+		skx_printk(KERN_NOTICE, "No firmware support for address translation.\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < INDEX_MAX; i++) {
+		for (j = 0; names[j]; j++) {
+			if (!strcmp(component_names[i], names[j])) {
+				component_indices[i] = j;
+				break;
+			}
+		}
+
+		if (!names[j])
+			goto err;
+	}
+
+	adxl_component_names = names;
+	while (*names++)
+		adxl_component_count++;
+
+	adxl_values = kcalloc(adxl_component_count, sizeof(*adxl_values),
+			      GFP_KERNEL);
+	if (!adxl_values) {
+		adxl_component_count = 0;
+		return -ENOMEM;
+	}
+
+	adxl_msg = kzalloc(MSG_SIZE, GFP_KERNEL);
+	if (!adxl_msg) {
+		adxl_component_count = 0;
+		kfree(adxl_values);
+		return -ENOMEM;
+	}
+
+	return 0;
+err:
+	skx_printk(KERN_ERR, "'%s' is not matched from DSM parameters: ",
+		   component_names[i]);
+	for (j = 0; names[j]; j++)
+		skx_printk(KERN_CONT, "%s ", names[j]);
+	skx_printk(KERN_CONT, "\n");
+
+	return -ENODEV;
+}
+
+void __exit skx_adxl_put(void)
+{
+	kfree(adxl_values);
+	kfree(adxl_msg);
+}
+
+static bool skx_adxl_decode(struct decoded_addr *res)
+{
+	int i, len = 0;
+
+	if (res->addr >= skx_tohm || (res->addr >= skx_tolm &&
+				      res->addr < BIT_ULL(32))) {
+		edac_dbg(0, "Address 0x%llx out of range\n", res->addr);
+		return false;
+	}
+
+	if (adxl_decode(res->addr, adxl_values)) {
+		edac_dbg(0, "Failed to decode 0x%llx\n", res->addr);
+		return false;
+	}
+
+	res->socket  = (int)adxl_values[component_indices[INDEX_SOCKET]];
+	res->imc     = (int)adxl_values[component_indices[INDEX_MEMCTRL]];
+	res->channel = (int)adxl_values[component_indices[INDEX_CHANNEL]];
+	res->dimm    = (int)adxl_values[component_indices[INDEX_DIMM]];
+
+	for (i = 0; i < adxl_component_count; i++) {
+		if (adxl_values[i] == ~0x0ull)
+			continue;
+
+		len += snprintf(adxl_msg + len, MSG_SIZE - len, " %s:0x%llx",
+				adxl_component_names[i], adxl_values[i]);
+		if (MSG_SIZE - len <= 0)
+			break;
+	}
+
+	return true;
+}
+
+void skx_set_decode(skx_decode_f decode)
+{
+	skx_decode = decode;
+}
+
+int skx_get_src_id(struct skx_dev *d, u8 *id)
+{
+	u32 reg;
+
+	if (pci_read_config_dword(d->util_all, 0xf0, &reg)) {
+		skx_printk(KERN_ERR, "Failed to read src id\n");
+		return -ENODEV;
+	}
+
+	*id = GET_BITFIELD(reg, 12, 14);
+	return 0;
+}
+
+int skx_get_node_id(struct skx_dev *d, u8 *id)
+{
+	u32 reg;
+
+	if (pci_read_config_dword(d->util_all, 0xf4, &reg)) {
+		skx_printk(KERN_ERR, "Failed to read node id\n");
+		return -ENODEV;
+	}
+
+	*id = GET_BITFIELD(reg, 0, 2);
+	return 0;
+}
+
+static int get_width(u32 mtr)
+{
+	switch (GET_BITFIELD(mtr, 8, 9)) {
+	case 0:
+		return DEV_X4;
+	case 1:
+		return DEV_X8;
+	case 2:
+		return DEV_X16;
+	}
+	return DEV_UNKNOWN;
+}
+
+/*
+ * We use the per-socket device @did to count how many sockets are present,
+ * and to detemine which PCI buses are associated with each socket. Allocate
+ * and build the full list of all the skx_dev structures that we need here.
+ */
+int skx_get_all_bus_mappings(unsigned int did, int off, enum type type,
+			     struct list_head **list)
+{
+	struct pci_dev *pdev, *prev;
+	struct skx_dev *d;
+	u32 reg;
+	int ndev = 0;
+
+	prev = NULL;
+	for (;;) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, did, prev);
+		if (!pdev)
+			break;
+		ndev++;
+		d = kzalloc(sizeof(*d), GFP_KERNEL);
+		if (!d) {
+			pci_dev_put(pdev);
+			return -ENOMEM;
+		}
+
+		if (pci_read_config_dword(pdev, off, &reg)) {
+			kfree(d);
+			pci_dev_put(pdev);
+			skx_printk(KERN_ERR, "Failed to read bus idx\n");
+			return -ENODEV;
+		}
+
+		d->bus[0] = GET_BITFIELD(reg, 0, 7);
+		d->bus[1] = GET_BITFIELD(reg, 8, 15);
+		if (type == SKX) {
+			d->seg = pci_domain_nr(pdev->bus);
+			d->bus[2] = GET_BITFIELD(reg, 16, 23);
+			d->bus[3] = GET_BITFIELD(reg, 24, 31);
+		} else {
+			d->seg = GET_BITFIELD(reg, 16, 23);
+		}
+
+		edac_dbg(2, "busses: 0x%x, 0x%x, 0x%x, 0x%x\n",
+			 d->bus[0], d->bus[1], d->bus[2], d->bus[3]);
+		list_add_tail(&d->list, &dev_edac_list);
+		prev = pdev;
+	}
+
+	if (list)
+		*list = &dev_edac_list;
+	return ndev;
+}
+
+int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm)
+{
+	struct pci_dev *pdev;
+	u32 reg;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, did, NULL);
+	if (!pdev) {
+		skx_printk(KERN_ERR, "Can't get tolm/tohm\n");
+		return -ENODEV;
+	}
+
+	if (pci_read_config_dword(pdev, off[0], &reg)) {
+		skx_printk(KERN_ERR, "Failed to read tolm\n");
+		goto fail;
+	}
+	skx_tolm = reg;
+
+	if (pci_read_config_dword(pdev, off[1], &reg)) {
+		skx_printk(KERN_ERR, "Failed to read lower tohm\n");
+		goto fail;
+	}
+	skx_tohm = reg;
+
+	if (pci_read_config_dword(pdev, off[2], &reg)) {
+		skx_printk(KERN_ERR, "Failed to read upper tohm\n");
+		goto fail;
+	}
+	skx_tohm |= (u64)reg << 32;
+
+	pci_dev_put(pdev);
+	*tolm = skx_tolm;
+	*tohm = skx_tohm;
+	edac_dbg(2, "tolm = 0x%llx tohm = 0x%llx\n", skx_tolm, skx_tohm);
+	return 0;
+fail:
+	pci_dev_put(pdev);
+	return -ENODEV;
+}
+
+static int skx_get_dimm_attr(u32 reg, int lobit, int hibit, int add,
+			     int minval, int maxval, const char *name)
+{
+	u32 val = GET_BITFIELD(reg, lobit, hibit);
+
+	if (val < minval || val > maxval) {
+		edac_dbg(2, "bad %s = %d (raw=0x%x)\n", name, val, reg);
+		return -EINVAL;
+	}
+	return val + add;
+}
+
+#define numrank(reg)	skx_get_dimm_attr(reg, 12, 13, 0, 0, 2, "ranks")
+#define numrow(reg)	skx_get_dimm_attr(reg, 2, 4, 12, 1, 6, "rows")
+#define numcol(reg)	skx_get_dimm_attr(reg, 0, 1, 10, 0, 2, "cols")
+
+int skx_get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
+		      struct skx_imc *imc, int chan, int dimmno)
+{
+	int  banks = 16, ranks, rows, cols, npages;
+	u64 size;
+
+	ranks = numrank(mtr);
+	rows = numrow(mtr);
+	cols = numcol(mtr);
+
+	/*
+	 * Compute size in 8-byte (2^3) words, then shift to MiB (2^20)
+	 */
+	size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3);
+	npages = MiB_TO_PAGES(size);
+
+	edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: 0x%x, col: 0x%x\n",
+		 imc->mc, chan, dimmno, size, npages,
+		 banks, 1 << ranks, rows, cols);
+
+	imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mtr, 0, 0);
+	imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mtr, 9, 9);
+	imc->chan[chan].dimms[dimmno].fine_grain_bank = GET_BITFIELD(amap, 0, 0);
+	imc->chan[chan].dimms[dimmno].rowbits = rows;
+	imc->chan[chan].dimms[dimmno].colbits = cols;
+
+	dimm->nr_pages = npages;
+	dimm->grain = 32;
+	dimm->dtype = get_width(mtr);
+	dimm->mtype = MEM_DDR4;
+	dimm->edac_mode = EDAC_SECDED; /* likely better than this */
+	snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
+		 imc->src_id, imc->lmc, chan, dimmno);
+
+	return 1;
+}
+
+int skx_get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
+			int chan, int dimmno, const char *mod_str)
+{
+	int smbios_handle;
+	u32 dev_handle;
+	u16 flags;
+	u64 size = 0;
+
+	dev_handle = ACPI_NFIT_BUILD_DEVICE_HANDLE(dimmno, chan, imc->lmc,
+						   imc->src_id, 0);
+
+	smbios_handle = nfit_get_smbios_id(dev_handle, &flags);
+	if (smbios_handle == -EOPNOTSUPP) {
+		pr_warn_once("%s: Can't find size of NVDIMM. Try enabling CONFIG_ACPI_NFIT\n", mod_str);
+		goto unknown_size;
+	}
+
+	if (smbios_handle < 0) {
+		skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=0x%x\n", dev_handle);
+		goto unknown_size;
+	}
+
+	if (flags & ACPI_NFIT_MEM_MAP_FAILED) {
+		skx_printk(KERN_ERR, "NVDIMM ADR=0x%x is not mapped\n", dev_handle);
+		goto unknown_size;
+	}
+
+	size = dmi_memdev_size(smbios_handle);
+	if (size == ~0ull)
+		skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=0x%x/SMBIOS=0x%x\n",
+			   dev_handle, smbios_handle);
+
+unknown_size:
+	dimm->nr_pages = size >> PAGE_SHIFT;
+	dimm->grain = 32;
+	dimm->dtype = DEV_UNKNOWN;
+	dimm->mtype = MEM_NVDIMM;
+	dimm->edac_mode = EDAC_SECDED; /* likely better than this */
+
+	edac_dbg(0, "mc#%d: channel %d, dimm %d, %llu MiB (%u pages)\n",
+		 imc->mc, chan, dimmno, size >> 20, dimm->nr_pages);
+
+	snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
+		 imc->src_id, imc->lmc, chan, dimmno);
+
+	return (size == 0 || size == ~0ull) ? 0 : 1;
+}
+
+int skx_register_mci(struct skx_imc *imc, struct pci_dev *pdev,
+		     const char *ctl_name, const char *mod_str,
+		     get_dimm_config_f get_dimm_config)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct skx_pvt *pvt;
+	int rc;
+
+	/* Allocate a new MC control structure */
+	layers[0].type = EDAC_MC_LAYER_CHANNEL;
+	layers[0].size = NUM_CHANNELS;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_SLOT;
+	layers[1].size = NUM_DIMMS;
+	layers[1].is_virt_csrow = true;
+	mci = edac_mc_alloc(imc->mc, ARRAY_SIZE(layers), layers,
+			    sizeof(struct skx_pvt));
+
+	if (unlikely(!mci))
+		return -ENOMEM;
+
+	edac_dbg(0, "MC#%d: mci = %p\n", imc->mc, mci);
+
+	/* Associate skx_dev and mci for future usage */
+	imc->mci = mci;
+	pvt = mci->pvt_info;
+	pvt->imc = imc;
+
+	mci->ctl_name = kasprintf(GFP_KERNEL, "%s#%d IMC#%d", ctl_name,
+				  imc->node_id, imc->lmc);
+	if (!mci->ctl_name) {
+		rc = -ENOMEM;
+		goto fail0;
+	}
+
+	mci->mtype_cap = MEM_FLAG_DDR4 | MEM_FLAG_NVDIMM;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = mod_str;
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = NULL;
+
+	rc = get_dimm_config(mci);
+	if (rc < 0)
+		goto fail;
+
+	/* Record ptr to the generic device */
+	mci->pdev = &pdev->dev;
+
+	/* Add this new MC control structure to EDAC's list of MCs */
+	if (unlikely(edac_mc_add_mc(mci))) {
+		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+		rc = -EINVAL;
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	kfree(mci->ctl_name);
+fail0:
+	edac_mc_free(mci);
+	imc->mci = NULL;
+	return rc;
+}
+
+static void skx_unregister_mci(struct skx_imc *imc)
+{
+	struct mem_ctl_info *mci = imc->mci;
+
+	if (!mci)
+		return;
+
+	edac_dbg(0, "MC%d: mci = %p\n", imc->mc, mci);
+
+	/* Remove MC sysfs nodes */
+	edac_mc_del_mc(mci->pdev);
+
+	edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
+	kfree(mci->ctl_name);
+	edac_mc_free(mci);
+}
+
+static struct mem_ctl_info *get_mci(int src_id, int lmc)
+{
+	struct skx_dev *d;
+
+	if (lmc > NUM_IMC - 1) {
+		skx_printk(KERN_ERR, "Bad lmc %d\n", lmc);
+		return NULL;
+	}
+
+	list_for_each_entry(d, &dev_edac_list, list) {
+		if (d->imc[0].src_id == src_id)
+			return d->imc[lmc].mci;
+	}
+
+	skx_printk(KERN_ERR, "No mci for src_id %d lmc %d\n", src_id, lmc);
+	return NULL;
+}
+
+static void skx_mce_output_error(struct mem_ctl_info *mci,
+				 const struct mce *m,
+				 struct decoded_addr *res)
+{
+	enum hw_event_mc_err_type tp_event;
+	char *type, *optype;
+	bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
+	bool overflow = GET_BITFIELD(m->status, 62, 62);
+	bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
+	bool recoverable;
+	u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
+	u32 mscod = GET_BITFIELD(m->status, 16, 31);
+	u32 errcode = GET_BITFIELD(m->status, 0, 15);
+	u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+
+	recoverable = GET_BITFIELD(m->status, 56, 56);
+
+	if (uncorrected_error) {
+		core_err_cnt = 1;
+		if (ripv) {
+			type = "FATAL";
+			tp_event = HW_EVENT_ERR_FATAL;
+		} else {
+			type = "NON_FATAL";
+			tp_event = HW_EVENT_ERR_UNCORRECTED;
+		}
+	} else {
+		type = "CORRECTED";
+		tp_event = HW_EVENT_ERR_CORRECTED;
+	}
+
+	/*
+	 * According to Intel Architecture spec vol 3B,
+	 * Table 15-10 "IA32_MCi_Status [15:0] Compound Error Code Encoding"
+	 * memory errors should fit one of these masks:
+	 *	000f 0000 1mmm cccc (binary)
+	 *	000f 0010 1mmm cccc (binary)	[RAM used as cache]
+	 * where:
+	 *	f = Correction Report Filtering Bit. If 1, subsequent errors
+	 *	    won't be shown
+	 *	mmm = error type
+	 *	cccc = channel
+	 * If the mask doesn't match, report an error to the parsing logic
+	 */
+	if (!((errcode & 0xef80) == 0x80 || (errcode & 0xef80) == 0x280)) {
+		optype = "Can't parse: it is not a mem";
+	} else {
+		switch (optypenum) {
+		case 0:
+			optype = "generic undef request error";
+			break;
+		case 1:
+			optype = "memory read error";
+			break;
+		case 2:
+			optype = "memory write error";
+			break;
+		case 3:
+			optype = "addr/cmd error";
+			break;
+		case 4:
+			optype = "memory scrubbing error";
+			break;
+		default:
+			optype = "reserved";
+			break;
+		}
+	}
+	if (adxl_component_count) {
+		snprintf(skx_msg, MSG_SIZE, "%s%s err_code:0x%04x:0x%04x %s",
+			 overflow ? " OVERFLOW" : "",
+			 (uncorrected_error && recoverable) ? " recoverable" : "",
+			 mscod, errcode, adxl_msg);
+	} else {
+		snprintf(skx_msg, MSG_SIZE,
+			 "%s%s err_code:0x%04x:0x%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:0x%x col:0x%x",
+			 overflow ? " OVERFLOW" : "",
+			 (uncorrected_error && recoverable) ? " recoverable" : "",
+			 mscod, errcode,
+			 res->socket, res->imc, res->rank,
+			 res->bank_group, res->bank_address, res->row, res->column);
+	}
+
+	edac_dbg(0, "%s\n", skx_msg);
+
+	/* Call the helper to output message */
+	edac_mc_handle_error(tp_event, mci, core_err_cnt,
+			     m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0,
+			     res->channel, res->dimm, -1,
+			     optype, skx_msg);
+}
+
+int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
+			void *data)
+{
+	struct mce *mce = (struct mce *)data;
+	struct decoded_addr res;
+	struct mem_ctl_info *mci;
+	char *type;
+
+	if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
+		return NOTIFY_DONE;
+
+	/* ignore unless this is memory related with an address */
+	if ((mce->status & 0xefff) >> 7 != 1 || !(mce->status & MCI_STATUS_ADDRV))
+		return NOTIFY_DONE;
+
+	memset(&res, 0, sizeof(res));
+	res.addr = mce->addr;
+
+	if (adxl_component_count) {
+		if (!skx_adxl_decode(&res))
+			return NOTIFY_DONE;
+
+		mci = get_mci(res.socket, res.imc);
+	} else {
+		if (!skx_decode || !skx_decode(&res))
+			return NOTIFY_DONE;
+
+		mci = res.dev->imc[res.imc].mci;
+	}
+
+	if (!mci)
+		return NOTIFY_DONE;
+
+	if (mce->mcgstatus & MCG_STATUS_MCIP)
+		type = "Exception";
+	else
+		type = "Event";
+
+	skx_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n");
+
+	skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: 0x%llx "
+			   "Bank %d: 0x%llx\n", mce->extcpu, type,
+			   mce->mcgstatus, mce->bank, mce->status);
+	skx_mc_printk(mci, KERN_DEBUG, "TSC 0x%llx ", mce->tsc);
+	skx_mc_printk(mci, KERN_DEBUG, "ADDR 0x%llx ", mce->addr);
+	skx_mc_printk(mci, KERN_DEBUG, "MISC 0x%llx ", mce->misc);
+
+	skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:0x%x TIME %llu SOCKET "
+			   "%u APIC 0x%x\n", mce->cpuvendor, mce->cpuid,
+			   mce->time, mce->socketid, mce->apicid);
+
+	skx_mce_output_error(mci, mce, &res);
+
+	return NOTIFY_DONE;
+}
+
+void skx_remove(void)
+{
+	int i, j;
+	struct skx_dev *d, *tmp;
+
+	edac_dbg(0, "\n");
+
+	list_for_each_entry_safe(d, tmp, &dev_edac_list, list) {
+		list_del(&d->list);
+		for (i = 0; i < NUM_IMC; i++) {
+			if (d->imc[i].mci)
+				skx_unregister_mci(&d->imc[i]);
+
+			if (d->imc[i].mdev)
+				pci_dev_put(d->imc[i].mdev);
+
+			if (d->imc[i].mbase)
+				iounmap(d->imc[i].mbase);
+
+			for (j = 0; j < NUM_CHANNELS; j++) {
+				if (d->imc[i].chan[j].cdev)
+					pci_dev_put(d->imc[i].chan[j].cdev);
+			}
+		}
+		if (d->util_all)
+			pci_dev_put(d->util_all);
+		if (d->sad_all)
+			pci_dev_put(d->sad_all);
+		if (d->uracu)
+			pci_dev_put(d->uracu);
+
+		kfree(d);
+	}
+}
+
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Debug feature.
+ * Exercise the address decode logic by writing an address to
+ * /sys/kernel/debug/edac/dirname/addr.
+ */
+static struct dentry *skx_test;
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+	struct mce m;
+
+	pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
+
+	memset(&m, 0, sizeof(m));
+	/* ADDRV + MemRd + Unknown channel */
+	m.status = MCI_STATUS_ADDRV + 0x90;
+	/* One corrected error */
+	m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT);
+	m.addr = val;
+	skx_mce_check_error(NULL, 0, &m);
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+void setup_skx_debug(const char *dirname)
+{
+	skx_test = edac_debugfs_create_dir(dirname);
+	if (!skx_test)
+		return;
+
+	if (!edac_debugfs_create_file("addr", 0200, skx_test,
+				      NULL, &fops_u64_wo)) {
+		debugfs_remove(skx_test);
+		skx_test = NULL;
+	}
+}
+
+void teardown_skx_debug(void)
+{
+	debugfs_remove_recursive(skx_test);
+}
+#endif /*CONFIG_EDAC_DEBUG*/
diff --git a/drivers/edac/skx_common.h b/drivers/edac/skx_common.h
new file mode 100644
index 000000000000..d25374e34d4f
--- /dev/null
+++ b/drivers/edac/skx_common.h
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Common codes for both the skx_edac driver and Intel 10nm server EDAC driver.
+ * Originally split out from the skx_edac driver.
+ *
+ * Copyright (c) 2018, Intel Corporation.
+ */
+
+#ifndef _SKX_COMM_EDAC_H
+#define _SKX_COMM_EDAC_H
+
+#define MSG_SIZE		1024
+
+/*
+ * Debug macros
+ */
+#define skx_printk(level, fmt, arg...)			\
+	edac_printk(level, "skx", fmt, ##arg)
+
+#define skx_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg)
+
+/*
+ * Get a bit field at register value <v>, from bit <lo> to bit <hi>
+ */
+#define GET_BITFIELD(v, lo, hi) \
+	(((v) & GENMASK_ULL((hi), (lo))) >> (lo))
+
+#define SKX_NUM_IMC		2	/* Memory controllers per socket */
+#define SKX_NUM_CHANNELS	3	/* Channels per memory controller */
+#define SKX_NUM_DIMMS		2	/* Max DIMMS per channel */
+
+#define I10NM_NUM_IMC		4
+#define I10NM_NUM_CHANNELS	2
+#define I10NM_NUM_DIMMS		2
+
+#define MAX(a, b)	((a) > (b) ? (a) : (b))
+#define NUM_IMC		MAX(SKX_NUM_IMC, I10NM_NUM_IMC)
+#define NUM_CHANNELS	MAX(SKX_NUM_CHANNELS, I10NM_NUM_CHANNELS)
+#define NUM_DIMMS	MAX(SKX_NUM_DIMMS, I10NM_NUM_DIMMS)
+
+#define IS_DIMM_PRESENT(r)		GET_BITFIELD(r, 15, 15)
+#define IS_NVDIMM_PRESENT(r, i)		GET_BITFIELD(r, i, i)
+
+/*
+ * Each cpu socket contains some pci devices that provide global
+ * information, and also some that are local to each of the two
+ * memory controllers on the die.
+ */
+struct skx_dev {
+	struct list_head list;
+	u8 bus[4];
+	int seg;
+	struct pci_dev *sad_all;
+	struct pci_dev *util_all;
+	struct pci_dev *uracu; /* for i10nm CPU */
+	u32 mcroute;
+	struct skx_imc {
+		struct mem_ctl_info *mci;
+		struct pci_dev *mdev; /* for i10nm CPU */
+		void __iomem *mbase;  /* for i10nm CPU */
+		u8 mc;	/* system wide mc# */
+		u8 lmc;	/* socket relative mc# */
+		u8 src_id, node_id;
+		struct skx_channel {
+			struct pci_dev	*cdev;
+			struct skx_dimm {
+				u8 close_pg;
+				u8 bank_xor_enable;
+				u8 fine_grain_bank;
+				u8 rowbits;
+				u8 colbits;
+			} dimms[NUM_DIMMS];
+		} chan[NUM_CHANNELS];
+	} imc[NUM_IMC];
+};
+
+struct skx_pvt {
+	struct skx_imc	*imc;
+};
+
+enum type {
+	SKX,
+	I10NM
+};
+
+enum {
+	INDEX_SOCKET,
+	INDEX_MEMCTRL,
+	INDEX_CHANNEL,
+	INDEX_DIMM,
+	INDEX_MAX
+};
+
+struct decoded_addr {
+	struct skx_dev *dev;
+	u64	addr;
+	int	socket;
+	int	imc;
+	int	channel;
+	u64	chan_addr;
+	int	sktways;
+	int	chanways;
+	int	dimm;
+	int	rank;
+	int	channel_rank;
+	u64	rank_address;
+	int	row;
+	int	column;
+	int	bank_address;
+	int	bank_group;
+};
+
+typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci);
+typedef bool (*skx_decode_f)(struct decoded_addr *res);
+
+int __init skx_adxl_get(void);
+void __exit skx_adxl_put(void);
+void skx_set_decode(skx_decode_f decode);
+
+int skx_get_src_id(struct skx_dev *d, u8 *id);
+int skx_get_node_id(struct skx_dev *d, u8 *id);
+
+int skx_get_all_bus_mappings(unsigned int did, int off, enum type,
+			     struct list_head **list);
+
+int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm);
+
+int skx_get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
+		      struct skx_imc *imc, int chan, int dimmno);
+
+int skx_get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
+			int chan, int dimmno, const char *mod_str);
+
+int skx_register_mci(struct skx_imc *imc, struct pci_dev *pdev,
+		     const char *ctl_name, const char *mod_str,
+		     get_dimm_config_f get_dimm_config);
+
+int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
+			void *data);
+
+void skx_remove(void);
+
+#ifdef CONFIG_EDAC_DEBUG
+void setup_skx_debug(const char *dirname);
+void teardown_skx_debug(void);
+#else
+static inline void setup_skx_debug(const char *dirname) {}
+static inline void teardown_skx_debug(void) {}
+#endif /*CONFIG_EDAC_DEBUG*/
+
+#endif /* _SKX_COMM_EDAC_H */
diff --git a/drivers/edac/skx_edac.c b/drivers/edac/skx_edac.c
deleted file mode 100644
index 93ef161bb5e1..000000000000
--- a/drivers/edac/skx_edac.c
+++ /dev/null
@@ -1,1358 +0,0 @@
-/*
- * EDAC driver for Intel(R) Xeon(R) Skylake processors
- * Copyright (c) 2016, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/dmi.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/edac.h>
-#include <linux/mmzone.h>
-#include <linux/smp.h>
-#include <linux/bitmap.h>
-#include <linux/math64.h>
-#include <linux/mod_devicetable.h>
-#include <linux/adxl.h>
-#include <acpi/nfit.h>
-#include <asm/cpu_device_id.h>
-#include <asm/intel-family.h>
-#include <asm/processor.h>
-#include <asm/mce.h>
-
-#include "edac_module.h"
-
-#define EDAC_MOD_STR    "skx_edac"
-#define MSG_SIZE	1024
-
-/*
- * Debug macros
- */
-#define skx_printk(level, fmt, arg...)			\
-	edac_printk(level, "skx", fmt, ##arg)
-
-#define skx_mc_printk(mci, level, fmt, arg...)		\
-	edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg)
-
-/*
- * Get a bit field at register value <v>, from bit <lo> to bit <hi>
- */
-#define GET_BITFIELD(v, lo, hi) \
-	(((v) & GENMASK_ULL((hi), (lo))) >> (lo))
-
-static LIST_HEAD(skx_edac_list);
-
-static u64 skx_tolm, skx_tohm;
-static char *skx_msg;
-static unsigned int nvdimm_count;
-
-enum {
-	INDEX_SOCKET,
-	INDEX_MEMCTRL,
-	INDEX_CHANNEL,
-	INDEX_DIMM,
-	INDEX_MAX
-};
-
-static const char * const component_names[] = {
-	[INDEX_SOCKET]	= "ProcessorSocketId",
-	[INDEX_MEMCTRL]	= "MemoryControllerId",
-	[INDEX_CHANNEL]	= "ChannelId",
-	[INDEX_DIMM]	= "DimmSlotId",
-};
-
-static int component_indices[ARRAY_SIZE(component_names)];
-static int adxl_component_count;
-static const char * const *adxl_component_names;
-static u64 *adxl_values;
-static char *adxl_msg;
-
-#define NUM_IMC			2	/* memory controllers per socket */
-#define NUM_CHANNELS		3	/* channels per memory controller */
-#define NUM_DIMMS		2	/* Max DIMMS per channel */
-
-#define	MASK26	0x3FFFFFF		/* Mask for 2^26 */
-#define MASK29	0x1FFFFFFF		/* Mask for 2^29 */
-
-/*
- * Each cpu socket contains some pci devices that provide global
- * information, and also some that are local to each of the two
- * memory controllers on the die.
- */
-struct skx_dev {
-	struct list_head	list;
-	u8			bus[4];
-	int			seg;
-	struct pci_dev	*sad_all;
-	struct pci_dev	*util_all;
-	u32	mcroute;
-	struct skx_imc {
-		struct mem_ctl_info *mci;
-		u8	mc;	/* system wide mc# */
-		u8	lmc;	/* socket relative mc# */
-		u8	src_id, node_id;
-		struct skx_channel {
-			struct pci_dev *cdev;
-			struct skx_dimm {
-				u8	close_pg;
-				u8	bank_xor_enable;
-				u8	fine_grain_bank;
-				u8	rowbits;
-				u8	colbits;
-			} dimms[NUM_DIMMS];
-		} chan[NUM_CHANNELS];
-	} imc[NUM_IMC];
-};
-static int skx_num_sockets;
-
-struct skx_pvt {
-	struct skx_imc	*imc;
-};
-
-struct decoded_addr {
-	struct skx_dev *dev;
-	u64	addr;
-	int	socket;
-	int	imc;
-	int	channel;
-	u64	chan_addr;
-	int	sktways;
-	int	chanways;
-	int	dimm;
-	int	rank;
-	int	channel_rank;
-	u64	rank_address;
-	int	row;
-	int	column;
-	int	bank_address;
-	int	bank_group;
-};
-
-static struct skx_dev *get_skx_dev(struct pci_bus *bus, u8 idx)
-{
-	struct skx_dev *d;
-
-	list_for_each_entry(d, &skx_edac_list, list) {
-		if (d->seg == pci_domain_nr(bus) && d->bus[idx] == bus->number)
-			return d;
-	}
-
-	return NULL;
-}
-
-enum munittype {
-	CHAN0, CHAN1, CHAN2, SAD_ALL, UTIL_ALL, SAD
-};
-
-struct munit {
-	u16	did;
-	u16	devfn[NUM_IMC];
-	u8	busidx;
-	u8	per_socket;
-	enum munittype mtype;
-};
-
-/*
- * List of PCI device ids that we need together with some device
- * number and function numbers to tell which memory controller the
- * device belongs to.
- */
-static const struct munit skx_all_munits[] = {
-	{ 0x2054, { }, 1, 1, SAD_ALL },
-	{ 0x2055, { }, 1, 1, UTIL_ALL },
-	{ 0x2040, { PCI_DEVFN(10, 0), PCI_DEVFN(12, 0) }, 2, 2, CHAN0 },
-	{ 0x2044, { PCI_DEVFN(10, 4), PCI_DEVFN(12, 4) }, 2, 2, CHAN1 },
-	{ 0x2048, { PCI_DEVFN(11, 0), PCI_DEVFN(13, 0) }, 2, 2, CHAN2 },
-	{ 0x208e, { }, 1, 0, SAD },
-	{ }
-};
-
-/*
- * We use the per-socket device 0x2016 to count how many sockets are present,
- * and to detemine which PCI buses are associated with each socket. Allocate
- * and build the full list of all the skx_dev structures that we need here.
- */
-static int get_all_bus_mappings(void)
-{
-	struct pci_dev *pdev, *prev;
-	struct skx_dev *d;
-	u32 reg;
-	int ndev = 0;
-
-	prev = NULL;
-	for (;;) {
-		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2016, prev);
-		if (!pdev)
-			break;
-		ndev++;
-		d = kzalloc(sizeof(*d), GFP_KERNEL);
-		if (!d) {
-			pci_dev_put(pdev);
-			return -ENOMEM;
-		}
-		d->seg = pci_domain_nr(pdev->bus);
-		pci_read_config_dword(pdev, 0xCC, &reg);
-		d->bus[0] =  GET_BITFIELD(reg, 0, 7);
-		d->bus[1] =  GET_BITFIELD(reg, 8, 15);
-		d->bus[2] =  GET_BITFIELD(reg, 16, 23);
-		d->bus[3] =  GET_BITFIELD(reg, 24, 31);
-		edac_dbg(2, "busses: 0x%x, 0x%x, 0x%x, 0x%x\n",
-			 d->bus[0], d->bus[1], d->bus[2], d->bus[3]);
-		list_add_tail(&d->list, &skx_edac_list);
-		skx_num_sockets++;
-		prev = pdev;
-	}
-
-	return ndev;
-}
-
-static int get_all_munits(const struct munit *m)
-{
-	struct pci_dev *pdev, *prev;
-	struct skx_dev *d;
-	u32 reg;
-	int i = 0, ndev = 0;
-
-	prev = NULL;
-	for (;;) {
-		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, m->did, prev);
-		if (!pdev)
-			break;
-		ndev++;
-		if (m->per_socket == NUM_IMC) {
-			for (i = 0; i < NUM_IMC; i++)
-				if (m->devfn[i] == pdev->devfn)
-					break;
-			if (i == NUM_IMC)
-				goto fail;
-		}
-		d = get_skx_dev(pdev->bus, m->busidx);
-		if (!d)
-			goto fail;
-
-		/* Be sure that the device is enabled */
-		if (unlikely(pci_enable_device(pdev) < 0)) {
-			skx_printk(KERN_ERR, "Couldn't enable device %04x:%04x\n",
-				   PCI_VENDOR_ID_INTEL, m->did);
-			goto fail;
-		}
-
-		switch (m->mtype) {
-		case CHAN0: case CHAN1: case CHAN2:
-			pci_dev_get(pdev);
-			d->imc[i].chan[m->mtype].cdev = pdev;
-			break;
-		case SAD_ALL:
-			pci_dev_get(pdev);
-			d->sad_all = pdev;
-			break;
-		case UTIL_ALL:
-			pci_dev_get(pdev);
-			d->util_all = pdev;
-			break;
-		case SAD:
-			/*
-			 * one of these devices per core, including cores
-			 * that don't exist on this SKU. Ignore any that
-			 * read a route table of zero, make sure all the
-			 * non-zero values match.
-			 */
-			pci_read_config_dword(pdev, 0xB4, &reg);
-			if (reg != 0) {
-				if (d->mcroute == 0)
-					d->mcroute = reg;
-				else if (d->mcroute != reg) {
-					skx_printk(KERN_ERR,
-						"mcroute mismatch\n");
-					goto fail;
-				}
-			}
-			ndev--;
-			break;
-		}
-
-		prev = pdev;
-	}
-
-	return ndev;
-fail:
-	pci_dev_put(pdev);
-	return -ENODEV;
-}
-
-static const struct x86_cpu_id skx_cpuids[] = {
-	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_X, 0, 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(x86cpu, skx_cpuids);
-
-static u8 get_src_id(struct skx_dev *d)
-{
-	u32 reg;
-
-	pci_read_config_dword(d->util_all, 0xF0, &reg);
-
-	return GET_BITFIELD(reg, 12, 14);
-}
-
-static u8 skx_get_node_id(struct skx_dev *d)
-{
-	u32 reg;
-
-	pci_read_config_dword(d->util_all, 0xF4, &reg);
-
-	return GET_BITFIELD(reg, 0, 2);
-}
-
-static int get_dimm_attr(u32 reg, int lobit, int hibit, int add, int minval,
-			 int maxval, char *name)
-{
-	u32 val = GET_BITFIELD(reg, lobit, hibit);
-
-	if (val < minval || val > maxval) {
-		edac_dbg(2, "bad %s = %d (raw=0x%x)\n", name, val, reg);
-		return -EINVAL;
-	}
-	return val + add;
-}
-
-#define IS_DIMM_PRESENT(mtr)		GET_BITFIELD((mtr), 15, 15)
-#define IS_NVDIMM_PRESENT(mcddrtcfg, i)	GET_BITFIELD((mcddrtcfg), (i), (i))
-
-#define numrank(reg) get_dimm_attr((reg), 12, 13, 0, 0, 2, "ranks")
-#define numrow(reg) get_dimm_attr((reg), 2, 4, 12, 1, 6, "rows")
-#define numcol(reg) get_dimm_attr((reg), 0, 1, 10, 0, 2, "cols")
-
-static int get_width(u32 mtr)
-{
-	switch (GET_BITFIELD(mtr, 8, 9)) {
-	case 0:
-		return DEV_X4;
-	case 1:
-		return DEV_X8;
-	case 2:
-		return DEV_X16;
-	}
-	return DEV_UNKNOWN;
-}
-
-static int skx_get_hi_lo(void)
-{
-	struct pci_dev *pdev;
-	u32 reg;
-
-	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2034, NULL);
-	if (!pdev) {
-		edac_dbg(0, "Can't get tolm/tohm\n");
-		return -ENODEV;
-	}
-
-	pci_read_config_dword(pdev, 0xD0, &reg);
-	skx_tolm = reg;
-	pci_read_config_dword(pdev, 0xD4, &reg);
-	skx_tohm = reg;
-	pci_read_config_dword(pdev, 0xD8, &reg);
-	skx_tohm |= (u64)reg << 32;
-
-	pci_dev_put(pdev);
-	edac_dbg(2, "tolm=0x%llx tohm=0x%llx\n", skx_tolm, skx_tohm);
-
-	return 0;
-}
-
-static int get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
-			 struct skx_imc *imc, int chan, int dimmno)
-{
-	int  banks = 16, ranks, rows, cols, npages;
-	u64 size;
-
-	ranks = numrank(mtr);
-	rows = numrow(mtr);
-	cols = numcol(mtr);
-
-	/*
-	 * Compute size in 8-byte (2^3) words, then shift to MiB (2^20)
-	 */
-	size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3);
-	npages = MiB_TO_PAGES(size);
-
-	edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: 0x%#x, col: 0x%#x\n",
-		 imc->mc, chan, dimmno, size, npages,
-		 banks, 1 << ranks, rows, cols);
-
-	imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mtr, 0, 0);
-	imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mtr, 9, 9);
-	imc->chan[chan].dimms[dimmno].fine_grain_bank = GET_BITFIELD(amap, 0, 0);
-	imc->chan[chan].dimms[dimmno].rowbits = rows;
-	imc->chan[chan].dimms[dimmno].colbits = cols;
-
-	dimm->nr_pages = npages;
-	dimm->grain = 32;
-	dimm->dtype = get_width(mtr);
-	dimm->mtype = MEM_DDR4;
-	dimm->edac_mode = EDAC_SECDED; /* likely better than this */
-	snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
-		 imc->src_id, imc->lmc, chan, dimmno);
-
-	return 1;
-}
-
-static int get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
-			   int chan, int dimmno)
-{
-	int smbios_handle;
-	u32 dev_handle;
-	u16 flags;
-	u64 size = 0;
-
-	nvdimm_count++;
-
-	dev_handle = ACPI_NFIT_BUILD_DEVICE_HANDLE(dimmno, chan, imc->lmc,
-						   imc->src_id, 0);
-
-	smbios_handle = nfit_get_smbios_id(dev_handle, &flags);
-	if (smbios_handle == -EOPNOTSUPP) {
-		pr_warn_once(EDAC_MOD_STR ": Can't find size of NVDIMM. Try enabling CONFIG_ACPI_NFIT\n");
-		goto unknown_size;
-	}
-
-	if (smbios_handle < 0) {
-		skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=0x%x\n", dev_handle);
-		goto unknown_size;
-	}
-
-	if (flags & ACPI_NFIT_MEM_MAP_FAILED) {
-		skx_printk(KERN_ERR, "NVDIMM ADR=0x%x is not mapped\n", dev_handle);
-		goto unknown_size;
-	}
-
-	size = dmi_memdev_size(smbios_handle);
-	if (size == ~0ull)
-		skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=0x%x/SMBIOS=0x%x\n",
-			   dev_handle, smbios_handle);
-
-unknown_size:
-	dimm->nr_pages = size >> PAGE_SHIFT;
-	dimm->grain = 32;
-	dimm->dtype = DEV_UNKNOWN;
-	dimm->mtype = MEM_NVDIMM;
-	dimm->edac_mode = EDAC_SECDED; /* likely better than this */
-
-	edac_dbg(0, "mc#%d: channel %d, dimm %d, %llu MiB (%u pages)\n",
-		 imc->mc, chan, dimmno, size >> 20, dimm->nr_pages);
-
-	snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
-		 imc->src_id, imc->lmc, chan, dimmno);
-
-	return (size == 0 || size == ~0ull) ? 0 : 1;
-}
-
-#define SKX_GET_MTMTR(dev, reg) \
-	pci_read_config_dword((dev), 0x87c, &reg)
-
-static bool skx_check_ecc(struct pci_dev *pdev)
-{
-	u32 mtmtr;
-
-	SKX_GET_MTMTR(pdev, mtmtr);
-
-	return !!GET_BITFIELD(mtmtr, 2, 2);
-}
-
-static int skx_get_dimm_config(struct mem_ctl_info *mci)
-{
-	struct skx_pvt *pvt = mci->pvt_info;
-	struct skx_imc *imc = pvt->imc;
-	u32 mtr, amap, mcddrtcfg;
-	struct dimm_info *dimm;
-	int i, j;
-	int ndimms;
-
-	for (i = 0; i < NUM_CHANNELS; i++) {
-		ndimms = 0;
-		pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap);
-		pci_read_config_dword(imc->chan[i].cdev, 0x400, &mcddrtcfg);
-		for (j = 0; j < NUM_DIMMS; j++) {
-			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
-					     mci->n_layers, i, j, 0);
-			pci_read_config_dword(imc->chan[i].cdev,
-					0x80 + 4*j, &mtr);
-			if (IS_DIMM_PRESENT(mtr))
-				ndimms += get_dimm_info(mtr, amap, dimm, imc, i, j);
-			else if (IS_NVDIMM_PRESENT(mcddrtcfg, j))
-				ndimms += get_nvdimm_info(dimm, imc, i, j);
-		}
-		if (ndimms && !skx_check_ecc(imc->chan[0].cdev)) {
-			skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc);
-			return -ENODEV;
-		}
-	}
-
-	return 0;
-}
-
-static void skx_unregister_mci(struct skx_imc *imc)
-{
-	struct mem_ctl_info *mci = imc->mci;
-
-	if (!mci)
-		return;
-
-	edac_dbg(0, "MC%d: mci = %p\n", imc->mc, mci);
-
-	/* Remove MC sysfs nodes */
-	edac_mc_del_mc(mci->pdev);
-
-	edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
-	kfree(mci->ctl_name);
-	edac_mc_free(mci);
-}
-
-static int skx_register_mci(struct skx_imc *imc)
-{
-	struct mem_ctl_info *mci;
-	struct edac_mc_layer layers[2];
-	struct pci_dev *pdev = imc->chan[0].cdev;
-	struct skx_pvt *pvt;
-	int rc;
-
-	/* allocate a new MC control structure */
-	layers[0].type = EDAC_MC_LAYER_CHANNEL;
-	layers[0].size = NUM_CHANNELS;
-	layers[0].is_virt_csrow = false;
-	layers[1].type = EDAC_MC_LAYER_SLOT;
-	layers[1].size = NUM_DIMMS;
-	layers[1].is_virt_csrow = true;
-	mci = edac_mc_alloc(imc->mc, ARRAY_SIZE(layers), layers,
-			    sizeof(struct skx_pvt));
-
-	if (unlikely(!mci))
-		return -ENOMEM;
-
-	edac_dbg(0, "MC#%d: mci = %p\n", imc->mc, mci);
-
-	/* Associate skx_dev and mci for future usage */
-	imc->mci = mci;
-	pvt = mci->pvt_info;
-	pvt->imc = imc;
-
-	mci->ctl_name = kasprintf(GFP_KERNEL, "Skylake Socket#%d IMC#%d",
-				  imc->node_id, imc->lmc);
-	if (!mci->ctl_name) {
-		rc = -ENOMEM;
-		goto fail0;
-	}
-
-	mci->mtype_cap = MEM_FLAG_DDR4 | MEM_FLAG_NVDIMM;
-	mci->edac_ctl_cap = EDAC_FLAG_NONE;
-	mci->edac_cap = EDAC_FLAG_NONE;
-	mci->mod_name = EDAC_MOD_STR;
-	mci->dev_name = pci_name(imc->chan[0].cdev);
-	mci->ctl_page_to_phys = NULL;
-
-	rc = skx_get_dimm_config(mci);
-	if (rc < 0)
-		goto fail;
-
-	/* record ptr to the generic device */
-	mci->pdev = &pdev->dev;
-
-	/* add this new MC control structure to EDAC's list of MCs */
-	if (unlikely(edac_mc_add_mc(mci))) {
-		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
-		rc = -EINVAL;
-		goto fail;
-	}
-
-	return 0;
-
-fail:
-	kfree(mci->ctl_name);
-fail0:
-	edac_mc_free(mci);
-	imc->mci = NULL;
-	return rc;
-}
-
-#define	SKX_MAX_SAD 24
-
-#define SKX_GET_SAD(d, i, reg)	\
-	pci_read_config_dword((d)->sad_all, 0x60 + 8 * (i), &reg)
-#define SKX_GET_ILV(d, i, reg)	\
-	pci_read_config_dword((d)->sad_all, 0x64 + 8 * (i), &reg)
-
-#define	SKX_SAD_MOD3MODE(sad)	GET_BITFIELD((sad), 30, 31)
-#define	SKX_SAD_MOD3(sad)	GET_BITFIELD((sad), 27, 27)
-#define SKX_SAD_LIMIT(sad)	(((u64)GET_BITFIELD((sad), 7, 26) << 26) | MASK26)
-#define	SKX_SAD_MOD3ASMOD2(sad)	GET_BITFIELD((sad), 5, 6)
-#define	SKX_SAD_ATTR(sad)	GET_BITFIELD((sad), 3, 4)
-#define	SKX_SAD_INTERLEAVE(sad)	GET_BITFIELD((sad), 1, 2)
-#define SKX_SAD_ENABLE(sad)	GET_BITFIELD((sad), 0, 0)
-
-#define SKX_ILV_REMOTE(tgt)	(((tgt) & 8) == 0)
-#define SKX_ILV_TARGET(tgt)	((tgt) & 7)
-
-static bool skx_sad_decode(struct decoded_addr *res)
-{
-	struct skx_dev *d = list_first_entry(&skx_edac_list, typeof(*d), list);
-	u64 addr = res->addr;
-	int i, idx, tgt, lchan, shift;
-	u32 sad, ilv;
-	u64 limit, prev_limit;
-	int remote = 0;
-
-	/* Simple sanity check for I/O space or out of range */
-	if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) {
-		edac_dbg(0, "Address 0x%llx out of range\n", addr);
-		return false;
-	}
-
-restart:
-	prev_limit = 0;
-	for (i = 0; i < SKX_MAX_SAD; i++) {
-		SKX_GET_SAD(d, i, sad);
-		limit = SKX_SAD_LIMIT(sad);
-		if (SKX_SAD_ENABLE(sad)) {
-			if (addr >= prev_limit && addr <= limit)
-				goto sad_found;
-		}
-		prev_limit = limit + 1;
-	}
-	edac_dbg(0, "No SAD entry for 0x%llx\n", addr);
-	return false;
-
-sad_found:
-	SKX_GET_ILV(d, i, ilv);
-
-	switch (SKX_SAD_INTERLEAVE(sad)) {
-	case 0:
-		idx = GET_BITFIELD(addr, 6, 8);
-		break;
-	case 1:
-		idx = GET_BITFIELD(addr, 8, 10);
-		break;
-	case 2:
-		idx = GET_BITFIELD(addr, 12, 14);
-		break;
-	case 3:
-		idx = GET_BITFIELD(addr, 30, 32);
-		break;
-	}
-
-	tgt = GET_BITFIELD(ilv, 4 * idx, 4 * idx + 3);
-
-	/* If point to another node, find it and start over */
-	if (SKX_ILV_REMOTE(tgt)) {
-		if (remote) {
-			edac_dbg(0, "Double remote!\n");
-			return false;
-		}
-		remote = 1;
-		list_for_each_entry(d, &skx_edac_list, list) {
-			if (d->imc[0].src_id == SKX_ILV_TARGET(tgt))
-				goto restart;
-		}
-		edac_dbg(0, "Can't find node %d\n", SKX_ILV_TARGET(tgt));
-		return false;
-	}
-
-	if (SKX_SAD_MOD3(sad) == 0)
-		lchan = SKX_ILV_TARGET(tgt);
-	else {
-		switch (SKX_SAD_MOD3MODE(sad)) {
-		case 0:
-			shift = 6;
-			break;
-		case 1:
-			shift = 8;
-			break;
-		case 2:
-			shift = 12;
-			break;
-		default:
-			edac_dbg(0, "illegal mod3mode\n");
-			return false;
-		}
-		switch (SKX_SAD_MOD3ASMOD2(sad)) {
-		case 0:
-			lchan = (addr >> shift) % 3;
-			break;
-		case 1:
-			lchan = (addr >> shift) % 2;
-			break;
-		case 2:
-			lchan = (addr >> shift) % 2;
-			lchan = (lchan << 1) | !lchan;
-			break;
-		case 3:
-			lchan = ((addr >> shift) % 2) << 1;
-			break;
-		}
-		lchan = (lchan << 1) | (SKX_ILV_TARGET(tgt) & 1);
-	}
-
-	res->dev = d;
-	res->socket = d->imc[0].src_id;
-	res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2);
-	res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19);
-
-	edac_dbg(2, "0x%llx: socket=%d imc=%d channel=%d\n",
-		 res->addr, res->socket, res->imc, res->channel);
-	return true;
-}
-
-#define	SKX_MAX_TAD 8
-
-#define SKX_GET_TADBASE(d, mc, i, reg)			\
-	pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x850 + 4 * (i), &reg)
-#define SKX_GET_TADWAYNESS(d, mc, i, reg)		\
-	pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x880 + 4 * (i), &reg)
-#define SKX_GET_TADCHNILVOFFSET(d, mc, ch, i, reg)	\
-	pci_read_config_dword((d)->imc[mc].chan[ch].cdev, 0x90 + 4 * (i), &reg)
-
-#define	SKX_TAD_BASE(b)		((u64)GET_BITFIELD((b), 12, 31) << 26)
-#define SKX_TAD_SKT_GRAN(b)	GET_BITFIELD((b), 4, 5)
-#define SKX_TAD_CHN_GRAN(b)	GET_BITFIELD((b), 6, 7)
-#define	SKX_TAD_LIMIT(b)	(((u64)GET_BITFIELD((b), 12, 31) << 26) | MASK26)
-#define	SKX_TAD_OFFSET(b)	((u64)GET_BITFIELD((b), 4, 23) << 26)
-#define	SKX_TAD_SKTWAYS(b)	(1 << GET_BITFIELD((b), 10, 11))
-#define	SKX_TAD_CHNWAYS(b)	(GET_BITFIELD((b), 8, 9) + 1)
-
-/* which bit used for both socket and channel interleave */
-static int skx_granularity[] = { 6, 8, 12, 30 };
-
-static u64 skx_do_interleave(u64 addr, int shift, int ways, u64 lowbits)
-{
-	addr >>= shift;
-	addr /= ways;
-	addr <<= shift;
-
-	return addr | (lowbits & ((1ull << shift) - 1));
-}
-
-static bool skx_tad_decode(struct decoded_addr *res)
-{
-	int i;
-	u32 base, wayness, chnilvoffset;
-	int skt_interleave_bit, chn_interleave_bit;
-	u64 channel_addr;
-
-	for (i = 0; i < SKX_MAX_TAD; i++) {
-		SKX_GET_TADBASE(res->dev, res->imc, i, base);
-		SKX_GET_TADWAYNESS(res->dev, res->imc, i, wayness);
-		if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness))
-			goto tad_found;
-	}
-	edac_dbg(0, "No TAD entry for 0x%llx\n", res->addr);
-	return false;
-
-tad_found:
-	res->sktways = SKX_TAD_SKTWAYS(wayness);
-	res->chanways = SKX_TAD_CHNWAYS(wayness);
-	skt_interleave_bit = skx_granularity[SKX_TAD_SKT_GRAN(base)];
-	chn_interleave_bit = skx_granularity[SKX_TAD_CHN_GRAN(base)];
-
-	SKX_GET_TADCHNILVOFFSET(res->dev, res->imc, res->channel, i, chnilvoffset);
-	channel_addr = res->addr - SKX_TAD_OFFSET(chnilvoffset);
-
-	if (res->chanways == 3 && skt_interleave_bit > chn_interleave_bit) {
-		/* Must handle channel first, then socket */
-		channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
-						 res->chanways, channel_addr);
-		channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
-						 res->sktways, channel_addr);
-	} else {
-		/* Handle socket then channel. Preserve low bits from original address */
-		channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
-						 res->sktways, res->addr);
-		channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
-						 res->chanways, res->addr);
-	}
-
-	res->chan_addr = channel_addr;
-
-	edac_dbg(2, "0x%llx: chan_addr=0x%llx sktways=%d chanways=%d\n",
-		 res->addr, res->chan_addr, res->sktways, res->chanways);
-	return true;
-}
-
-#define SKX_MAX_RIR 4
-
-#define SKX_GET_RIRWAYNESS(d, mc, ch, i, reg)		\
-	pci_read_config_dword((d)->imc[mc].chan[ch].cdev,	\
-			      0x108 + 4 * (i), &reg)
-#define SKX_GET_RIRILV(d, mc, ch, idx, i, reg)		\
-	pci_read_config_dword((d)->imc[mc].chan[ch].cdev,	\
-			      0x120 + 16 * idx + 4 * (i), &reg)
-
-#define	SKX_RIR_VALID(b) GET_BITFIELD((b), 31, 31)
-#define	SKX_RIR_LIMIT(b) (((u64)GET_BITFIELD((b), 1, 11) << 29) | MASK29)
-#define	SKX_RIR_WAYS(b) (1 << GET_BITFIELD((b), 28, 29))
-#define	SKX_RIR_CHAN_RANK(b) GET_BITFIELD((b), 16, 19)
-#define	SKX_RIR_OFFSET(b) ((u64)(GET_BITFIELD((b), 2, 15) << 26))
-
-static bool skx_rir_decode(struct decoded_addr *res)
-{
-	int i, idx, chan_rank;
-	int shift;
-	u32 rirway, rirlv;
-	u64 rank_addr, prev_limit = 0, limit;
-
-	if (res->dev->imc[res->imc].chan[res->channel].dimms[0].close_pg)
-		shift = 6;
-	else
-		shift = 13;
-
-	for (i = 0; i < SKX_MAX_RIR; i++) {
-		SKX_GET_RIRWAYNESS(res->dev, res->imc, res->channel, i, rirway);
-		limit = SKX_RIR_LIMIT(rirway);
-		if (SKX_RIR_VALID(rirway)) {
-			if (prev_limit <= res->chan_addr &&
-			    res->chan_addr <= limit)
-				goto rir_found;
-		}
-		prev_limit = limit;
-	}
-	edac_dbg(0, "No RIR entry for 0x%llx\n", res->addr);
-	return false;
-
-rir_found:
-	rank_addr = res->chan_addr >> shift;
-	rank_addr /= SKX_RIR_WAYS(rirway);
-	rank_addr <<= shift;
-	rank_addr |= res->chan_addr & GENMASK_ULL(shift - 1, 0);
-
-	res->rank_address = rank_addr;
-	idx = (res->chan_addr >> shift) % SKX_RIR_WAYS(rirway);
-
-	SKX_GET_RIRILV(res->dev, res->imc, res->channel, idx, i, rirlv);
-	res->rank_address = rank_addr - SKX_RIR_OFFSET(rirlv);
-	chan_rank = SKX_RIR_CHAN_RANK(rirlv);
-	res->channel_rank = chan_rank;
-	res->dimm = chan_rank / 4;
-	res->rank = chan_rank % 4;
-
-	edac_dbg(2, "0x%llx: dimm=%d rank=%d chan_rank=%d rank_addr=0x%llx\n",
-		 res->addr, res->dimm, res->rank,
-		 res->channel_rank, res->rank_address);
-	return true;
-}
-
-static u8 skx_close_row[] = {
-	15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33
-};
-static u8 skx_close_column[] = {
-	3, 4, 5, 14, 19, 23, 24, 25, 26, 27
-};
-static u8 skx_open_row[] = {
-	14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33
-};
-static u8 skx_open_column[] = {
-	3, 4, 5, 6, 7, 8, 9, 10, 11, 12
-};
-static u8 skx_open_fine_column[] = {
-	3, 4, 5, 7, 8, 9, 10, 11, 12, 13
-};
-
-static int skx_bits(u64 addr, int nbits, u8 *bits)
-{
-	int i, res = 0;
-
-	for (i = 0; i < nbits; i++)
-		res |= ((addr >> bits[i]) & 1) << i;
-	return res;
-}
-
-static int skx_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1)
-{
-	int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1);
-
-	if (do_xor)
-		ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1);
-
-	return ret;
-}
-
-static bool skx_mad_decode(struct decoded_addr *r)
-{
-	struct skx_dimm *dimm = &r->dev->imc[r->imc].chan[r->channel].dimms[r->dimm];
-	int bg0 = dimm->fine_grain_bank ? 6 : 13;
-
-	if (dimm->close_pg) {
-		r->row = skx_bits(r->rank_address, dimm->rowbits, skx_close_row);
-		r->column = skx_bits(r->rank_address, dimm->colbits, skx_close_column);
-		r->column |= 0x400; /* C10 is autoprecharge, always set */
-		r->bank_address = skx_bank_bits(r->rank_address, 8, 9, dimm->bank_xor_enable, 22, 28);
-		r->bank_group = skx_bank_bits(r->rank_address, 6, 7, dimm->bank_xor_enable, 20, 21);
-	} else {
-		r->row = skx_bits(r->rank_address, dimm->rowbits, skx_open_row);
-		if (dimm->fine_grain_bank)
-			r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_fine_column);
-		else
-			r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_column);
-		r->bank_address = skx_bank_bits(r->rank_address, 18, 19, dimm->bank_xor_enable, 22, 23);
-		r->bank_group = skx_bank_bits(r->rank_address, bg0, 17, dimm->bank_xor_enable, 20, 21);
-	}
-	r->row &= (1u << dimm->rowbits) - 1;
-
-	edac_dbg(2, "0x%llx: row=0x%x col=0x%x bank_addr=%d bank_group=%d\n",
-		 r->addr, r->row, r->column, r->bank_address,
-		 r->bank_group);
-	return true;
-}
-
-static bool skx_decode(struct decoded_addr *res)
-{
-
-	return skx_sad_decode(res) && skx_tad_decode(res) &&
-		skx_rir_decode(res) && skx_mad_decode(res);
-}
-
-static bool skx_adxl_decode(struct decoded_addr *res)
-
-{
-	int i, len = 0;
-
-	if (res->addr >= skx_tohm || (res->addr >= skx_tolm &&
-				      res->addr < BIT_ULL(32))) {
-		edac_dbg(0, "Address 0x%llx out of range\n", res->addr);
-		return false;
-	}
-
-	if (adxl_decode(res->addr, adxl_values)) {
-		edac_dbg(0, "Failed to decode 0x%llx\n", res->addr);
-		return false;
-	}
-
-	res->socket  = (int)adxl_values[component_indices[INDEX_SOCKET]];
-	res->imc     = (int)adxl_values[component_indices[INDEX_MEMCTRL]];
-	res->channel = (int)adxl_values[component_indices[INDEX_CHANNEL]];
-	res->dimm    = (int)adxl_values[component_indices[INDEX_DIMM]];
-
-	for (i = 0; i < adxl_component_count; i++) {
-		if (adxl_values[i] == ~0x0ull)
-			continue;
-
-		len += snprintf(adxl_msg + len, MSG_SIZE - len, " %s:0x%llx",
-				adxl_component_names[i], adxl_values[i]);
-		if (MSG_SIZE - len <= 0)
-			break;
-	}
-
-	return true;
-}
-
-static void skx_mce_output_error(struct mem_ctl_info *mci,
-				 const struct mce *m,
-				 struct decoded_addr *res)
-{
-	enum hw_event_mc_err_type tp_event;
-	char *type, *optype;
-	bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
-	bool overflow = GET_BITFIELD(m->status, 62, 62);
-	bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
-	bool recoverable;
-	u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
-	u32 mscod = GET_BITFIELD(m->status, 16, 31);
-	u32 errcode = GET_BITFIELD(m->status, 0, 15);
-	u32 optypenum = GET_BITFIELD(m->status, 4, 6);
-
-	recoverable = GET_BITFIELD(m->status, 56, 56);
-
-	if (uncorrected_error) {
-		core_err_cnt = 1;
-		if (ripv) {
-			type = "FATAL";
-			tp_event = HW_EVENT_ERR_FATAL;
-		} else {
-			type = "NON_FATAL";
-			tp_event = HW_EVENT_ERR_UNCORRECTED;
-		}
-	} else {
-		type = "CORRECTED";
-		tp_event = HW_EVENT_ERR_CORRECTED;
-	}
-
-	/*
-	 * According with Table 15-9 of the Intel Architecture spec vol 3A,
-	 * memory errors should fit in this mask:
-	 *	000f 0000 1mmm cccc (binary)
-	 * where:
-	 *	f = Correction Report Filtering Bit. If 1, subsequent errors
-	 *	    won't be shown
-	 *	mmm = error type
-	 *	cccc = channel
-	 * If the mask doesn't match, report an error to the parsing logic
-	 */
-	if (!((errcode & 0xef80) == 0x80)) {
-		optype = "Can't parse: it is not a mem";
-	} else {
-		switch (optypenum) {
-		case 0:
-			optype = "generic undef request error";
-			break;
-		case 1:
-			optype = "memory read error";
-			break;
-		case 2:
-			optype = "memory write error";
-			break;
-		case 3:
-			optype = "addr/cmd error";
-			break;
-		case 4:
-			optype = "memory scrubbing error";
-			break;
-		default:
-			optype = "reserved";
-			break;
-		}
-	}
-	if (adxl_component_count) {
-		snprintf(skx_msg, MSG_SIZE, "%s%s err_code:0x%04x:0x%04x %s",
-			 overflow ? " OVERFLOW" : "",
-			 (uncorrected_error && recoverable) ? " recoverable" : "",
-			 mscod, errcode, adxl_msg);
-	} else {
-		snprintf(skx_msg, MSG_SIZE,
-			 "%s%s err_code:0x%04x:0x%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:0x%x col:0x%x",
-			 overflow ? " OVERFLOW" : "",
-			 (uncorrected_error && recoverable) ? " recoverable" : "",
-			 mscod, errcode,
-			 res->socket, res->imc, res->rank,
-			 res->bank_group, res->bank_address, res->row, res->column);
-	}
-
-	edac_dbg(0, "%s\n", skx_msg);
-
-	/* Call the helper to output message */
-	edac_mc_handle_error(tp_event, mci, core_err_cnt,
-			     m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0,
-			     res->channel, res->dimm, -1,
-			     optype, skx_msg);
-}
-
-static struct mem_ctl_info *get_mci(int src_id, int lmc)
-{
-	struct skx_dev *d;
-
-	if (lmc > NUM_IMC - 1) {
-		skx_printk(KERN_ERR, "Bad lmc %d\n", lmc);
-		return NULL;
-	}
-
-	list_for_each_entry(d, &skx_edac_list, list) {
-		if (d->imc[0].src_id == src_id)
-			return d->imc[lmc].mci;
-	}
-
-	skx_printk(KERN_ERR, "No mci for src_id %d lmc %d\n", src_id, lmc);
-
-	return NULL;
-}
-
-static int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
-			       void *data)
-{
-	struct mce *mce = (struct mce *)data;
-	struct decoded_addr res;
-	struct mem_ctl_info *mci;
-	char *type;
-
-	if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
-		return NOTIFY_DONE;
-
-	/* ignore unless this is memory related with an address */
-	if ((mce->status & 0xefff) >> 7 != 1 || !(mce->status & MCI_STATUS_ADDRV))
-		return NOTIFY_DONE;
-
-	memset(&res, 0, sizeof(res));
-	res.addr = mce->addr;
-
-	if (adxl_component_count) {
-		if (!skx_adxl_decode(&res))
-			return NOTIFY_DONE;
-
-		mci = get_mci(res.socket, res.imc);
-	} else {
-		if (!skx_decode(&res))
-			return NOTIFY_DONE;
-
-		mci = res.dev->imc[res.imc].mci;
-	}
-
-	if (!mci)
-		return NOTIFY_DONE;
-
-	if (mce->mcgstatus & MCG_STATUS_MCIP)
-		type = "Exception";
-	else
-		type = "Event";
-
-	skx_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n");
-
-	skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: 0x%llx "
-			  "Bank %d: %016Lx\n", mce->extcpu, type,
-			  mce->mcgstatus, mce->bank, mce->status);
-	skx_mc_printk(mci, KERN_DEBUG, "TSC 0x%llx ", mce->tsc);
-	skx_mc_printk(mci, KERN_DEBUG, "ADDR 0x%llx ", mce->addr);
-	skx_mc_printk(mci, KERN_DEBUG, "MISC 0x%llx ", mce->misc);
-
-	skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:0x%x TIME %llu SOCKET "
-			  "%u APIC 0x%x\n", mce->cpuvendor, mce->cpuid,
-			  mce->time, mce->socketid, mce->apicid);
-
-	skx_mce_output_error(mci, mce, &res);
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block skx_mce_dec = {
-	.notifier_call	= skx_mce_check_error,
-	.priority	= MCE_PRIO_EDAC,
-};
-
-#ifdef CONFIG_EDAC_DEBUG
-/*
- * Debug feature.
- * Exercise the address decode logic by writing an address to
- * /sys/kernel/debug/edac/skx_test/addr.
- */
-static struct dentry *skx_test;
-
-static int debugfs_u64_set(void *data, u64 val)
-{
-	struct mce m;
-
-	pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
-
-	memset(&m, 0, sizeof(m));
-	/* ADDRV + MemRd + Unknown channel */
-	m.status = MCI_STATUS_ADDRV + 0x90;
-	/* One corrected error */
-	m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT);
-	m.addr = val;
-	skx_mce_check_error(NULL, 0, &m);
-
-	return 0;
-}
-DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
-
-static void setup_skx_debug(void)
-{
-	skx_test = edac_debugfs_create_dir("skx_test");
-	if (!skx_test)
-		return;
-
-	if (!edac_debugfs_create_file("addr", 0200, skx_test,
-				      NULL, &fops_u64_wo)) {
-		debugfs_remove(skx_test);
-		skx_test = NULL;
-	}
-}
-
-static void teardown_skx_debug(void)
-{
-	debugfs_remove_recursive(skx_test);
-}
-#else
-static void setup_skx_debug(void) {}
-static void teardown_skx_debug(void) {}
-#endif /*CONFIG_EDAC_DEBUG*/
-
-static void skx_remove(void)
-{
-	int i, j;
-	struct skx_dev *d, *tmp;
-
-	edac_dbg(0, "\n");
-
-	list_for_each_entry_safe(d, tmp, &skx_edac_list, list) {
-		list_del(&d->list);
-		for (i = 0; i < NUM_IMC; i++) {
-			skx_unregister_mci(&d->imc[i]);
-			for (j = 0; j < NUM_CHANNELS; j++)
-				pci_dev_put(d->imc[i].chan[j].cdev);
-		}
-		pci_dev_put(d->util_all);
-		pci_dev_put(d->sad_all);
-
-		kfree(d);
-	}
-}
-
-static void __init skx_adxl_get(void)
-{
-	const char * const *names;
-	int i, j;
-
-	names = adxl_get_component_names();
-	if (!names) {
-		skx_printk(KERN_NOTICE, "No firmware support for address translation.");
-		skx_printk(KERN_CONT, " Only decoding DDR4 address!\n");
-		return;
-	}
-
-	for (i = 0; i < INDEX_MAX; i++) {
-		for (j = 0; names[j]; j++) {
-			if (!strcmp(component_names[i], names[j])) {
-				component_indices[i] = j;
-				break;
-			}
-		}
-
-		if (!names[j])
-			goto err;
-	}
-
-	adxl_component_names = names;
-	while (*names++)
-		adxl_component_count++;
-
-	adxl_values = kcalloc(adxl_component_count, sizeof(*adxl_values),
-			      GFP_KERNEL);
-	if (!adxl_values) {
-		adxl_component_count = 0;
-		return;
-	}
-
-	adxl_msg = kzalloc(MSG_SIZE, GFP_KERNEL);
-	if (!adxl_msg) {
-		adxl_component_count = 0;
-		kfree(adxl_values);
-	}
-
-	return;
-err:
-	skx_printk(KERN_ERR, "'%s' is not matched from DSM parameters: ",
-		   component_names[i]);
-	for (j = 0; names[j]; j++)
-		skx_printk(KERN_CONT, "%s ", names[j]);
-	skx_printk(KERN_CONT, "\n");
-}
-
-static void __exit skx_adxl_put(void)
-{
-	kfree(adxl_values);
-	kfree(adxl_msg);
-}
-
-/*
- * skx_init:
- *	make sure we are running on the correct cpu model
- *	search for all the devices we need
- *	check which DIMMs are present.
- */
-static int __init skx_init(void)
-{
-	const struct x86_cpu_id *id;
-	const struct munit *m;
-	const char *owner;
-	int rc = 0, i;
-	u8 mc = 0, src_id, node_id;
-	struct skx_dev *d;
-
-	edac_dbg(2, "\n");
-
-	owner = edac_get_owner();
-	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
-		return -EBUSY;
-
-	id = x86_match_cpu(skx_cpuids);
-	if (!id)
-		return -ENODEV;
-
-	rc = skx_get_hi_lo();
-	if (rc)
-		return rc;
-
-	rc = get_all_bus_mappings();
-	if (rc < 0)
-		goto fail;
-	if (rc == 0) {
-		edac_dbg(2, "No memory controllers found\n");
-		return -ENODEV;
-	}
-
-	for (m = skx_all_munits; m->did; m++) {
-		rc = get_all_munits(m);
-		if (rc < 0)
-			goto fail;
-		if (rc != m->per_socket * skx_num_sockets) {
-			edac_dbg(2, "Expected %d, got %d of 0x%x\n",
-				 m->per_socket * skx_num_sockets, rc, m->did);
-			rc = -ENODEV;
-			goto fail;
-		}
-	}
-
-	list_for_each_entry(d, &skx_edac_list, list) {
-		src_id = get_src_id(d);
-		node_id = skx_get_node_id(d);
-		edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id);
-		for (i = 0; i < NUM_IMC; i++) {
-			d->imc[i].mc = mc++;
-			d->imc[i].lmc = i;
-			d->imc[i].src_id = src_id;
-			d->imc[i].node_id = node_id;
-			rc = skx_register_mci(&d->imc[i]);
-			if (rc < 0)
-				goto fail;
-		}
-	}
-
-	skx_msg = kzalloc(MSG_SIZE, GFP_KERNEL);
-	if (!skx_msg) {
-		rc = -ENOMEM;
-		goto fail;
-	}
-
-	if (nvdimm_count)
-		skx_adxl_get();
-
-	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
-	opstate_init();
-
-	setup_skx_debug();
-
-	mce_register_decode_chain(&skx_mce_dec);
-
-	return 0;
-fail:
-	skx_remove();
-	return rc;
-}
-
-static void __exit skx_exit(void)
-{
-	edac_dbg(2, "\n");
-	mce_unregister_decode_chain(&skx_mce_dec);
-	teardown_skx_debug();
-	if (nvdimm_count)
-		skx_adxl_put();
-	kfree(skx_msg);
-	skx_remove();
-}
-
-module_init(skx_init);
-module_exit(skx_exit);
-
-module_param(edac_op_state, int, 0444);
-MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Tony Luck");
-MODULE_DESCRIPTION("MC Driver for Intel Skylake server processors");