Merge tag 'phy-for-4.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.14

 *) Add USB PHY driver for Ralink SoC
 *) Make phy-mt65xx-usb3 driver support PCIe and SATA phy
 *) Add mediatek directory and rename phy-mt65xx-usb3 to phy-mtk-tphy.c
    since it now supports USB3.0, PCIe and SATA PHYs
 *) Make sun4i-usb-phy driver support USB PHYs for A83T SoC
 *) Make phy-qcom-qmp driver support USB PHYs for IPQ8074 SoC
 *) Make rockchip-inno-usb2 driver support usb2-phy for rv1108 SoC
 *) Minor fixes in phy drivers

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

25 files changed, 1200 insertions, 253 deletions

diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
index 0acc5a99fb79..faf18084a33a 100644
--- a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
@@ -1,13 +1,18 @@
-mt65xx USB3.0 PHY binding
+MediaTek T-PHY binding
 --------------------------
 
-This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
+T-phy controller supports physical layer functionality for a number of
+controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
 
 Required properties (controller (parent) node):
  - compatible	: should be one of
-		  "mediatek,mt2701-u3phy"
-		  "mediatek,mt2712-u3phy"
-		  "mediatek,mt8173-u3phy"
+		  "mediatek,generic-tphy-v1"
+		  "mediatek,generic-tphy-v2"
+		  "mediatek,mt2701-u3phy" (deprecated)
+		  "mediatek,mt2712-u3phy" (deprecated)
+		  "mediatek,mt8173-u3phy";
+		  make use of "mediatek,generic-tphy-v1" on mt2701 instead and
+		  "mediatek,generic-tphy-v2" on mt2712 instead.
  - clocks	: (deprecated, use port's clocks instead) a list of phandle +
 		  clock-specifier pairs, one for each entry in clock-names
  - clock-names	: (deprecated, use port's one instead) must contain
@@ -35,6 +40,8 @@ Required properties (port (child) node):
 		  cell after port phandle is phy type from:
 			- PHY_TYPE_USB2
 			- PHY_TYPE_USB3
+			- PHY_TYPE_PCIE
+			- PHY_TYPE_SATA
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index 84d59b0db8df..a67ef2a3874f 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -6,6 +6,7 @@ Required properties (phy (parent) node):
 	* "rockchip,rk3328-usb2phy"
 	* "rockchip,rk3366-usb2phy"
 	* "rockchip,rk3399-usb2phy"
+	* "rockchip,rv1108-usb2phy"
  - reg : the address offset of grf for usb-phy configuration.
  - #clock-cells : should be 0.
  - clock-output-names : specify the 480m output clock name.
@@ -18,6 +19,10 @@ Optional properties:
 		 usb-phy output 480m and xin24m.
 		 Refer to clk/clock-bindings.txt for generic clock
 		 consumer properties.
+ - rockchip,usbgrf : phandle to the syscon managing the "usb general
+		 register files". When set driver will request its
+		 phandle as one companion-grf for some special SoCs
+		 (e.g RV1108).
 
 Required nodes : a sub-node is required for each port the phy provides.
 		 The sub-node name is used to identify host or otg port,
@@ -28,10 +33,14 @@ Required nodes : a sub-node is required for each port the phy provides.
 Required properties (port (child) node):
  - #phy-cells : must be 0. See ./phy-bindings.txt for details.
  - interrupts : specify an interrupt for each entry in interrupt-names.
- - interrupt-names : a list which shall be the following entries:
+ - interrupt-names : a list which should be one of the following cases:
+	Regular case:
 	* "otg-id" : for the otg id interrupt.
 	* "otg-bvalid" : for the otg vbus interrupt.
 	* "linestate" : for the host/otg linestate interrupt.
+	Some SoCs use one interrupt with the above muxed together, so for these
+	* "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate
+		to one.
 
 Optional properties:
  - phy-supply : phandle to a regulator that provides power to VBUS.
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index e11c563a65ec..b6a9f2b92bab 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -6,6 +6,7 @@ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
 Required properties:
  - compatible: compatible list, contains:
+	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
 	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
 
@@ -38,6 +39,8 @@ Required properties:
 		 "phy", "common", "cfg".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
 		 "phy", "common".
+		For "qcom,ipq8074-qmp-pcie-phy" must contain:
+		 "phy", "common".
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -60,6 +63,13 @@ Required properties for child node:
 	   one for each entry in clock-names.
  - clock-names: Must contain following for pcie and usb qmp phys:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
+ - clock-output-names: Name of the PHY clock that will be the parent for
+		       the above pipe clock.
+
+	For "qcom,ipq8074-qmp-pcie-phy":
+		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
+			(or)
+		  "pcie20_phy1_pipe_clk"
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
@@ -96,6 +106,7 @@ Example:
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "pipe0";
+			clock-output-names = "pcie_0_pipe_clk_src";
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "lane0";
 		};
diff --git a/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
new file mode 100644
index 000000000000..9d2868a437ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
@@ -0,0 +1,23 @@
+Mediatek/Ralink USB PHY
+
+Required properties:
+ - compatible: "ralink,rt3352-usbphy"
+	       "mediatek,mt7620-usbphy"
+	       "mediatek,mt7628-usbphy"
+ - reg: required for "mediatek,mt7628-usbphy", unused otherwise
+ - #phy-cells: should be 0
+ - ralink,sysctl: a phandle to a ralink syscon register region
+ - resets: the two reset controllers for host and device
+ - reset-names: the names of the 2 reset controllers
+
+Example:
+
+usbphy: phy {
+	compatible = "mediatek,mt7628-usbphy";
+	reg = <0x10120000 0x1000>;
+	#phy-cells = <0>;
+
+	ralink,sysctl = <&sysc>;
+	resets = <&rstctrl 22 &rstctrl 25>;
+	reset-names = "host", "device";
+};
diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index 005bc22938ff..cbc7847dbf6c 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -9,6 +9,7 @@ Required properties:
   * allwinner,sun7i-a20-usb-phy
   * allwinner,sun8i-a23-usb-phy
   * allwinner,sun8i-a33-usb-phy
+  * allwinner,sun8i-a83t-usb-phy
   * allwinner,sun8i-h3-usb-phy
   * allwinner,sun8i-v3s-usb-phy
   * allwinner,sun50i-a64-usb-phy
@@ -17,18 +18,22 @@ Required properties:
   * "phy_ctrl"
   * "pmu0" for H3, V3s and A64
   * "pmu1"
-  * "pmu2" for sun4i, sun6i or sun7i
+  * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
+  * "pmu3" for sun8i-h3
 - #phy-cells : from the generic phy bindings, must be 1
 - clocks : phandle + clock specifier for the phy clocks
 - clock-names :
   * "usb_phy" for sun4i, sun5i or sun7i
   * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
   * "usb0_phy", "usb1_phy" for sun8i
+  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t
+  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3
 - resets : a list of phandle + reset specifier pairs
 - reset-names :
   * "usb0_reset"
   * "usb1_reset"
-  * "usb2_reset" for sun4i, sun6i or sun7i
+  * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
+  * "usb3_reset" for sun8i-h3
 
 Optional properties:
 - usb0_id_det-gpios : gpio phandle for reading the otg id pin value
@@ -37,6 +42,7 @@ Optional properties:
 - usb0_vbus-supply : regulator phandle for controller usb0 vbus
 - usb1_vbus-supply : regulator phandle for controller usb1 vbus
 - usb2_vbus-supply : regulator phandle for controller usb2 vbus
+- usb3_vbus-supply : regulator phandle for controller usb3 vbus
 
 Example:
 	usbphy: phy@0x01c13400 {
diff --git a/MAINTAINERS b/MAINTAINERS
index fedbff3d15fa..761a363982d4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1570,7 +1570,7 @@ M:	Chunfeng Yun <chunfeng.yun@mediatek.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	drivers/phy/phy-mt65xx-usb3.c
+F:	drivers/phy/mediatek/phy-mtk-tphy.c
 
 ARM/MICREL KS8695 ARCHITECTURE
 M:	Greg Ungerer <gerg@uclinux.org>
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index c1807d4a0079..441912c10b82 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -26,14 +26,6 @@ config PHY_LPC18XX_USB_OTG
 	  This driver is need for USB0 support on LPC18xx/43xx and takes
 	  care of enabling and clock setup.
 
-config PHY_MT65XX_USB3
-	tristate "Mediatek USB3.0 PHY Driver"
-	depends on ARCH_MEDIATEK && OF
-	select GENERIC_PHY
-	help
-	  Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
-	  it supports multiple usb2.0 and usb3.0 ports.
-
 config PHY_PISTACHIO_USB
 	tristate "IMG Pistachio USB2.0 PHY driver"
 	depends on MACH_PISTACHIO
@@ -53,8 +45,10 @@ source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/hisilicon/Kconfig"
 source "drivers/phy/marvell/Kconfig"
+source "drivers/phy/mediatek/Kconfig"
 source "drivers/phy/motorola/Kconfig"
 source "drivers/phy/qualcomm/Kconfig"
+source "drivers/phy/ralink/Kconfig"
 source "drivers/phy/renesas/Kconfig"
 source "drivers/phy/rockchip/Kconfig"
 source "drivers/phy/samsung/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f252201e0ec9..06f3c500030d 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -4,12 +4,12 @@
 
 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
 obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
-obj-$(CONFIG_PHY_MT65XX_USB3)		+= phy-mt65xx-usb3.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 
 obj-$(CONFIG_ARCH_SUNXI)		+= allwinner/
 obj-$(CONFIG_ARCH_MESON)		+= amlogic/
+obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/
 obj-$(CONFIG_ARCH_RENESAS)		+= renesas/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra/
@@ -18,6 +18,7 @@ obj-y					+= broadcom/	\
 					   marvell/	\
 					   motorola/	\
 					   qualcomm/	\
+					   ralink/	\
 					   samsung/	\
 					   st/		\
 					   ti/
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index bbf06cfe5898..1161e11fb3cf 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -87,6 +87,16 @@
 #define PHY_DISCON_TH_SEL		0x2a
 #define PHY_SQUELCH_DETECT		0x3c
 
+/* A83T specific control bits for PHY0 */
+#define PHY_CTL_VBUSVLDEXT		BIT(5)
+#define PHY_CTL_SIDDQ			BIT(3)
+
+/* A83T specific control bits for PHY2 HSIC */
+#define SUNXI_EHCI_HS_FORCE		BIT(20)
+#define SUNXI_HSIC_CONNECT_DET		BIT(17)
+#define SUNXI_HSIC_CONNECT_INT		BIT(16)
+#define SUNXI_HSIC			BIT(1)
+
 #define MAX_PHYS			4
 
 /*
@@ -100,6 +110,7 @@ enum sun4i_usb_phy_type {
 	sun4i_a10_phy,
 	sun6i_a31_phy,
 	sun8i_a33_phy,
+	sun8i_a83t_phy,
 	sun8i_h3_phy,
 	sun8i_v3s_phy,
 	sun50i_a64_phy,
@@ -107,6 +118,7 @@ enum sun4i_usb_phy_type {
 
 struct sun4i_usb_phy_cfg {
 	int num_phys;
+	int hsic_index;
 	enum sun4i_usb_phy_type type;
 	u32 disc_thresh;
 	u8 phyctl_offset;
@@ -126,6 +138,7 @@ struct sun4i_usb_phy_data {
 		struct regulator *vbus;
 		struct reset_control *reset;
 		struct clk *clk;
+		struct clk *clk2;
 		bool regulator_on;
 		int index;
 	} phys[MAX_PHYS];
@@ -232,6 +245,7 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 
 static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
 {
+	struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
 	u32 bits, reg_value;
 
 	if (!phy->pmu)
@@ -240,6 +254,11 @@ static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
 	bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
 		SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
 
+	/* A83T USB2 is HSIC */
+	if (phy_data->cfg->type == sun8i_a83t_phy && phy->index == 2)
+		bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT |
+			SUNXI_HSIC;
+
 	reg_value = readl(phy->pmu);
 
 	if (enable)
@@ -261,27 +280,43 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 	if (ret)
 		return ret;
 
-	ret = reset_control_deassert(phy->reset);
+	ret = clk_prepare_enable(phy->clk2);
 	if (ret) {
 		clk_disable_unprepare(phy->clk);
 		return ret;
 	}
 
-	if (phy->pmu && data->cfg->enable_pmu_unk1) {
-		val = readl(phy->pmu + REG_PMU_UNK1);
-		writel(val & ~2, phy->pmu + REG_PMU_UNK1);
+	ret = reset_control_deassert(phy->reset);
+	if (ret) {
+		clk_disable_unprepare(phy->clk2);
+		clk_disable_unprepare(phy->clk);
+		return ret;
 	}
 
-	/* Enable USB 45 Ohm resistor calibration */
-	if (phy->index == 0)
-		sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
+	if (data->cfg->type == sun8i_a83t_phy) {
+		if (phy->index == 0) {
+			val = readl(data->base + data->cfg->phyctl_offset);
+			val |= PHY_CTL_VBUSVLDEXT;
+			val &= ~PHY_CTL_SIDDQ;
+			writel(val, data->base + data->cfg->phyctl_offset);
+		}
+	} else {
+		if (phy->pmu && data->cfg->enable_pmu_unk1) {
+			val = readl(phy->pmu + REG_PMU_UNK1);
+			writel(val & ~2, phy->pmu + REG_PMU_UNK1);
+		}
 
-	/* Adjust PHY's magnitude and rate */
-	sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+		/* Enable USB 45 Ohm resistor calibration */
+		if (phy->index == 0)
+			sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
 
-	/* Disconnect threshold adjustment */
-	sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
-			    data->cfg->disc_thresh, 2);
+		/* Adjust PHY's magnitude and rate */
+		sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
+
+		/* Disconnect threshold adjustment */
+		sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
+				    data->cfg->disc_thresh, 2);
+	}
 
 	sun4i_usb_phy_passby(phy, 1);
 
@@ -307,6 +342,13 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
 	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
 
 	if (phy->index == 0) {
+		if (data->cfg->type == sun8i_a83t_phy) {
+			void __iomem *phyctl = data->base +
+				data->cfg->phyctl_offset;
+
+			writel(readl(phyctl) | PHY_CTL_SIDDQ, phyctl);
+		}
+
 		/* Disable pull-ups */
 		sun4i_usb_phy0_update_iscr(_phy, ISCR_DPDM_PULLUP_EN, 0);
 		sun4i_usb_phy0_update_iscr(_phy, ISCR_ID_PULLUP_EN, 0);
@@ -315,6 +357,7 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
 
 	sun4i_usb_phy_passby(phy, 0);
 	reset_control_assert(phy->reset);
+	clk_disable_unprepare(phy->clk2);
 	clk_disable_unprepare(phy->clk);
 
 	return 0;
@@ -653,19 +696,25 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 
 	data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det",
 						    GPIOD_IN);
-	if (IS_ERR(data->id_det_gpio))
+	if (IS_ERR(data->id_det_gpio)) {
+		dev_err(dev, "Couldn't request ID GPIO\n");
 		return PTR_ERR(data->id_det_gpio);
+	}
 
 	data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det",
 						      GPIOD_IN);
-	if (IS_ERR(data->vbus_det_gpio))
+	if (IS_ERR(data->vbus_det_gpio)) {
+		dev_err(dev, "Couldn't request VBUS detect GPIO\n");
 		return PTR_ERR(data->vbus_det_gpio);
+	}
 
 	if (of_find_property(np, "usb0_vbus_power-supply", NULL)) {
 		data->vbus_power_supply = devm_power_supply_get_by_phandle(dev,
 						     "usb0_vbus_power-supply");
-		if (IS_ERR(data->vbus_power_supply))
+		if (IS_ERR(data->vbus_power_supply)) {
+			dev_err(dev, "Couldn't get the VBUS power supply\n");
 			return PTR_ERR(data->vbus_power_supply);
+		}
 
 		if (!data->vbus_power_supply)
 			return -EPROBE_DEFER;
@@ -674,8 +723,10 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
 
 	data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable);
-	if (IS_ERR(data->extcon))
+	if (IS_ERR(data->extcon)) {
+		dev_err(dev, "Couldn't allocate our extcon device\n");
 		return PTR_ERR(data->extcon);
+	}
 
 	ret = devm_extcon_dev_register(dev, data->extcon);
 	if (ret) {
@@ -690,8 +741,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 		snprintf(name, sizeof(name), "usb%d_vbus", i);
 		phy->vbus = devm_regulator_get_optional(dev, name);
 		if (IS_ERR(phy->vbus)) {
-			if (PTR_ERR(phy->vbus) == -EPROBE_DEFER)
+			if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) {
+				dev_err(dev,
+					"Couldn't get regulator %s... Deferring probe\n",
+					name);
 				return -EPROBE_DEFER;
+			}
+
 			phy->vbus = NULL;
 		}
 
@@ -706,6 +762,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 			return PTR_ERR(phy->clk);
 		}
 
+		/* The first PHY is always tied to OTG, and never HSIC */
+		if (data->cfg->hsic_index && i == data->cfg->hsic_index) {
+			/* HSIC needs secondary clock */
+			snprintf(name, sizeof(name), "usb%d_hsic_12M", i);
+			phy->clk2 = devm_clk_get(dev, name);
+			if (IS_ERR(phy->clk2)) {
+				dev_err(dev, "failed to get clock %s\n", name);
+				return PTR_ERR(phy->clk2);
+			}
+		}
+
 		snprintf(name, sizeof(name), "usb%d_reset", i);
 		phy->reset = devm_reset_control_get(dev, name);
 		if (IS_ERR(phy->reset)) {
@@ -775,6 +842,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(phy_provider);
 	}
 
+	dev_dbg(dev, "successfully loaded\n");
+
 	return 0;
 }
 
@@ -832,6 +901,14 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
 	.enable_pmu_unk1 = false,
 };
 
+static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
+	.num_phys = 3,
+	.hsic_index = 2,
+	.type = sun8i_a83t_phy,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+};
+
 static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
 	.num_phys = 4,
 	.type = sun8i_h3_phy,
@@ -868,6 +945,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
 	{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
 	{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
+	{ .compatible = "allwinner,sun8i-a83t-usb-phy", .data = &sun8i_a83t_cfg },
 	{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
 	{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index e6544c8b1ace..9d7f74fe3d7c 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -335,7 +335,7 @@ static int brcm_nsp_sata_init(struct brcm_sata_port *port)
 
 	/* Wait for pll_seq_done bit */
 	try = 50;
-	while (try--) {
+	while (--try) {
 		val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
 					BLOCK0_XGXSSTATUS);
 		if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
new file mode 100644
index 000000000000..88ab4e25e34f
--- /dev/null
+++ b/drivers/phy/mediatek/Kconfig
@@ -0,0 +1,14 @@
+#
+# Phy drivers for Mediatek devices
+#
+config PHY_MTK_TPHY
+    tristate "MediaTek T-PHY Driver"
+    depends on ARCH_MEDIATEK && OF
+    select GENERIC_PHY
+    help
+      Say 'Y' here to add support for MediaTek T-PHY driver,
+      it supports multiple usb2.0, usb3.0 ports, PCIe and
+	  SATA, and meanwhile supports two version T-PHY which have
+	  different banks layout, the T-PHY with shared banks between
+	  multi-ports is first version, otherwise is second veriosn,
+	  so you can easily distinguish them by banks layout.
diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
new file mode 100644
index 000000000000..763a92eefa00
--- /dev/null
+++ b/drivers/phy/mediatek/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the phy drivers.
+#
+
+obj-$(CONFIG_PHY_MTK_TPHY)		+= phy-mtk-tphy.o
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 59b110f795c3..e3baad78521f 100644
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -29,7 +29,7 @@
 #define SSUSB_SIFSLV_V1_U2FREQ		0x100	/* shared by u2 phys */
 /* u2 phy bank */
 #define SSUSB_SIFSLV_V1_U2PHY_COM	0x000
-/* u3 phy banks */
+/* u3/pcie/sata phy banks */
 #define SSUSB_SIFSLV_V1_U3PHYD		0x000
 #define SSUSB_SIFSLV_V1_U3PHYA		0x200
 
@@ -38,7 +38,7 @@
 #define SSUSB_SIFSLV_V2_MISC		0x000
 #define SSUSB_SIFSLV_V2_U2FREQ		0x100
 #define SSUSB_SIFSLV_V2_U2PHY_COM	0x300
-/* u3 phy banks */
+/* u3/pcie/sata phy banks */
 #define SSUSB_SIFSLV_V2_SPLLC		0x000
 #define SSUSB_SIFSLV_V2_CHIP		0x100
 #define SSUSB_SIFSLV_V2_U3PHYD		0x200
@@ -99,6 +99,23 @@
 #define P2C_RG_SESSEND			BIT(4)
 #define P2C_RG_AVALID			BIT(2)
 
+#define U3P_U3_CHIP_GPIO_CTLD		0x0c
+#define P3C_REG_IP_SW_RST		BIT(31)
+#define P3C_MCU_BUS_CK_GATE_EN		BIT(30)
+#define P3C_FORCE_IP_SW_RST		BIT(29)
+
+#define U3P_U3_CHIP_GPIO_CTLE		0x10
+#define P3C_RG_SWRST_U3_PHYD		BIT(25)
+#define P3C_RG_SWRST_U3_PHYD_FORCE_EN	BIT(24)
+
+#define U3P_U3_PHYA_REG0	0x000
+#define P3A_RG_CLKDRV_OFF		GENMASK(3, 2)
+#define P3A_RG_CLKDRV_OFF_VAL(x)	((0x3 & (x)) << 2)
+
+#define U3P_U3_PHYA_REG1	0x004
+#define P3A_RG_CLKDRV_AMP		GENMASK(31, 29)
+#define P3A_RG_CLKDRV_AMP_VAL(x)	((0x7 & (x)) << 29)
+
 #define U3P_U3_PHYA_REG6	0x018
 #define P3A_RG_TX_EIDLE_CM		GENMASK(31, 28)
 #define P3A_RG_TX_EIDLE_CM_VAL(x)	((0xf & (x)) << 28)
@@ -108,9 +125,40 @@
 #define P3A_RG_RX_DAC_MUX_VAL(x)	((0x1f & (x)) << 1)
 
 #define U3P_U3_PHYA_DA_REG0	0x100
+#define P3A_RG_XTAL_EXT_PE2H		GENMASK(17, 16)
+#define P3A_RG_XTAL_EXT_PE2H_VAL(x)	((0x3 & (x)) << 16)
+#define P3A_RG_XTAL_EXT_PE1H		GENMASK(13, 12)
+#define P3A_RG_XTAL_EXT_PE1H_VAL(x)	((0x3 & (x)) << 12)
 #define P3A_RG_XTAL_EXT_EN_U3		GENMASK(11, 10)
 #define P3A_RG_XTAL_EXT_EN_U3_VAL(x)	((0x3 & (x)) << 10)
 
+#define U3P_U3_PHYA_DA_REG4	0x108
+#define P3A_RG_PLL_DIVEN_PE2H		GENMASK(21, 19)
+#define P3A_RG_PLL_BC_PE2H		GENMASK(7, 6)
+#define P3A_RG_PLL_BC_PE2H_VAL(x)	((0x3 & (x)) << 6)
+
+#define U3P_U3_PHYA_DA_REG5	0x10c
+#define P3A_RG_PLL_BR_PE2H		GENMASK(29, 28)
+#define P3A_RG_PLL_BR_PE2H_VAL(x)	((0x3 & (x)) << 28)
+#define P3A_RG_PLL_IC_PE2H		GENMASK(15, 12)
+#define P3A_RG_PLL_IC_PE2H_VAL(x)	((0xf & (x)) << 12)
+
+#define U3P_U3_PHYA_DA_REG6	0x110
+#define P3A_RG_PLL_IR_PE2H		GENMASK(19, 16)
+#define P3A_RG_PLL_IR_PE2H_VAL(x)	((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG7	0x114
+#define P3A_RG_PLL_BP_PE2H		GENMASK(19, 16)
+#define P3A_RG_PLL_BP_PE2H_VAL(x)	((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG20	0x13c
+#define P3A_RG_PLL_DELTA1_PE2H		GENMASK(31, 16)
+#define P3A_RG_PLL_DELTA1_PE2H_VAL(x)	((0xffff & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG25	0x148
+#define P3A_RG_PLL_DELTA_PE2H		GENMASK(15, 0)
+#define P3A_RG_PLL_DELTA_PE2H_VAL(x)	(0xffff & (x))
+
 #define U3P_U3_PHYD_LFPS1		0x00c
 #define P3D_RG_FWAKE_TH		GENMASK(21, 16)
 #define P3D_RG_FWAKE_TH_VAL(x)	((0x3f & (x)) << 16)
@@ -151,15 +199,74 @@
 #define U3P_SR_COEF_DIVISOR	1000
 #define U3P_FM_DET_CYCLE_CNT	1024
 
-enum mt_phy_version {
-	MT_PHY_V1 = 1,
-	MT_PHY_V2,
+/* SATA register setting */
+#define PHYD_CTRL_SIGNAL_MODE4		0x1c
+/* CDR Charge Pump P-path current adjustment */
+#define RG_CDR_BICLTD1_GEN1_MSK		GENMASK(23, 20)
+#define RG_CDR_BICLTD1_GEN1_VAL(x)	((0xf & (x)) << 20)
+#define RG_CDR_BICLTD0_GEN1_MSK		GENMASK(11, 8)
+#define RG_CDR_BICLTD0_GEN1_VAL(x)	((0xf & (x)) << 8)
+
+#define PHYD_DESIGN_OPTION2		0x24
+/* Symbol lock count selection */
+#define RG_LOCK_CNT_SEL_MSK		GENMASK(5, 4)
+#define RG_LOCK_CNT_SEL_VAL(x)		((0x3 & (x)) << 4)
+
+#define PHYD_DESIGN_OPTION9	0x40
+/* COMWAK GAP width window */
+#define RG_TG_MAX_MSK		GENMASK(20, 16)
+#define RG_TG_MAX_VAL(x)	((0x1f & (x)) << 16)
+/* COMINIT GAP width window */
+#define RG_T2_MAX_MSK		GENMASK(13, 8)
+#define RG_T2_MAX_VAL(x)	((0x3f & (x)) << 8)
+/* COMWAK GAP width window */
+#define RG_TG_MIN_MSK		GENMASK(7, 5)
+#define RG_TG_MIN_VAL(x)	((0x7 & (x)) << 5)
+/* COMINIT GAP width window */
+#define RG_T2_MIN_MSK		GENMASK(4, 0)
+#define RG_T2_MIN_VAL(x)	(0x1f & (x))
+
+#define ANA_RG_CTRL_SIGNAL1		0x4c
+/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
+#define RG_IDRV_0DB_GEN1_MSK		GENMASK(13, 8)
+#define RG_IDRV_0DB_GEN1_VAL(x)		((0x3f & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL4		0x58
+#define RG_CDR_BICLTR_GEN1_MSK		GENMASK(23, 20)
+#define RG_CDR_BICLTR_GEN1_VAL(x)	((0xf & (x)) << 20)
+/* Loop filter R1 resistance adjustment for Gen1 speed */
+#define RG_CDR_BR_GEN2_MSK		GENMASK(10, 8)
+#define RG_CDR_BR_GEN2_VAL(x)		((0x7 & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL6		0x60
+/* I-path capacitance adjustment for Gen1 */
+#define RG_CDR_BC_GEN1_MSK		GENMASK(28, 24)
+#define RG_CDR_BC_GEN1_VAL(x)		((0x1f & (x)) << 24)
+#define RG_CDR_BIRLTR_GEN1_MSK		GENMASK(4, 0)
+#define RG_CDR_BIRLTR_GEN1_VAL(x)	(0x1f & (x))
+
+#define ANA_EQ_EYE_CTRL_SIGNAL1		0x6c
+/* RX Gen1 LEQ tuning step */
+#define RG_EQ_DLEQ_LFI_GEN1_MSK		GENMASK(11, 8)
+#define RG_EQ_DLEQ_LFI_GEN1_VAL(x)	((0xf & (x)) << 8)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL4		0xd8
+#define RG_CDR_BIRLTD0_GEN1_MSK		GENMASK(20, 16)
+#define RG_CDR_BIRLTD0_GEN1_VAL(x)	((0x1f & (x)) << 16)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL5		0xdc
+#define RG_CDR_BIRLTD0_GEN3_MSK		GENMASK(4, 0)
+#define RG_CDR_BIRLTD0_GEN3_VAL(x)	(0x1f & (x))
+
+enum mtk_phy_version {
+	MTK_PHY_V1 = 1,
+	MTK_PHY_V2,
 };
 
-struct mt65xx_phy_pdata {
+struct mtk_phy_pdata {
 	/* avoid RX sensitivity level degradation only for mt8173 */
 	bool avoid_rx_sen_degradation;
-	enum mt_phy_version version;
+	enum mtk_phy_version version;
 };
 
 struct u2phy_banks {
@@ -175,7 +282,7 @@ struct u3phy_banks {
 	void __iomem *phya; /* include u3phya_da */
 };
 
-struct mt65xx_phy_instance {
+struct mtk_phy_instance {
 	struct phy *phy;
 	void __iomem *port_base;
 	union {
@@ -187,18 +294,18 @@ struct mt65xx_phy_instance {
 	u8 type;
 };
 
-struct mt65xx_u3phy {
+struct mtk_tphy {
 	struct device *dev;
 	void __iomem *sif_base;	/* only shared sif */
 	/* deprecated, use @ref_clk instead in phy instance */
 	struct clk *u3phya_ref;	/* reference clock of usb3 anolog phy */
-	const struct mt65xx_phy_pdata *pdata;
-	struct mt65xx_phy_instance **phys;
+	const struct mtk_phy_pdata *pdata;
+	struct mtk_phy_instance **phys;
 	int nphys;
 };
 
-static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy,
-	struct mt65xx_phy_instance *instance)
+static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
 {
 	struct u2phy_banks *u2_banks = &instance->u2_banks;
 	void __iomem *fmreg = u2_banks->fmreg;
@@ -222,7 +329,7 @@ static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy,
 	tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
 	tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL);
 	tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT);
-	if (u3phy->pdata->version == MT_PHY_V1)
+	if (tphy->pdata->version == MTK_PHY_V1)
 		tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index >> 1);
 
 	writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
@@ -257,7 +364,7 @@ static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy,
 		/* if FM detection fail, set default value */
 		calibration_val = 4;
 	}
-	dev_dbg(u3phy->dev, "phy:%d, fm_out:%d, calib:%d\n",
+	dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d\n",
 		instance->index, fm_out, calibration_val);
 
 	/* set HS slew rate */
@@ -272,8 +379,8 @@ static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy,
 	writel(tmp, com + U3P_USBPHYACR5);
 }
 
-static void u3_phy_instance_init(struct mt65xx_u3phy *u3phy,
-	struct mt65xx_phy_instance *instance)
+static void u3_phy_instance_init(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
 {
 	struct u3phy_banks *u3_banks = &instance->u3_banks;
 	u32 tmp;
@@ -319,11 +426,11 @@ static void u3_phy_instance_init(struct mt65xx_u3phy *u3phy,
 	tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
 	writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
 
-	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, instance->index);
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
 }
 
-static void phy_instance_init(struct mt65xx_u3phy *u3phy,
-	struct mt65xx_phy_instance *instance)
+static void u2_phy_instance_init(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
 {
 	struct u2phy_banks *u2_banks = &instance->u2_banks;
 	void __iomem *com = u2_banks->com;
@@ -355,7 +462,7 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy,
 		writel(tmp, com + U3P_U2PHYACR4);
 	}
 
-	if (u3phy->pdata->avoid_rx_sen_degradation) {
+	if (tphy->pdata->avoid_rx_sen_degradation) {
 		if (!index) {
 			tmp = readl(com + U3P_USBPHYACR2);
 			tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
@@ -381,11 +488,11 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy,
 	tmp |= PA6_RG_U2_SQTH_VAL(2);
 	writel(tmp, com + U3P_USBPHYACR6);
 
-	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
 }
 
-static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
-	struct mt65xx_phy_instance *instance)
+static void u2_phy_instance_power_on(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
 {
 	struct u2phy_banks *u2_banks = &instance->u2_banks;
 	void __iomem *com = u2_banks->com;
@@ -408,7 +515,7 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
 	tmp &= ~P2C_RG_SESSEND;
 	writel(tmp, com + U3P_U2PHYDTM1);
 
-	if (u3phy->pdata->avoid_rx_sen_degradation && index) {
+	if (tphy->pdata->avoid_rx_sen_degradation && index) {
 		tmp = readl(com + U3D_U2PHYDCR0);
 		tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
 		writel(tmp, com + U3D_U2PHYDCR0);
@@ -417,11 +524,11 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
 		tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
 		writel(tmp, com + U3P_U2PHYDTM0);
 	}
-	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
 }
 
-static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
-	struct mt65xx_phy_instance *instance)
+static void u2_phy_instance_power_off(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
 {
 	struct u2phy_banks *u2_banks = &instance->u2_banks;
 	void __iomem *com = u2_banks->com;
@@ -449,24 +556,24 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
 	tmp |= P2C_RG_SESSEND;
 	writel(tmp, com + U3P_U2PHYDTM1);
 
-	if (u3phy->pdata->avoid_rx_sen_degradation && index) {
+	if (tphy->pdata->avoid_rx_sen_degradation && index) {
 		tmp = readl(com + U3D_U2PHYDCR0);
 		tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
 		writel(tmp, com + U3D_U2PHYDCR0);
 	}
 
-	dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
 }
 
-static void phy_instance_exit(struct mt65xx_u3phy *u3phy,
-	struct mt65xx_phy_instance *instance)
+static void u2_phy_instance_exit(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
 {
 	struct u2phy_banks *u2_banks = &instance->u2_banks;
 	void __iomem *com = u2_banks->com;
 	u32 index = instance->index;
 	u32 tmp;
 
-	if (u3phy->pdata->avoid_rx_sen_degradation && index) {
+	if (tphy->pdata->avoid_rx_sen_degradation && index) {
 		tmp = readl(com + U3D_U2PHYDCR0);
 		tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
 		writel(tmp, com + U3D_U2PHYDCR0);
@@ -477,109 +584,307 @@ static void phy_instance_exit(struct mt65xx_u3phy *u3phy,
 	}
 }
 
-static void phy_v1_banks_init(struct mt65xx_u3phy *u3phy,
-			      struct mt65xx_phy_instance *instance)
+static void pcie_phy_instance_init(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+	u32 tmp;
+
+	if (tphy->pdata->version != MTK_PHY_V1)
+		return;
+
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+	tmp &= ~(P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H);
+	tmp |= P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+
+	/* ref clk drive */
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG1);
+	tmp &= ~P3A_RG_CLKDRV_AMP;
+	tmp |= P3A_RG_CLKDRV_AMP_VAL(0x4);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG1);
+
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+	tmp &= ~P3A_RG_CLKDRV_OFF;
+	tmp |= P3A_RG_CLKDRV_OFF_VAL(0x1);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0);
+
+	/* SSC delta -5000ppm */
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+	tmp &= ~P3A_RG_PLL_DELTA1_PE2H;
+	tmp |= P3A_RG_PLL_DELTA1_PE2H_VAL(0x3c);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+	tmp &= ~P3A_RG_PLL_DELTA_PE2H;
+	tmp |= P3A_RG_PLL_DELTA_PE2H_VAL(0x36);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+
+	/* change pll BW 0.6M */
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+	tmp &= ~(P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H);
+	tmp |= P3A_RG_PLL_BR_PE2H_VAL(0x1) | P3A_RG_PLL_IC_PE2H_VAL(0x1);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+	tmp &= ~(P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H);
+	tmp |= P3A_RG_PLL_BC_PE2H_VAL(0x3);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+	tmp &= ~P3A_RG_PLL_IR_PE2H;
+	tmp |= P3A_RG_PLL_IR_PE2H_VAL(0x2);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+
+	tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+	tmp &= ~P3A_RG_PLL_BP_PE2H;
+	tmp |= P3A_RG_PLL_BP_PE2H_VAL(0xa);
+	writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+
+	/* Tx Detect Rx Timing: 10us -> 5us */
+	tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+	tmp &= ~P3D_RG_RXDET_STB2_SET;
+	tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
+	writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+
+	tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+	tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
+	tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
+	writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+
+	/* wait for PCIe subsys register to active */
+	usleep_range(2500, 3000);
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u3phy_banks *bank = &instance->u3_banks;
+	u32 tmp;
+
+	tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+	tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN |
+		P3C_REG_IP_SW_RST);
+	writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+	tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+	tmp &= ~(P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
+	writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
+static void pcie_phy_instance_power_off(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+
+{
+	struct u3phy_banks *bank = &instance->u3_banks;
+	u32 tmp;
+
+	tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+	tmp |= P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST;
+	writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+	tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+	tmp |= P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD;
+	writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
+static void sata_phy_instance_init(struct mtk_tphy *tphy,
+	struct mtk_phy_instance *instance)
+{
+	struct u3phy_banks *u3_banks = &instance->u3_banks;
+	void __iomem *phyd = u3_banks->phyd;
+	u32 tmp;
+
+	/* charge current adjustment */
+	tmp = readl(phyd + ANA_RG_CTRL_SIGNAL6);
+	tmp &= ~(RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK);
+	tmp |= RG_CDR_BIRLTR_GEN1_VAL(0x6) | RG_CDR_BC_GEN1_VAL(0x1a);
+	writel(tmp, phyd + ANA_RG_CTRL_SIGNAL6);
+
+	tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
+	tmp &= ~RG_CDR_BIRLTD0_GEN1_MSK;
+	tmp |= RG_CDR_BIRLTD0_GEN1_VAL(0x18);
+	writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
+
+	tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
+	tmp &= ~RG_CDR_BIRLTD0_GEN3_MSK;
+	tmp |= RG_CDR_BIRLTD0_GEN3_VAL(0x06);
+	writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
+
+	tmp = readl(phyd + ANA_RG_CTRL_SIGNAL4);
+	tmp &= ~(RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK);
+	tmp |= RG_CDR_BICLTR_GEN1_VAL(0x0c) | RG_CDR_BR_GEN2_VAL(0x07);
+	writel(tmp, phyd + ANA_RG_CTRL_SIGNAL4);
+
+	tmp = readl(phyd + PHYD_CTRL_SIGNAL_MODE4);
+	tmp &= ~(RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK);
+	tmp |= RG_CDR_BICLTD0_GEN1_VAL(0x08) | RG_CDR_BICLTD1_GEN1_VAL(0x02);
+	writel(tmp, phyd + PHYD_CTRL_SIGNAL_MODE4);
+
+	tmp = readl(phyd + PHYD_DESIGN_OPTION2);
+	tmp &= ~RG_LOCK_CNT_SEL_MSK;
+	tmp |= RG_LOCK_CNT_SEL_VAL(0x02);
+	writel(tmp, phyd + PHYD_DESIGN_OPTION2);
+
+	tmp = readl(phyd + PHYD_DESIGN_OPTION9);
+	tmp &= ~(RG_T2_MIN_MSK | RG_TG_MIN_MSK |
+		 RG_T2_MAX_MSK | RG_TG_MAX_MSK);
+	tmp |= RG_T2_MIN_VAL(0x12) | RG_TG_MIN_VAL(0x04) |
+	       RG_T2_MAX_VAL(0x31) | RG_TG_MAX_VAL(0x0e);
+	writel(tmp, phyd + PHYD_DESIGN_OPTION9);
+
+	tmp = readl(phyd + ANA_RG_CTRL_SIGNAL1);
+	tmp &= ~RG_IDRV_0DB_GEN1_MSK;
+	tmp |= RG_IDRV_0DB_GEN1_VAL(0x20);
+	writel(tmp, phyd + ANA_RG_CTRL_SIGNAL1);
+
+	tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
+	tmp &= ~RG_EQ_DLEQ_LFI_GEN1_MSK;
+	tmp |= RG_EQ_DLEQ_LFI_GEN1_VAL(0x03);
+	writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
+
+	dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void phy_v1_banks_init(struct mtk_tphy *tphy,
+			      struct mtk_phy_instance *instance)
 {
 	struct u2phy_banks *u2_banks = &instance->u2_banks;
 	struct u3phy_banks *u3_banks = &instance->u3_banks;
 
-	if (instance->type == PHY_TYPE_USB2) {
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
 		u2_banks->misc = NULL;
-		u2_banks->fmreg = u3phy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
+		u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
 		u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
-	} else if (instance->type == PHY_TYPE_USB3) {
-		u3_banks->spllc = u3phy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
 		u3_banks->chip = NULL;
 		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
 		u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
+		break;
+	case PHY_TYPE_SATA:
+		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+		break;
+	default:
+		dev_err(tphy->dev, "incompatible PHY type\n");
+		return;
 	}
 }
 
-static void phy_v2_banks_init(struct mt65xx_u3phy *u3phy,
-			      struct mt65xx_phy_instance *instance)
+static void phy_v2_banks_init(struct mtk_tphy *tphy,
+			      struct mtk_phy_instance *instance)
 {
 	struct u2phy_banks *u2_banks = &instance->u2_banks;
 	struct u3phy_banks *u3_banks = &instance->u3_banks;
 
-	if (instance->type == PHY_TYPE_USB2) {
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
 		u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
 		u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
 		u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
-	} else if (instance->type == PHY_TYPE_USB3) {
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
 		u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
 		u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
 		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
 		u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
+		break;
+	default:
+		dev_err(tphy->dev, "incompatible PHY type\n");
+		return;
 	}
 }
 
-static int mt65xx_phy_init(struct phy *phy)
+static int mtk_phy_init(struct phy *phy)
 {
-	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
-	struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
 	int ret;
 
-	ret = clk_prepare_enable(u3phy->u3phya_ref);
+	ret = clk_prepare_enable(tphy->u3phya_ref);
 	if (ret) {
-		dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
+		dev_err(tphy->dev, "failed to enable u3phya_ref\n");
 		return ret;
 	}
 
 	ret = clk_prepare_enable(instance->ref_clk);
 	if (ret) {
-		dev_err(u3phy->dev, "failed to enable ref_clk\n");
+		dev_err(tphy->dev, "failed to enable ref_clk\n");
 		return ret;
 	}
 
-	if (instance->type == PHY_TYPE_USB2)
-		phy_instance_init(u3phy, instance);
-	else
-		u3_phy_instance_init(u3phy, instance);
+	switch (instance->type) {
+	case PHY_TYPE_USB2:
+		u2_phy_instance_init(tphy, instance);
+		break;
+	case PHY_TYPE_USB3:
+		u3_phy_instance_init(tphy, instance);
+		break;
+	case PHY_TYPE_PCIE:
+		pcie_phy_instance_init(tphy, instance);
+		break;
+	case PHY_TYPE_SATA:
+		sata_phy_instance_init(tphy, instance);
+		break;
+	default:
+		dev_err(tphy->dev, "incompatible PHY type\n");
+		return -EINVAL;
+	}
 
 	return 0;
 }
 
-static int mt65xx_phy_power_on(struct phy *phy)
+static int mtk_phy_power_on(struct phy *phy)
 {
-	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
-	struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
 
 	if (instance->type == PHY_TYPE_USB2) {
-		phy_instance_power_on(u3phy, instance);
-		hs_slew_rate_calibrate(u3phy, instance);
+		u2_phy_instance_power_on(tphy, instance);
+		hs_slew_rate_calibrate(tphy, instance);
+	} else if (instance->type == PHY_TYPE_PCIE) {
+		pcie_phy_instance_power_on(tphy, instance);
 	}
+
 	return 0;
 }
 
-static int mt65xx_phy_power_off(struct phy *phy)
+static int mtk_phy_power_off(struct phy *phy)
 {
-	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
-	struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
 
 	if (instance->type == PHY_TYPE_USB2)
-		phy_instance_power_off(u3phy, instance);
+		u2_phy_instance_power_off(tphy, instance);
+	else if (instance->type == PHY_TYPE_PCIE)
+		pcie_phy_instance_power_off(tphy, instance);
 
 	return 0;
 }
 
-static int mt65xx_phy_exit(struct phy *phy)
+static int mtk_phy_exit(struct phy *phy)
 {
-	struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
-	struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
 
 	if (instance->type == PHY_TYPE_USB2)
-		phy_instance_exit(u3phy, instance);
+		u2_phy_instance_exit(tphy, instance);
 
 	clk_disable_unprepare(instance->ref_clk);
-	clk_disable_unprepare(u3phy->u3phya_ref);
+	clk_disable_unprepare(tphy->u3phya_ref);
 	return 0;
 }
 
-static struct phy *mt65xx_phy_xlate(struct device *dev,
+static struct phy *mtk_phy_xlate(struct device *dev,
 					struct of_phandle_args *args)
 {
-	struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
-	struct mt65xx_phy_instance *instance = NULL;
+	struct mtk_tphy *tphy = dev_get_drvdata(dev);
+	struct mtk_phy_instance *instance = NULL;
 	struct device_node *phy_np = args->np;
 	int index;
 
@@ -588,9 +893,9 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
 		return ERR_PTR(-EINVAL);
 	}
 
-	for (index = 0; index < u3phy->nphys; index++)
-		if (phy_np == u3phy->phys[index]->phy->dev.of_node) {
-			instance = u3phy->phys[index];
+	for (index = 0; index < tphy->nphys; index++)
+		if (phy_np == tphy->phys[index]->phy->dev.of_node) {
+			instance = tphy->phys[index];
 			break;
 		}
 
@@ -601,15 +906,17 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
 
 	instance->type = args->args[0];
 	if (!(instance->type == PHY_TYPE_USB2 ||
-	      instance->type == PHY_TYPE_USB3)) {
+	      instance->type == PHY_TYPE_USB3 ||
+	      instance->type == PHY_TYPE_PCIE ||
+	      instance->type == PHY_TYPE_SATA)) {
 		dev_err(dev, "unsupported device type: %d\n", instance->type);
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (u3phy->pdata->version == MT_PHY_V1) {
-		phy_v1_banks_init(u3phy, instance);
-	} else if (u3phy->pdata->version == MT_PHY_V2) {
-		phy_v2_banks_init(u3phy, instance);
+	if (tphy->pdata->version == MTK_PHY_V1) {
+		phy_v1_banks_init(tphy, instance);
+	} else if (tphy->pdata->version == MTK_PHY_V2) {
+		phy_v2_banks_init(tphy, instance);
 	} else {
 		dev_err(dev, "phy version is not supported\n");
 		return ERR_PTR(-EINVAL);
@@ -618,38 +925,40 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
 	return instance->phy;
 }
 
-static const struct phy_ops mt65xx_u3phy_ops = {
-	.init		= mt65xx_phy_init,
-	.exit		= mt65xx_phy_exit,
-	.power_on	= mt65xx_phy_power_on,
-	.power_off	= mt65xx_phy_power_off,
+static const struct phy_ops mtk_tphy_ops = {
+	.init		= mtk_phy_init,
+	.exit		= mtk_phy_exit,
+	.power_on	= mtk_phy_power_on,
+	.power_off	= mtk_phy_power_off,
 	.owner		= THIS_MODULE,
 };
 
-static const struct mt65xx_phy_pdata mt2701_pdata = {
+static const struct mtk_phy_pdata tphy_v1_pdata = {
 	.avoid_rx_sen_degradation = false,
-	.version = MT_PHY_V1,
+	.version = MTK_PHY_V1,
 };
 
-static const struct mt65xx_phy_pdata mt2712_pdata = {
+static const struct mtk_phy_pdata tphy_v2_pdata = {
 	.avoid_rx_sen_degradation = false,
-	.version = MT_PHY_V2,
+	.version = MTK_PHY_V2,
 };
 
-static const struct mt65xx_phy_pdata mt8173_pdata = {
+static const struct mtk_phy_pdata mt8173_pdata = {
 	.avoid_rx_sen_degradation = true,
-	.version = MT_PHY_V1,
+	.version = MTK_PHY_V1,
 };
 
-static const struct of_device_id mt65xx_u3phy_id_table[] = {
-	{ .compatible = "mediatek,mt2701-u3phy", .data = &mt2701_pdata },
-	{ .compatible = "mediatek,mt2712-u3phy", .data = &mt2712_pdata },
+static const struct of_device_id mtk_tphy_id_table[] = {
+	{ .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
+	{ .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata },
 	{ .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
+	{ .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
+	{ .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
 	{ },
 };
-MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
+MODULE_DEVICE_TABLE(of, mtk_tphy_id_table);
 
-static int mt65xx_u3phy_probe(struct platform_device *pdev)
+static int mtk_tphy_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *match;
 	struct device *dev = &pdev->dev;
@@ -657,50 +966,50 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
 	struct device_node *child_np;
 	struct phy_provider *provider;
 	struct resource *sif_res;
-	struct mt65xx_u3phy *u3phy;
+	struct mtk_tphy *tphy;
 	struct resource res;
 	int port, retval;
 
-	match = of_match_node(mt65xx_u3phy_id_table, pdev->dev.of_node);
+	match = of_match_node(mtk_tphy_id_table, pdev->dev.of_node);
 	if (!match)
 		return -EINVAL;
 
-	u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
-	if (!u3phy)
+	tphy = devm_kzalloc(dev, sizeof(*tphy), GFP_KERNEL);
+	if (!tphy)
 		return -ENOMEM;
 
-	u3phy->pdata = match->data;
-	u3phy->nphys = of_get_child_count(np);
-	u3phy->phys = devm_kcalloc(dev, u3phy->nphys,
-				       sizeof(*u3phy->phys), GFP_KERNEL);
-	if (!u3phy->phys)
+	tphy->pdata = match->data;
+	tphy->nphys = of_get_child_count(np);
+	tphy->phys = devm_kcalloc(dev, tphy->nphys,
+				       sizeof(*tphy->phys), GFP_KERNEL);
+	if (!tphy->phys)
 		return -ENOMEM;
 
-	u3phy->dev = dev;
-	platform_set_drvdata(pdev, u3phy);
+	tphy->dev = dev;
+	platform_set_drvdata(pdev, tphy);
 
-	if (u3phy->pdata->version == MT_PHY_V1) {
+	if (tphy->pdata->version == MTK_PHY_V1) {
 		/* get banks shared by multiple phys */
 		sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
-		if (IS_ERR(u3phy->sif_base)) {
+		tphy->sif_base = devm_ioremap_resource(dev, sif_res);
+		if (IS_ERR(tphy->sif_base)) {
 			dev_err(dev, "failed to remap sif regs\n");
-			return PTR_ERR(u3phy->sif_base);
+			return PTR_ERR(tphy->sif_base);
 		}
 	}
 
 	/* it's deprecated, make it optional for backward compatibility */
-	u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
-	if (IS_ERR(u3phy->u3phya_ref)) {
-		if (PTR_ERR(u3phy->u3phya_ref) == -EPROBE_DEFER)
+	tphy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
+	if (IS_ERR(tphy->u3phya_ref)) {
+		if (PTR_ERR(tphy->u3phya_ref) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
 
-		u3phy->u3phya_ref = NULL;
+		tphy->u3phya_ref = NULL;
 	}
 
 	port = 0;
 	for_each_child_of_node(np, child_np) {
-		struct mt65xx_phy_instance *instance;
+		struct mtk_phy_instance *instance;
 		struct phy *phy;
 
 		instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
@@ -709,9 +1018,9 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
 			goto put_child;
 		}
 
-		u3phy->phys[port] = instance;
+		tphy->phys[port] = instance;
 
-		phy = devm_phy_create(dev, child_np, &mt65xx_u3phy_ops);
+		phy = devm_phy_create(dev, child_np, &mtk_tphy_ops);
 		if (IS_ERR(phy)) {
 			dev_err(dev, "failed to create phy\n");
 			retval = PTR_ERR(phy);
@@ -738,7 +1047,7 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
 		port++;
 
 		/* if deprecated clock is provided, ignore instance's one */
-		if (u3phy->u3phya_ref)
+		if (tphy->u3phya_ref)
 			continue;
 
 		instance->ref_clk = devm_clk_get(&phy->dev, "ref");
@@ -749,7 +1058,7 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
 		}
 	}
 
-	provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate);
+	provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
 
 	return PTR_ERR_OR_ZERO(provider);
 put_child:
@@ -757,16 +1066,16 @@ put_child:
 	return retval;
 }
 
-static struct platform_driver mt65xx_u3phy_driver = {
-	.probe		= mt65xx_u3phy_probe,
+static struct platform_driver mtk_tphy_driver = {
+	.probe		= mtk_tphy_probe,
 	.driver		= {
-		.name	= "mt65xx-u3phy",
-		.of_match_table = mt65xx_u3phy_id_table,
+		.name	= "mtk-tphy",
+		.of_match_table = mtk_tphy_id_table,
 	},
 };
 
-module_platform_driver(mt65xx_u3phy_driver);
+module_platform_driver(mtk_tphy_driver);
 
 MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
-MODULE_DESCRIPTION("mt65xx USB PHY driver");
+MODULE_DESCRIPTION("MediaTek T-PHY driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
index 9b63efa5ae4d..accaaaccb662 100644
--- a/drivers/phy/motorola/phy-cpcap-usb.c
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -506,7 +506,7 @@ static void cpcap_usb_init_optional_gpios(struct cpcap_phy_ddata *ddata)
 		if (IS_ERR(ddata->gpio[i])) {
 			dev_info(ddata->dev, "no mode change GPIO%i: %li\n",
 				 i, PTR_ERR(ddata->gpio[i]));
-				 ddata->gpio[i] = NULL;
+			ddata->gpio[i] = NULL;
 		}
 	}
 }
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 78ca62897784..e17f0351ccc2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -59,6 +59,7 @@
 #define QSERDES_COM_PLL_RCTRL_MODE1			0x088
 #define QSERDES_COM_PLL_CCTRL_MODE0			0x090
 #define QSERDES_COM_PLL_CCTRL_MODE1			0x094
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM			0x0a8
 #define QSERDES_COM_SYSCLK_EN_SEL			0x0ac
 #define QSERDES_COM_RESETSM_CNTRL			0x0b4
 #define QSERDES_COM_RESTRIM_CTRL			0x0bc
@@ -143,6 +144,11 @@
 #define QPHY_LOCK_DETECT_CONFIG3			0x88
 #define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK		0xa0
 #define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK			0xa4
+#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB		0x1A8
+#define QPHY_OSC_DTCT_ACTIONS				0x1AC
+#define QPHY_RX_SIGDET_LVL				0x1D8
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB		0x1DC
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB		0x1E0
 
 /* QPHY_SW_RESET bit */
 #define SW_RESET				BIT(0)
@@ -382,6 +388,85 @@ static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
 };
 
+static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
+	QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
+	QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
+	QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
+	QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
+	QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
+	QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
+	QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
+	QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
+	QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
+};
+
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
 	/* phy-type - PCIE/UFS/USB */
@@ -580,6 +665,42 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.mask_pcs_ready		= PHYSTATUS,
 };
 
+/* list of resets */
+static const char * const ipq8074_pciephy_reset_l[] = {
+	"phy", "common",
+};
+
+static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
+	.type			= PHY_TYPE_PCIE,
+	.nlanes			= 1,
+
+	.serdes_tbl		= ipq8074_pcie_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
+	.tx_tbl			= ipq8074_pcie_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(ipq8074_pcie_tx_tbl),
+	.rx_tbl			= ipq8074_pcie_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(ipq8074_pcie_rx_tbl),
+	.pcs_tbl		= ipq8074_pcie_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
+	.clk_list		= NULL,
+	.num_clks		= 0,
+	.reset_list		= ipq8074_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(ipq8074_pciephy_reset_l),
+	.vreg_list		= NULL,
+	.num_vregs		= 0,
+	.regs			= pciephy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.mask_pcs_ready		= PHYSTATUS,
+
+	.has_phy_com_ctrl	= false,
+	.has_lane_rst		= false,
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= 995,		/* us */
+	.pwrdn_delay_max	= 1005,		/* us */
+};
+
 static void qcom_qmp_phy_configure(void __iomem *base,
 				   const unsigned int *regs,
 				   const struct qmp_phy_init_tbl tbl[],
@@ -654,8 +775,6 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		if (ret) {
 			dev_err(qmp->dev, "%s reset deassert failed\n",
 				qmp->cfg->reset_list[i]);
-			while (--i >= 0)
-				reset_control_assert(qmp->resets[i]);
 			goto err_rst;
 		}
 	}
@@ -684,7 +803,7 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		if (ret) {
 			dev_err(qmp->dev,
 				"phy common block init timed-out\n");
-			goto err_com_init;
+			goto err_rst;
 		}
 	}
 
@@ -692,11 +811,11 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 
 	return 0;
 
-err_com_init:
+err_rst:
 	while (--i >= 0)
 		reset_control_assert(qmp->resets[i]);
-err_rst:
 	mutex_unlock(&qmp->phy_mutex);
+
 	return ret;
 }
 
@@ -749,14 +868,13 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		if (ret) {
 			dev_err(qmp->dev, "failed to enable %s clk, err=%d\n",
 				qmp->cfg->clk_list[i], ret);
-			while (--i >= 0)
-				clk_disable_unprepare(qmp->clks[i]);
+			goto err_clk;
 		}
 	}
 
 	ret = qcom_qmp_phy_com_init(qmp);
 	if (ret)
-		goto err_com_init;
+		goto err_clk;
 
 	if (cfg->has_lane_rst) {
 		ret = reset_control_deassert(qphy->lane_rst);
@@ -804,7 +922,7 @@ err_pcs_ready:
 		reset_control_assert(qphy->lane_rst);
 err_lane_rst:
 	qcom_qmp_phy_com_exit(qmp);
-err_com_init:
+err_clk:
 	while (--i >= 0)
 		clk_disable_unprepare(qmp->clks[i]);
 
@@ -925,29 +1043,28 @@ static int qcom_qmp_phy_clk_init(struct device *dev)
  *    clk  |   +-------+   |                   +-----+
  *         +---------------+
  */
-static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id)
+static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 {
-	char name[24];
 	struct clk_fixed_rate *fixed;
 	struct clk_init_data init = { };
+	int ret;
 
-	switch (qmp->cfg->type) {
-	case PHY_TYPE_USB3:
-		snprintf(name, sizeof(name), "usb3_phy_pipe_clk_src");
-		break;
-	case PHY_TYPE_PCIE:
-		snprintf(name, sizeof(name), "pcie_%d_pipe_clk_src", id);
-		break;
-	default:
+	if ((qmp->cfg->type != PHY_TYPE_USB3) &&
+	    (qmp->cfg->type != PHY_TYPE_PCIE)) {
 		/* not all phys register pipe clocks, so return success */
 		return 0;
 	}
 
+	ret = of_property_read_string(np, "clock-output-names", &init.name);
+	if (ret) {
+		dev_err(qmp->dev, "%s: No clock-output-names\n", np->name);
+		return ret;
+	}
+
 	fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
 	if (!fixed)
 		return -ENOMEM;
 
-	init.name = name;
 	init.ops = &clk_fixed_rate_ops;
 
 	/* controllers using QMP phys use 125MHz pipe clock interface */
@@ -1049,6 +1166,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,ipq8074-qmp-pcie-phy",
+		.data = &ipq8074_pciephy_cfg,
 	},
 	{ },
 };
@@ -1122,7 +1242,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 		 * Register the pipe clock provided by phy.
 		 * See function description to see details of this pipe clock.
 		 */
-		ret = phy_pipe_clk_register(qmp, id);
+		ret = phy_pipe_clk_register(qmp, child);
 		if (ret) {
 			dev_err(qmp->dev,
 				"failed to register pipe clock source\n");
diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig
new file mode 100644
index 000000000000..b17635b407bc
--- /dev/null
+++ b/drivers/phy/ralink/Kconfig
@@ -0,0 +1,11 @@
+#
+# PHY drivers for Ralink platforms.
+#
+config PHY_RALINK_USB
+	tristate "Ralink USB PHY driver"
+	depends on RALINK || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  This option enables support for the Ralink USB PHY found inside
+	  RT3352, MT7620, MT7628 and MT7688.
diff --git a/drivers/phy/ralink/Makefile b/drivers/phy/ralink/Makefile
new file mode 100644
index 000000000000..5c9e326e8757
--- /dev/null
+++ b/drivers/phy/ralink/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PHY_RALINK_USB)	+= phy-ralink-usb.o
diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c
new file mode 100644
index 000000000000..d19088c0ce5c
--- /dev/null
+++ b/drivers/phy/ralink/phy-ralink-usb.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2017 John Crispin <john@phrozen.org>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define RT_SYSC_REG_SYSCFG1		0x014
+#define RT_SYSC_REG_CLKCFG1		0x030
+#define RT_SYSC_REG_USB_PHY_CFG		0x05c
+
+#define OFS_U2_PHY_AC0			0x800
+#define OFS_U2_PHY_AC1			0x804
+#define OFS_U2_PHY_AC2			0x808
+#define OFS_U2_PHY_ACR0			0x810
+#define OFS_U2_PHY_ACR1			0x814
+#define OFS_U2_PHY_ACR2			0x818
+#define OFS_U2_PHY_ACR3			0x81C
+#define OFS_U2_PHY_ACR4			0x820
+#define OFS_U2_PHY_AMON0		0x824
+#define OFS_U2_PHY_DCR0			0x860
+#define OFS_U2_PHY_DCR1			0x864
+#define OFS_U2_PHY_DTM0			0x868
+#define OFS_U2_PHY_DTM1			0x86C
+
+#define RT_RSTCTRL_UDEV			BIT(25)
+#define RT_RSTCTRL_UHST			BIT(22)
+#define RT_SYSCFG1_USB0_HOST_MODE	BIT(10)
+
+#define MT7620_CLKCFG1_UPHY0_CLK_EN	BIT(25)
+#define MT7620_CLKCFG1_UPHY1_CLK_EN	BIT(22)
+#define RT_CLKCFG1_UPHY1_CLK_EN		BIT(20)
+#define RT_CLKCFG1_UPHY0_CLK_EN		BIT(18)
+
+#define USB_PHY_UTMI_8B60M		BIT(1)
+#define UDEV_WAKEUP			BIT(0)
+
+struct ralink_usb_phy {
+	struct reset_control	*rstdev;
+	struct reset_control	*rsthost;
+	u32			clk;
+	struct phy		*phy;
+	void __iomem		*base;
+	struct regmap		*sysctl;
+};
+
+static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg)
+{
+	writel(val, phy->base + reg);
+}
+
+static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg)
+{
+	return readl(phy->base + reg);
+}
+
+static void ralink_usb_phy_init(struct ralink_usb_phy *phy)
+{
+	u2_phy_r32(phy, OFS_U2_PHY_AC2);
+	u2_phy_r32(phy, OFS_U2_PHY_ACR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+
+	u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0);
+	u2_phy_r32(phy, OFS_U2_PHY_DCR0);
+	u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0);
+	u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1);
+	u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3);
+	u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0);
+}
+
+static int ralink_usb_phy_power_on(struct phy *_phy)
+{
+	struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
+	u32 t;
+
+	/* enable the phy */
+	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
+			   phy->clk, phy->clk);
+
+	/* setup host mode */
+	regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1,
+			   RT_SYSCFG1_USB0_HOST_MODE,
+			   RT_SYSCFG1_USB0_HOST_MODE);
+
+	/* deassert the reset lines */
+	reset_control_deassert(phy->rsthost);
+	reset_control_deassert(phy->rstdev);
+
+	/*
+	 * The SDK kernel had a delay of 100ms. however on device
+	 * testing showed that 10ms is enough
+	 */
+	mdelay(10);
+
+	if (phy->base)
+		ralink_usb_phy_init(phy);
+
+	/* print some status info */
+	regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t);
+	dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
+		(t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
+	if (t & USB_PHY_UTMI_8B60M)
+		dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
+	else
+		dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
+
+	return 0;
+}
+
+static int ralink_usb_phy_power_off(struct phy *_phy)
+{
+	struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
+
+	/* disable the phy */
+	regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1,
+			   phy->clk, 0);
+
+	/* assert the reset lines */
+	reset_control_assert(phy->rstdev);
+	reset_control_assert(phy->rsthost);
+
+	return 0;
+}
+
+static struct phy_ops ralink_usb_phy_ops = {
+	.power_on	= ralink_usb_phy_power_on,
+	.power_off	= ralink_usb_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id ralink_usb_phy_of_match[] = {
+	{
+		.compatible = "ralink,rt3352-usbphy",
+		.data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN |
+				  RT_CLKCFG1_UPHY0_CLK_EN)
+	},
+	{
+		.compatible = "mediatek,mt7620-usbphy",
+		.data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN |
+				  MT7620_CLKCFG1_UPHY0_CLK_EN)
+	},
+	{
+		.compatible = "mediatek,mt7628-usbphy",
+		.data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN |
+				  MT7620_CLKCFG1_UPHY0_CLK_EN) },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
+
+static int ralink_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	const struct of_device_id *match;
+	struct ralink_usb_phy *phy;
+
+	match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->clk = (u32) match->data;
+	phy->base = NULL;
+
+	phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl");
+	if (IS_ERR(phy->sysctl)) {
+		dev_err(dev, "failed to get sysctl registers\n");
+		return PTR_ERR(phy->sysctl);
+	}
+
+	/* The MT7628 and MT7688 require extra setup of PHY registers. */
+	if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		phy->base = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(phy->base)) {
+			dev_err(dev, "failed to remap register memory\n");
+			return PTR_ERR(phy->base);
+		}
+	}
+
+	phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
+	if (IS_ERR(phy->rsthost)) {
+		dev_err(dev, "host reset is missing\n");
+		return PTR_ERR(phy->rsthost);
+	}
+
+	phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
+	if (IS_ERR(phy->rstdev)) {
+		dev_err(dev, "device reset is missing\n");
+		return PTR_ERR(phy->rstdev);
+	}
+
+	phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
+	if (IS_ERR(phy->phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(phy->phy);
+	}
+	phy_set_drvdata(phy->phy, phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver ralink_usb_phy_driver = {
+	.probe	= ralink_usb_phy_probe,
+	.driver = {
+		.of_match_table	= ralink_usb_phy_of_match,
+		.name  = "ralink-usb-phy",
+	}
+};
+module_platform_driver(ralink_usb_phy_driver);
+
+MODULE_DESCRIPTION("Ralink USB phy driver");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 626883d9d176..994cc1a08f50 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -172,6 +172,8 @@ struct rockchip_usb2phy_cfg {
  * @vbus_attached: otg device vbus status.
  * @bvalid_irq: IRQ number assigned for vbus valid rise detection.
  * @ls_irq: IRQ number assigned for linestate detection.
+ * @otg_mux_irq: IRQ number which multiplex otg-id/otg-bvalid/linestate
+ *		 irqs to one irq in otg-port.
  * @mutex: for register updating in sm_work.
  * @chg_work: charge detect work.
  * @otg_sm_work: OTG state machine work.
@@ -189,6 +191,7 @@ struct rockchip_usb2phy_port {
 	bool		vbus_attached;
 	int		bvalid_irq;
 	int		ls_irq;
+	int		otg_mux_irq;
 	struct mutex	mutex;
 	struct		delayed_work chg_work;
 	struct		delayed_work otg_sm_work;
@@ -202,6 +205,7 @@ struct rockchip_usb2phy_port {
 /**
  * struct rockchip_usb2phy: usb2.0 phy driver data.
  * @grf: General Register Files regmap.
+ * @usbgrf: USB General Register Files regmap.
  * @clk: clock struct of phy input clk.
  * @clk480m: clock struct of phy output clk.
  * @clk_hw: clock struct of phy output clk management.
@@ -216,6 +220,7 @@ struct rockchip_usb2phy_port {
 struct rockchip_usb2phy {
 	struct device	*dev;
 	struct regmap	*grf;
+	struct regmap	*usbgrf;
 	struct clk	*clk;
 	struct clk	*clk480m;
 	struct clk_hw	clk480m_hw;
@@ -227,7 +232,12 @@ struct rockchip_usb2phy {
 	struct rockchip_usb2phy_port	ports[USB2PHY_NUM_PORTS];
 };
 
-static inline int property_enable(struct rockchip_usb2phy *rphy,
+static inline struct regmap *get_reg_base(struct rockchip_usb2phy *rphy)
+{
+	return rphy->usbgrf == NULL ? rphy->grf : rphy->usbgrf;
+}
+
+static inline int property_enable(struct regmap *base,
 				  const struct usb2phy_reg *reg, bool en)
 {
 	unsigned int val, mask, tmp;
@@ -236,17 +246,17 @@ static inline int property_enable(struct rockchip_usb2phy *rphy,
 	mask = GENMASK(reg->bitend, reg->bitstart);
 	val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
 
-	return regmap_write(rphy->grf, reg->offset, val);
+	return regmap_write(base, reg->offset, val);
 }
 
-static inline bool property_enabled(struct rockchip_usb2phy *rphy,
+static inline bool property_enabled(struct regmap *base,
 				    const struct usb2phy_reg *reg)
 {
 	int ret;
 	unsigned int tmp, orig;
 	unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
 
-	ret = regmap_read(rphy->grf, reg->offset, &orig);
+	ret = regmap_read(base, reg->offset, &orig);
 	if (ret)
 		return false;
 
@@ -258,11 +268,12 @@ static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
 		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+	struct regmap *base = get_reg_base(rphy);
 	int ret;
 
 	/* turn on 480m clk output if it is off */
-	if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) {
-		ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true);
+	if (!property_enabled(base, &rphy->phy_cfg->clkout_ctl)) {
+		ret = property_enable(base, &rphy->phy_cfg->clkout_ctl, true);
 		if (ret)
 			return ret;
 
@@ -277,17 +288,19 @@ static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
 		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+	struct regmap *base = get_reg_base(rphy);
 
 	/* turn off 480m clk output */
-	property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
+	property_enable(base, &rphy->phy_cfg->clkout_ctl, false);
 }
 
 static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
 		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+	struct regmap *base = get_reg_base(rphy);
 
-	return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl);
+	return property_enabled(base, &rphy->phy_cfg->clkout_ctl);
 }
 
 static unsigned long
@@ -409,13 +422,13 @@ static int rockchip_usb2phy_init(struct phy *phy)
 		if (rport->mode != USB_DR_MODE_HOST &&
 		    rport->mode != USB_DR_MODE_UNKNOWN) {
 			/* clear bvalid status and enable bvalid detect irq */
-			ret = property_enable(rphy,
+			ret = property_enable(rphy->grf,
 					      &rport->port_cfg->bvalid_det_clr,
 					      true);
 			if (ret)
 				goto out;
 
-			ret = property_enable(rphy,
+			ret = property_enable(rphy->grf,
 					      &rport->port_cfg->bvalid_det_en,
 					      true);
 			if (ret)
@@ -429,11 +442,13 @@ static int rockchip_usb2phy_init(struct phy *phy)
 		}
 	} else if (rport->port_id == USB2PHY_PORT_HOST) {
 		/* clear linestate and enable linestate detect irq */
-		ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+		ret = property_enable(rphy->grf,
+				      &rport->port_cfg->ls_det_clr, true);
 		if (ret)
 			goto out;
 
-		ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+		ret = property_enable(rphy->grf,
+				      &rport->port_cfg->ls_det_en, true);
 		if (ret)
 			goto out;
 
@@ -449,6 +464,7 @@ static int rockchip_usb2phy_power_on(struct phy *phy)
 {
 	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
 	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	struct regmap *base = get_reg_base(rphy);
 	int ret;
 
 	dev_dbg(&rport->phy->dev, "port power on\n");
@@ -460,7 +476,7 @@ static int rockchip_usb2phy_power_on(struct phy *phy)
 	if (ret)
 		return ret;
 
-	ret = property_enable(rphy, &rport->port_cfg->phy_sus, false);
+	ret = property_enable(base, &rport->port_cfg->phy_sus, false);
 	if (ret)
 		return ret;
 
@@ -475,6 +491,7 @@ static int rockchip_usb2phy_power_off(struct phy *phy)
 {
 	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
 	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	struct regmap *base = get_reg_base(rphy);
 	int ret;
 
 	dev_dbg(&rport->phy->dev, "port power off\n");
@@ -482,7 +499,7 @@ static int rockchip_usb2phy_power_off(struct phy *phy)
 	if (rport->suspended)
 		return 0;
 
-	ret = property_enable(rphy, &rport->port_cfg->phy_sus, true);
+	ret = property_enable(base, &rport->port_cfg->phy_sus, true);
 	if (ret)
 		return ret;
 
@@ -526,11 +543,11 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
 	bool vbus_attach, sch_work, notify_charger;
 
 	if (rport->utmi_avalid)
-		vbus_attach =
-			property_enabled(rphy, &rport->port_cfg->utmi_avalid);
+		vbus_attach = property_enabled(rphy->grf,
+					       &rport->port_cfg->utmi_avalid);
 	else
-		vbus_attach =
-			property_enabled(rphy, &rport->port_cfg->utmi_bvalid);
+		vbus_attach = property_enabled(rphy->grf,
+					       &rport->port_cfg->utmi_bvalid);
 
 	sch_work = false;
 	notify_charger = false;
@@ -650,22 +667,28 @@ static const char *chg_to_string(enum power_supply_type chg_type)
 static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy,
 				    bool en)
 {
-	property_enable(rphy, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en);
-	property_enable(rphy, &rphy->phy_cfg->chg_det.idp_src_en, en);
+	struct regmap *base = get_reg_base(rphy);
+
+	property_enable(base, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en);
+	property_enable(base, &rphy->phy_cfg->chg_det.idp_src_en, en);
 }
 
 static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy,
 					    bool en)
 {
-	property_enable(rphy, &rphy->phy_cfg->chg_det.vdp_src_en, en);
-	property_enable(rphy, &rphy->phy_cfg->chg_det.idm_sink_en, en);
+	struct regmap *base = get_reg_base(rphy);
+
+	property_enable(base, &rphy->phy_cfg->chg_det.vdp_src_en, en);
+	property_enable(base, &rphy->phy_cfg->chg_det.idm_sink_en, en);
 }
 
 static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy,
 					      bool en)
 {
-	property_enable(rphy, &rphy->phy_cfg->chg_det.vdm_src_en, en);
-	property_enable(rphy, &rphy->phy_cfg->chg_det.idp_sink_en, en);
+	struct regmap *base = get_reg_base(rphy);
+
+	property_enable(base, &rphy->phy_cfg->chg_det.vdm_src_en, en);
+	property_enable(base, &rphy->phy_cfg->chg_det.idp_sink_en, en);
 }
 
 #define CHG_DCD_POLL_TIME	(100 * HZ / 1000)
@@ -677,6 +700,7 @@ static void rockchip_chg_detect_work(struct work_struct *work)
 	struct rockchip_usb2phy_port *rport =
 		container_of(work, struct rockchip_usb2phy_port, chg_work.work);
 	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	struct regmap *base = get_reg_base(rphy);
 	bool is_dcd, tmout, vout;
 	unsigned long delay;
 
@@ -687,7 +711,7 @@ static void rockchip_chg_detect_work(struct work_struct *work)
 		if (!rport->suspended)
 			rockchip_usb2phy_power_off(rport->phy);
 		/* put the controller in non-driving mode */
-		property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, false);
+		property_enable(base, &rphy->phy_cfg->chg_det.opmode, false);
 		/* Start DCD processing stage 1 */
 		rockchip_chg_enable_dcd(rphy, true);
 		rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
@@ -696,7 +720,8 @@ static void rockchip_chg_detect_work(struct work_struct *work)
 		break;
 	case USB_CHG_STATE_WAIT_FOR_DCD:
 		/* get data contact detection status */
-		is_dcd = property_enabled(rphy, &rphy->phy_cfg->chg_det.dp_det);
+		is_dcd = property_enabled(rphy->grf,
+					  &rphy->phy_cfg->chg_det.dp_det);
 		tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES;
 		/* stage 2 */
 		if (is_dcd || tmout) {
@@ -713,7 +738,8 @@ static void rockchip_chg_detect_work(struct work_struct *work)
 		}
 		break;
 	case USB_CHG_STATE_DCD_DONE:
-		vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.cp_det);
+		vout = property_enabled(rphy->grf,
+					&rphy->phy_cfg->chg_det.cp_det);
 		rockchip_chg_enable_primary_det(rphy, false);
 		if (vout) {
 			/* Voltage Source on DM, Probe on DP  */
@@ -734,7 +760,8 @@ static void rockchip_chg_detect_work(struct work_struct *work)
 		}
 		break;
 	case USB_CHG_STATE_PRIMARY_DONE:
-		vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.dcp_det);
+		vout = property_enabled(rphy->grf,
+					&rphy->phy_cfg->chg_det.dcp_det);
 		/* Turn off voltage source */
 		rockchip_chg_enable_secondary_det(rphy, false);
 		if (vout)
@@ -748,7 +775,7 @@ static void rockchip_chg_detect_work(struct work_struct *work)
 		/* fall through */
 	case USB_CHG_STATE_DETECTED:
 		/* put the controller in normal mode */
-		property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, true);
+		property_enable(base, &rphy->phy_cfg->chg_det.opmode, true);
 		rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
 		dev_info(&rport->phy->dev, "charger = %s\n",
 			 chg_to_string(rphy->chg_type));
@@ -790,8 +817,7 @@ static void rockchip_usb2phy_sm_work(struct work_struct *work)
 	if (ret < 0)
 		goto next_schedule;
 
-	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset,
-			  &uhd);
+	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, &uhd);
 	if (ret < 0)
 		goto next_schedule;
 
@@ -845,8 +871,8 @@ static void rockchip_usb2phy_sm_work(struct work_struct *work)
 		 * activate the linestate detection to get the next device
 		 * plug-in irq.
 		 */
-		property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
-		property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+		property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
+		property_enable(rphy->grf, &rport->port_cfg->ls_det_en, true);
 
 		/*
 		 * we don't need to rearm the delayed work when the phy port
@@ -869,14 +895,14 @@ static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
 	struct rockchip_usb2phy_port *rport = data;
 	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
 
-	if (!property_enabled(rphy, &rport->port_cfg->ls_det_st))
+	if (!property_enabled(rphy->grf, &rport->port_cfg->ls_det_st))
 		return IRQ_NONE;
 
 	mutex_lock(&rport->mutex);
 
 	/* disable linestate detect irq and clear its status */
-	property_enable(rphy, &rport->port_cfg->ls_det_en, false);
-	property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+	property_enable(rphy->grf, &rport->port_cfg->ls_det_en, false);
+	property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
 
 	mutex_unlock(&rport->mutex);
 
@@ -896,13 +922,13 @@ static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
 	struct rockchip_usb2phy_port *rport = data;
 	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
 
-	if (!property_enabled(rphy, &rport->port_cfg->bvalid_det_st))
+	if (!property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st))
 		return IRQ_NONE;
 
 	mutex_lock(&rport->mutex);
 
 	/* clear bvalid detect irq pending status */
-	property_enable(rphy, &rport->port_cfg->bvalid_det_clr, true);
+	property_enable(rphy->grf, &rport->port_cfg->bvalid_det_clr, true);
 
 	mutex_unlock(&rport->mutex);
 
@@ -911,6 +937,17 @@ static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+	if (property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st))
+		return rockchip_usb2phy_bvalid_irq(irq, data);
+	else
+		return IRQ_NONE;
+}
+
 static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
 					   struct rockchip_usb2phy_port *rport,
 					   struct device_node *child_np)
@@ -987,20 +1024,43 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
 	rport->utmi_avalid =
 		of_property_read_bool(child_np, "rockchip,utmi-avalid");
 
-	rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
-	if (rport->bvalid_irq < 0) {
-		dev_err(rphy->dev, "no vbus valid irq provided\n");
-		ret = rport->bvalid_irq;
-		goto out;
-	}
+	/*
+	 * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
+	 * interrupts muxed together, so probe the otg-mux interrupt first,
+	 * if not found, then look for the regular interrupts one by one.
+	 */
+	rport->otg_mux_irq = of_irq_get_byname(child_np, "otg-mux");
+	if (rport->otg_mux_irq > 0) {
+		ret = devm_request_threaded_irq(rphy->dev, rport->otg_mux_irq,
+						NULL,
+						rockchip_usb2phy_otg_mux_irq,
+						IRQF_ONESHOT,
+						"rockchip_usb2phy_otg",
+						rport);
+		if (ret) {
+			dev_err(rphy->dev,
+				"failed to request otg-mux irq handle\n");
+			goto out;
+		}
+	} else {
+		rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
+		if (rport->bvalid_irq < 0) {
+			dev_err(rphy->dev, "no vbus valid irq provided\n");
+			ret = rport->bvalid_irq;
+			goto out;
+		}
 
-	ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq, NULL,
-					rockchip_usb2phy_bvalid_irq,
-					IRQF_ONESHOT,
-					"rockchip_usb2phy_bvalid", rport);
-	if (ret) {
-		dev_err(rphy->dev, "failed to request otg-bvalid irq handle\n");
-		goto out;
+		ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq,
+						NULL,
+						rockchip_usb2phy_bvalid_irq,
+						IRQF_ONESHOT,
+						"rockchip_usb2phy_bvalid",
+						rport);
+		if (ret) {
+			dev_err(rphy->dev,
+				"failed to request otg-bvalid irq handle\n");
+			goto out;
+		}
 	}
 
 	if (!IS_ERR(rphy->edev)) {
@@ -1045,6 +1105,16 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 	if (IS_ERR(rphy->grf))
 		return PTR_ERR(rphy->grf);
 
+	if (of_device_is_compatible(np, "rockchip,rv1108-usb2phy")) {
+		rphy->usbgrf =
+			syscon_regmap_lookup_by_phandle(dev->of_node,
+							"rockchip,usbgrf");
+		if (IS_ERR(rphy->usbgrf))
+			return PTR_ERR(rphy->usbgrf);
+	} else {
+		rphy->usbgrf = NULL;
+	}
+
 	if (of_property_read_u32(np, "reg", &reg)) {
 		dev_err(dev, "the reg property is not assigned in %s node\n",
 			np->name);
@@ -1327,11 +1397,54 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
+	{
+		.reg = 0x100,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x108, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0100, 15, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0680, 3, 3, 0, 1 },
+				.bvalid_det_st	= { 0x0690, 3, 3, 0, 1 },
+				.bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
+				.ls_det_en	= { 0x0680, 2, 2, 0, 1 },
+				.ls_det_st	= { 0x0690, 2, 2, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 2, 2, 0, 1 },
+				.utmi_bvalid	= { 0x0804, 10, 10, 0, 1 },
+				.utmi_ls	= { 0x0804, 13, 12, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0104, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0680, 4, 4, 0, 1 },
+				.ls_det_st	= { 0x0690, 4, 4, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 4, 4, 0, 1 },
+				.utmi_ls	= { 0x0804, 9, 8, 0, 1 },
+				.utmi_hstdet	= { 0x0804, 7, 7, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0100, 3, 0, 5, 1 },
+			.cp_det		= { 0x0804, 1, 1, 0, 1 },
+			.dcp_det	= { 0x0804, 0, 0, 0, 1 },
+			.dp_det		= { 0x0804, 2, 2, 0, 1 },
+			.idm_sink_en	= { 0x0108, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0108, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0108, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0108, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0108, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0108, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index 7cfb0f8995de..4d2c57f21d76 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -622,12 +622,11 @@ static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
 	struct extcon_dev *edev = tcphy->extcon;
 	union extcon_property_value property;
 	unsigned int id;
-	bool dfp, ufp, dp;
+	bool ufp, dp;
 	u8 mode;
 	int ret;
 
 	ufp = extcon_get_state(edev, EXTCON_USB);
-	dfp = extcon_get_state(edev, EXTCON_USB_HOST);
 	dp = extcon_get_state(edev, EXTCON_DISP_DP);
 
 	mode = MODE_DFP_USB;
diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
index bb3279dbf88c..2dd6dd1f37a8 100644
--- a/drivers/phy/samsung/phy-exynos-dp-video.c
+++ b/drivers/phy/samsung/phy-exynos-dp-video.c
@@ -16,6 +16,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -78,7 +79,6 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev)
 {
 	struct exynos_dp_video_phy *state;
 	struct device *dev = &pdev->dev;
-	const struct of_device_id *match;
 	struct phy_provider *phy_provider;
 	struct phy *phy;
 
@@ -93,8 +93,7 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(state->regs);
 	}
 
-	match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node);
-	state->drvdata = match->data;
+	state->drvdata = of_device_get_match_data(dev);
 
 	phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops);
 	if (IS_ERR(phy)) {
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 7c41daa2c625..22c68f58b181 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
@@ -662,7 +663,6 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
 	struct exynos5_usbdrd_phy *phy_drd;
 	struct phy_provider *phy_provider;
 	struct resource *res;
-	const struct of_device_id *match;
 	const struct exynos5_usbdrd_phy_drvdata *drv_data;
 	struct regmap *reg_pmu;
 	u32 pmu_offset;
@@ -681,9 +681,10 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(phy_drd->reg_phy))
 		return PTR_ERR(phy_drd->reg_phy);
 
-	match = of_match_node(exynos5_usbdrd_phy_of_match, pdev->dev.of_node);
+	drv_data = of_device_get_match_data(dev);
+	if (!drv_data)
+		return -EINVAL;
 
-	drv_data = match->data;
 	phy_drd->drv_data = drv_data;
 
 	ret = exynos5_usbdrd_phy_clk_handle(phy_drd);
diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
index 1d22d93b552d..ea818866985a 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.c
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
@@ -142,7 +143,6 @@ MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match);
 
 static int samsung_usb2_phy_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *match;
 	const struct samsung_usb2_phy_config *cfg;
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
@@ -155,12 +155,9 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	match = of_match_node(samsung_usb2_phy_of_match, pdev->dev.of_node);
-	if (!match) {
-		dev_err(dev, "of_match_node() failed\n");
+	cfg = of_device_get_match_data(dev);
+	if (!cfg)
 		return -EINVAL;
-	}
-	cfg = match->data;
 
 	drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) +
 		cfg->num_phys * sizeof(struct samsung_usb2_phy_instance),
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index 9c84d32c6f60..0e564f32749f 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -118,12 +118,12 @@ static struct pipe3_dpll_map dpll_map_usb[] = {
 };
 
 static struct pipe3_dpll_map dpll_map_sata[] = {
-	{12000000, {1000, 7, 4, 6, 0} },	/* 12 MHz */
-	{16800000, {714, 7, 4, 6, 0} },		/* 16.8 MHz */
+	{12000000, {625, 4, 4, 6, 0} },	/* 12 MHz */
+	{16800000, {625, 6, 4, 7, 0} },		/* 16.8 MHz */
 	{19200000, {625, 7, 4, 6, 0} },		/* 19.2 MHz */
-	{20000000, {600, 7, 4, 6, 0} },		/* 20 MHz */
-	{26000000, {461, 7, 4, 6, 0} },		/* 26 MHz */
-	{38400000, {312, 7, 4, 6, 0} },		/* 38.4 MHz */
+	{20000000, {750, 9, 4, 6, 0} },		/* 20 MHz */
+	{26000000, {750, 12, 4, 6, 0} },	/* 26 MHz */
+	{38400000, {625, 15, 4, 6, 0} },	/* 38.4 MHz */
 	{ },					/* Terminator */
 };
 
diff --git a/drivers/phy/ti/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
index 2990b3965460..0e9013868188 100644
--- a/drivers/phy/ti/phy-twl4030-usb.c
+++ b/drivers/phy/ti/phy-twl4030-usb.c
@@ -185,7 +185,7 @@ struct twl4030_usb {
 static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
 		u8 module, u8 data, u8 address)
 {
-	u8 check;
+	u8 check = 0xFF;
 
 	if ((twl_i2c_write_u8(module, data, address) >= 0) &&
 	    (twl_i2c_read_u8(module, &check, address) >= 0) &&