Merge tag 'spi-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Quite a busy release for SPI, mainly as a result of Boris Brezillon's
  work on improving the integration with MTD for accelerated SPI flash
  controllers. He's added a new spi_mem interface which works a lot
  better with general hardware and converted the users over to it, as a
  result of this work we've got some MTD changes in here as well.

  Other highlights include:

   - Lots of spring cleaning for the s3c64xx driver.

   - Removal of the bcm53xx, the hardware is also supported by the mspi
     driver but SoC naming had caused people to miss the duplication.

   - Conversion of the pxa2xx driver to use the standard message
     processing loop rather than open coding.

   - A bunch of improvements to the runtime PM of the OMAP McSPI driver"

* tag 'spi-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
  spi: Fix typo on SPI_MEM help text
  spi: sh-msiof: Fix setting SIRMDR1.SYNCAC to match SITMDR1.SYNCAC
  mtd: devices: m25p80: Use spi_mem_set_drvdata() instead of spi_set_drvdata()
  spi: omap2-mcspi: Remove unnecessary pm_runtime_force_suspend()
  spi: Add missing pm_runtime_put_noidle() after failed get
  spi: ti-qspi: Make sure res_mmap != NULL before dereferencing it
  spi: spi-s3c64xx: Fix system resume support
  spi: bcm-qspi: Fix build failure caused by spi_flash_read() API removal
  spi: Get rid of the spi_flash_read() API
  mtd: spi-nor: Use the spi_mem_xx() API
  spi: ti-qspi: Implement the spi_mem interface
  spi: bcm-qspi: Implement the spi_mem interface
  spi: Make support for regular transfers optional when ->mem_ops != NULL
  spi: Extend the core to ease integration of SPI memory controllers
  spi: remove forgotten CONFIG_SPI_BCM53XX
  spi: remove the older/duplicated bcm53xx driver
  spi: pxa2xx: check clk_prepare_enable() return value
  spi: lpspi: Switch to SPDX identifier
  spi: mxs: Switch to SPDX identifier
  spi: imx: Switch to SPDX identifier
  ...

28 files changed, 1423 insertions, 1309 deletions

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 6def5445e03e..57b02c4b3f63 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -81,6 +81,7 @@ config MTD_DATAFLASH_OTP
 config MTD_M25P80
 	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
 	depends on SPI_MASTER && MTD_SPI_NOR
+	select SPI_MEM
 	help
 	  This enables access to most modern SPI flash chips, used for
 	  program and data storage.   Series supported include Atmel AT26DF,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index a4e18f6aaa33..e84563d2067f 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -24,12 +24,13 @@
 #include <linux/mtd/partitions.h>
 
 #include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
 #include <linux/spi/flash.h>
 #include <linux/mtd/spi-nor.h>
 
 #define	MAX_CMD_SIZE		6
 struct m25p {
-	struct spi_device	*spi;
+	struct spi_mem		*spimem;
 	struct spi_nor		spi_nor;
 	u8			command[MAX_CMD_SIZE];
 };
@@ -37,97 +38,68 @@ struct m25p {
 static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len)
 {
 	struct m25p *flash = nor->priv;
-	struct spi_device *spi = flash->spi;
+	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1),
+					  SPI_MEM_OP_NO_ADDR,
+					  SPI_MEM_OP_NO_DUMMY,
+					  SPI_MEM_OP_DATA_IN(len, val, 1));
 	int ret;
 
-	ret = spi_write_then_read(spi, &code, 1, val, len);
+	ret = spi_mem_exec_op(flash->spimem, &op);
 	if (ret < 0)
-		dev_err(&spi->dev, "error %d reading %x\n", ret, code);
+		dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret,
+			code);
 
 	return ret;
 }
 
-static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd)
-{
-	/* opcode is in cmd[0] */
-	cmd[1] = addr >> (nor->addr_width * 8 -  8);
-	cmd[2] = addr >> (nor->addr_width * 8 - 16);
-	cmd[3] = addr >> (nor->addr_width * 8 - 24);
-	cmd[4] = addr >> (nor->addr_width * 8 - 32);
-}
-
-static int m25p_cmdsz(struct spi_nor *nor)
-{
-	return 1 + nor->addr_width;
-}
-
 static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 {
 	struct m25p *flash = nor->priv;
-	struct spi_device *spi = flash->spi;
-
-	flash->command[0] = opcode;
-	if (buf)
-		memcpy(&flash->command[1], buf, len);
+	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1),
+					  SPI_MEM_OP_NO_ADDR,
+					  SPI_MEM_OP_NO_DUMMY,
+					  SPI_MEM_OP_DATA_OUT(len, buf, 1));
 
-	return spi_write(spi, flash->command, len + 1);
+	return spi_mem_exec_op(flash->spimem, &op);
 }
 
 static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
 			    const u_char *buf)
 {
 	struct m25p *flash = nor->priv;
-	struct spi_device *spi = flash->spi;
-	unsigned int inst_nbits, addr_nbits, data_nbits, data_idx;
-	struct spi_transfer t[3] = {};
-	struct spi_message m;
-	int cmd_sz = m25p_cmdsz(nor);
-	ssize_t ret;
+	struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
+				   SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
+				   SPI_MEM_OP_DUMMY(0, 1),
+				   SPI_MEM_OP_DATA_OUT(len, buf, 1));
+	size_t remaining = len;
+	int ret;
 
 	/* get transfer protocols. */
-	inst_nbits = spi_nor_get_protocol_inst_nbits(nor->write_proto);
-	addr_nbits = spi_nor_get_protocol_addr_nbits(nor->write_proto);
-	data_nbits = spi_nor_get_protocol_data_nbits(nor->write_proto);
-
-	spi_message_init(&m);
+	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
+	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
+	op.dummy.buswidth = op.addr.buswidth;
+	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
 
 	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
-		cmd_sz = 1;
-
-	flash->command[0] = nor->program_opcode;
-	m25p_addr2cmd(nor, to, flash->command);
+		op.addr.nbytes = 0;
 
-	t[0].tx_buf = flash->command;
-	t[0].tx_nbits = inst_nbits;
-	t[0].len = cmd_sz;
-	spi_message_add_tail(&t[0], &m);
-
-	/* split the op code and address bytes into two transfers if needed. */
-	data_idx = 1;
-	if (addr_nbits != inst_nbits) {
-		t[0].len = 1;
+	while (remaining) {
+		op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
+		ret = spi_mem_adjust_op_size(flash->spimem, &op);
+		if (ret)
+			return ret;
 
-		t[1].tx_buf = &flash->command[1];
-		t[1].tx_nbits = addr_nbits;
-		t[1].len = cmd_sz - 1;
-		spi_message_add_tail(&t[1], &m);
+		ret = spi_mem_exec_op(flash->spimem, &op);
+		if (ret)
+			return ret;
 
-		data_idx = 2;
+		op.addr.val += op.data.nbytes;
+		remaining -= op.data.nbytes;
+		op.data.buf.out += op.data.nbytes;
 	}
 
-	t[data_idx].tx_buf = buf;
-	t[data_idx].tx_nbits = data_nbits;
-	t[data_idx].len = len;
-	spi_message_add_tail(&t[data_idx], &m);
-
-	ret = spi_sync(spi, &m);
-	if (ret)
-		return ret;
-
-	ret = m.actual_length - cmd_sz;
-	if (ret < 0)
-		return -EIO;
-	return ret;
+	return len;
 }
 
 /*
@@ -138,92 +110,39 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 			   u_char *buf)
 {
 	struct m25p *flash = nor->priv;
-	struct spi_device *spi = flash->spi;
-	unsigned int inst_nbits, addr_nbits, data_nbits, data_idx;
-	struct spi_transfer t[3];
-	struct spi_message m;
-	unsigned int dummy = nor->read_dummy;
-	ssize_t ret;
-	int cmd_sz;
+	struct spi_mem_op op =
+			SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
+				   SPI_MEM_OP_ADDR(nor->addr_width, from, 1),
+				   SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
+				   SPI_MEM_OP_DATA_IN(len, buf, 1));
+	size_t remaining = len;
+	int ret;
 
 	/* get transfer protocols. */
-	inst_nbits = spi_nor_get_protocol_inst_nbits(nor->read_proto);
-	addr_nbits = spi_nor_get_protocol_addr_nbits(nor->read_proto);
-	data_nbits = spi_nor_get_protocol_data_nbits(nor->read_proto);
+	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
+	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
+	op.dummy.buswidth = op.addr.buswidth;
+	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
 
 	/* convert the dummy cycles to the number of bytes */
-	dummy = (dummy * addr_nbits) / 8;
-
-	if (spi_flash_read_supported(spi)) {
-		struct spi_flash_read_message msg;
-
-		memset(&msg, 0, sizeof(msg));
+	op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
 
-		msg.buf = buf;
-		msg.from = from;
-		msg.len = len;
-		msg.read_opcode = nor->read_opcode;
-		msg.addr_width = nor->addr_width;
-		msg.dummy_bytes = dummy;
-		msg.opcode_nbits = inst_nbits;
-		msg.addr_nbits = addr_nbits;
-		msg.data_nbits = data_nbits;
-
-		ret = spi_flash_read(spi, &msg);
-		if (ret < 0)
+	while (remaining) {
+		op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
+		ret = spi_mem_adjust_op_size(flash->spimem, &op);
+		if (ret)
 			return ret;
-		return msg.retlen;
-	}
 
-	spi_message_init(&m);
-	memset(t, 0, (sizeof t));
-
-	flash->command[0] = nor->read_opcode;
-	m25p_addr2cmd(nor, from, flash->command);
-
-	t[0].tx_buf = flash->command;
-	t[0].tx_nbits = inst_nbits;
-	t[0].len = m25p_cmdsz(nor) + dummy;
-	spi_message_add_tail(&t[0], &m);
-
-	/*
-	 * Set all dummy/mode cycle bits to avoid sending some manufacturer
-	 * specific pattern, which might make the memory enter its Continuous
-	 * Read mode by mistake.
-	 * Based on the different mode cycle bit patterns listed and described
-	 * in the JESD216B specification, the 0xff value works for all memories
-	 * and all manufacturers.
-	 */
-	cmd_sz = t[0].len;
-	memset(flash->command + cmd_sz - dummy, 0xff, dummy);
-
-	/* split the op code and address bytes into two transfers if needed. */
-	data_idx = 1;
-	if (addr_nbits != inst_nbits) {
-		t[0].len = 1;
-
-		t[1].tx_buf = &flash->command[1];
-		t[1].tx_nbits = addr_nbits;
-		t[1].len = cmd_sz - 1;
-		spi_message_add_tail(&t[1], &m);
+		ret = spi_mem_exec_op(flash->spimem, &op);
+		if (ret)
+			return ret;
 
-		data_idx = 2;
+		op.addr.val += op.data.nbytes;
+		remaining -= op.data.nbytes;
+		op.data.buf.in += op.data.nbytes;
 	}
 
-	t[data_idx].rx_buf = buf;
-	t[data_idx].rx_nbits = data_nbits;
-	t[data_idx].len = min3(len, spi_max_transfer_size(spi),
-			       spi_max_message_size(spi) - cmd_sz);
-	spi_message_add_tail(&t[data_idx], &m);
-
-	ret = spi_sync(spi, &m);
-	if (ret)
-		return ret;
-
-	ret = m.actual_length - cmd_sz;
-	if (ret < 0)
-		return -EIO;
-	return ret;
+	return len;
 }
 
 /*
@@ -231,8 +150,9 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
  * matches what the READ command supports, at least until this driver
  * understands FAST_READ (for clocks over 25 MHz).
  */
-static int m25p_probe(struct spi_device *spi)
+static int m25p_probe(struct spi_mem *spimem)
 {
+	struct spi_device *spi = spimem->spi;
 	struct flash_platform_data	*data;
 	struct m25p *flash;
 	struct spi_nor *nor;
@@ -244,9 +164,9 @@ static int m25p_probe(struct spi_device *spi)
 	char *flash_name;
 	int ret;
 
-	data = dev_get_platdata(&spi->dev);
+	data = dev_get_platdata(&spimem->spi->dev);
 
-	flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
+	flash = devm_kzalloc(&spimem->spi->dev, sizeof(*flash), GFP_KERNEL);
 	if (!flash)
 		return -ENOMEM;
 
@@ -258,12 +178,12 @@ static int m25p_probe(struct spi_device *spi)
 	nor->write_reg = m25p80_write_reg;
 	nor->read_reg = m25p80_read_reg;
 
-	nor->dev = &spi->dev;
+	nor->dev = &spimem->spi->dev;
 	spi_nor_set_flash_node(nor, spi->dev.of_node);
 	nor->priv = flash;
 
-	spi_set_drvdata(spi, flash);
-	flash->spi = spi;
+	spi_mem_set_drvdata(spimem, flash);
+	flash->spimem = spimem;
 
 	if (spi->mode & SPI_RX_QUAD) {
 		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
@@ -303,9 +223,9 @@ static int m25p_probe(struct spi_device *spi)
 }
 
 
-static int m25p_remove(struct spi_device *spi)
+static int m25p_remove(struct spi_mem *spimem)
 {
-	struct m25p	*flash = spi_get_drvdata(spi);
+	struct m25p	*flash = spi_mem_get_drvdata(spimem);
 
 	spi_nor_restore(&flash->spi_nor);
 
@@ -313,9 +233,9 @@ static int m25p_remove(struct spi_device *spi)
 	return mtd_device_unregister(&flash->spi_nor.mtd);
 }
 
-static void m25p_shutdown(struct spi_device *spi)
+static void m25p_shutdown(struct spi_mem *spimem)
 {
-	struct m25p *flash = spi_get_drvdata(spi);
+	struct m25p *flash = spi_mem_get_drvdata(spimem);
 
 	spi_nor_restore(&flash->spi_nor);
 }
@@ -386,12 +306,14 @@ static const struct of_device_id m25p_of_table[] = {
 };
 MODULE_DEVICE_TABLE(of, m25p_of_table);
 
-static struct spi_driver m25p80_driver = {
-	.driver = {
-		.name	= "m25p80",
-		.of_match_table = m25p_of_table,
+static struct spi_mem_driver m25p80_driver = {
+	.spidrv = {
+		.driver = {
+			.name	= "m25p80",
+			.of_match_table = m25p_of_table,
+		},
+		.id_table	= m25p_ids,
 	},
-	.id_table	= m25p_ids,
 	.probe	= m25p_probe,
 	.remove	= m25p_remove,
 	.shutdown	= m25p_shutdown,
@@ -402,7 +324,7 @@ static struct spi_driver m25p80_driver = {
 	 */
 };
 
-module_spi_driver(m25p80_driver);
+module_spi_mem_driver(m25p80_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Mike Lavender");
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2d4146ce2f1b..ad5d68e1dab7 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -47,6 +47,13 @@ config SPI_MASTER
 
 if SPI_MASTER
 
+config SPI_MEM
+	bool "SPI memory extension"
+	help
+	  Enable this option if you want to enable the SPI memory extension.
+	  This extension is meant to simplify interaction with SPI memories
+	  by providing a high-level interface to send memory-like commands.
+
 comment "SPI Master Controller Drivers"
 
 config SPI_ALTERA
@@ -71,7 +78,6 @@ config SPI_ARMADA_3700
 
 config SPI_ATMEL
 	tristate "Atmel SPI Controller"
-	depends on HAS_DMA
 	depends on ARCH_AT91 || COMPILE_TEST
 	help
 	  This selects a driver for the Atmel SPI Controller, present on
@@ -115,14 +121,6 @@ config SPI_BCM2835AUX
 	  "universal SPI master", and the regular SPI controller.
 	  This driver is for the universal/auxiliary SPI controller.
 
-config SPI_BCM53XX
-	tristate "Broadcom BCM53xx SPI controller"
-	depends on ARCH_BCM_5301X
-	depends on BCMA_POSSIBLE
-	select BCMA
-	help
-          Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs.
-
 config SPI_BCM63XX
 	tristate "Broadcom BCM63xx SPI controller"
 	depends on BCM63XX || COMPILE_TEST
@@ -233,7 +231,6 @@ config SPI_EFM32
 
 config SPI_EP93XX
 	tristate "Cirrus Logic EP93xx SPI controller"
-	depends on HAS_DMA
 	depends on ARCH_EP93XX || COMPILE_TEST
 	help
 	  This enables using the Cirrus EP93xx SPI controller in master
@@ -355,7 +352,6 @@ config SPI_FSL_SPI
 config SPI_FSL_DSPI
 	tristate "Freescale DSPI controller"
 	select REGMAP_MMIO
-	depends on HAS_DMA
 	depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || M5441x || COMPILE_TEST
 	help
 	  This enables support for the Freescale DSPI controller in master
@@ -431,7 +427,6 @@ config SPI_OMAP_UWIRE
 
 config SPI_OMAP24XX
 	tristate "McSPI driver for OMAP"
-	depends on HAS_DMA
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	select SG_SPLIT
 	help
@@ -440,7 +435,6 @@ config SPI_OMAP24XX
 
 config SPI_TI_QSPI
 	tristate "DRA7xxx QSPI controller support"
-	depends on HAS_DMA
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	help
 	  QSPI master controller for DRA7xxx used for flash devices.
@@ -469,7 +463,6 @@ config SPI_PIC32
 config SPI_PIC32_SQI
 	tristate "Microchip PIC32 Quad SPI driver"
 	depends on MACH_PIC32 || COMPILE_TEST
-	depends on HAS_DMA
 	help
 	  SPI driver for PIC32 Quad SPI controller.
 
@@ -572,7 +565,7 @@ config SPI_SC18IS602
 
 config SPI_SH_MSIOF
 	tristate "SuperH MSIOF SPI controller"
-	depends on HAVE_CLK && HAS_DMA
+	depends on HAVE_CLK
 	depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
 	help
 	  SPI driver for SuperH and SH Mobile MSIOF blocks.
@@ -650,7 +643,7 @@ config SPI_MXS
 config SPI_TEGRA114
 	tristate "NVIDIA Tegra114 SPI Controller"
 	depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
-	depends on RESET_CONTROLLER && HAS_DMA
+	depends on RESET_CONTROLLER
 	help
 	  SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
 	  is different than the older SoCs SPI controller and also register interface
@@ -668,7 +661,7 @@ config SPI_TEGRA20_SFLASH
 config SPI_TEGRA20_SLINK
 	tristate "Nvidia Tegra20/Tegra30 SLINK Controller"
 	depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
-	depends on RESET_CONTROLLER && HAS_DMA
+	depends on RESET_CONTROLLER
 	help
 	  SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface.
 
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index b935f10eb961..cb1f4378b87c 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -8,6 +8,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
 # small core, mostly translating board-specific
 # config declarations into driver model code
 obj-$(CONFIG_SPI_MASTER)		+= spi.o
+obj-$(CONFIG_SPI_MEM)			+= spi-mem.o
 obj-$(CONFIG_SPI_SPIDEV)		+= spidev.o
 obj-$(CONFIG_SPI_LOOPBACK_TEST)		+= spi-loopback-test.o
 
@@ -20,7 +21,6 @@ obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
 obj-$(CONFIG_SPI_AXI_SPI_ENGINE)	+= spi-axi-spi-engine.o
 obj-$(CONFIG_SPI_BCM2835)		+= spi-bcm2835.o
 obj-$(CONFIG_SPI_BCM2835AUX)		+= spi-bcm2835aux.o
-obj-$(CONFIG_SPI_BCM53XX)		+= spi-bcm53xx.o
 obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o
 obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o
 obj-$(CONFIG_SPI_BCM_QSPI)		+= spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o
diff --git a/drivers/spi/internals.h b/drivers/spi/internals.h
new file mode 100644
index 000000000000..4a28a8395552
--- /dev/null
+++ b/drivers/spi/internals.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Exceet Electronics GmbH
+ * Copyright (C) 2018 Bootlin
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ *
+ * Helpers needed by the spi or spi-mem logic. Should not be used outside of
+ * spi-mem.c and spi.c.
+ */
+
+#ifndef __LINUX_SPI_INTERNALS_H
+#define __LINUX_SPI_INTERNALS_H
+
+#include <linux/device.h>
+#include <linux/dma-direction.h>
+#include <linux/scatterlist.h>
+#include <linux/spi/spi.h>
+
+void spi_flush_queue(struct spi_controller *ctrl);
+
+#ifdef CONFIG_HAS_DMA
+int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
+		struct sg_table *sgt, void *buf, size_t len,
+		enum dma_data_direction dir);
+void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev,
+		   struct sg_table *sgt, enum dma_data_direction dir);
+#else /* !CONFIG_HAS_DMA */
+static inline int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
+			      struct sg_table *sgt, void *buf, size_t len,
+			      enum dma_data_direction dir)
+{
+	return -EINVAL;
+}
+
+static inline void spi_unmap_buf(struct spi_controller *ctlr,
+				 struct device *dev, struct sg_table *sgt,
+				 enum dma_data_direction dir)
+{
+}
+#endif /* CONFIG_HAS_DMA */
+
+#endif /* __LINUX_SPI_INTERNALS_H */
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 6573152ce893..8612525fa4e3 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
 #include <linux/sysfs.h>
 #include <linux/types.h>
 #include "spi-bcm-qspi.h"
@@ -215,10 +216,10 @@ struct bcm_qspi {
 	int bspi_maj_rev;
 	int bspi_min_rev;
 	int bspi_enabled;
-	struct spi_flash_read_message *bspi_rf_msg;
-	u32 bspi_rf_msg_idx;
-	u32 bspi_rf_msg_len;
-	u32 bspi_rf_msg_status;
+	const struct spi_mem_op *bspi_rf_op;
+	u32 bspi_rf_op_idx;
+	u32 bspi_rf_op_len;
+	u32 bspi_rf_op_status;
 	struct bcm_xfer_mode xfer_mode;
 	u32 s3_strap_override_ctrl;
 	bool bspi_mode;
@@ -313,26 +314,26 @@ static inline void bcm_qspi_bspi_lr_clear(struct bcm_qspi *qspi)
 
 static void bcm_qspi_bspi_lr_data_read(struct bcm_qspi *qspi)
 {
-	u32 *buf = (u32 *)qspi->bspi_rf_msg->buf;
+	u32 *buf = (u32 *)qspi->bspi_rf_op->data.buf.in;
 	u32 data = 0;
 
-	dev_dbg(&qspi->pdev->dev, "xfer %p rx %p rxlen %d\n", qspi->bspi_rf_msg,
-		qspi->bspi_rf_msg->buf, qspi->bspi_rf_msg_len);
+	dev_dbg(&qspi->pdev->dev, "xfer %p rx %p rxlen %d\n", qspi->bspi_rf_op,
+		qspi->bspi_rf_op->data.buf.in, qspi->bspi_rf_op_len);
 	while (!bcm_qspi_bspi_lr_is_fifo_empty(qspi)) {
 		data = bcm_qspi_bspi_lr_read_fifo(qspi);
-		if (likely(qspi->bspi_rf_msg_len >= 4) &&
+		if (likely(qspi->bspi_rf_op_len >= 4) &&
 		    IS_ALIGNED((uintptr_t)buf, 4)) {
-			buf[qspi->bspi_rf_msg_idx++] = data;
-			qspi->bspi_rf_msg_len -= 4;
+			buf[qspi->bspi_rf_op_idx++] = data;
+			qspi->bspi_rf_op_len -= 4;
 		} else {
 			/* Read out remaining bytes, make sure*/
-			u8 *cbuf = (u8 *)&buf[qspi->bspi_rf_msg_idx];
+			u8 *cbuf = (u8 *)&buf[qspi->bspi_rf_op_idx];
 
 			data = cpu_to_le32(data);
-			while (qspi->bspi_rf_msg_len) {
+			while (qspi->bspi_rf_op_len) {
 				*cbuf++ = (u8)data;
 				data >>= 8;
-				qspi->bspi_rf_msg_len--;
+				qspi->bspi_rf_op_len--;
 			}
 		}
 	}
@@ -349,14 +350,12 @@ static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
 }
 
 static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
-				       struct spi_flash_read_message *msg,
-				       int hp)
+				       const struct spi_mem_op *op, int hp)
 {
 	int bpc = 0, bpp = 0;
-	u8 command = msg->read_opcode;
-	int width  = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
-	int addrlen = msg->addr_width;
-	int addr_nbits = msg->addr_nbits ? msg->addr_nbits : SPI_NBITS_SINGLE;
+	u8 command = op->cmd.opcode;
+	int width  = op->cmd.buswidth ? op->cmd.buswidth : SPI_NBITS_SINGLE;
+	int addrlen = op->addr.nbytes * 8;
 	int flex_mode = 1;
 
 	dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
@@ -365,7 +364,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
 	if (addrlen == BSPI_ADDRLEN_4BYTES)
 		bpp = BSPI_BPP_ADDR_SELECT_MASK;
 
-	bpp |= msg->dummy_bytes * (8/addr_nbits);
+	bpp |= (op->dummy.nbytes * 8) / op->dummy.buswidth;
 
 	switch (width) {
 	case SPI_NBITS_SINGLE:
@@ -397,11 +396,10 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
 }
 
 static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi,
-				      struct spi_flash_read_message *msg,
-				      int hp)
+				      const struct spi_mem_op *op, int hp)
 {
-	int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
-	int addrlen = msg->addr_width;
+	int width = op->data.buswidth ? op->data.buswidth : SPI_NBITS_SINGLE;
+	int addrlen = op->addr.nbytes;
 	u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
 
 	dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n",
@@ -437,17 +435,17 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi,
 	/* set the override mode */
 	data |=	BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
 	bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data);
-	bcm_qspi_bspi_set_xfer_params(qspi, msg->read_opcode, 0, 0, 0);
+	bcm_qspi_bspi_set_xfer_params(qspi, op->cmd.opcode, 0, 0, 0);
 
 	return 0;
 }
 
 static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
-				  struct spi_flash_read_message *msg, int hp)
+				  const struct spi_mem_op *op, int hp)
 {
 	int error = 0;
-	int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
-	int addrlen = msg->addr_width;
+	int width = op->data.buswidth ? op->data.buswidth : SPI_NBITS_SINGLE;
+	int addrlen = op->addr.nbytes;
 
 	/* default mode */
 	qspi->xfer_mode.flex_mode = true;
@@ -460,12 +458,12 @@ static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
 		if (val & mask || qspi->s3_strap_override_ctrl & mask) {
 			qspi->xfer_mode.flex_mode = false;
 			bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0);
-			error = bcm_qspi_bspi_set_override(qspi, msg, hp);
+			error = bcm_qspi_bspi_set_override(qspi, op, hp);
 		}
 	}
 
 	if (qspi->xfer_mode.flex_mode)
-		error = bcm_qspi_bspi_set_flex_mode(qspi, msg, hp);
+		error = bcm_qspi_bspi_set_flex_mode(qspi, op, hp);
 
 	if (error) {
 		dev_warn(&qspi->pdev->dev,
@@ -802,19 +800,20 @@ done:
 	return slot;
 }
 
-static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
-				    struct spi_flash_read_message *msg)
+static int bcm_qspi_bspi_exec_mem_op(struct spi_device *spi,
+				     const struct spi_mem_op *op)
 {
 	struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
-	u32 addr = 0, len, rdlen, len_words;
+	u32 addr = 0, len, rdlen, len_words, from = 0;
 	int ret = 0;
 	unsigned long timeo = msecs_to_jiffies(100);
 	struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
 
 	if (bcm_qspi_bspi_ver_three(qspi))
-		if (msg->addr_width == BSPI_ADDRLEN_4BYTES)
+		if (op->addr.nbytes == BSPI_ADDRLEN_4BYTES)
 			return -EIO;
 
+	from = op->addr.val;
 	bcm_qspi_chip_select(qspi, spi->chip_select);
 	bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
 
@@ -823,15 +822,15 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
 	 * the upper address byte to bspi
 	 */
 	if (bcm_qspi_bspi_ver_three(qspi) == false) {
-		addr = msg->from & 0xff000000;
+		addr = from & 0xff000000;
 		bcm_qspi_write(qspi, BSPI,
 			       BSPI_BSPI_FLASH_UPPER_ADDR_BYTE, addr);
 	}
 
 	if (!qspi->xfer_mode.flex_mode)
-		addr = msg->from;
+		addr = from;
 	else
-		addr = msg->from & 0x00ffffff;
+		addr = from & 0x00ffffff;
 
 	if (bcm_qspi_bspi_ver_three(qspi) == true)
 		addr = (addr + 0xc00000) & 0xffffff;
@@ -840,8 +839,8 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
 	 * read into the entire buffer by breaking the reads
 	 * into RAF buffer read lengths
 	 */
-	len = msg->len;
-	qspi->bspi_rf_msg_idx = 0;
+	len = op->data.nbytes;
+	qspi->bspi_rf_op_idx = 0;
 
 	do {
 		if (len > BSPI_READ_LENGTH)
@@ -852,9 +851,9 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
 		reinit_completion(&qspi->bspi_done);
 		bcm_qspi_enable_bspi(qspi);
 		len_words = (rdlen + 3) >> 2;
-		qspi->bspi_rf_msg = msg;
-		qspi->bspi_rf_msg_status = 0;
-		qspi->bspi_rf_msg_len = rdlen;
+		qspi->bspi_rf_op = op;
+		qspi->bspi_rf_op_status = 0;
+		qspi->bspi_rf_op_len = rdlen;
 		dev_dbg(&qspi->pdev->dev,
 			"bspi xfr addr 0x%x len 0x%x", addr, rdlen);
 		bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
@@ -879,7 +878,6 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
 		}
 
 		/* set msg return length */
-		msg->retlen += rdlen;
 		addr += rdlen;
 		len -= rdlen;
 	} while (len);
@@ -914,61 +912,63 @@ static int bcm_qspi_transfer_one(struct spi_master *master,
 	return 0;
 }
 
-static int bcm_qspi_mspi_flash_read(struct spi_device *spi,
-				    struct spi_flash_read_message *msg)
+static int bcm_qspi_mspi_exec_mem_op(struct spi_device *spi,
+				     const struct spi_mem_op *op)
 {
-	struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
+	struct spi_master *master = spi->master;
+	struct bcm_qspi *qspi = spi_master_get_devdata(master);
 	struct spi_transfer t[2];
-	u8 cmd[6];
-	int ret;
+	u8 cmd[6] = { };
+	int ret, i;
 
 	memset(cmd, 0, sizeof(cmd));
 	memset(t, 0, sizeof(t));
 
 	/* tx */
 	/* opcode is in cmd[0] */
-	cmd[0] = msg->read_opcode;
-	cmd[1] = msg->from >> (msg->addr_width * 8 -  8);
-	cmd[2] = msg->from >> (msg->addr_width * 8 - 16);
-	cmd[3] = msg->from >> (msg->addr_width * 8 - 24);
-	cmd[4] = msg->from >> (msg->addr_width * 8 - 32);
+	cmd[0] = op->cmd.opcode;
+	for (i = 0; i < op->addr.nbytes; i++)
+		cmd[1 + i] = op->addr.val >> (8 * (op->addr.nbytes - i - 1));
+
 	t[0].tx_buf = cmd;
-	t[0].len = msg->addr_width + msg->dummy_bytes + 1;
+	t[0].len = op->addr.nbytes + op->dummy.nbytes + 1;
 	t[0].bits_per_word = spi->bits_per_word;
-	t[0].tx_nbits = msg->opcode_nbits;
+	t[0].tx_nbits = op->cmd.buswidth;
 	/* lets mspi know that this is not last transfer */
 	qspi->trans_pos.mspi_last_trans = false;
-	ret = bcm_qspi_transfer_one(spi->master, spi, &t[0]);
+	ret = bcm_qspi_transfer_one(master, spi, &t[0]);
 
 	/* rx */
 	qspi->trans_pos.mspi_last_trans = true;
 	if (!ret) {
 		/* rx */
-		t[1].rx_buf = msg->buf;
-		t[1].len = msg->len;
-		t[1].rx_nbits =  msg->data_nbits;
+		t[1].rx_buf = op->data.buf.in;
+		t[1].len = op->data.nbytes;
+		t[1].rx_nbits =  op->data.buswidth;
 		t[1].bits_per_word = spi->bits_per_word;
-		ret = bcm_qspi_transfer_one(spi->master, spi, &t[1]);
+		ret = bcm_qspi_transfer_one(master, spi, &t[1]);
 	}
 
-	if (!ret)
-		msg->retlen = msg->len;
-
 	return ret;
 }
 
-static int bcm_qspi_flash_read(struct spi_device *spi,
-			       struct spi_flash_read_message *msg)
+static int bcm_qspi_exec_mem_op(struct spi_mem *mem,
+				const struct spi_mem_op *op)
 {
+	struct spi_device *spi = mem->spi;
 	struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
 	int ret = 0;
 	bool mspi_read = false;
-	u32 addr, len;
+	u32 addr = 0, len;
 	u_char *buf;
 
-	buf = msg->buf;
-	addr = msg->from;
-	len = msg->len;
+	if (!op->data.nbytes || !op->addr.nbytes || op->addr.nbytes > 4 ||
+	    op->data.dir != SPI_MEM_DATA_IN)
+		return -ENOTSUPP;
+
+	buf = op->data.buf.in;
+	addr = op->addr.val;
+	len = op->data.nbytes;
 
 	if (bcm_qspi_bspi_ver_three(qspi) == true) {
 		/*
@@ -990,12 +990,12 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
 		mspi_read = true;
 
 	if (mspi_read)
-		return bcm_qspi_mspi_flash_read(spi, msg);
+		return bcm_qspi_mspi_exec_mem_op(spi, op);
 
-	ret = bcm_qspi_bspi_set_mode(qspi, msg, -1);
+	ret = bcm_qspi_bspi_set_mode(qspi, op, -1);
 
 	if (!ret)
-		ret = bcm_qspi_bspi_flash_read(spi, msg);
+		ret = bcm_qspi_bspi_exec_mem_op(spi, op);
 
 	return ret;
 }
@@ -1034,10 +1034,10 @@ static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id)
 	struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
 	u32 status = qspi_dev_id->irqp->mask;
 
-	if (qspi->bspi_enabled && qspi->bspi_rf_msg) {
+	if (qspi->bspi_enabled && qspi->bspi_rf_op) {
 		bcm_qspi_bspi_lr_data_read(qspi);
-		if (qspi->bspi_rf_msg_len == 0) {
-			qspi->bspi_rf_msg = NULL;
+		if (qspi->bspi_rf_op_len == 0) {
+			qspi->bspi_rf_op = NULL;
 			if (qspi->soc_intc) {
 				/* disable soc BSPI interrupt */
 				soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE,
@@ -1046,7 +1046,7 @@ static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id)
 				status = INTR_BSPI_LR_SESSION_DONE_MASK;
 			}
 
-			if (qspi->bspi_rf_msg_status)
+			if (qspi->bspi_rf_op_status)
 				bcm_qspi_bspi_lr_clear(qspi);
 			else
 				bcm_qspi_bspi_flush_prefetch_buffers(qspi);
@@ -1058,7 +1058,7 @@ static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id)
 	}
 
 	status &= INTR_BSPI_LR_SESSION_DONE_MASK;
-	if (qspi->bspi_enabled && status && qspi->bspi_rf_msg_len == 0)
+	if (qspi->bspi_enabled && status && qspi->bspi_rf_op_len == 0)
 		complete(&qspi->bspi_done);
 
 	return IRQ_HANDLED;
@@ -1071,7 +1071,7 @@ static irqreturn_t bcm_qspi_bspi_lr_err_l2_isr(int irq, void *dev_id)
 	struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
 
 	dev_err(&qspi->pdev->dev, "BSPI INT error\n");
-	qspi->bspi_rf_msg_status = -EIO;
+	qspi->bspi_rf_op_status = -EIO;
 	if (qspi->soc_intc)
 		/* clear soc interrupt */
 		soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_ERR);
@@ -1194,6 +1194,10 @@ static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
 
 }
 
+static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
+	.exec_op = bcm_qspi_exec_mem_op,
+};
+
 static const struct of_device_id bcm_qspi_of_match[] = {
 	{ .compatible = "brcm,spi-bcm-qspi" },
 	{},
@@ -1236,7 +1240,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD;
 	master->setup = bcm_qspi_setup;
 	master->transfer_one = bcm_qspi_transfer_one;
-	master->spi_flash_read = bcm_qspi_flash_read;
+	master->mem_ops = &bcm_qspi_mem_ops;
 	master->cleanup = bcm_qspi_cleanup;
 	master->dev.of_node = dev->of_node;
 	master->num_chipselect = NUM_CHIPSELECT;
diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c
deleted file mode 100644
index d02ceb7a29d1..000000000000
--- a/drivers/spi/spi-bcm53xx.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Copyright (C) 2014-2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/bcma/bcma.h>
-#include <linux/spi/spi.h>
-
-#include "spi-bcm53xx.h"
-
-#define BCM53XXSPI_MAX_SPI_BAUD	13500000	/* 216 MHz? */
-#define BCM53XXSPI_FLASH_WINDOW	SZ_32M
-
-/* The longest observed required wait was 19 ms */
-#define BCM53XXSPI_SPE_TIMEOUT_MS	80
-
-struct bcm53xxspi {
-	struct bcma_device *core;
-	struct spi_master *master;
-	void __iomem *mmio_base;
-	bool bspi;				/* Boot SPI mode with memory mapping */
-};
-
-static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset)
-{
-	return bcma_read32(b53spi->core, offset);
-}
-
-static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset,
-				    u32 value)
-{
-	bcma_write32(b53spi->core, offset, value);
-}
-
-static void bcm53xxspi_disable_bspi(struct bcm53xxspi *b53spi)
-{
-	struct device *dev = &b53spi->core->dev;
-	unsigned long deadline;
-	u32 tmp;
-
-	if (!b53spi->bspi)
-		return;
-
-	tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL);
-	if (tmp & 0x1)
-		return;
-
-	deadline = jiffies + usecs_to_jiffies(200);
-	do {
-		tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_BUSY_STATUS);
-		if (!(tmp & 0x1)) {
-			bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL,
-					 0x1);
-			ndelay(200);
-			b53spi->bspi = false;
-			return;
-		}
-		udelay(1);
-	} while (!time_after_eq(jiffies, deadline));
-
-	dev_warn(dev, "Timeout disabling BSPI\n");
-}
-
-static void bcm53xxspi_enable_bspi(struct bcm53xxspi *b53spi)
-{
-	u32 tmp;
-
-	if (b53spi->bspi)
-		return;
-
-	tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL);
-	if (!(tmp & 0x1))
-		return;
-
-	bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL, 0x0);
-	b53spi->bspi = true;
-}
-
-static inline unsigned int bcm53xxspi_calc_timeout(size_t len)
-{
-	/* Do some magic calculation based on length and buad. Add 10% and 1. */
-	return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1;
-}
-
-static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
-{
-	unsigned long deadline;
-	u32 tmp;
-
-	/* SPE bit has to be 0 before we read MSPI STATUS */
-	deadline = jiffies + msecs_to_jiffies(BCM53XXSPI_SPE_TIMEOUT_MS);
-	do {
-		tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
-		if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
-			break;
-		udelay(5);
-	} while (!time_after_eq(jiffies, deadline));
-
-	if (tmp & B53SPI_MSPI_SPCR2_SPE)
-		goto spi_timeout;
-
-	/* Check status */
-	deadline = jiffies + msecs_to_jiffies(timeout_ms);
-	do {
-		tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
-		if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {
-			bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
-			return 0;
-		}
-
-		cpu_relax();
-		udelay(100);
-	} while (!time_after_eq(jiffies, deadline));
-
-spi_timeout:
-	bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
-
-	pr_err("Timeout waiting for SPI to be ready!\n");
-
-	return -EBUSY;
-}
-
-static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
-				 size_t len, bool cont)
-{
-	u32 tmp;
-	int i;
-
-	for (i = 0; i < len; i++) {
-		/* Transmit Register File MSB */
-		bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2),
-				 (unsigned int)w_buf[i]);
-	}
-
-	for (i = 0; i < len; i++) {
-		tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
-		      B53SPI_CDRAM_PCS_DSCK;
-		if (!cont && i == len - 1)
-			tmp &= ~B53SPI_CDRAM_CONT;
-		tmp &= ~0x1;
-		/* Command Register File */
-		bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
-	}
-
-	/* Set queue pointers */
-	bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
-	bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
-
-	if (cont)
-		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
-
-	/* Start SPI transfer */
-	tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
-	tmp |= B53SPI_MSPI_SPCR2_SPE;
-	if (cont)
-		tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
-	bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
-
-	/* Wait for SPI to finish */
-	bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
-
-	if (!cont)
-		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-}
-
-static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
-				size_t len, bool cont)
-{
-	u32 tmp;
-	int i;
-
-	for (i = 0; i < len; i++) {
-		tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
-		      B53SPI_CDRAM_PCS_DSCK;
-		if (!cont && i == len - 1)
-			tmp &= ~B53SPI_CDRAM_CONT;
-		tmp &= ~0x1;
-		/* Command Register File */
-		bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
-	}
-
-	/* Set queue pointers */
-	bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
-	bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
-
-	if (cont)
-		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
-
-	/* Start SPI transfer */
-	tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
-	tmp |= B53SPI_MSPI_SPCR2_SPE;
-	if (cont)
-		tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
-	bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
-
-	/* Wait for SPI to finish */
-	bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
-
-	if (!cont)
-		bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-
-	for (i = 0; i < len; ++i) {
-		u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2);
-
-		/* Data stored in the transmit register file LSB */
-		r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg);
-	}
-}
-
-static int bcm53xxspi_transfer_one(struct spi_master *master,
-				   struct spi_device *spi,
-				   struct spi_transfer *t)
-{
-	struct bcm53xxspi *b53spi = spi_master_get_devdata(master);
-	u8 *buf;
-	size_t left;
-
-	bcm53xxspi_disable_bspi(b53spi);
-
-	if (t->tx_buf) {
-		buf = (u8 *)t->tx_buf;
-		left = t->len;
-		while (left) {
-			size_t to_write = min_t(size_t, 16, left);
-			bool cont = !spi_transfer_is_last(master, t) ||
-				    left - to_write > 0;
-
-			bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
-			left -= to_write;
-			buf += to_write;
-		}
-	}
-
-	if (t->rx_buf) {
-		buf = (u8 *)t->rx_buf;
-		left = t->len;
-		while (left) {
-			size_t to_read = min_t(size_t, 16, left);
-			bool cont = !spi_transfer_is_last(master, t) ||
-				    left - to_read > 0;
-
-			bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
-			left -= to_read;
-			buf += to_read;
-		}
-	}
-
-	return 0;
-}
-
-static int bcm53xxspi_flash_read(struct spi_device *spi,
-				 struct spi_flash_read_message *msg)
-{
-	struct bcm53xxspi *b53spi = spi_master_get_devdata(spi->master);
-	int ret = 0;
-
-	if (msg->from + msg->len > BCM53XXSPI_FLASH_WINDOW)
-		return -EINVAL;
-
-	bcm53xxspi_enable_bspi(b53spi);
-	memcpy_fromio(msg->buf, b53spi->mmio_base + msg->from, msg->len);
-	msg->retlen = msg->len;
-
-	return ret;
-}
-
-/**************************************************
- * BCMA
- **************************************************/
-
-static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
-	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
-	{},
-};
-MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl);
-
-static int bcm53xxspi_bcma_probe(struct bcma_device *core)
-{
-	struct device *dev = &core->dev;
-	struct bcm53xxspi *b53spi;
-	struct spi_master *master;
-	int err;
-
-	if (core->bus->drv_cc.core->id.rev != 42) {
-		pr_err("SPI on SoC with unsupported ChipCommon rev\n");
-		return -ENOTSUPP;
-	}
-
-	master = spi_alloc_master(dev, sizeof(*b53spi));
-	if (!master)
-		return -ENOMEM;
-
-	b53spi = spi_master_get_devdata(master);
-	b53spi->master = master;
-	b53spi->core = core;
-
-	if (core->addr_s[0])
-		b53spi->mmio_base = devm_ioremap(dev, core->addr_s[0],
-						 BCM53XXSPI_FLASH_WINDOW);
-	b53spi->bspi = true;
-	bcm53xxspi_disable_bspi(b53spi);
-
-	master->dev.of_node = dev->of_node;
-	master->transfer_one = bcm53xxspi_transfer_one;
-	if (b53spi->mmio_base)
-		master->spi_flash_read = bcm53xxspi_flash_read;
-
-	bcma_set_drvdata(core, b53spi);
-
-	err = devm_spi_register_master(dev, master);
-	if (err) {
-		spi_master_put(master);
-		bcma_set_drvdata(core, NULL);
-		return err;
-	}
-
-	return 0;
-}
-
-static struct bcma_driver bcm53xxspi_bcma_driver = {
-	.name		= KBUILD_MODNAME,
-	.id_table	= bcm53xxspi_bcma_tbl,
-	.probe		= bcm53xxspi_bcma_probe,
-};
-
-/**************************************************
- * Init & exit
- **************************************************/
-
-static int __init bcm53xxspi_module_init(void)
-{
-	int err = 0;
-
-	err = bcma_driver_register(&bcm53xxspi_bcma_driver);
-	if (err)
-		pr_err("Failed to register bcma driver: %d\n", err);
-
-	return err;
-}
-
-static void __exit bcm53xxspi_module_exit(void)
-{
-	bcma_driver_unregister(&bcm53xxspi_bcma_driver);
-}
-
-module_init(bcm53xxspi_module_init);
-module_exit(bcm53xxspi_module_exit);
-
-MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver");
-MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-bcm53xx.h b/drivers/spi/spi-bcm53xx.h
deleted file mode 100644
index 03e3442086ec..000000000000
--- a/drivers/spi/spi-bcm53xx.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef SPI_BCM53XX_H
-#define SPI_BCM53XX_H
-
-#define B53SPI_BSPI_REVISION_ID			0x000
-#define B53SPI_BSPI_SCRATCH			0x004
-#define B53SPI_BSPI_MAST_N_BOOT_CTRL		0x008
-#define B53SPI_BSPI_BUSY_STATUS			0x00c
-#define B53SPI_BSPI_INTR_STATUS			0x010
-#define B53SPI_BSPI_B0_STATUS			0x014
-#define B53SPI_BSPI_B0_CTRL			0x018
-#define B53SPI_BSPI_B1_STATUS			0x01c
-#define B53SPI_BSPI_B1_CTRL			0x020
-#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL		0x024
-#define B53SPI_BSPI_FLEX_MODE_ENABLE		0x028
-#define B53SPI_BSPI_BITS_PER_CYCLE		0x02c
-#define B53SPI_BSPI_BITS_PER_PHASE		0x030
-#define B53SPI_BSPI_CMD_AND_MODE_BYTE		0x034
-#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE	0x038
-#define B53SPI_BSPI_BSPI_XOR_VALUE		0x03c
-#define B53SPI_BSPI_BSPI_XOR_ENABLE		0x040
-#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE	0x044
-#define B53SPI_BSPI_BSPI_PIO_IODIR		0x048
-#define B53SPI_BSPI_BSPI_PIO_DATA		0x04c
-
-/* RAF */
-#define B53SPI_RAF_START_ADDR			0x100
-#define B53SPI_RAF_NUM_WORDS			0x104
-#define B53SPI_RAF_CTRL				0x108
-#define B53SPI_RAF_FULLNESS			0x10c
-#define B53SPI_RAF_WATERMARK			0x110
-#define B53SPI_RAF_STATUS			0x114
-#define B53SPI_RAF_READ_DATA			0x118
-#define B53SPI_RAF_WORD_CNT			0x11c
-#define B53SPI_RAF_CURR_ADDR			0x120
-
-/* MSPI */
-#define B53SPI_MSPI_SPCR0_LSB			0x200
-#define B53SPI_MSPI_SPCR0_MSB			0x204
-#define B53SPI_MSPI_SPCR1_LSB			0x208
-#define B53SPI_MSPI_SPCR1_MSB			0x20c
-#define B53SPI_MSPI_NEWQP			0x210
-#define B53SPI_MSPI_ENDQP			0x214
-#define B53SPI_MSPI_SPCR2			0x218
-#define  B53SPI_MSPI_SPCR2_SPE			0x00000040
-#define  B53SPI_MSPI_SPCR2_CONT_AFTER_CMD	0x00000080
-#define B53SPI_MSPI_MSPI_STATUS			0x220
-#define  B53SPI_MSPI_MSPI_STATUS_SPIF		0x00000001
-#define B53SPI_MSPI_CPTQP			0x224
-#define B53SPI_MSPI_TXRAM			0x240 /* 32 registers, up to 0x2b8 */
-#define B53SPI_MSPI_RXRAM			0x2c0 /* 32 registers, up to 0x33c */
-#define B53SPI_MSPI_CDRAM			0x340 /* 16 registers, up to 0x37c */
-#define  B53SPI_CDRAM_PCS_PCS0			0x00000001
-#define  B53SPI_CDRAM_PCS_PCS1			0x00000002
-#define  B53SPI_CDRAM_PCS_PCS2			0x00000004
-#define  B53SPI_CDRAM_PCS_PCS3			0x00000008
-#define  B53SPI_CDRAM_PCS_DISABLE_ALL		0x0000000f
-#define  B53SPI_CDRAM_PCS_DSCK			0x00000010
-#define  B53SPI_CDRAM_BITSE			0x00000040
-#define  B53SPI_CDRAM_CONT			0x00000080
-#define B53SPI_MSPI_WRITE_LOCK			0x380
-#define B53SPI_MSPI_DISABLE_FLUSH_GEN		0x384
-
-/* Interrupt */
-#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED	0x3a0
-#define B53SPI_INTR_RAF_LR_TRUNCATED		0x3a4
-#define B53SPI_INTR_RAF_LR_IMPATIENT		0x3a8
-#define B53SPI_INTR_RAF_LR_SESSION_DONE		0x3ac
-#define B53SPI_INTR_RAF_LR_OVERREAD		0x3b0
-#define B53SPI_INTR_MSPI_DONE			0x3b4
-#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE	0x3b8
-
-#endif /* SPI_BCM53XX_H */
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index cbcba614b253..c23849f7aa7b 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -352,22 +352,31 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
 	rate = clk_get_rate(clk);
 	if (!rate) {
 		struct clk *pll_clk = devm_clk_get(dev, "pll");
 
-		if (IS_ERR(pll_clk))
-			return PTR_ERR(pll_clk);
+		if (IS_ERR(pll_clk)) {
+			ret = PTR_ERR(pll_clk);
+			goto out_disable_clk;
+		}
+
+		ret = clk_prepare_enable(pll_clk);
+		if (ret)
+			goto out_disable_clk;
 
 		rate = clk_get_rate(pll_clk);
-		if (!rate)
-			return -EINVAL;
+		clk_disable_unprepare(pll_clk);
+		if (!rate) {
+			ret = -EINVAL;
+			goto out_disable_clk;
+		}
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret)
-		return ret;
-
 	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
 	if (!master) {
 		ret = -ENOMEM;
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index 4a001634023e..f3dad6fcdc35 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -694,8 +694,7 @@ static int cdns_spi_remove(struct platform_device *pdev)
  */
 static int __maybe_unused cdns_spi_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct spi_master *master = platform_get_drvdata(pdev);
+	struct spi_master *master = dev_get_drvdata(dev);
 
 	return spi_master_suspend(master);
 }
@@ -710,8 +709,7 @@ static int __maybe_unused cdns_spi_suspend(struct device *dev)
  */
 static int __maybe_unused cdns_spi_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct spi_master *master = platform_get_drvdata(pdev);
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct cdns_spi *xspi = spi_master_get_devdata(master);
 
 	cdns_spi_init_hw(xspi);
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index cb3c73007ca1..e6d5cc6ab108 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -1,19 +1,8 @@
-/*
- * Freescale i.MX7ULP LPSPI driver
- *
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Freescale i.MX7ULP LPSPI driver
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
 
 #include <linux/clk.h>
 #include <linux/completion.h>
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index a056ee88a960..866246f21041 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1,22 +1,6 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 Juergen Beisert
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation
- * 51 Franklin Street, Fifth Floor
- * Boston, MA  02110-1301, USA.
- */
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+// Copyright (C) 2008 Juergen Beisert
 
 #include <linux/clk.h>
 #include <linux/completion.h>
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
new file mode 100644
index 000000000000..990770dfa5cf
--- /dev/null
+++ b/drivers/spi/spi-mem.c
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Exceet Electronics GmbH
+ * Copyright (C) 2018 Bootlin
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+#include <linux/dmaengine.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#include "internals.h"
+
+/**
+ * spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a
+ *					  memory operation
+ * @ctlr: the SPI controller requesting this dma_map()
+ * @op: the memory operation containing the buffer to map
+ * @sgt: a pointer to a non-initialized sg_table that will be filled by this
+ *	 function
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares everything for you and provides a ready-to-use
+ * sg_table. This function is not intended to be called from spi drivers.
+ * Only SPI controller drivers should use it.
+ * Note that the caller must ensure the memory region pointed by
+ * op->data.buf.{in,out} is DMA-able before calling this function.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+				       const struct spi_mem_op *op,
+				       struct sg_table *sgt)
+{
+	struct device *dmadev;
+
+	if (!op->data.nbytes)
+		return -EINVAL;
+
+	if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+		dmadev = ctlr->dma_tx->device->dev;
+	else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+		dmadev = ctlr->dma_rx->device->dev;
+	else
+		dmadev = ctlr->dev.parent;
+
+	if (!dmadev)
+		return -EINVAL;
+
+	return spi_map_buf(ctlr, dmadev, sgt, op->data.buf.in, op->data.nbytes,
+			   op->data.dir == SPI_MEM_DATA_IN ?
+			   DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_map_mem_op_data);
+
+/**
+ * spi_controller_dma_unmap_mem_op_data() - DMA-unmap the buffer attached to a
+ *					    memory operation
+ * @ctlr: the SPI controller requesting this dma_unmap()
+ * @op: the memory operation containing the buffer to unmap
+ * @sgt: a pointer to an sg_table previously initialized by
+ *	 spi_controller_dma_map_mem_op_data()
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares things so that the CPU can access the
+ * op->data.buf.{in,out} buffer again.
+ *
+ * This function is not intended to be called from SPI drivers. Only SPI
+ * controller drivers should use it.
+ *
+ * This function should be called after the DMA operation has finished and is
+ * only valid if the previous spi_controller_dma_map_mem_op_data() call
+ * returned 0.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+					  const struct spi_mem_op *op,
+					  struct sg_table *sgt)
+{
+	struct device *dmadev;
+
+	if (!op->data.nbytes)
+		return;
+
+	if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+		dmadev = ctlr->dma_tx->device->dev;
+	else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+		dmadev = ctlr->dma_rx->device->dev;
+	else
+		dmadev = ctlr->dev.parent;
+
+	spi_unmap_buf(ctlr, dmadev, sgt,
+		      op->data.dir == SPI_MEM_DATA_IN ?
+		      DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_unmap_mem_op_data);
+
+static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
+{
+	u32 mode = mem->spi->mode;
+
+	switch (buswidth) {
+	case 1:
+		return 0;
+
+	case 2:
+		if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
+		    (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
+			return 0;
+
+		break;
+
+	case 4:
+		if ((tx && (mode & SPI_TX_QUAD)) ||
+		    (!tx && (mode & SPI_RX_QUAD)))
+			return 0;
+
+		break;
+
+	default:
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+
+static bool spi_mem_default_supports_op(struct spi_mem *mem,
+					const struct spi_mem_op *op)
+{
+	if (spi_check_buswidth_req(mem, op->cmd.buswidth, true))
+		return false;
+
+	if (op->addr.nbytes &&
+	    spi_check_buswidth_req(mem, op->addr.buswidth, true))
+		return false;
+
+	if (op->dummy.nbytes &&
+	    spi_check_buswidth_req(mem, op->dummy.buswidth, true))
+		return false;
+
+	if (op->data.nbytes &&
+	    spi_check_buswidth_req(mem, op->data.buswidth,
+				   op->data.dir == SPI_MEM_DATA_OUT))
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
+
+/**
+ * spi_mem_supports_op() - Check if a memory device and the controller it is
+ *			   connected to support a specific memory operation
+ * @mem: the SPI memory
+ * @op: the memory operation to check
+ *
+ * Some controllers are only supporting Single or Dual IOs, others might only
+ * support specific opcodes, or it can even be that the controller and device
+ * both support Quad IOs but the hardware prevents you from using it because
+ * only 2 IO lines are connected.
+ *
+ * This function checks whether a specific operation is supported.
+ *
+ * Return: true if @op is supported, false otherwise.
+ */
+bool spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct spi_controller *ctlr = mem->spi->controller;
+
+	if (ctlr->mem_ops && ctlr->mem_ops->supports_op)
+		return ctlr->mem_ops->supports_op(mem, op);
+
+	return spi_mem_default_supports_op(mem, op);
+}
+EXPORT_SYMBOL_GPL(spi_mem_supports_op);
+
+/**
+ * spi_mem_exec_op() - Execute a memory operation
+ * @mem: the SPI memory
+ * @op: the memory operation to execute
+ *
+ * Executes a memory operation.
+ *
+ * This function first checks that @op is supported and then tries to execute
+ * it.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	unsigned int tmpbufsize, xferpos = 0, totalxferlen = 0;
+	struct spi_controller *ctlr = mem->spi->controller;
+	struct spi_transfer xfers[4] = { };
+	struct spi_message msg;
+	u8 *tmpbuf;
+	int ret;
+
+	if (!spi_mem_supports_op(mem, op))
+		return -ENOTSUPP;
+
+	if (ctlr->mem_ops) {
+		/*
+		 * Flush the message queue before executing our SPI memory
+		 * operation to prevent preemption of regular SPI transfers.
+		 */
+		spi_flush_queue(ctlr);
+
+		if (ctlr->auto_runtime_pm) {
+			ret = pm_runtime_get_sync(ctlr->dev.parent);
+			if (ret < 0) {
+				dev_err(&ctlr->dev,
+					"Failed to power device: %d\n",
+					ret);
+				return ret;
+			}
+		}
+
+		mutex_lock(&ctlr->bus_lock_mutex);
+		mutex_lock(&ctlr->io_mutex);
+		ret = ctlr->mem_ops->exec_op(mem, op);
+		mutex_unlock(&ctlr->io_mutex);
+		mutex_unlock(&ctlr->bus_lock_mutex);
+
+		if (ctlr->auto_runtime_pm)
+			pm_runtime_put(ctlr->dev.parent);
+
+		/*
+		 * Some controllers only optimize specific paths (typically the
+		 * read path) and expect the core to use the regular SPI
+		 * interface in other cases.
+		 */
+		if (!ret || ret != -ENOTSUPP)
+			return ret;
+	}
+
+	tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes +
+		     op->dummy.nbytes;
+
+	/*
+	 * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so
+	 * we're guaranteed that this buffer is DMA-able, as required by the
+	 * SPI layer.
+	 */
+	tmpbuf = kzalloc(tmpbufsize, GFP_KERNEL | GFP_DMA);
+	if (!tmpbuf)
+		return -ENOMEM;
+
+	spi_message_init(&msg);
+
+	tmpbuf[0] = op->cmd.opcode;
+	xfers[xferpos].tx_buf = tmpbuf;
+	xfers[xferpos].len = sizeof(op->cmd.opcode);
+	xfers[xferpos].tx_nbits = op->cmd.buswidth;
+	spi_message_add_tail(&xfers[xferpos], &msg);
+	xferpos++;
+	totalxferlen++;
+
+	if (op->addr.nbytes) {
+		int i;
+
+		for (i = 0; i < op->addr.nbytes; i++)
+			tmpbuf[i + 1] = op->addr.val >>
+					(8 * (op->addr.nbytes - i - 1));
+
+		xfers[xferpos].tx_buf = tmpbuf + 1;
+		xfers[xferpos].len = op->addr.nbytes;
+		xfers[xferpos].tx_nbits = op->addr.buswidth;
+		spi_message_add_tail(&xfers[xferpos], &msg);
+		xferpos++;
+		totalxferlen += op->addr.nbytes;
+	}
+
+	if (op->dummy.nbytes) {
+		memset(tmpbuf + op->addr.nbytes + 1, 0xff, op->dummy.nbytes);
+		xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes + 1;
+		xfers[xferpos].len = op->dummy.nbytes;
+		xfers[xferpos].tx_nbits = op->dummy.buswidth;
+		spi_message_add_tail(&xfers[xferpos], &msg);
+		xferpos++;
+		totalxferlen += op->dummy.nbytes;
+	}
+
+	if (op->data.nbytes) {
+		if (op->data.dir == SPI_MEM_DATA_IN) {
+			xfers[xferpos].rx_buf = op->data.buf.in;
+			xfers[xferpos].rx_nbits = op->data.buswidth;
+		} else {
+			xfers[xferpos].tx_buf = op->data.buf.out;
+			xfers[xferpos].tx_nbits = op->data.buswidth;
+		}
+
+		xfers[xferpos].len = op->data.nbytes;
+		spi_message_add_tail(&xfers[xferpos], &msg);
+		xferpos++;
+		totalxferlen += op->data.nbytes;
+	}
+
+	ret = spi_sync(mem->spi, &msg);
+
+	kfree(tmpbuf);
+
+	if (ret)
+		return ret;
+
+	if (msg.actual_length != totalxferlen)
+		return -EIO;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_exec_op);
+
+/**
+ * spi_mem_adjust_op_size() - Adjust the data size of a SPI mem operation to
+ *			      match controller limitations
+ * @mem: the SPI memory
+ * @op: the operation to adjust
+ *
+ * Some controllers have FIFO limitations and must split a data transfer
+ * operation into multiple ones, others require a specific alignment for
+ * optimized accesses. This function allows SPI mem drivers to split a single
+ * operation into multiple sub-operations when required.
+ *
+ * Return: a negative error code if the controller can't properly adjust @op,
+ *	   0 otherwise. Note that @op->data.nbytes will be updated if @op
+ *	   can't be handled in a single step.
+ */
+int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
+{
+	struct spi_controller *ctlr = mem->spi->controller;
+
+	if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size)
+		return ctlr->mem_ops->adjust_op_size(mem, op);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);
+
+static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
+{
+	return container_of(drv, struct spi_mem_driver, spidrv.driver);
+}
+
+static int spi_mem_probe(struct spi_device *spi)
+{
+	struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+	struct spi_mem *mem;
+
+	mem = devm_kzalloc(&spi->dev, sizeof(*mem), GFP_KERNEL);
+	if (!mem)
+		return -ENOMEM;
+
+	mem->spi = spi;
+	spi_set_drvdata(spi, mem);
+
+	return memdrv->probe(mem);
+}
+
+static int spi_mem_remove(struct spi_device *spi)
+{
+	struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+	struct spi_mem *mem = spi_get_drvdata(spi);
+
+	if (memdrv->remove)
+		return memdrv->remove(mem);
+
+	return 0;
+}
+
+static void spi_mem_shutdown(struct spi_device *spi)
+{
+	struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+	struct spi_mem *mem = spi_get_drvdata(spi);
+
+	if (memdrv->shutdown)
+		memdrv->shutdown(mem);
+}
+
+/**
+ * spi_mem_driver_register_with_owner() - Register a SPI memory driver
+ * @memdrv: the SPI memory driver to register
+ * @owner: the owner of this driver
+ *
+ * Registers a SPI memory driver.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+
+int spi_mem_driver_register_with_owner(struct spi_mem_driver *memdrv,
+				       struct module *owner)
+{
+	memdrv->spidrv.probe = spi_mem_probe;
+	memdrv->spidrv.remove = spi_mem_remove;
+	memdrv->spidrv.shutdown = spi_mem_shutdown;
+
+	return __spi_register_driver(owner, &memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_register_with_owner);
+
+/**
+ * spi_mem_driver_unregister_with_owner() - Unregister a SPI memory driver
+ * @memdrv: the SPI memory driver to unregister
+ *
+ * Unregisters a SPI memory driver.
+ */
+void spi_mem_driver_unregister(struct spi_mem_driver *memdrv)
+{
+	spi_unregister_driver(&memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_unregister);
diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index 5c82910e3480..7fe4488ace57 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -574,10 +574,15 @@ static int meson_spicc_probe(struct platform_device *pdev)
 		master->max_speed_hz = rate >> 2;
 
 	ret = devm_spi_register_master(&pdev->dev, master);
-	if (!ret)
-		return 0;
+	if (ret) {
+		dev_err(&pdev->dev, "spi master registration failed\n");
+		goto out_clk;
+	}
 
-	dev_err(&pdev->dev, "spi master registration failed\n");
+	return 0;
+
+out_clk:
+	clk_disable_unprepare(spicc->core);
 
 out_master:
 	spi_master_put(master);
diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c
index e8b59ce4dc3a..0e55784a3ad9 100644
--- a/drivers/spi/spi-mpc52xx.c
+++ b/drivers/spi/spi-mpc52xx.c
@@ -447,7 +447,7 @@ static int mpc52xx_spi_probe(struct platform_device *op)
 
 		for (i = 0; i < ms->gpio_cs_count; i++) {
 			gpio_cs = of_get_gpio(op->dev.of_node, i);
-			if (gpio_cs < 0) {
+			if (!gpio_is_valid(gpio_cs)) {
 				dev_err(&op->dev,
 					"could not parse the gpio field in oftree\n");
 				rc = -ENODEV;
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index 3d216b950b41..6ac95a2a21ce 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -1,32 +1,22 @@
-/*
- * Freescale MXS SPI master driver
- *
- * Copyright 2012 DENX Software Engineering, GmbH.
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * Rework and transition to new API by:
- * Marek Vasut <marex@denx.de>
- *
- * Based on previous attempt by:
- * Fabio Estevam <fabio.estevam@freescale.com>
- *
- * Based on code from U-Boot bootloader by:
- * Marek Vasut <marex@denx.de>
- *
- * Based on spi-stmp.c, which is:
- * Author: Dmitry Pervushin <dimka@embeddedalley.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Freescale MXS SPI master driver
+//
+// Copyright 2012 DENX Software Engineering, GmbH.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+//
+// Rework and transition to new API by:
+// Marek Vasut <marex@denx.de>
+//
+// Based on previous attempt by:
+// Fabio Estevam <fabio.estevam@freescale.com>
+//
+// Based on code from U-Boot bootloader by:
+// Marek Vasut <marex@denx.de>
+//
+// Based on spi-stmp.c, which is:
+// Author: Dmitry Pervushin <dimka@embeddedalley.com>
 
 #include <linux/kernel.h>
 #include <linux/ioport.h>
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 9bf64e6eca9b..6c628a54e946 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -255,6 +255,7 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
 	if (spi->controller_state) {
 		int err = pm_runtime_get_sync(mcspi->dev);
 		if (err < 0) {
+			pm_runtime_put_noidle(mcspi->dev);
 			dev_err(mcspi->dev, "failed to get sync: %d\n", err);
 			return;
 		}
@@ -350,20 +351,6 @@ disable_fifo:
 	mcspi->fifo_depth = 0;
 }
 
-static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi)
-{
-	struct spi_master	*spi_cntrl = mcspi->master;
-	struct omap2_mcspi_regs	*ctx = &mcspi->ctx;
-	struct omap2_mcspi_cs	*cs;
-
-	/* McSPI: context restore */
-	mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_MODULCTRL, ctx->modulctrl);
-	mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_WAKEUPENABLE, ctx->wakeupenable);
-
-	list_for_each_entry(cs, &ctx->cs, node)
-		writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
-}
-
 static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
 {
 	unsigned long timeout;
@@ -1065,8 +1052,11 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 	}
 
 	ret = pm_runtime_get_sync(mcspi->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(mcspi->dev);
+
 		return ret;
+	}
 
 	ret = omap2_mcspi_setup_transfer(spi, NULL);
 	pm_runtime_mark_last_busy(mcspi->dev);
@@ -1284,8 +1274,11 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
 	int			ret = 0;
 
 	ret = pm_runtime_get_sync(mcspi->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(mcspi->dev);
+
 		return ret;
+	}
 
 	mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
 			OMAP2_MCSPI_WAKEUPENABLE_WKEN);
@@ -1297,14 +1290,39 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
 	return 0;
 }
 
+/*
+ * When SPI wake up from off-mode, CS is in activate state. If it was in
+ * inactive state when driver was suspend, then force it to inactive state at
+ * wake up.
+ */
 static int omap_mcspi_runtime_resume(struct device *dev)
 {
-	struct omap2_mcspi	*mcspi;
-	struct spi_master	*master;
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+	struct omap2_mcspi_regs *ctx = &mcspi->ctx;
+	struct omap2_mcspi_cs *cs;
 
-	master = dev_get_drvdata(dev);
-	mcspi = spi_master_get_devdata(master);
-	omap2_mcspi_restore_ctx(mcspi);
+	/* McSPI: context restore */
+	mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, ctx->modulctrl);
+	mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, ctx->wakeupenable);
+
+	list_for_each_entry(cs, &ctx->cs, node) {
+		/*
+		 * We need to toggle CS state for OMAP take this
+		 * change in account.
+		 */
+		if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) {
+			cs->chconf0 |= OMAP2_MCSPI_CHCONF_FORCE;
+			writel_relaxed(cs->chconf0,
+				       cs->base + OMAP2_MCSPI_CHCONF0);
+			cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
+			writel_relaxed(cs->chconf0,
+				       cs->base + OMAP2_MCSPI_CHCONF0);
+		} else {
+			writel_relaxed(cs->chconf0,
+				       cs->base + OMAP2_MCSPI_CHCONF0);
+		}
+	}
 
 	return 0;
 }
@@ -1447,50 +1465,33 @@ static int omap2_mcspi_remove(struct platform_device *pdev)
 MODULE_ALIAS("platform:omap2_mcspi");
 
 #ifdef	CONFIG_SUSPEND
-/*
- * When SPI wake up from off-mode, CS is in activate state. If it was in
- * unactive state when driver was suspend, then force it to unactive state at
- * wake up.
- */
-static int omap2_mcspi_resume(struct device *dev)
+static int omap2_mcspi_suspend_noirq(struct device *dev)
 {
-	struct spi_master	*master = dev_get_drvdata(dev);
-	struct omap2_mcspi	*mcspi = spi_master_get_devdata(master);
-	struct omap2_mcspi_regs	*ctx = &mcspi->ctx;
-	struct omap2_mcspi_cs	*cs;
-
-	pm_runtime_get_sync(mcspi->dev);
-	list_for_each_entry(cs, &ctx->cs, node) {
-		if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) {
-			/*
-			 * We need to toggle CS state for OMAP take this
-			 * change in account.
-			 */
-			cs->chconf0 |= OMAP2_MCSPI_CHCONF_FORCE;
-			writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
-			cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
-			writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
-		}
-	}
-	pm_runtime_mark_last_busy(mcspi->dev);
-	pm_runtime_put_autosuspend(mcspi->dev);
-
-	return pinctrl_pm_select_default_state(dev);
+	return pinctrl_pm_select_sleep_state(dev);
 }
 
-static int omap2_mcspi_suspend(struct device *dev)
+static int omap2_mcspi_resume_noirq(struct device *dev)
 {
-	return pinctrl_pm_select_sleep_state(dev);
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+	int error;
+
+	error = pinctrl_pm_select_default_state(dev);
+	if (error)
+		dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
+			 __func__, error);
+
+	return 0;
 }
 
 #else
-#define omap2_mcspi_suspend	NULL
-#define	omap2_mcspi_resume	NULL
+#define omap2_mcspi_suspend_noirq	NULL
+#define omap2_mcspi_resume_noirq	NULL
 #endif
 
 static const struct dev_pm_ops omap2_mcspi_pm_ops = {
-	.resume = omap2_mcspi_resume,
-	.suspend = omap2_mcspi_suspend,
+	.suspend_noirq = omap2_mcspi_suspend_noirq,
+	.resume_noirq = omap2_mcspi_resume_noirq,
 	.runtime_resume	= omap_mcspi_runtime_resume,
 };
 
diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index 3d7f66080c57..2fa7f4b43492 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -51,19 +51,15 @@ static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data,
 		if (!pxa25x_ssp_comp(drv_data))
 			pxa2xx_spi_write(drv_data, SSTO, 0);
 
-		if (!error) {
-			msg->actual_length += drv_data->len;
-			msg->state = pxa2xx_spi_next_transfer(drv_data);
-		} else {
+		if (error) {
 			/* In case we got an error we disable the SSP now */
 			pxa2xx_spi_write(drv_data, SSCR0,
 					 pxa2xx_spi_read(drv_data, SSCR0)
 					 & ~SSCR0_SSE);
-
-			msg->state = ERROR_STATE;
+			msg->status = -EIO;
 		}
 
-		tasklet_schedule(&drv_data->pump_transfers);
+		spi_finalize_current_transfer(drv_data->master);
 	}
 }
 
@@ -74,11 +70,11 @@ static void pxa2xx_spi_dma_callback(void *data)
 
 static struct dma_async_tx_descriptor *
 pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
-			   enum dma_transfer_direction dir)
+			   enum dma_transfer_direction dir,
+			   struct spi_transfer *xfer)
 {
 	struct chip_data *chip =
 		spi_get_ctldata(drv_data->master->cur_msg->spi);
-	struct spi_transfer *xfer = drv_data->cur_transfer;
 	enum dma_slave_buswidth width;
 	struct dma_slave_config cfg;
 	struct dma_chan *chan;
@@ -144,12 +140,13 @@ irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
 	return IRQ_NONE;
 }
 
-int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
+int pxa2xx_spi_dma_prepare(struct driver_data *drv_data,
+			   struct spi_transfer *xfer)
 {
 	struct dma_async_tx_descriptor *tx_desc, *rx_desc;
 	int err;
 
-	tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV);
+	tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV, xfer);
 	if (!tx_desc) {
 		dev_err(&drv_data->pdev->dev,
 			"failed to get DMA TX descriptor\n");
@@ -157,7 +154,7 @@ int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
 		goto err_tx;
 	}
 
-	rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM);
+	rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM, xfer);
 	if (!rx_desc) {
 		dev_err(&drv_data->pdev->dev,
 			"failed to get DMA RX descriptor\n");
@@ -187,6 +184,13 @@ void pxa2xx_spi_dma_start(struct driver_data *drv_data)
 	atomic_set(&drv_data->dma_running, 1);
 }
 
+void pxa2xx_spi_dma_stop(struct driver_data *drv_data)
+{
+	atomic_set(&drv_data->dma_running, 0);
+	dmaengine_terminate_sync(drv_data->master->dma_rx);
+	dmaengine_terminate_sync(drv_data->master->dma_tx);
+}
+
 int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
 {
 	struct pxa2xx_spi_master *pdata = drv_data->master_info;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 82dcb88fcfba..0b2d60d30f69 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -340,9 +340,11 @@ static void lpss_ssp_setup(struct driver_data *drv_data)
 	}
 }
 
-static void lpss_ssp_select_cs(struct driver_data *drv_data,
+static void lpss_ssp_select_cs(struct spi_device *spi,
 			       const struct lpss_config *config)
 {
+	struct driver_data *drv_data =
+		spi_controller_get_devdata(spi->controller);
 	u32 value, cs;
 
 	if (!config->cs_sel_mask)
@@ -350,7 +352,7 @@ static void lpss_ssp_select_cs(struct driver_data *drv_data,
 
 	value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
 
-	cs = drv_data->master->cur_msg->spi->chip_select;
+	cs = spi->chip_select;
 	cs <<= config->cs_sel_shift;
 	if (cs != (value & config->cs_sel_mask)) {
 		/*
@@ -369,15 +371,17 @@ static void lpss_ssp_select_cs(struct driver_data *drv_data,
 	}
 }
 
-static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
+static void lpss_ssp_cs_control(struct spi_device *spi, bool enable)
 {
+	struct driver_data *drv_data =
+		spi_controller_get_devdata(spi->controller);
 	const struct lpss_config *config;
 	u32 value;
 
 	config = lpss_get_config(drv_data);
 
 	if (enable)
-		lpss_ssp_select_cs(drv_data, config);
+		lpss_ssp_select_cs(spi, config);
 
 	value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
 	if (enable)
@@ -387,10 +391,11 @@ static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
 	__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
 }
 
-static void cs_assert(struct driver_data *drv_data)
+static void cs_assert(struct spi_device *spi)
 {
-	struct chip_data *chip =
-		spi_get_ctldata(drv_data->master->cur_msg->spi);
+	struct chip_data *chip = spi_get_ctldata(spi);
+	struct driver_data *drv_data =
+		spi_controller_get_devdata(spi->controller);
 
 	if (drv_data->ssp_type == CE4100_SSP) {
 		pxa2xx_spi_write(drv_data, SSSR, chip->frm);
@@ -408,13 +413,14 @@ static void cs_assert(struct driver_data *drv_data)
 	}
 
 	if (is_lpss_ssp(drv_data))
-		lpss_ssp_cs_control(drv_data, true);
+		lpss_ssp_cs_control(spi, true);
 }
 
-static void cs_deassert(struct driver_data *drv_data)
+static void cs_deassert(struct spi_device *spi)
 {
-	struct chip_data *chip =
-		spi_get_ctldata(drv_data->master->cur_msg->spi);
+	struct chip_data *chip = spi_get_ctldata(spi);
+	struct driver_data *drv_data =
+		spi_controller_get_devdata(spi->controller);
 	unsigned long timeout;
 
 	if (drv_data->ssp_type == CE4100_SSP)
@@ -437,7 +443,15 @@ static void cs_deassert(struct driver_data *drv_data)
 	}
 
 	if (is_lpss_ssp(drv_data))
-		lpss_ssp_cs_control(drv_data, false);
+		lpss_ssp_cs_control(spi, false);
+}
+
+static void pxa2xx_spi_set_cs(struct spi_device *spi, bool level)
+{
+	if (level)
+		cs_deassert(spi);
+	else
+		cs_assert(spi);
 }
 
 int pxa2xx_spi_flush(struct driver_data *drv_data)
@@ -549,70 +563,6 @@ static int u32_reader(struct driver_data *drv_data)
 	return drv_data->rx == drv_data->rx_end;
 }
 
-void *pxa2xx_spi_next_transfer(struct driver_data *drv_data)
-{
-	struct spi_message *msg = drv_data->master->cur_msg;
-	struct spi_transfer *trans = drv_data->cur_transfer;
-
-	/* Move to next transfer */
-	if (trans->transfer_list.next != &msg->transfers) {
-		drv_data->cur_transfer =
-			list_entry(trans->transfer_list.next,
-					struct spi_transfer,
-					transfer_list);
-		return RUNNING_STATE;
-	} else
-		return DONE_STATE;
-}
-
-/* caller already set message->status; dma and pio irqs are blocked */
-static void giveback(struct driver_data *drv_data)
-{
-	struct spi_transfer* last_transfer;
-	struct spi_message *msg;
-
-	msg = drv_data->master->cur_msg;
-	drv_data->cur_transfer = NULL;
-
-	last_transfer = list_last_entry(&msg->transfers, struct spi_transfer,
-					transfer_list);
-
-	/* Delay if requested before any change in chip select */
-	if (last_transfer->delay_usecs)
-		udelay(last_transfer->delay_usecs);
-
-	/* Drop chip select UNLESS cs_change is true or we are returning
-	 * a message with an error, or next message is for another chip
-	 */
-	if (!last_transfer->cs_change)
-		cs_deassert(drv_data);
-	else {
-		struct spi_message *next_msg;
-
-		/* Holding of cs was hinted, but we need to make sure
-		 * the next message is for the same chip.  Don't waste
-		 * time with the following tests unless this was hinted.
-		 *
-		 * We cannot postpone this until pump_messages, because
-		 * after calling msg->complete (below) the driver that
-		 * sent the current message could be unloaded, which
-		 * could invalidate the cs_control() callback...
-		 */
-
-		/* get a pointer to the next message, if any */
-		next_msg = spi_get_next_queued_message(drv_data->master);
-
-		/* see if the next and current messages point
-		 * to the same chip
-		 */
-		if ((next_msg && next_msg->spi != msg->spi) ||
-		    msg->state == ERROR_STATE)
-			cs_deassert(drv_data);
-	}
-
-	spi_finalize_current_message(drv_data->master);
-}
-
 static void reset_sccr1(struct driver_data *drv_data)
 {
 	struct chip_data *chip =
@@ -648,8 +598,8 @@ static void int_error_stop(struct driver_data *drv_data, const char* msg)
 
 	dev_err(&drv_data->pdev->dev, "%s\n", msg);
 
-	drv_data->master->cur_msg->state = ERROR_STATE;
-	tasklet_schedule(&drv_data->pump_transfers);
+	drv_data->master->cur_msg->status = -EIO;
+	spi_finalize_current_transfer(drv_data->master);
 }
 
 static void int_transfer_complete(struct driver_data *drv_data)
@@ -660,19 +610,7 @@ static void int_transfer_complete(struct driver_data *drv_data)
 	if (!pxa25x_ssp_comp(drv_data))
 		pxa2xx_spi_write(drv_data, SSTO, 0);
 
-	/* Update total byte transferred return count actual bytes read */
-	drv_data->master->cur_msg->actual_length += drv_data->len -
-				(drv_data->rx_end - drv_data->rx);
-
-	/* Transfer delays and chip select release are
-	 * handled in pump_transfers or giveback
-	 */
-
-	/* Move to next transfer */
-	drv_data->master->cur_msg->state = pxa2xx_spi_next_transfer(drv_data);
-
-	/* Schedule transfer tasklet */
-	tasklet_schedule(&drv_data->pump_transfers);
+	spi_finalize_current_transfer(drv_data->master);
 }
 
 static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
@@ -973,17 +911,16 @@ static bool pxa2xx_spi_can_dma(struct spi_controller *master,
 	       xfer->len >= chip->dma_burst_size;
 }
 
-static void pump_transfers(unsigned long data)
+static int pxa2xx_spi_transfer_one(struct spi_controller *master,
+				   struct spi_device *spi,
+				   struct spi_transfer *transfer)
 {
-	struct driver_data *drv_data = (struct driver_data *)data;
-	struct spi_controller *master = drv_data->master;
+	struct driver_data *drv_data = spi_controller_get_devdata(master);
 	struct spi_message *message = master->cur_msg;
 	struct chip_data *chip = spi_get_ctldata(message->spi);
 	u32 dma_thresh = chip->dma_threshold;
 	u32 dma_burst = chip->dma_burst_size;
 	u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data);
-	struct spi_transfer *transfer;
-	struct spi_transfer *previous;
 	u32 clk_div;
 	u8 bits;
 	u32 speed;
@@ -992,36 +929,6 @@ static void pump_transfers(unsigned long data)
 	int err;
 	int dma_mapped;
 
-	/* Get current state information */
-	transfer = drv_data->cur_transfer;
-
-	/* Handle for abort */
-	if (message->state == ERROR_STATE) {
-		message->status = -EIO;
-		giveback(drv_data);
-		return;
-	}
-
-	/* Handle end of message */
-	if (message->state == DONE_STATE) {
-		message->status = 0;
-		giveback(drv_data);
-		return;
-	}
-
-	/* Delay if requested at end of transfer before CS change */
-	if (message->state == RUNNING_STATE) {
-		previous = list_entry(transfer->transfer_list.prev,
-					struct spi_transfer,
-					transfer_list);
-		if (previous->delay_usecs)
-			udelay(previous->delay_usecs);
-
-		/* Drop chip select only if cs_change is requested */
-		if (previous->cs_change)
-			cs_deassert(drv_data);
-	}
-
 	/* Check if we can DMA this transfer */
 	if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
 
@@ -1029,34 +936,27 @@ static void pump_transfers(unsigned long data)
 		if (message->is_dma_mapped
 				|| transfer->rx_dma || transfer->tx_dma) {
 			dev_err(&drv_data->pdev->dev,
-				"pump_transfers: mapped transfer length of "
-				"%u is greater than %d\n",
+				"Mapped transfer length of %u is greater than %d\n",
 				transfer->len, MAX_DMA_LEN);
-			message->status = -EINVAL;
-			giveback(drv_data);
-			return;
+			return -EINVAL;
 		}
 
 		/* warn ... we force this to PIO mode */
 		dev_warn_ratelimited(&message->spi->dev,
-				     "pump_transfers: DMA disabled for transfer length %ld "
-				     "greater than %d\n",
-				     (long)drv_data->len, MAX_DMA_LEN);
+				     "DMA disabled for transfer length %ld greater than %d\n",
+				     (long)transfer->len, MAX_DMA_LEN);
 	}
 
 	/* Setup the transfer state based on the type of transfer */
 	if (pxa2xx_spi_flush(drv_data) == 0) {
-		dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
-		message->status = -EIO;
-		giveback(drv_data);
-		return;
+		dev_err(&drv_data->pdev->dev, "Flush failed\n");
+		return -EIO;
 	}
 	drv_data->n_bytes = chip->n_bytes;
 	drv_data->tx = (void *)transfer->tx_buf;
 	drv_data->tx_end = drv_data->tx + transfer->len;
 	drv_data->rx = transfer->rx_buf;
 	drv_data->rx_end = drv_data->rx + transfer->len;
-	drv_data->len = transfer->len;
 	drv_data->write = drv_data->tx ? chip->write : null_writer;
 	drv_data->read = drv_data->rx ? chip->read : null_reader;
 
@@ -1095,11 +995,9 @@ static void pump_transfers(unsigned long data)
 						bits, &dma_burst,
 						&dma_thresh))
 			dev_warn_ratelimited(&message->spi->dev,
-					     "pump_transfers: DMA burst size reduced to match bits_per_word\n");
+					     "DMA burst size reduced to match bits_per_word\n");
 	}
 
-	message->state = RUNNING_STATE;
-
 	dma_mapped = master->can_dma &&
 		     master->can_dma(master, message->spi, transfer) &&
 		     master->cur_msg_mapped;
@@ -1108,12 +1006,9 @@ static void pump_transfers(unsigned long data)
 		/* Ensure we have the correct interrupt handler */
 		drv_data->transfer_handler = pxa2xx_spi_dma_transfer;
 
-		err = pxa2xx_spi_dma_prepare(drv_data, dma_burst);
-		if (err) {
-			message->status = err;
-			giveback(drv_data);
-			return;
-		}
+		err = pxa2xx_spi_dma_prepare(drv_data, transfer);
+		if (err)
+			return err;
 
 		/* Clear status and start DMA engine */
 		cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
@@ -1175,27 +1070,40 @@ static void pump_transfers(unsigned long data)
 			pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
 	}
 
-	cs_assert(drv_data);
-
-	/* after chip select, release the data by enabling service
-	 * requests and interrupts, without changing any mode bits */
+	/*
+	 * Release the data by enabling service requests and interrupts,
+	 * without changing any mode bits
+	 */
 	pxa2xx_spi_write(drv_data, SSCR1, cr1);
+
+	return 1;
 }
 
-static int pxa2xx_spi_transfer_one_message(struct spi_controller *master,
-					   struct spi_message *msg)
+static void pxa2xx_spi_handle_err(struct spi_controller *master,
+				 struct spi_message *msg)
 {
 	struct driver_data *drv_data = spi_controller_get_devdata(master);
 
-	/* Initial message state*/
-	msg->state = START_STATE;
-	drv_data->cur_transfer = list_entry(msg->transfers.next,
-						struct spi_transfer,
-						transfer_list);
+	/* Disable the SSP */
+	pxa2xx_spi_write(drv_data, SSCR0,
+			 pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+	/* Clear and disable interrupts and service requests */
+	write_SSSR_CS(drv_data, drv_data->clear_sr);
+	pxa2xx_spi_write(drv_data, SSCR1,
+			 pxa2xx_spi_read(drv_data, SSCR1)
+			 & ~(drv_data->int_cr1 | drv_data->dma_cr1));
+	if (!pxa25x_ssp_comp(drv_data))
+		pxa2xx_spi_write(drv_data, SSTO, 0);
 
-	/* Mark as busy and launch transfers */
-	tasklet_schedule(&drv_data->pump_transfers);
-	return 0;
+	/*
+	 * Stop the DMA if running. Note DMA callback handler may have unset
+	 * the dma_running already, which is fine as stopping is not needed
+	 * then but we shouldn't rely this flag for anything else than
+	 * stopping. For instance to differentiate between PIO and DMA
+	 * transfers.
+	 */
+	if (atomic_read(&drv_data->dma_running))
+		pxa2xx_spi_dma_stop(drv_data);
 }
 
 static int pxa2xx_spi_unprepare_transfer(struct spi_controller *master)
@@ -1651,7 +1559,9 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	master->dma_alignment = DMA_ALIGNMENT;
 	master->cleanup = cleanup;
 	master->setup = setup;
-	master->transfer_one_message = pxa2xx_spi_transfer_one_message;
+	master->set_cs = pxa2xx_spi_set_cs;
+	master->transfer_one = pxa2xx_spi_transfer_one;
+	master->handle_err = pxa2xx_spi_handle_err;
 	master->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer;
 	master->fw_translate_cs = pxa2xx_spi_fw_translate_cs;
 	master->auto_runtime_pm = true;
@@ -1702,7 +1612,9 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	}
 
 	/* Enable SOC clock */
-	clk_prepare_enable(ssp->clk);
+	status = clk_prepare_enable(ssp->clk);
+	if (status)
+		goto out_error_dma_irq_alloc;
 
 	master->max_speed_hz = clk_get_rate(ssp->clk);
 
@@ -1787,9 +1699,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 		}
 	}
 
-	tasklet_init(&drv_data->pump_transfers, pump_transfers,
-		     (unsigned long)drv_data);
-
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
@@ -1809,6 +1718,8 @@ out_error_clock_enabled:
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	clk_disable_unprepare(ssp->clk);
+
+out_error_dma_irq_alloc:
 	pxa2xx_spi_dma_release(drv_data);
 	free_irq(ssp->irq, drv_data);
 
@@ -1882,8 +1793,11 @@ static int pxa2xx_spi_resume(struct device *dev)
 	int status;
 
 	/* Enable the SSP clock */
-	if (!pm_runtime_suspended(dev))
-		clk_prepare_enable(ssp->clk);
+	if (!pm_runtime_suspended(dev)) {
+		status = clk_prepare_enable(ssp->clk);
+		if (status)
+			return status;
+	}
 
 	/* Restore LPSS private register bits */
 	if (is_lpss_ssp(drv_data))
@@ -1912,9 +1826,10 @@ static int pxa2xx_spi_runtime_suspend(struct device *dev)
 static int pxa2xx_spi_runtime_resume(struct device *dev)
 {
 	struct driver_data *drv_data = dev_get_drvdata(dev);
+	int status;
 
-	clk_prepare_enable(drv_data->ssp->clk);
-	return 0;
+	status = clk_prepare_enable(drv_data->ssp->clk);
+	return status;
 }
 #endif
 
diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h
index 0ae7defd3492..513c53aaeab2 100644
--- a/drivers/spi/spi-pxa2xx.h
+++ b/drivers/spi/spi-pxa2xx.h
@@ -46,15 +46,10 @@ struct driver_data {
 	u32 clear_sr;
 	u32 mask_sr;
 
-	/* Message Transfer pump */
-	struct tasklet_struct pump_transfers;
-
 	/* DMA engine support */
 	atomic_t dma_running;
 
-	/* Current message transfer state info */
-	struct spi_transfer *cur_transfer;
-	size_t len;
+	/* Current transfer state info */
 	void *tx;
 	void *tx_end;
 	void *rx;
@@ -104,11 +99,6 @@ static  inline void pxa2xx_spi_write(const struct driver_data *drv_data,
 	__raw_writel(val, drv_data->ioaddr + reg);
 }
 
-#define START_STATE ((void *)0)
-#define RUNNING_STATE ((void *)1)
-#define DONE_STATE ((void *)2)
-#define ERROR_STATE ((void *)-1)
-
 #define DMA_ALIGNMENT		8
 
 static inline int pxa25x_ssp_comp(struct driver_data *drv_data)
@@ -133,14 +123,15 @@ static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val)
 }
 
 extern int pxa2xx_spi_flush(struct driver_data *drv_data);
-extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data);
 
 #define MAX_DMA_LEN		SZ_64K
 #define DEFAULT_DMA_CR1		(SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL)
 
 extern irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data);
-extern int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst);
+extern int pxa2xx_spi_dma_prepare(struct driver_data *drv_data,
+				  struct spi_transfer *xfer);
 extern void pxa2xx_spi_dma_start(struct driver_data *drv_data);
+extern void pxa2xx_spi_dma_stop(struct driver_data *drv_data);
 extern int pxa2xx_spi_dma_setup(struct driver_data *drv_data);
 extern void pxa2xx_spi_dma_release(struct driver_data *drv_data);
 extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index baa3a9fa2638..7b7151ec14c8 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -28,15 +28,15 @@
 
 #define S3C64XX_SPI_CH_CFG		0x00
 #define S3C64XX_SPI_CLK_CFG		0x04
-#define S3C64XX_SPI_MODE_CFG	0x08
-#define S3C64XX_SPI_SLAVE_SEL	0x0C
+#define S3C64XX_SPI_MODE_CFG		0x08
+#define S3C64XX_SPI_SLAVE_SEL		0x0C
 #define S3C64XX_SPI_INT_EN		0x10
 #define S3C64XX_SPI_STATUS		0x14
 #define S3C64XX_SPI_TX_DATA		0x18
 #define S3C64XX_SPI_RX_DATA		0x1C
-#define S3C64XX_SPI_PACKET_CNT	0x20
-#define S3C64XX_SPI_PENDING_CLR	0x24
-#define S3C64XX_SPI_SWAP_CFG	0x28
+#define S3C64XX_SPI_PACKET_CNT		0x20
+#define S3C64XX_SPI_PENDING_CLR		0x24
+#define S3C64XX_SPI_SWAP_CFG		0x28
 #define S3C64XX_SPI_FB_CLK		0x2C
 
 #define S3C64XX_SPI_CH_HS_EN		(1<<6)	/* High Speed Enable */
@@ -77,9 +77,9 @@
 #define S3C64XX_SPI_INT_TX_FIFORDY_EN		(1<<0)
 
 #define S3C64XX_SPI_ST_RX_OVERRUN_ERR		(1<<5)
-#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR	(1<<4)
+#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR		(1<<4)
 #define S3C64XX_SPI_ST_TX_OVERRUN_ERR		(1<<3)
-#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR	(1<<2)
+#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR		(1<<2)
 #define S3C64XX_SPI_ST_RX_FIFORDY		(1<<1)
 #define S3C64XX_SPI_ST_TX_FIFORDY		(1<<0)
 
@@ -100,7 +100,7 @@
 #define S3C64XX_SPI_SWAP_TX_BIT			(1<<1)
 #define S3C64XX_SPI_SWAP_TX_EN			(1<<0)
 
-#define S3C64XX_SPI_FBCLK_MSK		(3<<0)
+#define S3C64XX_SPI_FBCLK_MSK			(3<<0)
 
 #define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id])
 #define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \
@@ -156,7 +156,6 @@ struct s3c64xx_spi_port_config {
  * @ioclk: Pointer to the i/o clock between master and slave
  * @master: Pointer to the SPI Protocol master.
  * @cntrlr_info: Platform specific data for the controller this driver manages.
- * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint.
  * @lock: Controller specific lock.
  * @state: Set of FLAGS to indicate status.
  * @rx_dmach: Controller's DMA channel for Rx.
@@ -177,7 +176,6 @@ struct s3c64xx_spi_driver_data {
 	struct platform_device          *pdev;
 	struct spi_master               *master;
 	struct s3c64xx_spi_info  *cntrlr_info;
-	struct spi_device               *tgl_spi;
 	spinlock_t                      lock;
 	unsigned long                   sfr_start;
 	struct completion               xfer_completion;
@@ -190,7 +188,7 @@ struct s3c64xx_spi_driver_data {
 	unsigned int			port_id;
 };
 
-static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
+static void s3c64xx_flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 {
 	void __iomem *regs = sdd->regs;
 	unsigned long loops;
@@ -350,9 +348,8 @@ static bool s3c64xx_spi_can_dma(struct spi_master *master,
 	return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1;
 }
 
-static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
-				struct spi_device *spi,
-				struct spi_transfer *xfer, int dma_mode)
+static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
+				    struct spi_transfer *xfer, int dma_mode)
 {
 	void __iomem *regs = sdd->regs;
 	u32 modecfg, chcfg;
@@ -442,8 +439,8 @@ static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
 	return RX_FIFO_LVL(status, sdd);
 }
 
-static int wait_for_dma(struct s3c64xx_spi_driver_data *sdd,
-			struct spi_transfer *xfer)
+static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd,
+				struct spi_transfer *xfer)
 {
 	void __iomem *regs = sdd->regs;
 	unsigned long val;
@@ -485,8 +482,8 @@ static int wait_for_dma(struct s3c64xx_spi_driver_data *sdd,
 	return 0;
 }
 
-static int wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
-			struct spi_transfer *xfer)
+static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
+				struct spi_transfer *xfer)
 {
 	void __iomem *regs = sdd->regs;
 	unsigned long val;
@@ -505,6 +502,8 @@ static int wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
 		status = readl(regs + S3C64XX_SPI_STATUS);
 	} while (RX_FIFO_LVL(status, sdd) < xfer->len && --val);
 
+	if (!val)
+		return -EIO;
 
 	/* If it was only Tx */
 	if (!xfer->rx_buf) {
@@ -635,11 +634,15 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
 				    struct spi_transfer *xfer)
 {
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
+	const unsigned int fifo_len = (FIFO_LVL_MASK(sdd) >> 1) + 1;
+	const void *tx_buf = NULL;
+	void *rx_buf = NULL;
+	int target_len = 0, origin_len = 0;
+	int use_dma = 0;
 	int status;
 	u32 speed;
 	u8 bpw;
 	unsigned long flags;
-	int use_dma;
 
 	reinit_completion(&sdd->xfer_completion);
 
@@ -654,48 +657,77 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
 		s3c64xx_spi_config(sdd);
 	}
 
-	/* Polling method for xfers not bigger than FIFO capacity */
-	use_dma = 0;
-	if (!is_polling(sdd) &&
-	    (sdd->rx_dma.ch && sdd->tx_dma.ch &&
-	     (xfer->len > ((FIFO_LVL_MASK(sdd) >> 1) + 1))))
+	if (!is_polling(sdd) && (xfer->len > fifo_len) &&
+	    sdd->rx_dma.ch && sdd->tx_dma.ch) {
 		use_dma = 1;
 
-	spin_lock_irqsave(&sdd->lock, flags);
+	} else if (is_polling(sdd) && xfer->len > fifo_len) {
+		tx_buf = xfer->tx_buf;
+		rx_buf = xfer->rx_buf;
+		origin_len = xfer->len;
 
-	/* Pending only which is to be done */
-	sdd->state &= ~RXBUSY;
-	sdd->state &= ~TXBUSY;
+		target_len = xfer->len;
+		if (xfer->len > fifo_len)
+			xfer->len = fifo_len;
+	}
 
-	enable_datapath(sdd, spi, xfer, use_dma);
+	do {
+		spin_lock_irqsave(&sdd->lock, flags);
 
-	/* Start the signals */
-	s3c64xx_spi_set_cs(spi, true);
+		/* Pending only which is to be done */
+		sdd->state &= ~RXBUSY;
+		sdd->state &= ~TXBUSY;
 
-	spin_unlock_irqrestore(&sdd->lock, flags);
+		s3c64xx_enable_datapath(sdd, xfer, use_dma);
 
-	if (use_dma)
-		status = wait_for_dma(sdd, xfer);
-	else
-		status = wait_for_pio(sdd, xfer);
-
-	if (status) {
-		dev_err(&spi->dev, "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
-			xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
-			(sdd->state & RXBUSY) ? 'f' : 'p',
-			(sdd->state & TXBUSY) ? 'f' : 'p',
-			xfer->len);
-
-		if (use_dma) {
-			if (xfer->tx_buf != NULL
-			    && (sdd->state & TXBUSY))
-				dmaengine_terminate_all(sdd->tx_dma.ch);
-			if (xfer->rx_buf != NULL
-			    && (sdd->state & RXBUSY))
-				dmaengine_terminate_all(sdd->rx_dma.ch);
+		/* Start the signals */
+		s3c64xx_spi_set_cs(spi, true);
+
+		spin_unlock_irqrestore(&sdd->lock, flags);
+
+		if (use_dma)
+			status = s3c64xx_wait_for_dma(sdd, xfer);
+		else
+			status = s3c64xx_wait_for_pio(sdd, xfer);
+
+		if (status) {
+			dev_err(&spi->dev,
+				"I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
+				xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
+				(sdd->state & RXBUSY) ? 'f' : 'p',
+				(sdd->state & TXBUSY) ? 'f' : 'p',
+				xfer->len);
+
+			if (use_dma) {
+				if (xfer->tx_buf && (sdd->state & TXBUSY))
+					dmaengine_terminate_all(sdd->tx_dma.ch);
+				if (xfer->rx_buf && (sdd->state & RXBUSY))
+					dmaengine_terminate_all(sdd->rx_dma.ch);
+			}
+		} else {
+			s3c64xx_flush_fifo(sdd);
 		}
-	} else {
-		flush_fifo(sdd);
+		if (target_len > 0) {
+			target_len -= xfer->len;
+
+			if (xfer->tx_buf)
+				xfer->tx_buf += xfer->len;
+
+			if (xfer->rx_buf)
+				xfer->rx_buf += xfer->len;
+
+			if (target_len > fifo_len)
+				xfer->len = fifo_len;
+			else
+				xfer->len = target_len;
+		}
+	} while (target_len > 0);
+
+	if (origin_len) {
+		/* Restore original xfer buffers and length */
+		xfer->tx_buf = tx_buf;
+		xfer->rx_buf = rx_buf;
+		xfer->len = origin_len;
 	}
 
 	return status;
@@ -891,7 +923,7 @@ static irqreturn_t s3c64xx_spi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
+static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd)
 {
 	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
@@ -929,7 +961,7 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
 	val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF);
 	writel(val, regs + S3C64XX_SPI_MODE_CFG);
 
-	flush_fifo(sdd);
+	s3c64xx_flush_fifo(sdd);
 }
 
 #ifdef CONFIG_OF
@@ -1145,7 +1177,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	/* Setup Deufult Mode */
-	s3c64xx_spi_hwinit(sdd, sdd->port_id);
+	s3c64xx_spi_hwinit(sdd);
 
 	spin_lock_init(&sdd->lock);
 	init_completion(&sdd->xfer_completion);
@@ -1260,8 +1292,6 @@ static int s3c64xx_spi_resume(struct device *dev)
 	if (ret < 0)
 		return ret;
 
-	s3c64xx_spi_hwinit(sdd, sdd->port_id);
-
 	return spi_master_resume(master);
 }
 #endif /* CONFIG_PM_SLEEP */
@@ -1299,6 +1329,8 @@ static int s3c64xx_spi_runtime_resume(struct device *dev)
 	if (ret != 0)
 		goto err_disable_src_clk;
 
+	s3c64xx_spi_hwinit(sdd);
+
 	return 0;
 
 err_disable_src_clk:
@@ -1344,15 +1376,6 @@ static struct s3c64xx_spi_port_config exynos4_spi_port_config = {
 	.clk_from_cmu	= true,
 };
 
-static struct s3c64xx_spi_port_config exynos5440_spi_port_config = {
-	.fifo_lvl_mask	= { 0x1ff },
-	.rx_lvl_offset	= 15,
-	.tx_st_done	= 25,
-	.high_speed	= true,
-	.clk_from_cmu	= true,
-	.quirks		= S3C64XX_SPI_QUIRK_POLL,
-};
-
 static struct s3c64xx_spi_port_config exynos7_spi_port_config = {
 	.fifo_lvl_mask	= { 0x1ff, 0x7F, 0x7F, 0x7F, 0x7F, 0x1ff},
 	.rx_lvl_offset	= 15,
@@ -1396,9 +1419,6 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = {
 	{ .compatible = "samsung,exynos4210-spi",
 			.data = (void *)&exynos4_spi_port_config,
 	},
-	{ .compatible = "samsung,exynos5440-spi",
-			.data = (void *)&exynos5440_spi_port_config,
-	},
 	{ .compatible = "samsung,exynos7-spi",
 			.data = (void *)&exynos7_spi_port_config,
 	},
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 8171eedbfc90..0e74cbf9929d 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -39,7 +39,7 @@ struct sh_msiof_chipdata {
 	u16 tx_fifo_size;
 	u16 rx_fifo_size;
 	u16 master_flags;
-	u16 min_div;
+	u16 min_div_pow;
 };
 
 struct sh_msiof_spi_priv {
@@ -51,7 +51,7 @@ struct sh_msiof_spi_priv {
 	struct completion done;
 	unsigned int tx_fifo_size;
 	unsigned int rx_fifo_size;
-	unsigned int min_div;
+	unsigned int min_div_pow;
 	void *tx_dma_page;
 	void *rx_dma_page;
 	dma_addr_t tx_dma_addr;
@@ -249,43 +249,46 @@ static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static struct {
-	unsigned short div;
-	unsigned short brdv;
-} const sh_msiof_spi_div_table[] = {
-	{ 1,	SCR_BRDV_DIV_1 },
-	{ 2,	SCR_BRDV_DIV_2 },
-	{ 4,	SCR_BRDV_DIV_4 },
-	{ 8,	SCR_BRDV_DIV_8 },
-	{ 16,	SCR_BRDV_DIV_16 },
-	{ 32,	SCR_BRDV_DIV_32 },
+static const u32 sh_msiof_spi_div_array[] = {
+	SCR_BRDV_DIV_1, SCR_BRDV_DIV_2,	 SCR_BRDV_DIV_4,
+	SCR_BRDV_DIV_8,	SCR_BRDV_DIV_16, SCR_BRDV_DIV_32,
 };
 
 static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p,
 				      unsigned long parent_rate, u32 spi_hz)
 {
-	unsigned long div = 1024;
+	unsigned long div;
 	u32 brps, scr;
-	size_t k;
+	unsigned int div_pow = p->min_div_pow;
 
-	if (!WARN_ON(!spi_hz || !parent_rate))
-		div = DIV_ROUND_UP(parent_rate, spi_hz);
-
-	div = max_t(unsigned long, div, p->min_div);
+	if (!spi_hz || !parent_rate) {
+		WARN(1, "Invalid clock rate parameters %lu and %u\n",
+		     parent_rate, spi_hz);
+		return;
+	}
 
-	for (k = 0; k < ARRAY_SIZE(sh_msiof_spi_div_table); k++) {
-		brps = DIV_ROUND_UP(div, sh_msiof_spi_div_table[k].div);
+	div = DIV_ROUND_UP(parent_rate, spi_hz);
+	if (div <= 1024) {
 		/* SCR_BRDV_DIV_1 is valid only if BRPS is x 1/1 or x 1/2 */
-		if (sh_msiof_spi_div_table[k].div == 1 && brps > 2)
-			continue;
-		if (brps <= 32) /* max of brdv is 32 */
-			break;
-	}
+		if (!div_pow && div <= 32 && div > 2)
+			div_pow = 1;
+
+		if (div_pow)
+			brps = (div + 1) >> div_pow;
+		else
+			brps = div;
 
-	k = min_t(int, k, ARRAY_SIZE(sh_msiof_spi_div_table) - 1);
-	brps = min_t(int, brps, 32);
+		for (; brps > 32; div_pow++)
+			brps = (brps + 1) >> 1;
+	} else {
+		/* Set transfer rate composite divisor to 2^5 * 32 = 1024 */
+		dev_err(&p->pdev->dev,
+			"Requested SPI transfer rate %d is too low\n", spi_hz);
+		div_pow = 5;
+		brps = 32;
+	}
 
-	scr = sh_msiof_spi_div_table[k].brdv | SCR_BRPS(brps);
+	scr = sh_msiof_spi_div_array[div_pow] | SCR_BRPS(brps);
 	sh_msiof_write(p, TSCR, scr);
 	if (!(p->master->flags & SPI_MASTER_MUST_TX))
 		sh_msiof_write(p, RSCR, scr);
@@ -564,14 +567,16 @@ static int sh_msiof_spi_setup(struct spi_device *spi)
 
 	/* Configure native chip select mode/polarity early */
 	clr = MDR1_SYNCMD_MASK;
-	set = MDR1_TRMD | TMDR1_PCON | MDR1_SYNCMD_SPI;
+	set = MDR1_SYNCMD_SPI;
 	if (spi->mode & SPI_CS_HIGH)
 		clr |= BIT(MDR1_SYNCAC_SHIFT);
 	else
 		set |= BIT(MDR1_SYNCAC_SHIFT);
 	pm_runtime_get_sync(&p->pdev->dev);
 	tmp = sh_msiof_read(p, TMDR1) & ~clr;
-	sh_msiof_write(p, TMDR1, tmp | set);
+	sh_msiof_write(p, TMDR1, tmp | set | MDR1_TRMD | TMDR1_PCON);
+	tmp = sh_msiof_read(p, RMDR1) & ~clr;
+	sh_msiof_write(p, RMDR1, tmp | set);
 	pm_runtime_put(&p->pdev->dev);
 	p->native_cs_high = spi->mode & SPI_CS_HIGH;
 	p->native_cs_inited = true;
@@ -1041,21 +1046,21 @@ static const struct sh_msiof_chipdata sh_data = {
 	.tx_fifo_size = 64,
 	.rx_fifo_size = 64,
 	.master_flags = 0,
-	.min_div = 1,
+	.min_div_pow = 0,
 };
 
 static const struct sh_msiof_chipdata rcar_gen2_data = {
 	.tx_fifo_size = 64,
 	.rx_fifo_size = 64,
 	.master_flags = SPI_MASTER_MUST_TX,
-	.min_div = 1,
+	.min_div_pow = 0,
 };
 
 static const struct sh_msiof_chipdata rcar_gen3_data = {
 	.tx_fifo_size = 64,
 	.rx_fifo_size = 64,
 	.master_flags = SPI_MASTER_MUST_TX,
-	.min_div = 2,
+	.min_div_pow = 1,
 };
 
 static const struct of_device_id sh_msiof_match[] = {
@@ -1319,7 +1324,7 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, p);
 	p->master = master;
 	p->info = info;
-	p->min_div = chipdata->min_div;
+	p->min_div_pow = chipdata->min_div_pow;
 
 	init_completion(&p->done);
 
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index ba9743fa2326..ad1e55d3d5d5 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1129,7 +1129,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 	if (!spi->clk_rate) {
 		dev_err(&pdev->dev, "clk rate = 0\n");
 		ret = -EINVAL;
-		goto err_master_put;
+		goto err_clk_disable;
 	}
 
 	spi->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index c24d9b45a27c..5f19016bbf10 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -36,6 +36,7 @@
 #include <linux/sizes.h>
 
 #include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
 
 struct ti_qspi_regs {
 	u32 clkctrl;
@@ -50,6 +51,7 @@ struct ti_qspi {
 	struct spi_master	*master;
 	void __iomem            *base;
 	void __iomem            *mmap_base;
+	size_t			mmap_size;
 	struct regmap		*ctrl_base;
 	unsigned int		ctrl_reg;
 	struct clk		*fclk;
@@ -434,12 +436,10 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst,
 	return 0;
 }
 
-static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi,
-				     struct spi_flash_read_message *msg)
+static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi, loff_t offs,
+				     void *to, size_t readsize)
 {
-	size_t readsize = msg->len;
-	void *to = msg->buf;
-	dma_addr_t dma_src = qspi->mmap_phys_base + msg->from;
+	dma_addr_t dma_src = qspi->mmap_phys_base + offs;
 	int ret = 0;
 
 	/*
@@ -507,13 +507,14 @@ static void ti_qspi_disable_memory_map(struct spi_device *spi)
 	qspi->mmap_enabled = false;
 }
 
-static void ti_qspi_setup_mmap_read(struct spi_device *spi,
-				    struct spi_flash_read_message *msg)
+static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
+				    u8 data_nbits, u8 addr_width,
+				    u8 dummy_bytes)
 {
 	struct ti_qspi  *qspi = spi_master_get_devdata(spi->master);
-	u32 memval = msg->read_opcode;
+	u32 memval = opcode;
 
-	switch (msg->data_nbits) {
+	switch (data_nbits) {
 	case SPI_NBITS_QUAD:
 		memval |= QSPI_SETUP_RD_QUAD;
 		break;
@@ -524,48 +525,64 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi,
 		memval |= QSPI_SETUP_RD_NORMAL;
 		break;
 	}
-	memval |= ((msg->addr_width - 1) << QSPI_SETUP_ADDR_SHIFT |
-		   msg->dummy_bytes << QSPI_SETUP_DUMMY_SHIFT);
+	memval |= ((addr_width - 1) << QSPI_SETUP_ADDR_SHIFT |
+		   dummy_bytes << QSPI_SETUP_DUMMY_SHIFT);
 	ti_qspi_write(qspi, memval,
 		      QSPI_SPI_SETUP_REG(spi->chip_select));
 }
 
-static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi,
-				      struct spi_flash_read_message *msg)
+static int ti_qspi_exec_mem_op(struct spi_mem *mem,
+			       const struct spi_mem_op *op)
 {
-	return virt_addr_valid(msg->buf);
-}
-
-static int ti_qspi_spi_flash_read(struct spi_device *spi,
-				  struct spi_flash_read_message *msg)
-{
-	struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
+	struct ti_qspi *qspi = spi_master_get_devdata(mem->spi->master);
+	u32 from = 0;
 	int ret = 0;
 
+	/* Only optimize read path. */
+	if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN ||
+	    !op->addr.nbytes || op->addr.nbytes > 4)
+		return -ENOTSUPP;
+
+	/* Address exceeds MMIO window size, fall back to regular mode. */
+	from = op->addr.val;
+	if (from + op->data.nbytes > qspi->mmap_size)
+		return -ENOTSUPP;
+
 	mutex_lock(&qspi->list_lock);
 
 	if (!qspi->mmap_enabled)
-		ti_qspi_enable_memory_map(spi);
-	ti_qspi_setup_mmap_read(spi, msg);
+		ti_qspi_enable_memory_map(mem->spi);
+	ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
+				op->addr.nbytes, op->dummy.nbytes);
 
 	if (qspi->rx_chan) {
-		if (msg->cur_msg_mapped)
-			ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from);
-		else
-			ret = ti_qspi_dma_bounce_buffer(qspi, msg);
-		if (ret)
-			goto err_unlock;
+		struct sg_table sgt;
+
+		if (virt_addr_valid(op->data.buf.in) &&
+		    !spi_controller_dma_map_mem_op_data(mem->spi->master, op,
+							&sgt)) {
+			ret = ti_qspi_dma_xfer_sg(qspi, sgt, from);
+			spi_controller_dma_unmap_mem_op_data(mem->spi->master,
+							     op, &sgt);
+		} else {
+			ret = ti_qspi_dma_bounce_buffer(qspi, from,
+							op->data.buf.in,
+							op->data.nbytes);
+		}
 	} else {
-		memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len);
+		memcpy_fromio(op->data.buf.in, qspi->mmap_base + from,
+			      op->data.nbytes);
 	}
-	msg->retlen = msg->len;
 
-err_unlock:
 	mutex_unlock(&qspi->list_lock);
 
 	return ret;
 }
 
+static const struct spi_controller_mem_ops ti_qspi_mem_ops = {
+	.exec_op = ti_qspi_exec_mem_op,
+};
+
 static int ti_qspi_start_transfer_one(struct spi_master *master,
 		struct spi_message *m)
 {
@@ -672,7 +689,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
 	master->dev.of_node = pdev->dev.of_node;
 	master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
 				     SPI_BPW_MASK(8);
-	master->spi_flash_read = ti_qspi_spi_flash_read;
+	master->mem_ops = &ti_qspi_mem_ops;
 
 	if (!of_property_read_u32(np, "num-cs", &num_cs))
 		master->num_chipselect = num_cs;
@@ -702,6 +719,9 @@ static int ti_qspi_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (res_mmap)
+		qspi->mmap_size = resource_size(res_mmap);
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq resource?\n");
@@ -770,7 +790,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
 		dma_release_channel(qspi->rx_chan);
 		goto no_dma;
 	}
-	master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma;
 	master->dma_rx = qspi->rx_chan;
 	init_completion(&qspi->transfer_complete);
 	if (res_mmap)
@@ -784,7 +803,7 @@ no_dma:
 				 "mmap failed with error %ld using PIO mode\n",
 				 PTR_ERR(qspi->mmap_base));
 			qspi->mmap_base = NULL;
-			master->spi_flash_read = NULL;
+			master->mem_ops = NULL;
 		}
 	}
 	qspi->mmap_enabled = false;
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 18aeaceee286..cc4d31033494 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -20,6 +20,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/spi/spi.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -135,6 +136,7 @@
 #define GQSPI_DMA_UNALIGN		0x3
 #define GQSPI_DEFAULT_NUM_CS	1	/* Default number of chip selects */
 
+#define SPI_AUTOSUSPEND_TIMEOUT		3000
 enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
 
 /**
@@ -356,21 +358,9 @@ static void zynqmp_qspi_copy_read_data(struct zynqmp_qspi *xqspi,
 static int zynqmp_prepare_transfer_hardware(struct spi_master *master)
 {
 	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
-	int ret;
-
-	ret = clk_enable(xqspi->refclk);
-	if (ret)
-		return ret;
-
-	ret = clk_enable(xqspi->pclk);
-	if (ret)
-		goto clk_err;
 
 	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
 	return 0;
-clk_err:
-	clk_disable(xqspi->refclk);
-	return ret;
 }
 
 /**
@@ -387,8 +377,6 @@ static int zynqmp_unprepare_transfer_hardware(struct spi_master *master)
 	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
 
 	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
-	clk_disable(xqspi->refclk);
-	clk_disable(xqspi->pclk);
 	return 0;
 }
 
@@ -918,8 +906,7 @@ static int zynqmp_qspi_start_transfer(struct spi_master *master,
  */
 static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct spi_master *master = platform_get_drvdata(pdev);
+	struct spi_master *master = dev_get_drvdata(dev);
 
 	spi_master_suspend(master);
 
@@ -939,8 +926,7 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
  */
 static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct spi_master *master = platform_get_drvdata(pdev);
+	struct spi_master *master = dev_get_drvdata(dev);
 	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
 	int ret = 0;
 
@@ -959,11 +945,67 @@ static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
 
 	spi_master_resume(master);
 
+	clk_disable(xqspi->refclk);
+	clk_disable(xqspi->pclk);
 	return 0;
 }
 
-static SIMPLE_DEV_PM_OPS(zynqmp_qspi_dev_pm_ops, zynqmp_qspi_suspend,
-			 zynqmp_qspi_resume);
+/**
+ * zynqmp_runtime_suspend - Runtime suspend method for the SPI driver
+ * @dev:	Address of the platform_device structure
+ *
+ * This function disables the clocks
+ *
+ * Return:	Always 0
+ */
+static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+
+	clk_disable(xqspi->refclk);
+	clk_disable(xqspi->pclk);
+
+	return 0;
+}
+
+/**
+ * zynqmp_runtime_resume - Runtime resume method for the SPI driver
+ * @dev:	Address of the platform_device structure
+ *
+ * This function enables the clocks
+ *
+ * Return:	0 on success and error value on error
+ */
+static int __maybe_unused zynqmp_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+	int ret;
+
+	ret = clk_enable(xqspi->pclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable APB clock.\n");
+		return ret;
+	}
+
+	ret = clk_enable(xqspi->refclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable device clock.\n");
+		clk_disable(xqspi->pclk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops zynqmp_qspi_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(zynqmp_runtime_suspend,
+			   zynqmp_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(zynqmp_qspi_suspend, zynqmp_qspi_resume)
+};
 
 /**
  * zynqmp_qspi_probe:	Probe method for the QSPI driver
@@ -1023,9 +1065,15 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
 		goto clk_dis_pclk;
 	}
 
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
 	/* QSPI controller initializations */
 	zynqmp_qspi_init_hw(xqspi);
 
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
 	xqspi->irq = platform_get_irq(pdev, 0);
 	if (xqspi->irq <= 0) {
 		ret = -ENXIO;
@@ -1063,6 +1111,8 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
 	return 0;
 
 clk_dis_all:
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	clk_disable_unprepare(xqspi->refclk);
 clk_dis_pclk:
 	clk_disable_unprepare(xqspi->pclk);
@@ -1090,6 +1140,8 @@ static int zynqmp_qspi_remove(struct platform_device *pdev)
 	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
 	clk_disable_unprepare(xqspi->refclk);
 	clk_disable_unprepare(xqspi->pclk);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
 	spi_unregister_master(master);
 
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 7b213faa0a2b..20b5b2754830 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
 #include <linux/of_gpio.h>
 #include <linux/pm_runtime.h>
 #include <linux/pm_domain.h>
@@ -46,6 +47,8 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/spi.h>
 
+#include "internals.h"
+
 static DEFINE_IDR(spi_master_idr);
 
 static void spidev_release(struct device *dev)
@@ -740,9 +743,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable)
 }
 
 #ifdef CONFIG_HAS_DMA
-static int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
-		       struct sg_table *sgt, void *buf, size_t len,
-		       enum dma_data_direction dir)
+int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
+		struct sg_table *sgt, void *buf, size_t len,
+		enum dma_data_direction dir)
 {
 	const bool vmalloced_buf = is_vmalloc_addr(buf);
 	unsigned int max_seg_size = dma_get_max_seg_size(dev);
@@ -821,8 +824,8 @@ static int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
 	return 0;
 }
 
-static void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev,
-			  struct sg_table *sgt, enum dma_data_direction dir)
+void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev,
+		   struct sg_table *sgt, enum dma_data_direction dir)
 {
 	if (sgt->orig_nents) {
 		dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir);
@@ -907,19 +910,6 @@ static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg)
 	return 0;
 }
 #else /* !CONFIG_HAS_DMA */
-static inline int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
-			      struct sg_table *sgt, void *buf, size_t len,
-			      enum dma_data_direction dir)
-{
-	return -EINVAL;
-}
-
-static inline void spi_unmap_buf(struct spi_controller *ctlr,
-				 struct device *dev, struct sg_table *sgt,
-				 enum dma_data_direction dir)
-{
-}
-
 static inline int __spi_map_msg(struct spi_controller *ctlr,
 				struct spi_message *msg)
 {
@@ -1222,6 +1212,7 @@ static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread)
 	if (!was_busy && ctlr->auto_runtime_pm) {
 		ret = pm_runtime_get_sync(ctlr->dev.parent);
 		if (ret < 0) {
+			pm_runtime_put_noidle(ctlr->dev.parent);
 			dev_err(&ctlr->dev, "Failed to power device: %d\n",
 				ret);
 			mutex_unlock(&ctlr->io_mutex);
@@ -1533,6 +1524,22 @@ err_init_queue:
 	return ret;
 }
 
+/**
+ * spi_flush_queue - Send all pending messages in the queue from the callers'
+ *		     context
+ * @ctlr: controller to process queue for
+ *
+ * This should be used when one wants to ensure all pending messages have been
+ * sent before doing something. Is used by the spi-mem code to make sure SPI
+ * memory operations do not preempt regular SPI transfers that have been queued
+ * before the spi-mem operation.
+ */
+void spi_flush_queue(struct spi_controller *ctlr)
+{
+	if (ctlr->transfer == spi_queued_transfer)
+		__spi_pump_messages(ctlr, false);
+}
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_OF)
@@ -2063,6 +2070,26 @@ static int of_spi_register_master(struct spi_controller *ctlr)
 }
 #endif
 
+static int spi_controller_check_ops(struct spi_controller *ctlr)
+{
+	/*
+	 * The controller may implement only the high-level SPI-memory like
+	 * operations if it does not support regular SPI transfers, and this is
+	 * valid use case.
+	 * If ->mem_ops is NULL, we request that at least one of the
+	 * ->transfer_xxx() method be implemented.
+	 */
+	if (ctlr->mem_ops) {
+		if (!ctlr->mem_ops->exec_op)
+			return -EINVAL;
+	} else if (!ctlr->transfer && !ctlr->transfer_one &&
+		   !ctlr->transfer_one_message) {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /**
  * spi_register_controller - register SPI master or slave controller
  * @ctlr: initialized master, originally from spi_alloc_master() or
@@ -2096,6 +2123,14 @@ int spi_register_controller(struct spi_controller *ctlr)
 	if (!dev)
 		return -ENODEV;
 
+	/*
+	 * Make sure all necessary hooks are implemented before registering
+	 * the SPI controller.
+	 */
+	status = spi_controller_check_ops(ctlr);
+	if (status)
+		return status;
+
 	if (!spi_controller_is_slave(ctlr)) {
 		status = of_spi_register_master(ctlr);
 		if (status)
@@ -2161,10 +2196,14 @@ int spi_register_controller(struct spi_controller *ctlr)
 			spi_controller_is_slave(ctlr) ? "slave" : "master",
 			dev_name(&ctlr->dev));
 
-	/* If we're using a queued driver, start the queue */
-	if (ctlr->transfer)
+	/*
+	 * If we're using a queued driver, start the queue. Note that we don't
+	 * need the queueing logic if the driver is only supporting high-level
+	 * memory operations.
+	 */
+	if (ctlr->transfer) {
 		dev_info(dev, "controller is unqueued, this is deprecated\n");
-	else {
+	} else if (ctlr->transfer_one || ctlr->transfer_one_message) {
 		status = spi_controller_initialize_queue(ctlr);
 		if (status) {
 			device_del(&ctlr->dev);
@@ -2894,6 +2933,13 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
 {
 	struct spi_controller *ctlr = spi->controller;
 
+	/*
+	 * Some controllers do not support doing regular SPI transfers. Return
+	 * ENOTSUPP when this is the case.
+	 */
+	if (!ctlr->transfer)
+		return -ENOTSUPP;
+
 	message->spi = spi;
 
 	SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_async);
@@ -3010,63 +3056,6 @@ int spi_async_locked(struct spi_device *spi, struct spi_message *message)
 }
 EXPORT_SYMBOL_GPL(spi_async_locked);
 
-
-int spi_flash_read(struct spi_device *spi,
-		   struct spi_flash_read_message *msg)
-
-{
-	struct spi_controller *master = spi->controller;
-	struct device *rx_dev = NULL;
-	int ret;
-
-	if ((msg->opcode_nbits == SPI_NBITS_DUAL ||
-	     msg->addr_nbits == SPI_NBITS_DUAL) &&
-	    !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
-		return -EINVAL;
-	if ((msg->opcode_nbits == SPI_NBITS_QUAD ||
-	     msg->addr_nbits == SPI_NBITS_QUAD) &&
-	    !(spi->mode & SPI_TX_QUAD))
-		return -EINVAL;
-	if (msg->data_nbits == SPI_NBITS_DUAL &&
-	    !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
-		return -EINVAL;
-	if (msg->data_nbits == SPI_NBITS_QUAD &&
-	    !(spi->mode &  SPI_RX_QUAD))
-		return -EINVAL;
-
-	if (master->auto_runtime_pm) {
-		ret = pm_runtime_get_sync(master->dev.parent);
-		if (ret < 0) {
-			dev_err(&master->dev, "Failed to power device: %d\n",
-				ret);
-			return ret;
-		}
-	}
-
-	mutex_lock(&master->bus_lock_mutex);
-	mutex_lock(&master->io_mutex);
-	if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) {
-		rx_dev = master->dma_rx->device->dev;
-		ret = spi_map_buf(master, rx_dev, &msg->rx_sg,
-				  msg->buf, msg->len,
-				  DMA_FROM_DEVICE);
-		if (!ret)
-			msg->cur_msg_mapped = true;
-	}
-	ret = master->spi_flash_read(spi, msg);
-	if (msg->cur_msg_mapped)
-		spi_unmap_buf(master, rx_dev, &msg->rx_sg,
-			      DMA_FROM_DEVICE);
-	mutex_unlock(&master->io_mutex);
-	mutex_unlock(&master->bus_lock_mutex);
-
-	if (master->auto_runtime_pm)
-		pm_runtime_put(master->dev.parent);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(spi_flash_read);
-
 /*-------------------------------------------------------------------------*/
 
 /* Utility methods for SPI protocol drivers, layered on
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
new file mode 100644
index 000000000000..bb4bd15ae1f6
--- /dev/null
+++ b/include/linux/spi/spi-mem.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Exceet Electronics GmbH
+ * Copyright (C) 2018 Bootlin
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef __LINUX_SPI_MEM_H
+#define __LINUX_SPI_MEM_H
+
+#include <linux/spi/spi.h>
+
+#define SPI_MEM_OP_CMD(__opcode, __buswidth)			\
+	{							\
+		.buswidth = __buswidth,				\
+		.opcode = __opcode,				\
+	}
+
+#define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth)		\
+	{							\
+		.nbytes = __nbytes,				\
+		.val = __val,					\
+		.buswidth = __buswidth,				\
+	}
+
+#define SPI_MEM_OP_NO_ADDR	{ }
+
+#define SPI_MEM_OP_DUMMY(__nbytes, __buswidth)			\
+	{							\
+		.nbytes = __nbytes,				\
+		.buswidth = __buswidth,				\
+	}
+
+#define SPI_MEM_OP_NO_DUMMY	{ }
+
+#define SPI_MEM_OP_DATA_IN(__nbytes, __buf, __buswidth)		\
+	{							\
+		.dir = SPI_MEM_DATA_IN,				\
+		.nbytes = __nbytes,				\
+		.buf.in = __buf,				\
+		.buswidth = __buswidth,				\
+	}
+
+#define SPI_MEM_OP_DATA_OUT(__nbytes, __buf, __buswidth)	\
+	{							\
+		.dir = SPI_MEM_DATA_OUT,			\
+		.nbytes = __nbytes,				\
+		.buf.out = __buf,				\
+		.buswidth = __buswidth,				\
+	}
+
+#define SPI_MEM_OP_NO_DATA	{ }
+
+/**
+ * enum spi_mem_data_dir - describes the direction of a SPI memory data
+ *			   transfer from the controller perspective
+ * @SPI_MEM_DATA_IN: data coming from the SPI memory
+ * @SPI_MEM_DATA_OUT: data sent the SPI memory
+ */
+enum spi_mem_data_dir {
+	SPI_MEM_DATA_IN,
+	SPI_MEM_DATA_OUT,
+};
+
+/**
+ * struct spi_mem_op - describes a SPI memory operation
+ * @cmd.buswidth: number of IO lines used to transmit the command
+ * @cmd.opcode: operation opcode
+ * @addr.nbytes: number of address bytes to send. Can be zero if the operation
+ *		 does not need to send an address
+ * @addr.buswidth: number of IO lines used to transmit the address cycles
+ * @addr.val: address value. This value is always sent MSB first on the bus.
+ *	      Note that only @addr.nbytes are taken into account in this
+ *	      address value, so users should make sure the value fits in the
+ *	      assigned number of bytes.
+ * @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can
+ *		  be zero if the operation does not require dummy bytes
+ * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
+ * @data.buswidth: number of IO lanes used to send/receive the data
+ * @data.dir: direction of the transfer
+ * @data.buf.in: input buffer
+ * @data.buf.out: output buffer
+ */
+struct spi_mem_op {
+	struct {
+		u8 buswidth;
+		u8 opcode;
+	} cmd;
+
+	struct {
+		u8 nbytes;
+		u8 buswidth;
+		u64 val;
+	} addr;
+
+	struct {
+		u8 nbytes;
+		u8 buswidth;
+	} dummy;
+
+	struct {
+		u8 buswidth;
+		enum spi_mem_data_dir dir;
+		unsigned int nbytes;
+		/* buf.{in,out} must be DMA-able. */
+		union {
+			void *in;
+			const void *out;
+		} buf;
+	} data;
+};
+
+#define SPI_MEM_OP(__cmd, __addr, __dummy, __data)		\
+	{							\
+		.cmd = __cmd,					\
+		.addr = __addr,					\
+		.dummy = __dummy,				\
+		.data = __data,					\
+	}
+
+/**
+ * struct spi_mem - describes a SPI memory device
+ * @spi: the underlying SPI device
+ * @drvpriv: spi_mem_drviver private data
+ *
+ * Extra information that describe the SPI memory device and may be needed by
+ * the controller to properly handle this device should be placed here.
+ *
+ * One example would be the device size since some controller expose their SPI
+ * mem devices through a io-mapped region.
+ */
+struct spi_mem {
+	struct spi_device *spi;
+	void *drvpriv;
+};
+
+/**
+ * struct spi_mem_set_drvdata() - attach driver private data to a SPI mem
+ *				  device
+ * @mem: memory device
+ * @data: data to attach to the memory device
+ */
+static inline void spi_mem_set_drvdata(struct spi_mem *mem, void *data)
+{
+	mem->drvpriv = data;
+}
+
+/**
+ * struct spi_mem_get_drvdata() - get driver private data attached to a SPI mem
+ *				  device
+ * @mem: memory device
+ *
+ * Return: the data attached to the mem device.
+ */
+static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
+{
+	return mem->drvpriv;
+}
+
+/**
+ * struct spi_controller_mem_ops - SPI memory operations
+ * @adjust_op_size: shrink the data xfer of an operation to match controller's
+ *		    limitations (can be alignment of max RX/TX size
+ *		    limitations)
+ * @supports_op: check if an operation is supported by the controller
+ * @exec_op: execute a SPI memory operation
+ *
+ * This interface should be implemented by SPI controllers providing an
+ * high-level interface to execute SPI memory operation, which is usually the
+ * case for QSPI controllers.
+ */
+struct spi_controller_mem_ops {
+	int (*adjust_op_size)(struct spi_mem *mem, struct spi_mem_op *op);
+	bool (*supports_op)(struct spi_mem *mem,
+			    const struct spi_mem_op *op);
+	int (*exec_op)(struct spi_mem *mem,
+		       const struct spi_mem_op *op);
+};
+
+/**
+ * struct spi_mem_driver - SPI memory driver
+ * @spidrv: inherit from a SPI driver
+ * @probe: probe a SPI memory. Usually where detection/initialization takes
+ *	   place
+ * @remove: remove a SPI memory
+ * @shutdown: take appropriate action when the system is shutdown
+ *
+ * This is just a thin wrapper around a spi_driver. The core takes care of
+ * allocating the spi_mem object and forwarding the probe/remove/shutdown
+ * request to the spi_mem_driver. The reason we use this wrapper is because
+ * we might have to stuff more information into the spi_mem struct to let
+ * SPI controllers know more about the SPI memory they interact with, and
+ * having this intermediate layer allows us to do that without adding more
+ * useless fields to the spi_device object.
+ */
+struct spi_mem_driver {
+	struct spi_driver spidrv;
+	int (*probe)(struct spi_mem *mem);
+	int (*remove)(struct spi_mem *mem);
+	void (*shutdown)(struct spi_mem *mem);
+};
+
+#if IS_ENABLED(CONFIG_SPI_MEM)
+int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+				       const struct spi_mem_op *op,
+				       struct sg_table *sg);
+
+void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+					  const struct spi_mem_op *op,
+					  struct sg_table *sg);
+#else
+static inline int
+spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+				   const struct spi_mem_op *op,
+				   struct sg_table *sg)
+{
+	return -ENOTSUPP;
+}
+
+static inline void
+spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+				     const struct spi_mem_op *op,
+				     struct sg_table *sg)
+{
+}
+#endif /* CONFIG_SPI_MEM */
+
+int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op);
+
+bool spi_mem_supports_op(struct spi_mem *mem,
+			 const struct spi_mem_op *op);
+
+int spi_mem_exec_op(struct spi_mem *mem,
+		    const struct spi_mem_op *op);
+
+int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv,
+				       struct module *owner);
+
+void spi_mem_driver_unregister(struct spi_mem_driver *drv);
+
+#define spi_mem_driver_register(__drv)                                  \
+	spi_mem_driver_register_with_owner(__drv, THIS_MODULE)
+
+#define module_spi_mem_driver(__drv)                                    \
+	module_driver(__drv, spi_mem_driver_register,                   \
+		      spi_mem_driver_unregister)
+
+#endif /* __LINUX_SPI_MEM_H */
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index bc6bb325d1bf..a64235e05321 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -26,7 +26,7 @@ struct dma_chan;
 struct property_entry;
 struct spi_controller;
 struct spi_transfer;
-struct spi_flash_read_message;
+struct spi_controller_mem_ops;
 
 /*
  * INTERFACES between SPI master-side drivers and SPI slave protocol handlers,
@@ -376,13 +376,11 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *                    transfer_one callback.
  * @handle_err: the subsystem calls the driver to handle an error that occurs
  *		in the generic implementation of transfer_one_message().
+ * @mem_ops: optimized/dedicated operations for interactions with SPI memory.
+ *	     This field is optional and should only be implemented if the
+ *	     controller has native support for memory like operations.
  * @unprepare_message: undo any work done by prepare_message().
  * @slave_abort: abort the ongoing transfer request on an SPI slave controller
- * @spi_flash_read: to support spi-controller hardwares that provide
- *                  accelerated interface to read from flash devices.
- * @spi_flash_can_dma: analogous to can_dma() interface, but for
- *		       controllers implementing spi_flash_read.
- * @flash_read_supported: spi device supports flash read
  * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
  *	number. Any individual value may be -ENOENT for CS lines that
  *	are not GPIOs (driven by the SPI controller itself).
@@ -548,11 +546,6 @@ struct spi_controller {
 	int (*unprepare_message)(struct spi_controller *ctlr,
 				 struct spi_message *message);
 	int (*slave_abort)(struct spi_controller *ctlr);
-	int (*spi_flash_read)(struct  spi_device *spi,
-			      struct spi_flash_read_message *msg);
-	bool (*spi_flash_can_dma)(struct spi_device *spi,
-				  struct spi_flash_read_message *msg);
-	bool (*flash_read_supported)(struct spi_device *spi);
 
 	/*
 	 * These hooks are for drivers that use a generic implementation
@@ -564,6 +557,9 @@ struct spi_controller {
 	void (*handle_err)(struct spi_controller *ctlr,
 			   struct spi_message *message);
 
+	/* Optimized handlers for SPI memory-like operations. */
+	const struct spi_controller_mem_ops *mem_ops;
+
 	/* gpio chip select */
 	int			*cs_gpios;
 
@@ -1183,48 +1179,6 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
 	return be16_to_cpu(result);
 }
 
-/**
- * struct spi_flash_read_message - flash specific information for
- * spi-masters that provide accelerated flash read interfaces
- * @buf: buffer to read data
- * @from: offset within the flash from where data is to be read
- * @len: length of data to be read
- * @retlen: actual length of data read
- * @read_opcode: read_opcode to be used to communicate with flash
- * @addr_width: number of address bytes
- * @dummy_bytes: number of dummy bytes
- * @opcode_nbits: number of lines to send opcode
- * @addr_nbits: number of lines to send address
- * @data_nbits: number of lines for data
- * @rx_sg: Scatterlist for receive data read from flash
- * @cur_msg_mapped: message has been mapped for DMA
- */
-struct spi_flash_read_message {
-	void *buf;
-	loff_t from;
-	size_t len;
-	size_t retlen;
-	u8 read_opcode;
-	u8 addr_width;
-	u8 dummy_bytes;
-	u8 opcode_nbits;
-	u8 addr_nbits;
-	u8 data_nbits;
-	struct sg_table rx_sg;
-	bool cur_msg_mapped;
-};
-
-/* SPI core interface for flash read support */
-static inline bool spi_flash_read_supported(struct spi_device *spi)
-{
-	return spi->controller->spi_flash_read &&
-	       (!spi->controller->flash_read_supported ||
-	       spi->controller->flash_read_supported(spi));
-}
-
-int spi_flash_read(struct spi_device *spi,
-		   struct spi_flash_read_message *msg);
-
 /*---------------------------------------------------------------------------*/
 
 /*