Merge tag 'mmc-v4.4-rc1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.4 rc2.  It's based on a commit
  prior rc1 as I wanted to get them a bit more tested in next before
  sending you the pull request.

  MMC core:
   - Improve reliability when selecting HS200 mode
   - Improve reliability when selecting HS400 mode
   - mmc: remove bondage between REQ_META and reliable write

  MMC host:
   - pxamci: Fix read-only gpio detection polarity
   - mtk-sd: Preinitialize delay_phase to fix the case when delay is zero
   - android-goldfish: Fix build dependency by adding HAS_DMA
   - dw_mmc: Remove Seungwon Jeon from MAINTAINERS"

* tag 'mmc-v4.4-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: remove bondage between REQ_META and reliable write
  mmc: MMC_GOLDFISH should depend on HAS_DMA
  mmc: mediatek: Preinitialize delay_phase in get_best_delay()
  MAINTAINERS: mmc: Remove Seungwon Jeon from dw_mmc
  mmc: mmc: Improve reliability of mmc_select_hs400()
  mmc: mmc: Move mmc_switch_status()
  mmc: mmc: Fix HS setting in mmc_select_hs400()
  mmc: mmc: Improve reliability of mmc_select_hs200()
  mmc: pxamci: fix read-only gpio detection polarity

6 files changed, 75 insertions, 35 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index ea1751283b49..b16bffabe70a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9315,7 +9315,6 @@ F:	drivers/i2c/busses/i2c-designware-*
 F:	include/linux/platform_data/i2c-designware.h
 
 SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
-M:	Seungwon Jeon <tgih.jun@samsung.com>
 M:	Jaehoon Chung <jh80.chung@samsung.com>
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 23b6c8e8701c..d8486168415a 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -65,8 +65,7 @@ MODULE_ALIAS("mmc:block");
 #define MMC_SANITIZE_REQ_TIMEOUT 240000
 #define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16)
 
-#define mmc_req_rel_wr(req)	(((req->cmd_flags & REQ_FUA) || \
-				  (req->cmd_flags & REQ_META)) && \
+#define mmc_req_rel_wr(req)	((req->cmd_flags & REQ_FUA) && \
 				  (rq_data_dir(req) == WRITE))
 #define PACKED_CMD_VER	0x01
 #define PACKED_CMD_WR	0x02
@@ -1467,13 +1466,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 
 	/*
 	 * Reliable writes are used to implement Forced Unit Access and
-	 * REQ_META accesses, and are supported only on MMCs.
-	 *
-	 * XXX: this really needs a good explanation of why REQ_META
-	 * is treated special.
+	 * are supported only on MMCs.
 	 */
-	bool do_rel_wr = ((req->cmd_flags & REQ_FUA) ||
-			  (req->cmd_flags & REQ_META)) &&
+	bool do_rel_wr = (req->cmd_flags & REQ_FUA) &&
 		(rq_data_dir(req) == WRITE) &&
 		(md->flags & MMC_BLK_REL_WR);
 
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index c793fda27321..3a9a79ec4343 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1040,9 +1040,24 @@ static int mmc_select_hs_ddr(struct mmc_card *card)
 	return err;
 }
 
+/* Caller must hold re-tuning */
+static int mmc_switch_status(struct mmc_card *card)
+{
+	u32 status;
+	int err;
+
+	err = mmc_send_status(card, &status);
+	if (err)
+		return err;
+
+	return mmc_switch_status_error(card->host, status);
+}
+
 static int mmc_select_hs400(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
+	bool send_status = true;
+	unsigned int max_dtr;
 	int err = 0;
 	u8 val;
 
@@ -1053,25 +1068,36 @@ static int mmc_select_hs400(struct mmc_card *card)
 	      host->ios.bus_width == MMC_BUS_WIDTH_8))
 		return 0;
 
-	/*
-	 * Before switching to dual data rate operation for HS400,
-	 * it is required to convert from HS200 mode to HS mode.
-	 */
-	mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
-	mmc_set_bus_speed(card);
+	if (host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+		send_status = false;
 
+	/* Reduce frequency to HS frequency */
+	max_dtr = card->ext_csd.hs_max_dtr;
+	mmc_set_clock(host, max_dtr);
+
+	/* Switch card to HS mode */
 	val = EXT_CSD_TIMING_HS |
 	      card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			   EXT_CSD_HS_TIMING, val,
 			   card->ext_csd.generic_cmd6_time,
-			   true, true, true);
+			   true, send_status, true);
 	if (err) {
 		pr_err("%s: switch to high-speed from hs200 failed, err:%d\n",
 			mmc_hostname(host), err);
 		return err;
 	}
 
+	/* Set host controller to HS timing */
+	mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+
+	if (!send_status) {
+		err = mmc_switch_status(card);
+		if (err)
+			goto out_err;
+	}
+
+	/* Switch card to DDR */
 	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			 EXT_CSD_BUS_WIDTH,
 			 EXT_CSD_DDR_BUS_WIDTH_8,
@@ -1082,22 +1108,35 @@ static int mmc_select_hs400(struct mmc_card *card)
 		return err;
 	}
 
+	/* Switch card to HS400 */
 	val = EXT_CSD_TIMING_HS400 |
 	      card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			   EXT_CSD_HS_TIMING, val,
 			   card->ext_csd.generic_cmd6_time,
-			   true, true, true);
+			   true, send_status, true);
 	if (err) {
 		pr_err("%s: switch to hs400 failed, err:%d\n",
 			 mmc_hostname(host), err);
 		return err;
 	}
 
+	/* Set host controller to HS400 timing and frequency */
 	mmc_set_timing(host, MMC_TIMING_MMC_HS400);
 	mmc_set_bus_speed(card);
 
+	if (!send_status) {
+		err = mmc_switch_status(card);
+		if (err)
+			goto out_err;
+	}
+
 	return 0;
+
+out_err:
+	pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),
+	       __func__, err);
+	return err;
 }
 
 int mmc_hs200_to_hs400(struct mmc_card *card)
@@ -1105,19 +1144,6 @@ int mmc_hs200_to_hs400(struct mmc_card *card)
 	return mmc_select_hs400(card);
 }
 
-/* Caller must hold re-tuning */
-static int mmc_switch_status(struct mmc_card *card)
-{
-	u32 status;
-	int err;
-
-	err = mmc_send_status(card, &status);
-	if (err)
-		return err;
-
-	return mmc_switch_status_error(card->host, status);
-}
-
 int mmc_hs400_to_hs200(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
@@ -1219,6 +1245,8 @@ static void mmc_select_driver_type(struct mmc_card *card)
 static int mmc_select_hs200(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
+	bool send_status = true;
+	unsigned int old_timing;
 	int err = -EINVAL;
 	u8 val;
 
@@ -1234,6 +1262,9 @@ static int mmc_select_hs200(struct mmc_card *card)
 
 	mmc_select_driver_type(card);
 
+	if (host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+		send_status = false;
+
 	/*
 	 * Set the bus width(4 or 8) with host's support and
 	 * switch to HS200 mode if bus width is set successfully.
@@ -1245,11 +1276,25 @@ static int mmc_select_hs200(struct mmc_card *card)
 		err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 				   EXT_CSD_HS_TIMING, val,
 				   card->ext_csd.generic_cmd6_time,
-				   true, true, true);
-		if (!err)
-			mmc_set_timing(host, MMC_TIMING_MMC_HS200);
+				   true, send_status, true);
+		if (err)
+			goto err;
+		old_timing = host->ios.timing;
+		mmc_set_timing(host, MMC_TIMING_MMC_HS200);
+		if (!send_status) {
+			err = mmc_switch_status(card);
+			/*
+			 * mmc_select_timing() assumes timing has not changed if
+			 * it is a switch error.
+			 */
+			if (err == -EBADMSG)
+				mmc_set_timing(host, old_timing);
+		}
 	}
 err:
+	if (err)
+		pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),
+		       __func__, err);
 	return err;
 }
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index af71de5fda3b..1dee533634c9 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -473,6 +473,7 @@ config MMC_DAVINCI
 
 config MMC_GOLDFISH
 	tristate "goldfish qemu Multimedia Card Interface support"
+	depends on HAS_DMA
 	depends on GOLDFISH || COMPILE_TEST
 	help
 	  This selects the Goldfish Multimedia card Interface emulation
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 39568cc29a2a..33dfd7e72516 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1276,7 +1276,7 @@ static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay)
 	int start = 0, len = 0;
 	int start_final = 0, len_final = 0;
 	u8 final_phase = 0xff;
-	struct msdc_delay_phase delay_phase;
+	struct msdc_delay_phase delay_phase = { 0, };
 
 	if (delay == 0) {
 		dev_err(host->dev, "phase error: [map:%x]\n", delay);
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 8cadd74e8407..ce08896b9d69 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -805,7 +805,7 @@ static int pxamci_probe(struct platform_device *pdev)
 		goto out;
 	} else {
 		mmc->caps |= host->pdata->gpio_card_ro_invert ?
-			MMC_CAP2_RO_ACTIVE_HIGH : 0;
+			0 : MMC_CAP2_RO_ACTIVE_HIGH;
 	}
 
 	if (gpio_is_valid(gpio_cd))