Merge tag 'platform-drivers-x86-v4.10-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darrent Hart:
 "Introduce one new driver for Mellanox platforms. Add support for
  various new models to existing drivers via quirks, hotkeys, etc.
  Significant updates to intel_pmc_core in support of Kabylake and
  Sunrise Point PCH power management debug. Some cleanup and refactoring
  across various drivers.

  Detailed summary:

  dell-laptop:
   - Use brightness_set_blocking for kbd_led_level_set

  thinkpad_acpi:
   - Initialize local in_tablet_mode and type
   - Fix old style declaration GCC warning
   - Adding new hotkey ID for Lenovo thinkpad
   - Add support for X1 Yoga (2016) Tablet Mode
   - Move tablet detection into separate function

  asus-nb-wmi:
   - Add X45U quirk
   - Make use of dmi->ident

  asus-wmi:
   - Set specified XUSB2PR value for X550LB

  intel_mid_thermal:
   - Fix suspend handlers unused warning

  intel-vbtn:
   - Switch to use devm_input_allocate_device

  dell-wmi:
   - Add events created by Dell Rugged 2-in-1s
   - Adjust wifi catcher to emit KEY_WLAN

  intel_pmc_core:
   - Add KBL CPUID support
   - Add LTR IGNORE debug feature
   - Add MPHY PLL clock gating status
   - ModPhy core lanes pg status
   - Add PCH IP Power Gating Status
   - Fix PWRMBASE mask and mmio reg len

  acer-wmi:
   - Only supports AMW0_GUID1 on acer family

  mlx-platform:
   - Introduce support for Mellanox hotplug driver

  platform/x86:
   - Use ACPI_FAILURE at appropriate places"

* tag 'platform-drivers-x86-v4.10-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (22 commits)
  platform/x86: thinkpad_acpi: Initialize local in_tablet_mode and type
  platform/x86: dell-laptop: Use brightness_set_blocking for kbd_led_level_set
  platform/x86: thinkpad_acpi: Fix old style declaration GCC warning
  platform/x86: thinkpad_acpi: Adding new hotkey ID for Lenovo thinkpad
  platform/x86: thinkpad_acpi: Add support for X1 Yoga (2016) Tablet Mode
  platform/x86: thinkpad_acpi: Move tablet detection into separate function
  platform/x86: asus-nb-wmi.c: Add X45U quirk
  platform/x86: asus-nb-wmi: Make use of dmi->ident
  platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB
  platform/x86: intel_mid_thermal: Fix suspend handlers unused warning
  platform/x86: intel-vbtn: Switch to use devm_input_allocate_device
  platform/x86: Use ACPI_FAILURE at appropriate places
  platform/x86: dell-wmi: Add events created by Dell Rugged 2-in-1s
  platform/x86: dell-wmi: Adjust wifi catcher to emit KEY_WLAN
  platform/x86: intel_pmc_core: Add KBL CPUID support
  platform/x86: intel_pmc_core: Add LTR IGNORE debug feature
  platform/x86: intel_pmc_core: Add MPHY PLL clock gating status
  platform/x86: intel_pmc_core: ModPhy core lanes pg status
  platform/x86: intel_pmc_core: Add PCH IP Power Gating Status
  platform/x86: intel_pmc_core: Fix PWRMBASE mask and mmio reg len
  ...

20 files changed, 1346 insertions, 73 deletions

diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 72a150d8f3df..ba2e7d254842 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -540,6 +540,7 @@ Events that are propagated by the driver to userspace:
 0x6022		ALARM: a sensor is extremely hot
 0x6030		System thermal table changed
 0x6040		Nvidia Optimus/AC adapter related (TO BE VERIFIED)
+0x60C0		X1 Yoga 2016, Tablet mode status changed
 
 Battery nearly empty alarms are a last resort attempt to get the
 operating system to hibernate or shutdown cleanly (0x2313), or shutdown
diff --git a/MAINTAINERS b/MAINTAINERS
index 86f9583393ba..9d73040b846d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8045,6 +8045,13 @@ L:      platform-driver-x86@vger.kernel.org
 S:      Supported
 F:      arch/x86/platform/mellanox/mlx-platform.c
 
+MELLANOX MLX CPLD HOTPLUG DRIVER
+M:	Vadim Pasternak <vadimp@mellanox.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Supported
+F:	drivers/platform/x86/mlxcpld-hotplug.c
+F:	include/linux/platform_data/mlxcpld-hotplug.h
+
 SOFT-ROCE DRIVER (rxe)
 M:	Moni Shoua <monis@mellanox.com>
 L:	linux-rdma@vger.kernel.org
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index b8a21d7b25d4..185376901d9c 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1027,4 +1027,15 @@ config INTEL_TELEMETRY
 	  used to get various SoC events and parameters
 	  directly via debugfs files. Various tools may use
 	  this interface for SoC state monitoring.
+
+config MLX_CPLD_PLATFORM
+	tristate "Mellanox platform hotplug driver support"
+	default n
+	depends on MLX_PLATFORM
+	select HWMON
+	select I2C
+	---help---
+	  This driver handles hot-plug events for the power suppliers, power
+	  cables and fans on the wide range Mellanox IB and Ethernet systems.
+
 endif # X86_PLATFORM_DEVICES
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 2efa86d2a1a7..1f06b6339cf7 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -71,3 +71,4 @@ obj-$(CONFIG_INTEL_TELEMETRY)	+= intel_telemetry_core.o \
 				   intel_telemetry_pltdrv.o \
 				   intel_telemetry_debugfs.o
 obj-$(CONFIG_INTEL_PMC_CORE)    += intel_pmc_core.o
+obj-$(CONFIG_MLX_CPLD_PLATFORM)	+= mlxcpld-hotplug.o
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 79d64ea00bfb..a66192f692e3 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -355,6 +355,32 @@ static const struct dmi_system_id acer_blacklist[] __initconst = {
 	{}
 };
 
+static const struct dmi_system_id amw0_whitelist[] __initconst = {
+	{
+		.ident = "Acer",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+		},
+	},
+	{
+		.ident = "Gateway",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Gateway"),
+		},
+	},
+	{
+		.ident = "Packard Bell",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Packard Bell"),
+		},
+	},
+	{}
+};
+
+/*
+ * This quirk table is only for Acer/Gateway/Packard Bell family
+ * that those machines are supported by acer-wmi driver.
+ */
 static const struct dmi_system_id acer_quirks[] __initconst = {
 	{
 		.callback = dmi_matched,
@@ -464,6 +490,17 @@ static const struct dmi_system_id acer_quirks[] __initconst = {
 		},
 		.driver_data = &quirk_acer_travelmate_2490,
 	},
+	{}
+};
+
+/*
+ * This quirk list is for those non-acer machines that have AMW0_GUID1
+ * but supported by acer-wmi in past days. Keeping this quirk list here
+ * is only for backward compatible. Please do not add new machine to
+ * here anymore. Those non-acer machines should be supported by
+ * appropriate wmi drivers.
+ */
+static const struct dmi_system_id non_acer_quirks[] __initconst = {
 	{
 		.callback = dmi_matched,
 		.ident = "Fujitsu Siemens Amilo Li 1718",
@@ -598,6 +635,7 @@ static void __init find_quirks(void)
 {
 	if (!force_series) {
 		dmi_check_system(acer_quirks);
+		dmi_check_system(non_acer_quirks);
 	} else if (force_series == 2490) {
 		quirks = &quirk_acer_travelmate_2490;
 	}
@@ -2108,6 +2146,24 @@ static int __init acer_wmi_init(void)
 	find_quirks();
 
 	/*
+	 * The AMW0_GUID1 wmi is not only found on Acer family but also other
+	 * machines like Lenovo, Fujitsu and Medion. In the past days,
+	 * acer-wmi driver handled those non-Acer machines by quirks list.
+	 * But actually acer-wmi driver was loaded on any machines that have
+	 * AMW0_GUID1. This behavior is strange because those machines should
+	 * be supported by appropriate wmi drivers. e.g. fujitsu-laptop,
+	 * ideapad-laptop. So, here checks the machine that has AMW0_GUID1
+	 * should be in Acer/Gateway/Packard Bell white list, or it's already
+	 * in the past quirk list.
+	 */
+	if (wmi_has_guid(AMW0_GUID1) &&
+	    !dmi_check_system(amw0_whitelist) &&
+	    quirks == &quirk_unknown) {
+		pr_err("Unsupported machine has AMW0_GUID1, unable to load\n");
+		return -ENODEV;
+	}
+
+	/*
 	 * Detect which ACPI-WMI interface we're using.
 	 */
 	if (wmi_has_guid(AMW0_GUID1) && wmi_has_guid(WMID_GUID1))
diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 26e4cbc34db8..5be4783e40d4 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -116,8 +116,13 @@ static struct quirk_entry quirk_asus_ux303ub = {
 	.wmi_backlight_native = true,
 };
 
+static struct quirk_entry quirk_asus_x550lb = {
+	.xusb2pr = 0x01D9,
+};
+
 static int dmi_matched(const struct dmi_system_id *dmi)
 {
+	pr_info("Identified laptop model '%s'\n", dmi->ident);
 	quirks = dmi->driver_data;
 	return 1;
 }
@@ -175,6 +180,15 @@ static const struct dmi_system_id asus_quirks[] = {
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. X45U",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X45U"),
+		},
+		.driver_data = &quirk_asus_wapf4,
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "ASUSTeK COMPUTER INC. X456UA",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
@@ -398,6 +412,15 @@ static const struct dmi_system_id asus_quirks[] = {
 		},
 		.driver_data = &quirk_asus_ux303ub,
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. X550LB",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X550LB"),
+		},
+		.driver_data = &quirk_asus_x550lb,
+	},
 	{},
 };
 
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index ce6ca31a2d09..43cb680adbb4 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -156,6 +156,9 @@ MODULE_LICENSE("GPL");
 #define ASUS_FAN_CTRL_MANUAL		1
 #define ASUS_FAN_CTRL_AUTO		2
 
+#define USB_INTEL_XUSB2PR		0xD0
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+
 struct bios_args {
 	u32 arg0;
 	u32 arg1;
@@ -1080,6 +1083,29 @@ exit:
 	return result;
 }
 
+static void asus_wmi_set_xusb2pr(struct asus_wmi *asus)
+{
+	struct pci_dev *xhci_pdev;
+	u32 orig_ports_available;
+	u32 ports_available = asus->driver->quirks->xusb2pr;
+
+	xhci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+			PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI,
+			NULL);
+
+	if (!xhci_pdev)
+		return;
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+				&orig_ports_available);
+
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+				cpu_to_le32(ports_available));
+
+	pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n",
+			orig_ports_available, ports_available);
+}
+
 /*
  * Hwmon device
  */
@@ -2087,6 +2113,9 @@ static int asus_wmi_add(struct platform_device *pdev)
 	if (asus->driver->quirks->wmi_backlight_native)
 		acpi_video_set_dmi_backlight_type(acpi_backlight_native);
 
+	if (asus->driver->quirks->xusb2pr)
+		asus_wmi_set_xusb2pr(asus);
+
 	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		err = asus_wmi_backlight_init(asus);
 		if (err && err != -ENODEV)
diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h
index 0e19014e9f54..fdff626c3b51 100644
--- a/drivers/platform/x86/asus-wmi.h
+++ b/drivers/platform/x86/asus-wmi.h
@@ -53,6 +53,7 @@ struct quirk_entry {
 	 * and let the ACPI interrupt to send out the key event.
 	 */
 	int no_display_toggle;
+	u32 xusb2pr;
 
 	bool (*i8042_filter)(unsigned char data, unsigned char str,
 			     struct serio *serio);
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 2c2f02b2e08a..14392a01ab36 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -1904,38 +1904,40 @@ static enum led_brightness kbd_led_level_get(struct led_classdev *led_cdev)
 	return 0;
 }
 
-static void kbd_led_level_set(struct led_classdev *led_cdev,
-			      enum led_brightness value)
+static int kbd_led_level_set(struct led_classdev *led_cdev,
+			     enum led_brightness value)
 {
 	struct kbd_state state;
 	struct kbd_state new_state;
 	u16 num;
+	int ret;
 
 	if (kbd_get_max_level()) {
-		if (kbd_get_state(&state))
-			return;
+		ret = kbd_get_state(&state);
+		if (ret)
+			return ret;
 		new_state = state;
-		if (kbd_set_level(&new_state, value))
-			return;
-		kbd_set_state_safe(&new_state, &state);
-		return;
+		ret = kbd_set_level(&new_state, value);
+		if (ret)
+			return ret;
+		return kbd_set_state_safe(&new_state, &state);
 	}
 
 	if (kbd_get_valid_token_counts()) {
 		for (num = kbd_token_bits; num != 0 && value > 0; --value)
 			num &= num - 1; /* clear the first bit set */
 		if (num == 0)
-			return;
-		kbd_set_token_bit(ffs(num) - 1);
-		return;
+			return 0;
+		return kbd_set_token_bit(ffs(num) - 1);
 	}
 
 	pr_warn("Keyboard brightness level control not supported\n");
+	return -ENXIO;
 }
 
 static struct led_classdev kbd_led = {
 	.name           = "dell::kbd_backlight",
-	.brightness_set = kbd_led_level_set,
+	.brightness_set_blocking = kbd_led_level_set,
 	.brightness_get = kbd_led_level_get,
 	.groups         = kbd_led_groups,
 };
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index da2fe18162e1..75e637047d36 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -114,7 +114,7 @@ static const struct key_entry dell_wmi_keymap_type_0000[] __initconst = {
 	{ KE_IGNORE, 0xe00e, { KEY_RESERVED } },
 
 	/* Wifi Catcher */
-	{ KE_KEY,    0xe011, { KEY_PROG2 } },
+	{ KE_KEY,    0xe011, { KEY_WLAN } },
 
 	/* Ambient light sensor toggle */
 	{ KE_IGNORE, 0xe013, { KEY_RESERVED } },
@@ -274,6 +274,16 @@ static const struct key_entry dell_wmi_keymap_type_0010[] __initconst = {
 
 	/* Stealth mode toggle */
 	{ KE_IGNORE, 0x155, { KEY_RESERVED } },
+
+	/* Rugged magnetic dock attach/detach events */
+	{ KE_IGNORE, 0x156, { KEY_RESERVED } },
+	{ KE_IGNORE, 0x157, { KEY_RESERVED } },
+
+	/* Rugged programmable (P1/P2/P3 keys) */
+	{ KE_KEY,    0x850, { KEY_PROG1 } },
+	{ KE_KEY,    0x851, { KEY_PROG2 } },
+	{ KE_KEY,    0x852, { KEY_PROG3 } },
+
 };
 
 /*
diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c
index 12dbb5063376..cb3ab2b212b1 100644
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c
@@ -69,7 +69,7 @@ static int intel_hid_set_enable(struct device *device, int enable)
 
 	arg0.integer.value = enable;
 	status = acpi_evaluate_object(ACPI_HANDLE(device), "HDSM", &args, NULL);
-	if (!ACPI_SUCCESS(status)) {
+	if (ACPI_FAILURE(status)) {
 		dev_warn(device, "failed to %sable hotkeys\n",
 			 enable ? "en" : "dis");
 		return -EIO;
@@ -148,7 +148,7 @@ static void notify_handler(acpi_handle handle, u32 event, void *context)
 	}
 
 	status = acpi_evaluate_integer(handle, "HDEM", NULL, &ev_index);
-	if (!ACPI_SUCCESS(status)) {
+	if (ACPI_FAILURE(status)) {
 		dev_warn(&device->dev, "failed to get event index\n");
 		return;
 	}
@@ -167,7 +167,7 @@ static int intel_hid_probe(struct platform_device *device)
 	int err;
 
 	status = acpi_evaluate_integer(handle, "HDMM", NULL, &mode);
-	if (!ACPI_SUCCESS(status)) {
+	if (ACPI_FAILURE(status)) {
 		dev_warn(&device->dev, "failed to read mode\n");
 		return -ENODEV;
 	}
diff --git a/drivers/platform/x86/intel-smartconnect.c b/drivers/platform/x86/intel-smartconnect.c
index 04cf5dffdfd9..bbe4c06c769f 100644
--- a/drivers/platform/x86/intel-smartconnect.c
+++ b/drivers/platform/x86/intel-smartconnect.c
@@ -29,7 +29,7 @@ static int smartconnect_acpi_init(struct acpi_device *acpi)
 	acpi_status status;
 
 	status = acpi_evaluate_integer(acpi->handle, "GAOS", NULL, &value);
-	if (!ACPI_SUCCESS(status))
+	if (ACPI_FAILURE(status))
 		return -EINVAL;
 
 	if (value & 0x1) {
diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 78080763df51..554e82ebe83c 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -49,34 +49,19 @@ static int intel_vbtn_input_setup(struct platform_device *device)
 	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
 	int ret;
 
-	priv->input_dev = input_allocate_device();
+	priv->input_dev = devm_input_allocate_device(&device->dev);
 	if (!priv->input_dev)
 		return -ENOMEM;
 
 	ret = sparse_keymap_setup(priv->input_dev, intel_vbtn_keymap, NULL);
 	if (ret)
-		goto err_free_device;
+		return ret;
 
 	priv->input_dev->dev.parent = &device->dev;
 	priv->input_dev->name = "Intel Virtual Button driver";
 	priv->input_dev->id.bustype = BUS_HOST;
 
-	ret = input_register_device(priv->input_dev);
-	if (ret)
-		goto err_free_device;
-
-	return 0;
-
-err_free_device:
-	input_free_device(priv->input_dev);
-	return ret;
-}
-
-static void intel_vbtn_input_destroy(struct platform_device *device)
-{
-	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
-
-	input_unregister_device(priv->input_dev);
+	return input_register_device(priv->input_dev);
 }
 
 static void notify_handler(acpi_handle handle, u32 event, void *context)
@@ -97,7 +82,7 @@ static int intel_vbtn_probe(struct platform_device *device)
 	int err;
 
 	status = acpi_evaluate_object(handle, "VBDL", NULL, NULL);
-	if (!ACPI_SUCCESS(status)) {
+	if (ACPI_FAILURE(status)) {
 		dev_warn(&device->dev, "failed to read Intel Virtual Button driver\n");
 		return -ENODEV;
 	}
@@ -117,24 +102,16 @@ static int intel_vbtn_probe(struct platform_device *device)
 					     ACPI_DEVICE_NOTIFY,
 					     notify_handler,
 					     device);
-	if (ACPI_FAILURE(status)) {
-		err = -EBUSY;
-		goto err_remove_input;
-	}
+	if (ACPI_FAILURE(status))
+		return -EBUSY;
 
 	return 0;
-
-err_remove_input:
-	intel_vbtn_input_destroy(device);
-
-	return err;
 }
 
 static int intel_vbtn_remove(struct platform_device *device)
 {
 	acpi_handle handle = ACPI_HANDLE(&device->dev);
 
-	intel_vbtn_input_destroy(device);
 	acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler);
 
 	/*
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index 9f713b832ba3..0df3c9d37509 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -415,6 +415,7 @@ static struct thermal_device_info *initialize_sensor(int index)
 	return td_info;
 }
 
+#ifdef CONFIG_PM_SLEEP
 /**
  * mid_thermal_resume - resume routine
  * @dev: device structure
@@ -442,6 +443,7 @@ static int mid_thermal_suspend(struct device *dev)
 	 */
 	return configure_adc(0);
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(mid_thermal_pm,
 			 mid_thermal_suspend, mid_thermal_resume);
diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index e8b1b836ca2d..b130b8c9b9d7 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -19,10 +19,12 @@
  */
 
 #include <linux/debugfs.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/pci.h>
+#include <linux/uaccess.h>
 
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
@@ -32,16 +34,106 @@
 
 static struct pmc_dev pmc;
 
+static const struct pmc_bit_map spt_pll_map[] = {
+	{"MIPI PLL",			SPT_PMC_BIT_MPHY_CMN_LANE0},
+	{"GEN2 USB2PCIE2 PLL",		SPT_PMC_BIT_MPHY_CMN_LANE1},
+	{"DMIPCIE3 PLL",		SPT_PMC_BIT_MPHY_CMN_LANE2},
+	{"SATA PLL",			SPT_PMC_BIT_MPHY_CMN_LANE3},
+	{},
+};
+
+static const struct pmc_bit_map spt_mphy_map[] = {
+	{"MPHY CORE LANE 0",           SPT_PMC_BIT_MPHY_LANE0},
+	{"MPHY CORE LANE 1",           SPT_PMC_BIT_MPHY_LANE1},
+	{"MPHY CORE LANE 2",           SPT_PMC_BIT_MPHY_LANE2},
+	{"MPHY CORE LANE 3",           SPT_PMC_BIT_MPHY_LANE3},
+	{"MPHY CORE LANE 4",           SPT_PMC_BIT_MPHY_LANE4},
+	{"MPHY CORE LANE 5",           SPT_PMC_BIT_MPHY_LANE5},
+	{"MPHY CORE LANE 6",           SPT_PMC_BIT_MPHY_LANE6},
+	{"MPHY CORE LANE 7",           SPT_PMC_BIT_MPHY_LANE7},
+	{"MPHY CORE LANE 8",           SPT_PMC_BIT_MPHY_LANE8},
+	{"MPHY CORE LANE 9",           SPT_PMC_BIT_MPHY_LANE9},
+	{"MPHY CORE LANE 10",          SPT_PMC_BIT_MPHY_LANE10},
+	{"MPHY CORE LANE 11",          SPT_PMC_BIT_MPHY_LANE11},
+	{"MPHY CORE LANE 12",          SPT_PMC_BIT_MPHY_LANE12},
+	{"MPHY CORE LANE 13",          SPT_PMC_BIT_MPHY_LANE13},
+	{"MPHY CORE LANE 14",          SPT_PMC_BIT_MPHY_LANE14},
+	{"MPHY CORE LANE 15",          SPT_PMC_BIT_MPHY_LANE15},
+	{},
+};
+
+static const struct pmc_bit_map spt_pfear_map[] = {
+	{"PMC",				SPT_PMC_BIT_PMC},
+	{"OPI-DMI",			SPT_PMC_BIT_OPI},
+	{"SPI / eSPI",			SPT_PMC_BIT_SPI},
+	{"XHCI",			SPT_PMC_BIT_XHCI},
+	{"SPA",				SPT_PMC_BIT_SPA},
+	{"SPB",				SPT_PMC_BIT_SPB},
+	{"SPC",				SPT_PMC_BIT_SPC},
+	{"GBE",				SPT_PMC_BIT_GBE},
+	{"SATA",			SPT_PMC_BIT_SATA},
+	{"HDA-PGD0",			SPT_PMC_BIT_HDA_PGD0},
+	{"HDA-PGD1",			SPT_PMC_BIT_HDA_PGD1},
+	{"HDA-PGD2",			SPT_PMC_BIT_HDA_PGD2},
+	{"HDA-PGD3",			SPT_PMC_BIT_HDA_PGD3},
+	{"RSVD",			SPT_PMC_BIT_RSVD_0B},
+	{"LPSS",			SPT_PMC_BIT_LPSS},
+	{"LPC",				SPT_PMC_BIT_LPC},
+	{"SMB",				SPT_PMC_BIT_SMB},
+	{"ISH",				SPT_PMC_BIT_ISH},
+	{"P2SB",			SPT_PMC_BIT_P2SB},
+	{"DFX",				SPT_PMC_BIT_DFX},
+	{"SCC",				SPT_PMC_BIT_SCC},
+	{"RSVD",			SPT_PMC_BIT_RSVD_0C},
+	{"FUSE",			SPT_PMC_BIT_FUSE},
+	{"CAMERA",			SPT_PMC_BIT_CAMREA},
+	{"RSVD",			SPT_PMC_BIT_RSVD_0D},
+	{"USB3-OTG",			SPT_PMC_BIT_USB3_OTG},
+	{"EXI",				SPT_PMC_BIT_EXI},
+	{"CSE",				SPT_PMC_BIT_CSE},
+	{"CSME_KVM",			SPT_PMC_BIT_CSME_KVM},
+	{"CSME_PMT",			SPT_PMC_BIT_CSME_PMT},
+	{"CSME_CLINK",			SPT_PMC_BIT_CSME_CLINK},
+	{"CSME_PTIO",			SPT_PMC_BIT_CSME_PTIO},
+	{"CSME_USBR",			SPT_PMC_BIT_CSME_USBR},
+	{"CSME_SUSRAM",			SPT_PMC_BIT_CSME_SUSRAM},
+	{"CSME_SMT",			SPT_PMC_BIT_CSME_SMT},
+	{"RSVD",			SPT_PMC_BIT_RSVD_1A},
+	{"CSME_SMS2",			SPT_PMC_BIT_CSME_SMS2},
+	{"CSME_SMS1",			SPT_PMC_BIT_CSME_SMS1},
+	{"CSME_RTC",			SPT_PMC_BIT_CSME_RTC},
+	{"CSME_PSF",			SPT_PMC_BIT_CSME_PSF},
+	{},
+};
+
+static const struct pmc_reg_map spt_reg_map = {
+	.pfear_sts = spt_pfear_map,
+	.mphy_sts = spt_mphy_map,
+	.pll_sts = spt_pll_map,
+};
+
 static const struct pci_device_id pmc_pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID), (kernel_ulong_t)NULL },
+	{ PCI_VDEVICE(INTEL, SPT_PMC_PCI_DEVICE_ID),
+					(kernel_ulong_t)&spt_reg_map },
 	{ 0, },
 };
 
+static inline u8 pmc_core_reg_read_byte(struct pmc_dev *pmcdev, int offset)
+{
+	return readb(pmcdev->regbase + offset);
+}
+
 static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
 {
 	return readl(pmcdev->regbase + reg_offset);
 }
 
+static inline void pmc_core_reg_write(struct pmc_dev *pmcdev, int
+							reg_offset, u32 val)
+{
+	writel(val, pmcdev->regbase + reg_offset);
+}
+
 static inline u32 pmc_core_adjust_slp_s0_step(u32 value)
 {
 	return value * SPT_PMC_SLP_S0_RES_COUNTER_STEP;
@@ -90,6 +182,245 @@ static int pmc_core_dev_state_get(void *data, u64 *val)
 
 DEFINE_DEBUGFS_ATTRIBUTE(pmc_core_dev_state, pmc_core_dev_state_get, NULL, "%llu\n");
 
+static int pmc_core_check_read_lock_bit(void)
+{
+	struct pmc_dev *pmcdev = &pmc;
+	u32 value;
+
+	value = pmc_core_reg_read(pmcdev, SPT_PMC_PM_CFG_OFFSET);
+	return test_bit(SPT_PMC_READ_DISABLE_BIT,
+			(unsigned long *)&value);
+}
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+static void pmc_core_display_map(struct seq_file *s, int index,
+				 u8 pf_reg, const struct pmc_bit_map *pf_map)
+{
+	seq_printf(s, "PCH IP: %-2d - %-32s\tState: %s\n",
+		   index, pf_map[index].name,
+		   pf_map[index].bit_mask & pf_reg ? "Off" : "On");
+}
+
+static int pmc_core_ppfear_sts_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map *map = pmcdev->map->pfear_sts;
+	u8 pf_regs[NUM_ENTRIES];
+	int index, iter;
+
+	iter = SPT_PMC_XRAM_PPFEAR0A;
+
+	for (index = 0; index < NUM_ENTRIES; index++, iter++)
+		pf_regs[index] = pmc_core_reg_read_byte(pmcdev, iter);
+
+	for (index = 0; map[index].name; index++)
+		pmc_core_display_map(s, index, pf_regs[index / 8], map);
+
+	return 0;
+}
+
+static int pmc_core_ppfear_sts_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmc_core_ppfear_sts_show, inode->i_private);
+}
+
+static const struct file_operations pmc_core_ppfear_ops = {
+	.open           = pmc_core_ppfear_sts_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+/* This function should return link status, 0 means ready */
+static int pmc_core_mtpmc_link_status(void)
+{
+	struct pmc_dev *pmcdev = &pmc;
+	u32 value;
+
+	value = pmc_core_reg_read(pmcdev, SPT_PMC_PM_STS_OFFSET);
+	return test_bit(SPT_PMC_MSG_FULL_STS_BIT,
+			(unsigned long *)&value);
+}
+
+static int pmc_core_send_msg(u32 *addr_xram)
+{
+	struct pmc_dev *pmcdev = &pmc;
+	u32 dest;
+	int timeout;
+
+	for (timeout = NUM_RETRIES; timeout > 0; timeout--) {
+		if (pmc_core_mtpmc_link_status() == 0)
+			break;
+		msleep(5);
+	}
+
+	if (timeout <= 0 && pmc_core_mtpmc_link_status())
+		return -EBUSY;
+
+	dest = (*addr_xram & MTPMC_MASK) | (1U << 1);
+	pmc_core_reg_write(pmcdev, SPT_PMC_MTPMC_OFFSET, dest);
+	return 0;
+}
+
+static int pmc_core_mphy_pg_sts_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map *map = pmcdev->map->mphy_sts;
+	u32 mphy_core_reg_low, mphy_core_reg_high;
+	u32 val_low, val_high;
+	int index, err = 0;
+
+	if (pmcdev->pmc_xram_read_bit) {
+		seq_puts(s, "Access denied: please disable PMC_READ_DISABLE setting in BIOS.");
+		return 0;
+	}
+
+	mphy_core_reg_low  = (SPT_PMC_MPHY_CORE_STS_0 << 16);
+	mphy_core_reg_high = (SPT_PMC_MPHY_CORE_STS_1 << 16);
+
+	mutex_lock(&pmcdev->lock);
+
+	if (pmc_core_send_msg(&mphy_core_reg_low) != 0) {
+		err = -EBUSY;
+		goto out_unlock;
+	}
+
+	msleep(10);
+	val_low = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET);
+
+	if (pmc_core_send_msg(&mphy_core_reg_high) != 0) {
+		err = -EBUSY;
+		goto out_unlock;
+	}
+
+	msleep(10);
+	val_high = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET);
+
+	for (index = 0; map[index].name && index < 8; index++) {
+		seq_printf(s, "%-32s\tState: %s\n",
+			   map[index].name,
+			   map[index].bit_mask & val_low ? "Not power gated" :
+			   "Power gated");
+	}
+
+	for (index = 8; map[index].name; index++) {
+		seq_printf(s, "%-32s\tState: %s\n",
+			   map[index].name,
+			   map[index].bit_mask & val_high ? "Not power gated" :
+			   "Power gated");
+	}
+
+out_unlock:
+	mutex_unlock(&pmcdev->lock);
+	return err;
+}
+
+static int pmc_core_mphy_pg_sts_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmc_core_mphy_pg_sts_show, inode->i_private);
+}
+
+static const struct file_operations pmc_core_mphy_pg_ops = {
+	.open           = pmc_core_mphy_pg_sts_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static int pmc_core_pll_show(struct seq_file *s, void *unused)
+{
+	struct pmc_dev *pmcdev = s->private;
+	const struct pmc_bit_map *map = pmcdev->map->pll_sts;
+	u32 mphy_common_reg, val;
+	int index, err = 0;
+
+	if (pmcdev->pmc_xram_read_bit) {
+		seq_puts(s, "Access denied: please disable PMC_READ_DISABLE setting in BIOS.");
+		return 0;
+	}
+
+	mphy_common_reg  = (SPT_PMC_MPHY_COM_STS_0 << 16);
+	mutex_lock(&pmcdev->lock);
+
+	if (pmc_core_send_msg(&mphy_common_reg) != 0) {
+		err = -EBUSY;
+		goto out_unlock;
+	}
+
+	/* Observed PMC HW response latency for MTPMC-MFPMC is ~10 ms */
+	msleep(10);
+	val = pmc_core_reg_read(pmcdev, SPT_PMC_MFPMC_OFFSET);
+
+	for (index = 0; map[index].name ; index++) {
+		seq_printf(s, "%-32s\tState: %s\n",
+			   map[index].name,
+			   map[index].bit_mask & val ? "Active" : "Idle");
+	}
+
+out_unlock:
+	mutex_unlock(&pmcdev->lock);
+	return err;
+}
+
+static int pmc_core_pll_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmc_core_pll_show, inode->i_private);
+}
+
+static const struct file_operations pmc_core_pll_ops = {
+	.open           = pmc_core_pll_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static ssize_t pmc_core_ltr_ignore_write(struct file *file, const char __user
+*userbuf, size_t count, loff_t *ppos)
+{
+	struct pmc_dev *pmcdev = &pmc;
+	u32 val, buf_size, fd;
+	int err = 0;
+
+	buf_size = count < 64 ? count : 64;
+	mutex_lock(&pmcdev->lock);
+
+	if (kstrtou32_from_user(userbuf, buf_size, 10, &val)) {
+		err = -EFAULT;
+		goto out_unlock;
+	}
+
+	if (val > NUM_IP_IGN_ALLOWED) {
+		err = -EINVAL;
+		goto out_unlock;
+	}
+
+	fd = pmc_core_reg_read(pmcdev, SPT_PMC_LTR_IGNORE_OFFSET);
+	fd |= (1U << val);
+	pmc_core_reg_write(pmcdev, SPT_PMC_LTR_IGNORE_OFFSET, fd);
+
+out_unlock:
+	mutex_unlock(&pmcdev->lock);
+	return err == 0 ? count : err;
+}
+
+static int pmc_core_ltr_ignore_show(struct seq_file *s, void *unused)
+{
+	return 0;
+}
+
+static int pmc_core_ltr_ignore_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmc_core_ltr_ignore_show, inode->i_private);
+}
+
+static const struct file_operations pmc_core_ltr_ignore_ops = {
+	.open           = pmc_core_ltr_ignore_open,
+	.read           = seq_read,
+	.write          = pmc_core_ltr_ignore_write,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
 static void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
 {
 	debugfs_remove_recursive(pmcdev->dbgfs_dir);
@@ -106,20 +437,59 @@ static int pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
 	pmcdev->dbgfs_dir = dir;
 	file = debugfs_create_file("slp_s0_residency_usec", S_IFREG | S_IRUGO,
 				   dir, pmcdev, &pmc_core_dev_state);
+	if (!file)
+		goto err;
 
-	if (!file) {
-		pmc_core_dbgfs_unregister(pmcdev);
-		return -ENODEV;
-	}
+	file = debugfs_create_file("pch_ip_power_gating_status",
+				   S_IFREG | S_IRUGO, dir, pmcdev,
+				   &pmc_core_ppfear_ops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("mphy_core_lanes_power_gating_status",
+				   S_IFREG | S_IRUGO, dir, pmcdev,
+				   &pmc_core_mphy_pg_ops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("pll_status",
+				   S_IFREG | S_IRUGO, dir, pmcdev,
+				   &pmc_core_pll_ops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("ltr_ignore",
+				   S_IFREG | S_IRUGO, dir, pmcdev,
+				   &pmc_core_ltr_ignore_ops);
+
+	if (!file)
+		goto err;
 
 	return 0;
+err:
+	pmc_core_dbgfs_unregister(pmcdev);
+	return -ENODEV;
 }
+#else
+static inline int pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
+{
+	return 0;
+}
+
+static inline void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
 
 static const struct x86_cpu_id intel_pmc_core_ids[] = {
 	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_MOBILE, X86_FEATURE_MWAIT,
 		(kernel_ulong_t)NULL},
 	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_DESKTOP, X86_FEATURE_MWAIT,
 		(kernel_ulong_t)NULL},
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_KABYLAKE_MOBILE, X86_FEATURE_MWAIT,
+		(kernel_ulong_t)NULL},
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_KABYLAKE_DESKTOP, X86_FEATURE_MWAIT,
+		(kernel_ulong_t)NULL},
 	{}
 };
 
@@ -128,6 +498,7 @@ static int pmc_core_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	struct device *ptr_dev = &dev->dev;
 	struct pmc_dev *pmcdev = &pmc;
 	const struct x86_cpu_id *cpu_id;
+	const struct pmc_reg_map *map = (struct pmc_reg_map *)id->driver_data;
 	int err;
 
 	cpu_id = x86_match_cpu(intel_pmc_core_ids);
@@ -149,6 +520,7 @@ static int pmc_core_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		dev_dbg(&dev->dev, "PMC Core: failed to read PCI config space.\n");
 		return err;
 	}
+	pmcdev->base_addr &= PMC_BASE_ADDR_MASK;
 	dev_dbg(&dev->dev, "PMC Core: PWRMBASE is %#x\n", pmcdev->base_addr);
 
 	pmcdev->regbase = devm_ioremap_nocache(ptr_dev,
@@ -159,6 +531,10 @@ static int pmc_core_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENOMEM;
 	}
 
+	mutex_init(&pmcdev->lock);
+	pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit();
+	pmcdev->map = map;
+
 	err = pmc_core_dbgfs_register(pmcdev);
 	if (err < 0)
 		dev_warn(&dev->dev, "PMC Core: debugfs register failed.\n");
diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel_pmc_core.h
index e3f671f4d122..5a48e7728479 100644
--- a/drivers/platform/x86/intel_pmc_core.h
+++ b/drivers/platform/x86/intel_pmc_core.h
@@ -26,8 +26,111 @@
 
 #define SPT_PMC_BASE_ADDR_OFFSET		0x48
 #define SPT_PMC_SLP_S0_RES_COUNTER_OFFSET	0x13c
-#define SPT_PMC_MMIO_REG_LEN			0x100
+#define SPT_PMC_PM_CFG_OFFSET			0x18
+#define SPT_PMC_PM_STS_OFFSET			0x1c
+#define SPT_PMC_MTPMC_OFFSET			0x20
+#define SPT_PMC_MFPMC_OFFSET			0x38
+#define SPT_PMC_LTR_IGNORE_OFFSET		0x30C
+#define SPT_PMC_MPHY_CORE_STS_0			0x1143
+#define SPT_PMC_MPHY_CORE_STS_1			0x1142
+#define SPT_PMC_MPHY_COM_STS_0			0x1155
+#define SPT_PMC_MMIO_REG_LEN			0x1000
 #define SPT_PMC_SLP_S0_RES_COUNTER_STEP		0x64
+#define PMC_BASE_ADDR_MASK			~(SPT_PMC_MMIO_REG_LEN - 1)
+#define MTPMC_MASK				0xffff0000
+#define NUM_ENTRIES				5
+#define SPT_PMC_READ_DISABLE_BIT		0x16
+#define SPT_PMC_MSG_FULL_STS_BIT		0x18
+#define NUM_RETRIES				100
+#define NUM_IP_IGN_ALLOWED			17
+
+/* Sunrise Point: PGD PFET Enable Ack Status Registers */
+enum ppfear_regs {
+	SPT_PMC_XRAM_PPFEAR0A = 0x590,
+	SPT_PMC_XRAM_PPFEAR0B,
+	SPT_PMC_XRAM_PPFEAR0C,
+	SPT_PMC_XRAM_PPFEAR0D,
+	SPT_PMC_XRAM_PPFEAR1A,
+};
+
+#define SPT_PMC_BIT_PMC				BIT(0)
+#define SPT_PMC_BIT_OPI				BIT(1)
+#define SPT_PMC_BIT_SPI				BIT(2)
+#define SPT_PMC_BIT_XHCI			BIT(3)
+#define SPT_PMC_BIT_SPA				BIT(4)
+#define SPT_PMC_BIT_SPB				BIT(5)
+#define SPT_PMC_BIT_SPC				BIT(6)
+#define SPT_PMC_BIT_GBE				BIT(7)
+
+#define SPT_PMC_BIT_SATA			BIT(0)
+#define SPT_PMC_BIT_HDA_PGD0			BIT(1)
+#define SPT_PMC_BIT_HDA_PGD1			BIT(2)
+#define SPT_PMC_BIT_HDA_PGD2			BIT(3)
+#define SPT_PMC_BIT_HDA_PGD3			BIT(4)
+#define SPT_PMC_BIT_RSVD_0B			BIT(5)
+#define SPT_PMC_BIT_LPSS			BIT(6)
+#define SPT_PMC_BIT_LPC				BIT(7)
+
+#define SPT_PMC_BIT_SMB				BIT(0)
+#define SPT_PMC_BIT_ISH				BIT(1)
+#define SPT_PMC_BIT_P2SB			BIT(2)
+#define SPT_PMC_BIT_DFX				BIT(3)
+#define SPT_PMC_BIT_SCC				BIT(4)
+#define SPT_PMC_BIT_RSVD_0C			BIT(5)
+#define SPT_PMC_BIT_FUSE			BIT(6)
+#define SPT_PMC_BIT_CAMREA			BIT(7)
+
+#define SPT_PMC_BIT_RSVD_0D			BIT(0)
+#define SPT_PMC_BIT_USB3_OTG			BIT(1)
+#define SPT_PMC_BIT_EXI				BIT(2)
+#define SPT_PMC_BIT_CSE				BIT(3)
+#define SPT_PMC_BIT_CSME_KVM			BIT(4)
+#define SPT_PMC_BIT_CSME_PMT			BIT(5)
+#define SPT_PMC_BIT_CSME_CLINK			BIT(6)
+#define SPT_PMC_BIT_CSME_PTIO			BIT(7)
+
+#define SPT_PMC_BIT_CSME_USBR			BIT(0)
+#define SPT_PMC_BIT_CSME_SUSRAM			BIT(1)
+#define SPT_PMC_BIT_CSME_SMT			BIT(2)
+#define SPT_PMC_BIT_RSVD_1A			BIT(3)
+#define SPT_PMC_BIT_CSME_SMS2			BIT(4)
+#define SPT_PMC_BIT_CSME_SMS1			BIT(5)
+#define SPT_PMC_BIT_CSME_RTC			BIT(6)
+#define SPT_PMC_BIT_CSME_PSF			BIT(7)
+
+#define SPT_PMC_BIT_MPHY_LANE0			BIT(0)
+#define SPT_PMC_BIT_MPHY_LANE1			BIT(1)
+#define SPT_PMC_BIT_MPHY_LANE2			BIT(2)
+#define SPT_PMC_BIT_MPHY_LANE3			BIT(3)
+#define SPT_PMC_BIT_MPHY_LANE4			BIT(4)
+#define SPT_PMC_BIT_MPHY_LANE5			BIT(5)
+#define SPT_PMC_BIT_MPHY_LANE6			BIT(6)
+#define SPT_PMC_BIT_MPHY_LANE7			BIT(7)
+
+#define SPT_PMC_BIT_MPHY_LANE8			BIT(0)
+#define SPT_PMC_BIT_MPHY_LANE9			BIT(1)
+#define SPT_PMC_BIT_MPHY_LANE10			BIT(2)
+#define SPT_PMC_BIT_MPHY_LANE11			BIT(3)
+#define SPT_PMC_BIT_MPHY_LANE12			BIT(4)
+#define SPT_PMC_BIT_MPHY_LANE13			BIT(5)
+#define SPT_PMC_BIT_MPHY_LANE14			BIT(6)
+#define SPT_PMC_BIT_MPHY_LANE15			BIT(7)
+
+#define SPT_PMC_BIT_MPHY_CMN_LANE0		BIT(0)
+#define SPT_PMC_BIT_MPHY_CMN_LANE1		BIT(1)
+#define SPT_PMC_BIT_MPHY_CMN_LANE2		BIT(2)
+#define SPT_PMC_BIT_MPHY_CMN_LANE3		BIT(3)
+
+struct pmc_bit_map {
+	const char *name;
+	u32 bit_mask;
+};
+
+struct pmc_reg_map {
+	const struct pmc_bit_map *pfear_sts;
+	const struct pmc_bit_map *mphy_sts;
+	const struct pmc_bit_map *pll_sts;
+};
 
 /**
  * struct pmc_dev - pmc device structure
@@ -43,8 +146,13 @@
 struct pmc_dev {
 	u32 base_addr;
 	void __iomem *regbase;
+	const struct pmc_reg_map *map;
+#if IS_ENABLED(CONFIG_DEBUG_FS)
 	struct dentry *dbgfs_dir;
+#endif /* CONFIG_DEBUG_FS */
 	bool has_slp_s0_res;
+	int pmc_xram_read_bit;
+	struct mutex lock; /* generic mutex lock for PMC Core */
 };
 
 #endif /* PMC_CORE_H */
diff --git a/drivers/platform/x86/mlxcpld-hotplug.c b/drivers/platform/x86/mlxcpld-hotplug.c
new file mode 100644
index 000000000000..aff3686b3b37
--- /dev/null
+++ b/drivers/platform/x86/mlxcpld-hotplug.c
@@ -0,0 +1,515 @@
+/*
+ * drivers/platform/x86/mlxcpld-hotplug.c
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_data/mlxcpld-hotplug.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+/* Offset of event and mask registers from status register */
+#define MLXCPLD_HOTPLUG_EVENT_OFF	1
+#define MLXCPLD_HOTPLUG_MASK_OFF	2
+#define MLXCPLD_HOTPLUG_AGGR_MASK_OFF	1
+
+#define MLXCPLD_HOTPLUG_ATTRS_NUM	8
+
+/**
+ * enum mlxcpld_hotplug_attr_type - sysfs attributes for hotplug events:
+ * @MLXCPLD_HOTPLUG_ATTR_TYPE_PSU: power supply unit attribute;
+ * @MLXCPLD_HOTPLUG_ATTR_TYPE_PWR: power cable attribute;
+ * @MLXCPLD_HOTPLUG_ATTR_TYPE_FAN: FAN drawer attribute;
+ */
+enum mlxcpld_hotplug_attr_type {
+	MLXCPLD_HOTPLUG_ATTR_TYPE_PSU,
+	MLXCPLD_HOTPLUG_ATTR_TYPE_PWR,
+	MLXCPLD_HOTPLUG_ATTR_TYPE_FAN,
+};
+
+/**
+ * struct mlxcpld_hotplug_priv_data - platform private data:
+ * @irq: platform interrupt number;
+ * @pdev: platform device;
+ * @plat: platform data;
+ * @hwmon: hwmon device;
+ * @mlxcpld_hotplug_attr: sysfs attributes array;
+ * @mlxcpld_hotplug_dev_attr: sysfs sensor device attribute array;
+ * @group: sysfs attribute group;
+ * @groups: list of sysfs attribute group for hwmon registration;
+ * @dwork: delayed work template;
+ * @lock: spin lock;
+ * @aggr_cache: last value of aggregation register status;
+ * @psu_cache: last value of PSU register status;
+ * @pwr_cache: last value of power register status;
+ * @fan_cache: last value of FAN register status;
+ */
+struct mlxcpld_hotplug_priv_data {
+	int irq;
+	struct platform_device *pdev;
+	struct mlxcpld_hotplug_platform_data *plat;
+	struct device *hwmon;
+	struct attribute *mlxcpld_hotplug_attr[MLXCPLD_HOTPLUG_ATTRS_NUM + 1];
+	struct sensor_device_attribute_2
+			mlxcpld_hotplug_dev_attr[MLXCPLD_HOTPLUG_ATTRS_NUM];
+	struct attribute_group group;
+	const struct attribute_group *groups[2];
+	struct delayed_work dwork;
+	spinlock_t lock;
+	u8 aggr_cache;
+	u8 psu_cache;
+	u8 pwr_cache;
+	u8 fan_cache;
+};
+
+static ssize_t mlxcpld_hotplug_attr_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mlxcpld_hotplug_priv_data *priv = platform_get_drvdata(pdev);
+	int index = to_sensor_dev_attr_2(attr)->index;
+	int nr = to_sensor_dev_attr_2(attr)->nr;
+	u8 reg_val = 0;
+
+	switch (nr) {
+	case MLXCPLD_HOTPLUG_ATTR_TYPE_PSU:
+		/* Bit = 0 : PSU is present. */
+		reg_val = !!!(inb(priv->plat->psu_reg_offset) & BIT(index));
+		break;
+
+	case MLXCPLD_HOTPLUG_ATTR_TYPE_PWR:
+		/* Bit = 1 : power cable is attached. */
+		reg_val = !!(inb(priv->plat->pwr_reg_offset) & BIT(index %
+						priv->plat->pwr_count));
+		break;
+
+	case MLXCPLD_HOTPLUG_ATTR_TYPE_FAN:
+		/* Bit = 0 : FAN is present. */
+		reg_val = !!!(inb(priv->plat->fan_reg_offset) & BIT(index %
+						priv->plat->fan_count));
+		break;
+	}
+
+	return sprintf(buf, "%u\n", reg_val);
+}
+
+#define PRIV_ATTR(i) priv->mlxcpld_hotplug_attr[i]
+#define PRIV_DEV_ATTR(i) priv->mlxcpld_hotplug_dev_attr[i]
+static int mlxcpld_hotplug_attr_init(struct mlxcpld_hotplug_priv_data *priv)
+{
+	int num_attrs = priv->plat->psu_count + priv->plat->pwr_count +
+			priv->plat->fan_count;
+	int i;
+
+	priv->group.attrs = devm_kzalloc(&priv->pdev->dev, num_attrs *
+					 sizeof(struct attribute *),
+					 GFP_KERNEL);
+	if (!priv->group.attrs)
+		return -ENOMEM;
+
+	for (i = 0; i < num_attrs; i++) {
+		PRIV_ATTR(i) = &PRIV_DEV_ATTR(i).dev_attr.attr;
+
+		if (i < priv->plat->psu_count) {
+			PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
+						GFP_KERNEL, "psu%u", i + 1);
+			PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_PSU;
+		} else if (i < priv->plat->psu_count + priv->plat->pwr_count) {
+			PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
+						GFP_KERNEL, "pwr%u", i %
+						priv->plat->pwr_count + 1);
+			PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_PWR;
+		} else {
+			PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev,
+						GFP_KERNEL, "fan%u", i %
+						priv->plat->fan_count + 1);
+			PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_FAN;
+		}
+
+		if (!PRIV_ATTR(i)->name) {
+			dev_err(&priv->pdev->dev, "Memory allocation failed for sysfs attribute %d.\n",
+				i + 1);
+			return -ENOMEM;
+		}
+
+		PRIV_DEV_ATTR(i).dev_attr.attr.name = PRIV_ATTR(i)->name;
+		PRIV_DEV_ATTR(i).dev_attr.attr.mode = S_IRUGO;
+		PRIV_DEV_ATTR(i).dev_attr.show = mlxcpld_hotplug_attr_show;
+		PRIV_DEV_ATTR(i).index = i;
+		sysfs_attr_init(&PRIV_DEV_ATTR(i).dev_attr.attr);
+	}
+
+	priv->group.attrs = priv->mlxcpld_hotplug_attr;
+	priv->groups[0] = &priv->group;
+	priv->groups[1] = NULL;
+
+	return 0;
+}
+
+static int mlxcpld_hotplug_device_create(struct device *dev,
+					 struct mlxcpld_hotplug_device *item)
+{
+	item->adapter = i2c_get_adapter(item->bus);
+	if (!item->adapter) {
+		dev_err(dev, "Failed to get adapter for bus %d\n",
+			item->bus);
+		return -EFAULT;
+	}
+
+	item->client = i2c_new_device(item->adapter, &item->brdinfo);
+	if (!item->client) {
+		dev_err(dev, "Failed to create client %s at bus %d at addr 0x%02x\n",
+			item->brdinfo.type, item->bus, item->brdinfo.addr);
+		i2c_put_adapter(item->adapter);
+		item->adapter = NULL;
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static void mlxcpld_hotplug_device_destroy(struct mlxcpld_hotplug_device *item)
+{
+	if (item->client) {
+		i2c_unregister_device(item->client);
+		item->client = NULL;
+	}
+
+	if (item->adapter) {
+		i2c_put_adapter(item->adapter);
+		item->adapter = NULL;
+	}
+}
+
+static inline void
+mlxcpld_hotplug_work_helper(struct device *dev,
+			    struct mlxcpld_hotplug_device *item, u8 is_inverse,
+			    u16 offset, u8 mask, u8 *cache)
+{
+	u8 val, asserted;
+	int bit;
+
+	/* Mask event. */
+	outb(0, offset + MLXCPLD_HOTPLUG_MASK_OFF);
+	/* Read status. */
+	val = inb(offset) & mask;
+	asserted = *cache ^ val;
+	*cache = val;
+
+	/*
+	 * Validate if item related to received signal type is valid.
+	 * It should never happen, excepted the situation when some
+	 * piece of hardware is broken. In such situation just produce
+	 * error message and return. Caller must continue to handle the
+	 * signals from other devices if any.
+	 */
+	if (unlikely(!item)) {
+		dev_err(dev, "False signal is received: register at offset 0x%02x, mask 0x%02x.\n",
+			offset, mask);
+		return;
+	}
+
+	for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
+		if (val & BIT(bit)) {
+			if (is_inverse)
+				mlxcpld_hotplug_device_destroy(item + bit);
+			else
+				mlxcpld_hotplug_device_create(dev, item + bit);
+		} else {
+			if (is_inverse)
+				mlxcpld_hotplug_device_create(dev, item + bit);
+			else
+				mlxcpld_hotplug_device_destroy(item + bit);
+		}
+	}
+
+	/* Acknowledge event. */
+	outb(0, offset + MLXCPLD_HOTPLUG_EVENT_OFF);
+	/* Unmask event. */
+	outb(mask, offset + MLXCPLD_HOTPLUG_MASK_OFF);
+}
+
+/*
+ * mlxcpld_hotplug_work_handler - performs traversing of CPLD interrupt
+ * registers according to the below hierarchy schema:
+ *
+ *                   Aggregation registers (status/mask)
+ * PSU registers:           *---*
+ * *-----------------*      |   |
+ * |status/event/mask|----->| * |
+ * *-----------------*      |   |
+ * Power registers:         |   |
+ * *-----------------*      |   |
+ * |status/event/mask|----->| * |---> CPU
+ * *-----------------*      |   |
+ * FAN registers:
+ * *-----------------*      |   |
+ * |status/event/mask|----->| * |
+ * *-----------------*      |   |
+ *                          *---*
+ * In case some system changed are detected: FAN in/out, PSU in/out, power
+ * cable attached/detached, relevant device is created or destroyed.
+ */
+static void mlxcpld_hotplug_work_handler(struct work_struct *work)
+{
+	struct mlxcpld_hotplug_priv_data *priv = container_of(work,
+				struct mlxcpld_hotplug_priv_data, dwork.work);
+	u8 val, aggr_asserted;
+	unsigned long flags;
+
+	/* Mask aggregation event. */
+	outb(0, priv->plat->top_aggr_offset + MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
+	/* Read aggregation status. */
+	val = inb(priv->plat->top_aggr_offset) & priv->plat->top_aggr_mask;
+	aggr_asserted = priv->aggr_cache ^ val;
+	priv->aggr_cache = val;
+
+	/* Handle PSU configuration changes. */
+	if (aggr_asserted & priv->plat->top_aggr_psu_mask)
+		mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->psu,
+					    1, priv->plat->psu_reg_offset,
+					    priv->plat->psu_mask,
+					    &priv->psu_cache);
+
+	/* Handle power cable configuration changes. */
+	if (aggr_asserted & priv->plat->top_aggr_pwr_mask)
+		mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->pwr,
+					    0, priv->plat->pwr_reg_offset,
+					    priv->plat->pwr_mask,
+					    &priv->pwr_cache);
+
+	/* Handle FAN configuration changes. */
+	if (aggr_asserted & priv->plat->top_aggr_fan_mask)
+		mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->fan,
+					    1, priv->plat->fan_reg_offset,
+					    priv->plat->fan_mask,
+					    &priv->fan_cache);
+
+	if (aggr_asserted) {
+		spin_lock_irqsave(&priv->lock, flags);
+
+		/*
+		 * It is possible, that some signals have been inserted, while
+		 * interrupt has been masked by mlxcpld_hotplug_work_handler.
+		 * In this case such signals will be missed. In order to handle
+		 * these signals delayed work is canceled and work task
+		 * re-scheduled for immediate execution. It allows to handle
+		 * missed signals, if any. In other case work handler just
+		 * validates that no new signals have been received during
+		 * masking.
+		 */
+		cancel_delayed_work(&priv->dwork);
+		schedule_delayed_work(&priv->dwork, 0);
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		return;
+	}
+
+	/* Unmask aggregation event (no need acknowledge). */
+	outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset +
+						MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
+}
+
+static void mlxcpld_hotplug_set_irq(struct mlxcpld_hotplug_priv_data *priv)
+{
+	/* Clear psu presense event. */
+	outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
+	/* Set psu initial status as mask and unmask psu event. */
+	priv->psu_cache = priv->plat->psu_mask;
+	outb(priv->plat->psu_mask, priv->plat->psu_reg_offset +
+						MLXCPLD_HOTPLUG_MASK_OFF);
+
+	/* Clear power cable event. */
+	outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
+	/* Keep power initial status as zero and unmask power event. */
+	outb(priv->plat->pwr_mask, priv->plat->pwr_reg_offset +
+						MLXCPLD_HOTPLUG_MASK_OFF);
+
+	/* Clear fan presense event. */
+	outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
+	/* Set fan initial status as mask and unmask fan event. */
+	priv->fan_cache = priv->plat->fan_mask;
+	outb(priv->plat->fan_mask, priv->plat->fan_reg_offset +
+						MLXCPLD_HOTPLUG_MASK_OFF);
+
+	/* Keep aggregation initial status as zero and unmask events. */
+	outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset +
+						MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
+
+	/* Invoke work handler for initializing hot plug devices setting. */
+	mlxcpld_hotplug_work_handler(&priv->dwork.work);
+
+	enable_irq(priv->irq);
+}
+
+static void mlxcpld_hotplug_unset_irq(struct mlxcpld_hotplug_priv_data *priv)
+{
+	int i;
+
+	disable_irq(priv->irq);
+	cancel_delayed_work_sync(&priv->dwork);
+
+	/* Mask aggregation event. */
+	outb(0, priv->plat->top_aggr_offset + MLXCPLD_HOTPLUG_AGGR_MASK_OFF);
+
+	/* Mask psu presense event. */
+	outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF);
+	/* Clear psu presense event. */
+	outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
+
+	/* Mask power cable event. */
+	outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF);
+	/* Clear power cable event. */
+	outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
+
+	/* Mask fan presense event. */
+	outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF);
+	/* Clear fan presense event. */
+	outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF);
+
+	/* Remove all the attached devices. */
+	for (i = 0; i < priv->plat->psu_count; i++)
+		mlxcpld_hotplug_device_destroy(priv->plat->psu + i);
+
+	for (i = 0; i < priv->plat->pwr_count; i++)
+		mlxcpld_hotplug_device_destroy(priv->plat->pwr + i);
+
+	for (i = 0; i < priv->plat->fan_count; i++)
+		mlxcpld_hotplug_device_destroy(priv->plat->fan + i);
+}
+
+static irqreturn_t mlxcpld_hotplug_irq_handler(int irq, void *dev)
+{
+	struct mlxcpld_hotplug_priv_data *priv =
+				(struct mlxcpld_hotplug_priv_data *)dev;
+
+	/* Schedule work task for immediate execution.*/
+	schedule_delayed_work(&priv->dwork, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int mlxcpld_hotplug_probe(struct platform_device *pdev)
+{
+	struct mlxcpld_hotplug_platform_data *pdata;
+	struct mlxcpld_hotplug_priv_data *priv;
+	int err;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Failed to get platform data.\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->pdev = pdev;
+	priv->plat = pdata;
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get platform irq: %d\n",
+			priv->irq);
+		return priv->irq;
+	}
+
+	err = devm_request_irq(&pdev->dev, priv->irq,
+				mlxcpld_hotplug_irq_handler, 0, pdev->name,
+				priv);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to request irq: %d\n", err);
+		return err;
+	}
+	disable_irq(priv->irq);
+
+	INIT_DELAYED_WORK(&priv->dwork, mlxcpld_hotplug_work_handler);
+	spin_lock_init(&priv->lock);
+
+	err = mlxcpld_hotplug_attr_init(priv);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to allocate attributes: %d\n", err);
+		return err;
+	}
+
+	priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev,
+					"mlxcpld_hotplug", priv, priv->groups);
+	if (IS_ERR(priv->hwmon)) {
+		dev_err(&pdev->dev, "Failed to register hwmon device %ld\n",
+			PTR_ERR(priv->hwmon));
+		return PTR_ERR(priv->hwmon);
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	/* Perform initial interrupts setup. */
+	mlxcpld_hotplug_set_irq(priv);
+
+	return 0;
+}
+
+static int mlxcpld_hotplug_remove(struct platform_device *pdev)
+{
+	struct mlxcpld_hotplug_priv_data *priv = platform_get_drvdata(pdev);
+
+	/* Clean interrupts setup. */
+	mlxcpld_hotplug_unset_irq(priv);
+
+	return 0;
+}
+
+static struct platform_driver mlxcpld_hotplug_driver = {
+	.driver = {
+		.name = "mlxcpld-hotplug",
+	},
+	.probe = mlxcpld_hotplug_probe,
+	.remove = mlxcpld_hotplug_remove,
+};
+
+module_platform_driver(mlxcpld_hotplug_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("Mellanox CPLD hotplug platform driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:mlxcpld-hotplug");
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index 3f870972247c..59b8eb626dcc 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -458,7 +458,7 @@ static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc)
 
 	rc = acpi_evaluate_integer(pcc->handle, METHOD_HKEY_QUERY,
 				   NULL, &result);
-	if (!ACPI_SUCCESS(rc)) {
+	if (ACPI_FAILURE(rc)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				 "error getting hotkey status\n"));
 		return;
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index b65ce7519411..aa65a857a6b1 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -128,6 +128,7 @@ enum {
 /* ACPI HIDs */
 #define TPACPI_ACPI_IBM_HKEY_HID	"IBM0068"
 #define TPACPI_ACPI_LENOVO_HKEY_HID	"LEN0068"
+#define TPACPI_ACPI_LENOVO_HKEY_V2_HID	"LEN0268"
 #define TPACPI_ACPI_EC_HID		"PNP0C09"
 
 /* Input IDs */
@@ -190,6 +191,9 @@ enum tpacpi_hkey_event_t {
 	TP_HKEY_EV_LID_OPEN		= 0x5002, /* laptop lid opened */
 	TP_HKEY_EV_TABLET_TABLET	= 0x5009, /* tablet swivel up */
 	TP_HKEY_EV_TABLET_NOTEBOOK	= 0x500a, /* tablet swivel down */
+	TP_HKEY_EV_TABLET_CHANGED	= 0x60c0, /* X1 Yoga (2016):
+						   * enter/leave tablet mode
+						   */
 	TP_HKEY_EV_PEN_INSERTED		= 0x500b, /* tablet pen inserted */
 	TP_HKEY_EV_PEN_REMOVED		= 0x500c, /* tablet pen removed */
 	TP_HKEY_EV_BRGHT_CHANGED	= 0x5010, /* backlight control event */
@@ -302,7 +306,12 @@ static struct {
 	u32 hotkey:1;
 	u32 hotkey_mask:1;
 	u32 hotkey_wlsw:1;
-	u32 hotkey_tablet:1;
+	enum {
+		TP_HOTKEY_TABLET_NONE = 0,
+		TP_HOTKEY_TABLET_USES_MHKG,
+		/* X1 Yoga 2016, seen on BIOS N1FET44W */
+		TP_HOTKEY_TABLET_USES_CMMD,
+	} hotkey_tablet;
 	u32 kbdlight:1;
 	u32 light:1;
 	u32 light_status:1;
@@ -2059,6 +2068,8 @@ static void hotkey_poll_setup(const bool may_warn);
 
 /* HKEY.MHKG() return bits */
 #define TP_HOTKEY_TABLET_MASK (1 << 3)
+/* ThinkPad X1 Yoga (2016) */
+#define TP_EC_CMMD_TABLET_MODE 0x6
 
 static int hotkey_get_wlsw(void)
 {
@@ -2083,10 +2094,23 @@ static int hotkey_get_tablet_mode(int *status)
 {
 	int s;
 
-	if (!acpi_evalf(hkey_handle, &s, "MHKG", "d"))
-		return -EIO;
+	switch (tp_features.hotkey_tablet) {
+	case TP_HOTKEY_TABLET_USES_MHKG:
+		if (!acpi_evalf(hkey_handle, &s, "MHKG", "d"))
+			return -EIO;
+
+		*status = ((s & TP_HOTKEY_TABLET_MASK) != 0);
+		break;
+	case TP_HOTKEY_TABLET_USES_CMMD:
+		if (!acpi_evalf(ec_handle, &s, "CMMD", "d"))
+			return -EIO;
+
+		*status = (s == TP_EC_CMMD_TABLET_MODE);
+		break;
+	default:
+		break;
+	}
 
-	*status = ((s & TP_HOTKEY_TABLET_MASK) != 0);
 	return 0;
 }
 
@@ -3117,6 +3141,37 @@ static const struct tpacpi_quirk tpacpi_hotkey_qtable[] __initconst = {
 typedef u16 tpacpi_keymap_entry_t;
 typedef tpacpi_keymap_entry_t tpacpi_keymap_t[TPACPI_HOTKEY_MAP_LEN];
 
+static int hotkey_init_tablet_mode(void)
+{
+	int in_tablet_mode = 0, res;
+	char *type = NULL;
+
+	if (acpi_evalf(hkey_handle, &res, "MHKG", "qd")) {
+		/* For X41t, X60t, X61t Tablets... */
+		tp_features.hotkey_tablet = TP_HOTKEY_TABLET_USES_MHKG;
+		in_tablet_mode = !!(res & TP_HOTKEY_TABLET_MASK);
+		type = "MHKG";
+	} else if (acpi_evalf(ec_handle, &res, "CMMD", "qd")) {
+		/* For X1 Yoga (2016) */
+		tp_features.hotkey_tablet = TP_HOTKEY_TABLET_USES_CMMD;
+		in_tablet_mode = res == TP_EC_CMMD_TABLET_MODE;
+		type = "CMMD";
+	}
+
+	if (!tp_features.hotkey_tablet)
+		return 0;
+
+	pr_info("Tablet mode switch found (type: %s), currently in %s mode\n",
+		type, in_tablet_mode ? "tablet" : "laptop");
+
+	res = add_to_attr_set(hotkey_dev_attributes,
+			      &dev_attr_hotkey_tablet_mode.attr);
+	if (res)
+		return -1;
+
+	return in_tablet_mode;
+}
+
 static int __init hotkey_init(struct ibm_init_struct *iibm)
 {
 	/* Requirements for changing the default keymaps:
@@ -3464,21 +3519,14 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		res = add_to_attr_set(hotkey_dev_attributes,
 				&dev_attr_hotkey_radio_sw.attr);
 
-	/* For X41t, X60t, X61t Tablets... */
-	if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
-		tp_features.hotkey_tablet = 1;
-		tabletsw_state = !!(status & TP_HOTKEY_TABLET_MASK);
-		pr_info("possible tablet mode switch found; "
-			"ThinkPad in %s mode\n",
-			(tabletsw_state) ? "tablet" : "laptop");
-		res = add_to_attr_set(hotkey_dev_attributes,
-				&dev_attr_hotkey_tablet_mode.attr);
-	}
+	res = hotkey_init_tablet_mode();
+	if (res < 0)
+		goto err_exit;
 
-	if (!res)
-		res = register_attr_set_with_sysfs(
-				hotkey_dev_attributes,
-				&tpacpi_pdev->dev.kobj);
+	tabletsw_state = res;
+
+	res = register_attr_set_with_sysfs(hotkey_dev_attributes,
+					   &tpacpi_pdev->dev.kobj);
 	if (res)
 		goto err_exit;
 
@@ -3899,6 +3947,12 @@ static bool hotkey_notify_6xxx(const u32 hkey,
 		*ignore_acpi_ev = true;
 		return true;
 
+	case TP_HKEY_EV_TABLET_CHANGED:
+		tpacpi_input_send_tabletsw();
+		hotkey_tablet_mode_notify_change();
+		*send_acpi_ev = false;
+		break;
+
 	default:
 		pr_warn("unknown possible thermal alarm or keyboard event received\n");
 		known = false;
@@ -4143,6 +4197,7 @@ errexit:
 static const struct acpi_device_id ibm_htk_device_ids[] = {
 	{TPACPI_ACPI_IBM_HKEY_HID, 0},
 	{TPACPI_ACPI_LENOVO_HKEY_HID, 0},
+	{TPACPI_ACPI_LENOVO_HKEY_V2_HID, 0},
 	{"", 0},
 };
 
@@ -7716,7 +7771,7 @@ static struct ibm_struct volume_driver_data = {
 
 #define alsa_card NULL
 
-static void inline volume_alsa_notify_change(void)
+static inline void volume_alsa_notify_change(void)
 {
 }
 
@@ -9018,7 +9073,7 @@ static int mute_led_on_off(struct tp_led_table *t, bool state)
 	acpi_handle temp;
 	int output;
 
-	if (!ACPI_SUCCESS(acpi_get_handle(hkey_handle, t->name, &temp))) {
+	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, t->name, &temp))) {
 		pr_warn("Thinkpad ACPI has no %s interface.\n", t->name);
 		return -EIO;
 	}
diff --git a/include/linux/platform_data/mlxcpld-hotplug.h b/include/linux/platform_data/mlxcpld-hotplug.h
new file mode 100644
index 000000000000..e4cfcffaa6f4
--- /dev/null
+++ b/include/linux/platform_data/mlxcpld-hotplug.h
@@ -0,0 +1,99 @@
+/*
+ * include/linux/platform_data/mlxcpld-hotplug.h
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H
+#define __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H
+
+/**
+ * struct mlxcpld_hotplug_device - I2C device data:
+ * @adapter: I2C device adapter;
+ * @client: I2C device client;
+ * @brdinfo: device board information;
+ * @bus: I2C bus, where device is attached;
+ *
+ * Structure represents I2C hotplug device static data (board topology) and
+ * dynamic data (related kernel objects handles).
+ */
+struct mlxcpld_hotplug_device {
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	struct i2c_board_info brdinfo;
+	u16 bus;
+};
+
+/**
+ * struct mlxcpld_hotplug_platform_data - device platform data:
+ * @top_aggr_offset: offset of top aggregation interrupt register;
+ * @top_aggr_mask: top aggregation interrupt common mask;
+ * @top_aggr_psu_mask: top aggregation interrupt PSU mask;
+ * @psu_reg_offset: offset of PSU interrupt register;
+ * @psu_mask: PSU interrupt mask;
+ * @psu_count: number of equipped replaceable PSUs;
+ * @psu: pointer to PSU devices data array;
+ * @top_aggr_pwr_mask: top aggregation interrupt power mask;
+ * @pwr_reg_offset: offset of power interrupt register
+ * @pwr_mask: power interrupt mask;
+ * @pwr_count: number of power sources;
+ * @pwr: pointer to power devices data array;
+ * @top_aggr_fan_mask: top aggregation interrupt FAN mask;
+ * @fan_reg_offset: offset of FAN interrupt register;
+ * @fan_mask: FAN interrupt mask;
+ * @fan_count: number of equipped replaceable FANs;
+ * @fan: pointer to FAN devices data array;
+ *
+ * Structure represents board platform data, related to system hotplug events,
+ * like FAN, PSU, power cable insertion and removing. This data provides the
+ * number of hot-pluggable devices and hardware description for event handling.
+ */
+struct mlxcpld_hotplug_platform_data {
+	u16 top_aggr_offset;
+	u8 top_aggr_mask;
+	u8 top_aggr_psu_mask;
+	u16 psu_reg_offset;
+	u8 psu_mask;
+	u8 psu_count;
+	struct mlxcpld_hotplug_device *psu;
+	u8 top_aggr_pwr_mask;
+	u16 pwr_reg_offset;
+	u8 pwr_mask;
+	u8 pwr_count;
+	struct mlxcpld_hotplug_device *pwr;
+	u8 top_aggr_fan_mask;
+	u16 fan_reg_offset;
+	u8 fan_mask;
+	u8 fan_count;
+	struct mlxcpld_hotplug_device *fan;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H */