Merge tag 'spi-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "This release is mainly a collection of driver specific updates,
  including a few nice cleanups to make drivers use more core features.

   - automatically use the parent device to allocate DMA buffers if
     there wasn't an explicitly configured device.

   - fixes for leaks on allocation.

   - a small piece of the start of SPI slave support, a feature that's
     been on the cards for over a decade!"

* tag 'spi-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (55 commits)
  spi: spi-ti-qspi: Fix error handling
  spi: spi-ti-qspi: Fix error handling
  spi: lantiq-ssc: activate under COMPILE_TEST
  spi: armada-3700: Remove spi_master_put in a3700_spi_remove()
  spi: ti-qspi: revise ti_qspi_probe() failure flow
  spi: spi-ep93xx: simplify GPIO chip selects
  spi: rspi: Replaces "n" by "len" in qspi_transfer_*()
  spi: rspi: Fixes bogus received byte in qspi_transfer_in()
  spi: bcm-qspi: Remove unnecessary platform_set_drvdata()
  spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance
  spi: lantiq-ssc: add support for Lantiq SSC SPI controller
  spi: s3c64xx: fix inconsistency between binding and driver
  spi: armada-3700: Remove .owner field for driver
  spi: bcm-qspi: Added mspi read fallback in bcm_qspi_flash_read()
  spi: fix device-node leaks
  spi: mediatek: Only do dma for 4-byte aligned buffers
  spi: When no dma_chan map buffers with spi_master's parent
  spi: pca2xx-pci: Allow MSI
  spi: pxa2xx: Prepare for edge-triggered interrupts
  spi: pxa2xx: Add support for Intel Gemini Lake
  ...

33 files changed, 1502 insertions, 615 deletions

diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
new file mode 100644
index 000000000000..6069b95a883d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -0,0 +1,29 @@
+Lantiq Synchronous Serial Controller (SSC) SPI master driver
+
+Required properties:
+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"
+- #address-cells: see spi-bus.txt
+- #size-cells: see spi-bus.txt
+- reg: address and length of the spi master registers
+- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.
+
+
+Optional properties:
+- clocks: spi clock phandle
+- num-cs: see spi-bus.txt, set to 8 if unset
+- base-cs: the number of the first chip select, set to 1 if unset.
+
+Example:
+
+
+spi: spi@E100800 {
+	compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
+	reg = <0xE100800 0x100>;
+	interrupt-parent = <&icu0>;
+	interrupts = <22 23 24>;
+	interrupt-names = "spi_rx", "spi_tx", "spi_err";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	num-cs = <6>;
+	base-cs = <1>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
index d2ca153614f9..83da4931d832 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -31,6 +31,10 @@ Optional Properties:
 - rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
 		Rx data (may need to be fine tuned for high capacitance lines).
 		No delay (0) by default.
+- pinctrl-names: Names for the pin configuration(s); may be "default" or
+		"sleep", where the "sleep" configuration may describe the state
+		the pins should be in during system suspend. See also
+		pinctrl/pinctrl-bindings.txt.
 
 
 Example:
@@ -46,4 +50,7 @@ Example:
 		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
 		clock-names = "spiclk", "apb_pclk";
+		pinctrl-0 = <&spi1_pins>;
+		pinctrl-1 = <&spi1_sleep>;
+		pinctrl-names = "default", "sleep";
 	};
diff --git a/Documentation/spi/ep93xx_spi b/Documentation/spi/ep93xx_spi
deleted file mode 100644
index 832ddce6e5fb..000000000000
--- a/Documentation/spi/ep93xx_spi
+++ /dev/null
@@ -1,105 +0,0 @@
-Cirrus EP93xx SPI controller driver HOWTO
-=========================================
-
-ep93xx_spi driver brings SPI master support for EP93xx SPI controller.  Chip
-selects are implemented with GPIO lines.
-
-NOTE: If possible, don't use SFRMOUT (SFRM1) signal as a chip select. It will
-not work correctly (it cannot be controlled by software). Use GPIO lines
-instead.
-
-Sample configuration
-====================
-
-Typically driver configuration is done in platform board files (the files under
-arch/arm/mach-ep93xx/*.c). In this example we configure MMC over SPI through
-this driver on TS-7260 board. You can adapt the code to suit your needs.
-
-This example uses EGPIO9 as SD/MMC card chip select (this is wired in DIO1
-header on the board).
-
-You need to select CONFIG_MMC_SPI to use mmc_spi driver.
-
-arch/arm/mach-ep93xx/ts72xx.c:
-
-...
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-
-#include <linux/platform_data/spi-ep93xx.h>
-
-/* this is our GPIO line used for chip select */
-#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9
-
-static int ts72xx_mmc_spi_setup(struct spi_device *spi)
-{
-	int err;
-
-	err = gpio_request(MMC_CHIP_SELECT_GPIO, spi->modalias);
-	if (err)
-		return err;
-
-	gpio_direction_output(MMC_CHIP_SELECT_GPIO, 1);
-
-	return 0;
-}
-
-static void ts72xx_mmc_spi_cleanup(struct spi_device *spi)
-{
-	gpio_set_value(MMC_CHIP_SELECT_GPIO, 1);
-	gpio_direction_input(MMC_CHIP_SELECT_GPIO);
-	gpio_free(MMC_CHIP_SELECT_GPIO);
-}
-
-static void ts72xx_mmc_spi_cs_control(struct spi_device *spi, int value)
-{
-	gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
-}
-
-static struct ep93xx_spi_chip_ops ts72xx_mmc_spi_ops = {
-	.setup		= ts72xx_mmc_spi_setup,
-	.cleanup	= ts72xx_mmc_spi_cleanup,
-	.cs_control	= ts72xx_mmc_spi_cs_control,
-};
-
-static struct spi_board_info ts72xx_spi_devices[] __initdata = {
-	{
-		.modalias		= "mmc_spi",
-		.controller_data	= &ts72xx_mmc_spi_ops,
-		/*
-		 * We use 10 MHz even though the maximum is 7.4 MHz. The driver
-		 * will limit it automatically to max. frequency.
-		 */
-		.max_speed_hz		= 10 * 1000 * 1000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_0,
-	},
-};
-
-static struct ep93xx_spi_info ts72xx_spi_info = {
-	.num_chipselect	= ARRAY_SIZE(ts72xx_spi_devices),
-};
-
-static void __init ts72xx_init_machine(void)
-{
-	...
-	ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
-			    ARRAY_SIZE(ts72xx_spi_devices));
-}
-
-The driver can use DMA for the transfers also. In this case ts72xx_spi_info
-becomes:
-
-static struct ep93xx_spi_info ts72xx_spi_info = {
-	.num_chipselect	= ARRAY_SIZE(ts72xx_spi_devices),
-	.use_dma	= true;
-};
-
-Note that CONFIG_EP93XX_DMA should be enabled as well.
-
-Thanks to
-=========
-Martin Guy, H. Hartley Sweeten and others who helped me during development of
-the driver. Simplemachines.it donated me a Sim.One board which I used testing
-the driver on EP9307.
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index ad92d9f7e4df..0ac176386789 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
@@ -106,33 +105,10 @@ static struct cs4271_platform_data edb93xx_cs4271_data = {
 	.gpio_nreset	= -EINVAL,	/* filled in later */
 };
 
-static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
-{
-	return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
-				GPIOF_OUT_INIT_HIGH, spi->modalias);
-}
-
-static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
-{
-	gpio_free(EP93XX_GPIO_LINE_EGPIO6);
-}
-
-static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
-{
-	gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
-}
-
-static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
-	.setup		= edb93xx_cs4271_hw_setup,
-	.cleanup	= edb93xx_cs4271_hw_cleanup,
-	.cs_control	= edb93xx_cs4271_hw_cs_control,
-};
-
 static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
 	{
 		.modalias		= "cs4271",
 		.platform_data		= &edb93xx_cs4271_data,
-		.controller_data	= &edb93xx_cs4271_hw,
 		.max_speed_hz		= 6000000,
 		.bus_num		= 0,
 		.chip_select		= 0,
@@ -140,8 +116,13 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
 	},
 };
 
+static int edb93xx_spi_chipselects[] __initdata = {
+	EP93XX_GPIO_LINE_EGPIO6,
+};
+
 static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
-	.num_chipselect	= ARRAY_SIZE(edb93xx_spi_board_info),
+	.chipselect	= edb93xx_spi_chipselects,
+	.num_chipselect	= ARRAY_SIZE(edb93xx_spi_chipselects),
 };
 
 static void __init edb93xx_register_spi(void)
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 7bb540c421ee..c7a40f245892 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -49,56 +49,6 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = {
 #define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
 
 /*
- * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
- * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
- * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
- */
-#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO1
-
-/*
- * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal,
- * you can leave these empty and pass NULL as .controller_data.
- */
-
-static int simone_mmc_spi_setup(struct spi_device *spi)
-{
-	unsigned int gpio = MMC_CHIP_SELECT_GPIO;
-	int err;
-
-	err = gpio_request(gpio, spi->modalias);
-	if (err)
-		return err;
-
-	err = gpio_direction_output(gpio, 1);
-	if (err) {
-		gpio_free(gpio);
-		return err;
-	}
-
-	return 0;
-}
-
-static void simone_mmc_spi_cleanup(struct spi_device *spi)
-{
-	unsigned int gpio = MMC_CHIP_SELECT_GPIO;
-
-	gpio_set_value(gpio, 1);
-	gpio_direction_input(gpio);
-	gpio_free(gpio);
-}
-
-static void simone_mmc_spi_cs_control(struct spi_device *spi, int value)
-{
-	gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
-}
-
-static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = {
-	.setup		= simone_mmc_spi_setup,
-	.cleanup	= simone_mmc_spi_cleanup,
-	.cs_control	= simone_mmc_spi_cs_control,
-};
-
-/*
  * MMC card detection GPIO setup.
  */
 
@@ -152,7 +102,6 @@ static struct mmc_spi_platform_data simone_mmc_spi_data = {
 static struct spi_board_info simone_spi_devices[] __initdata = {
 	{
 		.modalias		= "mmc_spi",
-		.controller_data	= &simone_mmc_spi_ops,
 		.platform_data		= &simone_mmc_spi_data,
 		/*
 		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
@@ -165,8 +114,18 @@ static struct spi_board_info simone_spi_devices[] __initdata = {
 	},
 };
 
+/*
+ * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
+ * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
+ * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
+ */
+static int simone_spi_chipselects[] __initdata = {
+	EP93XX_GPIO_LINE_EGPIO1,
+};
+
 static struct ep93xx_spi_info simone_spi_info __initdata = {
-	.num_chipselect	= ARRAY_SIZE(simone_spi_devices),
+	.chipselect	= simone_spi_chipselects,
+	.num_chipselect	= ARRAY_SIZE(simone_spi_chipselects),
 	.use_dma = 1,
 };
 
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 5cced5988498..1daf9441058c 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -175,33 +175,9 @@ static struct cs4271_platform_data vision_cs4271_data = {
 	.gpio_nreset	= EP93XX_GPIO_LINE_H(2),
 };
 
-static int vision_cs4271_hw_setup(struct spi_device *spi)
-{
-	return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
-				GPIOF_OUT_INIT_HIGH, spi->modalias);
-}
-
-static void vision_cs4271_hw_cleanup(struct spi_device *spi)
-{
-	gpio_free(EP93XX_GPIO_LINE_EGPIO6);
-}
-
-static void vision_cs4271_hw_cs_control(struct spi_device *spi, int value)
-{
-	gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
-}
-
-static struct ep93xx_spi_chip_ops vision_cs4271_hw = {
-	.setup		= vision_cs4271_hw_setup,
-	.cleanup	= vision_cs4271_hw_cleanup,
-	.cs_control	= vision_cs4271_hw_cs_control,
-};
-
 /*************************************************************************
  * SPI Flash
  *************************************************************************/
-#define VISION_SPI_FLASH_CS	EP93XX_GPIO_LINE_EGPIO7
-
 static struct mtd_partition vision_spi_flash_partitions[] = {
 	{
 		.name	= "SPI bootstrap",
@@ -224,68 +200,20 @@ static struct flash_platform_data vision_spi_flash_data = {
 	.nr_parts	= ARRAY_SIZE(vision_spi_flash_partitions),
 };
 
-static int vision_spi_flash_hw_setup(struct spi_device *spi)
-{
-	return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
-				spi->modalias);
-}
-
-static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
-{
-	gpio_free(VISION_SPI_FLASH_CS);
-}
-
-static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
-{
-	gpio_set_value(VISION_SPI_FLASH_CS, value);
-}
-
-static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
-	.setup		= vision_spi_flash_hw_setup,
-	.cleanup	= vision_spi_flash_hw_cleanup,
-	.cs_control	= vision_spi_flash_hw_cs_control,
-};
-
 /*************************************************************************
  * SPI SD/MMC host
  *************************************************************************/
-#define VISION_SPI_MMC_CS	EP93XX_GPIO_LINE_G(2)
-#define VISION_SPI_MMC_WP	EP93XX_GPIO_LINE_F(0)
-#define VISION_SPI_MMC_CD	EP93XX_GPIO_LINE_EGPIO15
-
 static struct mmc_spi_platform_data vision_spi_mmc_data = {
 	.detect_delay	= 100,
 	.powerup_msecs	= 100,
 	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.flags		= MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
-	.cd_gpio	= VISION_SPI_MMC_CD,
+	.cd_gpio	= EP93XX_GPIO_LINE_EGPIO15,
 	.cd_debounce	= 1,
-	.ro_gpio	= VISION_SPI_MMC_WP,
+	.ro_gpio	= EP93XX_GPIO_LINE_F(0),
 	.caps2		= MMC_CAP2_RO_ACTIVE_HIGH,
 };
 
-static int vision_spi_mmc_hw_setup(struct spi_device *spi)
-{
-	return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
-				spi->modalias);
-}
-
-static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
-{
-	gpio_free(VISION_SPI_MMC_CS);
-}
-
-static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
-{
-	gpio_set_value(VISION_SPI_MMC_CS, value);
-}
-
-static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
-	.setup		= vision_spi_mmc_hw_setup,
-	.cleanup	= vision_spi_mmc_hw_cleanup,
-	.cs_control	= vision_spi_mmc_hw_cs_control,
-};
-
 /*************************************************************************
  * SPI Bus
  *************************************************************************/
@@ -293,7 +221,6 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 	{
 		.modalias		= "cs4271",
 		.platform_data		= &vision_cs4271_data,
-		.controller_data	= &vision_cs4271_hw,
 		.max_speed_hz		= 6000000,
 		.bus_num		= 0,
 		.chip_select		= 0,
@@ -301,7 +228,6 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 	}, {
 		.modalias		= "sst25l",
 		.platform_data		= &vision_spi_flash_data,
-		.controller_data	= &vision_spi_flash_hw,
 		.max_speed_hz		= 20000000,
 		.bus_num		= 0,
 		.chip_select		= 1,
@@ -309,7 +235,6 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 	}, {
 		.modalias		= "mmc_spi",
 		.platform_data		= &vision_spi_mmc_data,
-		.controller_data	= &vision_spi_mmc_hw,
 		.max_speed_hz		= 20000000,
 		.bus_num		= 0,
 		.chip_select		= 2,
@@ -317,8 +242,15 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 	},
 };
 
+static int vision_spi_chipselects[] __initdata = {
+	EP93XX_GPIO_LINE_EGPIO6,
+	EP93XX_GPIO_LINE_EGPIO7,
+	EP93XX_GPIO_LINE_G(2),
+};
+
 static struct ep93xx_spi_info vision_spi_master __initdata = {
-	.num_chipselect	= ARRAY_SIZE(vision_spi_board_info),
+	.chipselect	= vision_spi_chipselects,
+	.num_chipselect	= ARRAY_SIZE(vision_spi_chipselects),
 	.use_dma	= 1,
 };
 
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2922a9908302..25ae7f2e44b5 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -162,7 +162,8 @@ config SPI_BCM63XX_HSSPI
 
 config SPI_BCM_QSPI
 	tristate "Broadcom BSPI and MSPI controller support"
-	depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || COMPILE_TEST
+	depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || \
+			BMIPS_GENERIC || COMPILE_TEST
 	default ARCH_BCM_IPROC
 	help
 	  Enables support for the Broadcom SPI flash and MSPI controller.
@@ -263,7 +264,7 @@ config SPI_EP93XX
 	  mode.
 
 config SPI_FALCON
-	tristate "Falcon SPI controller support"
+	bool "Falcon SPI controller support"
 	depends on SOC_FALCON
 	help
 	  The external bus unit (EBU) found on the FALC-ON SoC has SPI
@@ -416,6 +417,14 @@ config SPI_NUC900
 	help
 	  SPI driver for Nuvoton NUC900 series ARM SoCs
 
+config SPI_LANTIQ_SSC
+	tristate "Lantiq SSC SPI controller"
+	depends on LANTIQ || COMPILE_TEST
+	help
+	  This driver supports the Lantiq SSC SPI controller in master
+	  mode. This controller is found on Intel (former Lantiq) SoCs like
+	  the Danube, Falcon, xRX200, xRX300.
+
 config SPI_OC_TINY
 	tristate "OpenCores tiny SPI"
 	depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 7a6b64662c82..b375a7a89216 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_FSL_SPI)		+= spi-fsl-spi.o
 obj-$(CONFIG_SPI_GPIO)			+= spi-gpio.o
 obj-$(CONFIG_SPI_IMG_SPFI)		+= spi-img-spfi.o
 obj-$(CONFIG_SPI_IMX)			+= spi-imx.o
+obj-$(CONFIG_SPI_LANTIQ_SSC)		+= spi-lantiq-ssc.o
 obj-$(CONFIG_SPI_JCORE)			+= spi-jcore.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
 obj-$(CONFIG_SPI_LP8841_RTC)		+= spi-lp8841-rtc.o
diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c
index 0314c6b9e044..6c7d7a460689 100644
--- a/drivers/spi/spi-armada-3700.c
+++ b/drivers/spi/spi-armada-3700.c
@@ -170,12 +170,12 @@ static int a3700_spi_pin_mode_set(struct a3700_spi *a3700_spi,
 	val &= ~(A3700_SPI_DATA_PIN0 | A3700_SPI_DATA_PIN1);
 
 	switch (pin_mode) {
-	case 1:
+	case SPI_NBITS_SINGLE:
 		break;
-	case 2:
+	case SPI_NBITS_DUAL:
 		val |= A3700_SPI_DATA_PIN0;
 		break;
-	case 4:
+	case SPI_NBITS_QUAD:
 		val |= A3700_SPI_DATA_PIN1;
 		break;
 	default:
@@ -340,8 +340,7 @@ static irqreturn_t a3700_spi_interrupt(int irq, void *dev_id)
 	spireg_write(a3700_spi, A3700_SPI_INT_STAT_REG, cause);
 
 	/* Wake up the transfer */
-	if (a3700_spi->wait_mask & cause)
-		complete(&a3700_spi->done);
+	complete(&a3700_spi->done);
 
 	return IRQ_HANDLED;
 }
@@ -421,7 +420,7 @@ static void a3700_spi_fifo_thres_set(struct a3700_spi *a3700_spi,
 }
 
 static void a3700_spi_transfer_setup(struct spi_device *spi,
-				    struct spi_transfer *xfer)
+				     struct spi_transfer *xfer)
 {
 	struct a3700_spi *a3700_spi;
 	unsigned int byte_len;
@@ -562,6 +561,7 @@ static int a3700_spi_fifo_read(struct a3700_spi *a3700_spi)
 		val = spireg_read(a3700_spi, A3700_SPI_DATA_IN_REG);
 		if (a3700_spi->buf_len >= 4) {
 			u32 data = le32_to_cpu(val);
+
 			memcpy(a3700_spi->rx_buf, &data, 4);
 
 			a3700_spi->buf_len -= 4;
@@ -901,7 +901,6 @@ static int a3700_spi_remove(struct platform_device *pdev)
 	struct a3700_spi *spi = spi_master_get_devdata(master);
 
 	clk_unprepare(spi->clk);
-	spi_master_put(master);
 
 	return 0;
 }
@@ -909,7 +908,6 @@ static int a3700_spi_remove(struct platform_device *pdev)
 static struct platform_driver a3700_spi_driver = {
 	.driver = {
 		.name	= DRIVER_NAME,
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(a3700_spi_dt_ids),
 	},
 	.probe		= a3700_spi_probe,
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index f369174fbd88..b89cee11f418 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -78,14 +78,16 @@ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
 	}
 
-	if (spi->chip_select) {
+	if (gpio_is_valid(spi->cs_gpio)) {
 		/* SPI is normally active-low */
-		gpio_set_value(spi->cs_gpio, cs_high);
+		gpio_set_value_cansleep(spi->cs_gpio, cs_high);
 	} else {
+		u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
+
 		if (cs_high)
-			sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+			sp->ioc_base |= cs_bit;
 		else
-			sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+			sp->ioc_base &= ~cs_bit;
 
 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
 	}
@@ -118,11 +120,8 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
 	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
 	int status;
 
-	if (spi->chip_select && !gpio_is_valid(spi->cs_gpio))
-		return -EINVAL;
-
 	status = 0;
-	if (spi->chip_select) {
+	if (gpio_is_valid(spi->cs_gpio)) {
 		unsigned long flags;
 
 		flags = GPIOF_DIR_OUT;
@@ -134,10 +133,12 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
 		status = gpio_request_one(spi->cs_gpio, flags,
 					  dev_name(&spi->dev));
 	} else {
+		u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
+
 		if (spi->mode & SPI_CS_HIGH)
-			sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+			sp->ioc_base &= ~cs_bit;
 		else
-			sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+			sp->ioc_base |= cs_bit;
 
 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
 	}
@@ -147,7 +148,7 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
 
 static void ath79_spi_cleanup_cs(struct spi_device *spi)
 {
-	if (spi->chip_select) {
+	if (gpio_is_valid(spi->cs_gpio)) {
 		gpio_free(spi->cs_gpio);
 	}
 }
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index d7843fd8c610..b19722ba908c 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -89,7 +89,7 @@
 #define BSPI_BPP_MODE_SELECT_MASK		BIT(8)
 #define BSPI_BPP_ADDR_SELECT_MASK		BIT(16)
 
-#define BSPI_READ_LENGTH			256
+#define BSPI_READ_LENGTH			512
 
 /* MSPI register offsets */
 #define MSPI_SPCR0_LSB				0x000
@@ -192,9 +192,11 @@ struct bcm_qspi_dev_id {
 	void *dev;
 };
 
+
 struct qspi_trans {
 	struct spi_transfer *trans;
 	int byte;
+	bool mspi_last_trans;
 };
 
 struct bcm_qspi {
@@ -616,6 +618,16 @@ static int bcm_qspi_setup(struct spi_device *spi)
 	return 0;
 }
 
+static bool bcm_qspi_mspi_transfer_is_last(struct bcm_qspi *qspi,
+					   struct qspi_trans *qt)
+{
+	if (qt->mspi_last_trans &&
+	    spi_transfer_is_last(qspi->master, qt->trans))
+		return true;
+	else
+		return false;
+}
+
 static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
 					struct qspi_trans *qt, int flags)
 {
@@ -629,7 +641,6 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
 
 	if (qt->byte >= qt->trans->len) {
 		/* we're at the end of the spi_transfer */
-
 		/* in TX mode, need to pause for a delay or CS change */
 		if (qt->trans->delay_usecs &&
 		    (flags & TRANS_STATUS_BREAK_DELAY))
@@ -641,7 +652,7 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
 			goto done;
 
 		dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
-		if (spi_transfer_is_last(qspi->master, qt->trans))
+		if (bcm_qspi_mspi_transfer_is_last(qspi, qt))
 			ret = TRANS_STATUS_BREAK_EOM;
 		else
 			ret = TRANS_STATUS_BREAK_NO_BYTES;
@@ -813,7 +824,7 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
 				    struct spi_flash_read_message *msg)
 {
 	struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
-	u32 addr = 0, len, len_words;
+	u32 addr = 0, len, rdlen, len_words;
 	int ret = 0;
 	unsigned long timeo = msecs_to_jiffies(100);
 	struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
@@ -826,7 +837,7 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
 	bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
 
 	/*
-	 * when using flex mode mode we need to send
+	 * when using flex mode we need to send
 	 * the upper address byte to bspi
 	 */
 	if (bcm_qspi_bspi_ver_three(qspi) == false) {
@@ -840,48 +851,127 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
 	else
 		addr = msg->from & 0x00ffffff;
 
-	/* set BSPI RAF buffer max read length */
-	len = msg->len;
-	if (len > BSPI_READ_LENGTH)
-		len = BSPI_READ_LENGTH;
-
 	if (bcm_qspi_bspi_ver_three(qspi) == true)
 		addr = (addr + 0xc00000) & 0xffffff;
 
-	reinit_completion(&qspi->bspi_done);
-	bcm_qspi_enable_bspi(qspi);
-	len_words = (len + 3) >> 2;
-	qspi->bspi_rf_msg = msg;
-	qspi->bspi_rf_msg_status = 0;
+	/*
+	 * read into the entire buffer by breaking the reads
+	 * into RAF buffer read lengths
+	 */
+	len = msg->len;
 	qspi->bspi_rf_msg_idx = 0;
-	qspi->bspi_rf_msg_len = len;
-	dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len);
 
-	bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
-	bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
-	bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
+	do {
+		if (len > BSPI_READ_LENGTH)
+			rdlen = BSPI_READ_LENGTH;
+		else
+			rdlen = len;
+
+		reinit_completion(&qspi->bspi_done);
+		bcm_qspi_enable_bspi(qspi);
+		len_words = (rdlen + 3) >> 2;
+		qspi->bspi_rf_msg = msg;
+		qspi->bspi_rf_msg_status = 0;
+		qspi->bspi_rf_msg_len = rdlen;
+		dev_dbg(&qspi->pdev->dev,
+			"bspi xfr addr 0x%x len 0x%x", addr, rdlen);
+		bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
+		bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
+		bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
+		if (qspi->soc_intc) {
+			/*
+			 * clear soc MSPI and BSPI interrupts and enable
+			 * BSPI interrupts.
+			 */
+			soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
+			soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
+		}
 
-	if (qspi->soc_intc) {
-		/*
-		 * clear soc MSPI and BSPI interrupts and enable
-		 * BSPI interrupts.
-		 */
-		soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
-		soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
+		/* Must flush previous writes before starting BSPI operation */
+		mb();
+		bcm_qspi_bspi_lr_start(qspi);
+		if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
+			dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
+			ret = -ETIMEDOUT;
+			break;
+		}
+
+		/* set msg return length */
+		msg->retlen += rdlen;
+		addr += rdlen;
+		len -= rdlen;
+	} while (len);
+
+	return ret;
+}
+
+static int bcm_qspi_transfer_one(struct spi_master *master,
+				 struct spi_device *spi,
+				 struct spi_transfer *trans)
+{
+	struct bcm_qspi *qspi = spi_master_get_devdata(master);
+	int slots;
+	unsigned long timeo = msecs_to_jiffies(100);
+
+	bcm_qspi_chip_select(qspi, spi->chip_select);
+	qspi->trans_pos.trans = trans;
+	qspi->trans_pos.byte = 0;
+
+	while (qspi->trans_pos.byte < trans->len) {
+		reinit_completion(&qspi->mspi_done);
+
+		slots = write_to_hw(qspi, spi);
+		if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) {
+			dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n");
+			return -ETIMEDOUT;
+		}
+
+		read_from_hw(qspi, slots);
 	}
 
-	/* Must flush previous writes before starting BSPI operation */
-	mb();
+	return 0;
+}
 
-	bcm_qspi_bspi_lr_start(qspi);
-	if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
-		dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
-		ret = -ETIMEDOUT;
-	} else {
-		/* set the return length for the caller */
-		msg->retlen = len;
+static int bcm_qspi_mspi_flash_read(struct spi_device *spi,
+				    struct spi_flash_read_message *msg)
+{
+	struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
+	struct spi_transfer t[2];
+	u8 cmd[6];
+	int ret;
+
+	memset(cmd, 0, sizeof(cmd));
+	memset(t, 0, sizeof(t));
+
+	/* tx */
+	/* opcode is in cmd[0] */
+	cmd[0] = msg->read_opcode;
+	cmd[1] = msg->from >> (msg->addr_width * 8 -  8);
+	cmd[2] = msg->from >> (msg->addr_width * 8 - 16);
+	cmd[3] = msg->from >> (msg->addr_width * 8 - 24);
+	cmd[4] = msg->from >> (msg->addr_width * 8 - 32);
+	t[0].tx_buf = cmd;
+	t[0].len = msg->addr_width + msg->dummy_bytes + 1;
+	t[0].bits_per_word = spi->bits_per_word;
+	t[0].tx_nbits = msg->opcode_nbits;
+	/* lets mspi know that this is not last transfer */
+	qspi->trans_pos.mspi_last_trans = false;
+	ret = bcm_qspi_transfer_one(spi->master, spi, &t[0]);
+
+	/* rx */
+	qspi->trans_pos.mspi_last_trans = true;
+	if (!ret) {
+		/* rx */
+		t[1].rx_buf = msg->buf;
+		t[1].len = msg->len;
+		t[1].rx_nbits =  msg->data_nbits;
+		t[1].bits_per_word = spi->bits_per_word;
+		ret = bcm_qspi_transfer_one(spi->master, spi, &t[1]);
 	}
 
+	if (!ret)
+		msg->retlen = msg->len;
+
 	return ret;
 }
 
@@ -918,8 +1008,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
 		mspi_read = true;
 
 	if (mspi_read)
-		/* this will make the m25p80 read to fallback to mspi read */
-		return -EAGAIN;
+		return bcm_qspi_mspi_flash_read(spi, msg);
 
 	io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
 	addrlen = msg->addr_width;
@@ -931,33 +1020,6 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
 	return ret;
 }
 
-static int bcm_qspi_transfer_one(struct spi_master *master,
-				 struct spi_device *spi,
-				 struct spi_transfer *trans)
-{
-	struct bcm_qspi *qspi = spi_master_get_devdata(master);
-	int slots;
-	unsigned long timeo = msecs_to_jiffies(100);
-
-	bcm_qspi_chip_select(qspi, spi->chip_select);
-	qspi->trans_pos.trans = trans;
-	qspi->trans_pos.byte = 0;
-
-	while (qspi->trans_pos.byte < trans->len) {
-		reinit_completion(&qspi->mspi_done);
-
-		slots = write_to_hw(qspi, spi);
-		if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) {
-			dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n");
-			return -ETIMEDOUT;
-		}
-
-		read_from_hw(qspi, slots);
-	}
-
-	return 0;
-}
-
 static void bcm_qspi_cleanup(struct spi_device *spi)
 {
 	struct bcm_qspi_parms *xp = spi_get_ctldata(spi);
@@ -1187,6 +1249,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	qspi->pdev = pdev;
 	qspi->trans_pos.trans = NULL;
 	qspi->trans_pos.byte = 0;
+	qspi->trans_pos.mspi_last_trans = true;
 	qspi->master = master;
 
 	master->bus_num = -1;
@@ -1345,7 +1408,6 @@ int bcm_qspi_remove(struct platform_device *pdev)
 {
 	struct bcm_qspi *qspi = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	bcm_qspi_hw_uninit(qspi);
 	clk_disable_unprepare(qspi->clk);
 	kfree(qspi->dev_ids);
diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c
index afb51699dbb5..6e409eabe1c9 100644
--- a/drivers/spi/spi-bcm53xx.c
+++ b/drivers/spi/spi-bcm53xx.c
@@ -1,3 +1,11 @@
+/*
+ * Copyright (C) 2014-2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
 #define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
@@ -275,10 +283,6 @@ static int bcm53xxspi_flash_read(struct spi_device *spi,
  * BCMA
  **************************************************/
 
-static struct spi_board_info bcm53xx_info = {
-	.modalias	= "bcm53xxspiflash",
-};
-
 static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
 	{},
@@ -311,6 +315,7 @@ static int bcm53xxspi_bcma_probe(struct bcma_device *core)
 	b53spi->bspi = true;
 	bcm53xxspi_disable_bspi(b53spi);
 
+	master->dev.of_node = dev->of_node;
 	master->transfer_one = bcm53xxspi_transfer_one;
 	if (b53spi->mmio_base)
 		master->spi_flash_read = bcm53xxspi_flash_read;
@@ -324,9 +329,6 @@ static int bcm53xxspi_bcma_probe(struct bcma_device *core)
 		return err;
 	}
 
-	/* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
-	spi_new_device(master, &bcm53xx_info);
-
 	return 0;
 }
 
@@ -361,4 +363,4 @@ module_exit(bcm53xxspi_module_exit);
 
 MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver");
 MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 054012f87567..b217c22ff72f 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -107,9 +107,9 @@ static const struct file_operations dw_spi_regs_ops = {
 
 static int dw_spi_debugfs_init(struct dw_spi *dws)
 {
-	char name[128];
+	char name[32];
 
-	snprintf(name, 128, "dw_spi-%s", dev_name(&dws->master->dev));
+	snprintf(name, 32, "dw_spi%d", dws->master->bus_num);
 	dws->debugfs = debugfs_create_dir(name, NULL);
 	if (!dws->debugfs)
 		return -ENOMEM;
@@ -486,9 +486,9 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 	dws->type = SSI_MOTO_SPI;
 	dws->dma_inited = 0;
 	dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
-	snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num);
 
-	ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dws->name, master);
+	ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dev_name(dev),
+			  master);
 	if (ret < 0) {
 		dev_err(dev, "can not get IRQ\n");
 		goto err_free_master;
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index c21ca02f8ec5..da5eab62df34 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -101,7 +101,6 @@ struct dw_spi_dma_ops {
 struct dw_spi {
 	struct spi_master	*master;
 	enum dw_ssi_type	type;
-	char			name[16];
 
 	void __iomem		*regs;
 	unsigned long		paddr;
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 17a6387e20b5..b5d766064b7b 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -28,6 +28,7 @@
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/scatterlist.h>
+#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 
 #include <linux/platform_data/dma-ep93xx.h>
@@ -107,16 +108,6 @@ struct ep93xx_spi {
 	void				*zeropage;
 };
 
-/**
- * struct ep93xx_spi_chip - SPI device hardware settings
- * @spi: back pointer to the SPI device
- * @ops: private chip operations
- */
-struct ep93xx_spi_chip {
-	const struct spi_device		*spi;
-	struct ep93xx_spi_chip_ops	*ops;
-};
-
 /* converts bits per word to CR0.DSS value */
 #define bits_per_word_to_dss(bpw)	((bpw) - 1)
 
@@ -229,104 +220,36 @@ static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi,
 	return -EINVAL;
 }
 
-static void ep93xx_spi_cs_control(struct spi_device *spi, bool control)
-{
-	struct ep93xx_spi_chip *chip = spi_get_ctldata(spi);
-	int value = (spi->mode & SPI_CS_HIGH) ? control : !control;
-
-	if (chip->ops && chip->ops->cs_control)
-		chip->ops->cs_control(spi, value);
-}
-
-/**
- * ep93xx_spi_setup() - setup an SPI device
- * @spi: SPI device to setup
- *
- * This function sets up SPI device mode, speed etc. Can be called multiple
- * times for a single device. Returns %0 in case of success, negative error in
- * case of failure. When this function returns success, the device is
- * deselected.
- */
-static int ep93xx_spi_setup(struct spi_device *spi)
+static void ep93xx_spi_cs_control(struct spi_device *spi, bool enable)
 {
-	struct ep93xx_spi *espi = spi_master_get_devdata(spi->master);
-	struct ep93xx_spi_chip *chip;
+	if (spi->mode & SPI_CS_HIGH)
+		enable = !enable;
 
-	chip = spi_get_ctldata(spi);
-	if (!chip) {
-		dev_dbg(&espi->pdev->dev, "initial setup for %s\n",
-			spi->modalias);
-
-		chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-		if (!chip)
-			return -ENOMEM;
-
-		chip->spi = spi;
-		chip->ops = spi->controller_data;
-
-		if (chip->ops && chip->ops->setup) {
-			int ret = chip->ops->setup(spi);
-
-			if (ret) {
-				kfree(chip);
-				return ret;
-			}
-		}
-
-		spi_set_ctldata(spi, chip);
-	}
-
-	ep93xx_spi_cs_control(spi, false);
-	return 0;
+	if (gpio_is_valid(spi->cs_gpio))
+		gpio_set_value(spi->cs_gpio, !enable);
 }
 
-/**
- * ep93xx_spi_cleanup() - cleans up master controller specific state
- * @spi: SPI device to cleanup
- *
- * This function releases master controller specific state for given @spi
- * device.
- */
-static void ep93xx_spi_cleanup(struct spi_device *spi)
-{
-	struct ep93xx_spi_chip *chip;
-
-	chip = spi_get_ctldata(spi);
-	if (chip) {
-		if (chip->ops && chip->ops->cleanup)
-			chip->ops->cleanup(spi);
-		spi_set_ctldata(spi, NULL);
-		kfree(chip);
-	}
-}
-
-/**
- * ep93xx_spi_chip_setup() - configures hardware according to given @chip
- * @espi: ep93xx SPI controller struct
- * @chip: chip specific settings
- * @speed_hz: transfer speed
- * @bits_per_word: transfer bits_per_word
- */
 static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
-				 const struct ep93xx_spi_chip *chip,
-				 u32 speed_hz, u8 bits_per_word)
+				 struct spi_device *spi,
+				 struct spi_transfer *xfer)
 {
-	u8 dss = bits_per_word_to_dss(bits_per_word);
+	u8 dss = bits_per_word_to_dss(xfer->bits_per_word);
 	u8 div_cpsr = 0;
 	u8 div_scr = 0;
 	u16 cr0;
 	int err;
 
-	err = ep93xx_spi_calc_divisors(espi, speed_hz, &div_cpsr, &div_scr);
+	err = ep93xx_spi_calc_divisors(espi, xfer->speed_hz,
+				       &div_cpsr, &div_scr);
 	if (err)
 		return err;
 
 	cr0 = div_scr << SSPCR0_SCR_SHIFT;
-	cr0 |= (chip->spi->mode & (SPI_CPHA|SPI_CPOL)) << SSPCR0_MODE_SHIFT;
+	cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT;
 	cr0 |= dss;
 
 	dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
-		chip->spi->mode, div_cpsr, div_scr, dss);
+		spi->mode, div_cpsr, div_scr, dss);
 	dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0);
 
 	ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
@@ -603,12 +526,11 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
 					struct spi_message *msg,
 					struct spi_transfer *t)
 {
-	struct ep93xx_spi_chip *chip = spi_get_ctldata(msg->spi);
 	int err;
 
 	msg->state = t;
 
-	err = ep93xx_spi_chip_setup(espi, chip, t->speed_hz, t->bits_per_word);
+	err = ep93xx_spi_chip_setup(espi, msg->spi, t);
 	if (err) {
 		dev_err(&espi->pdev->dev,
 			"failed to setup chip for transfer\n");
@@ -863,8 +785,13 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
 	struct resource *res;
 	int irq;
 	int error;
+	int i;
 
 	info = dev_get_platdata(&pdev->dev);
+	if (!info) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -EINVAL;
+	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -882,14 +809,36 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
 	if (!master)
 		return -ENOMEM;
 
-	master->setup = ep93xx_spi_setup;
 	master->transfer_one_message = ep93xx_spi_transfer_one_message;
-	master->cleanup = ep93xx_spi_cleanup;
 	master->bus_num = pdev->id;
-	master->num_chipselect = info->num_chipselect;
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
 
+	master->num_chipselect = info->num_chipselect;
+	master->cs_gpios = devm_kzalloc(&master->dev,
+					sizeof(int) * master->num_chipselect,
+					GFP_KERNEL);
+	if (!master->cs_gpios) {
+		error = -ENOMEM;
+		goto fail_release_master;
+	}
+
+	for (i = 0; i < master->num_chipselect; i++) {
+		master->cs_gpios[i] = info->chipselect[i];
+
+		if (!gpio_is_valid(master->cs_gpios[i]))
+			continue;
+
+		error = devm_gpio_request_one(&pdev->dev, master->cs_gpios[i],
+					      GPIOF_OUT_INIT_HIGH,
+					      "ep93xx-spi");
+		if (error) {
+			dev_err(&pdev->dev, "could not request cs gpio %d\n",
+				master->cs_gpios[i]);
+			goto fail_release_master;
+		}
+	}
+
 	platform_set_drvdata(pdev, master);
 
 	espi = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 52551f6d0c7d..cb3c73007ca1 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -366,7 +366,7 @@ static int fsl_lpspi_transfer_one_msg(struct spi_master *master,
 	struct spi_transfer *xfer;
 	bool is_first_xfer = true;
 	u32 temp;
-	int ret;
+	int ret = 0;
 
 	msg->status = 0;
 	msg->actual_length = 0;
@@ -512,9 +512,9 @@ static int fsl_lpspi_remove(struct platform_device *pdev)
 
 static struct platform_driver fsl_lpspi_driver = {
 	.driver = {
-		   .name = DRIVER_NAME,
-		   .of_match_table = fsl_lpspi_dt_ids,
-		   },
+		.name = DRIVER_NAME,
+		.of_match_table = fsl_lpspi_dt_ids,
+	},
 	.probe = fsl_lpspi_probe,
 	.remove = fsl_lpspi_remove,
 };
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 8b290d9d7935..0fc3452652ae 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -267,10 +267,9 @@ static int fsl_spi_setup_transfer(struct spi_device *spi,
 	if ((mpc8xxx_spi->spibrg / hz) > 64) {
 		cs->hw_mode |= SPMODE_DIV16;
 		pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1;
-
-		WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. "
-			  "Will use %d Hz instead.\n", dev_name(&spi->dev),
-			  hz, mpc8xxx_spi->spibrg / 1024);
+		WARN_ONCE(pm > 16,
+			  "%s: Requested speed is too low: %d Hz. Will use %d Hz instead.\n",
+			  dev_name(&spi->dev), hz, mpc8xxx_spi->spibrg / 1024);
 		if (pm > 16)
 			pm = 16;
 	} else {
@@ -727,12 +726,13 @@ static int of_fsl_spi_get_chipselects(struct device *dev)
 		return 0;
 	}
 
-	pinfo->gpios = kmalloc(ngpios * sizeof(*pinfo->gpios), GFP_KERNEL);
+	pinfo->gpios = kmalloc_array(ngpios, sizeof(*pinfo->gpios),
+				     GFP_KERNEL);
 	if (!pinfo->gpios)
 		return -ENOMEM;
 	memset(pinfo->gpios, -1, ngpios * sizeof(*pinfo->gpios));
 
-	pinfo->alow_flags = kzalloc(ngpios * sizeof(*pinfo->alow_flags),
+	pinfo->alow_flags = kcalloc(ngpios, sizeof(*pinfo->alow_flags),
 				    GFP_KERNEL);
 	if (!pinfo->alow_flags) {
 		ret = -ENOMEM;
@@ -762,8 +762,9 @@ static int of_fsl_spi_get_chipselects(struct device *dev)
 		ret = gpio_direction_output(pinfo->gpios[i],
 					    pinfo->alow_flags[i]);
 		if (ret) {
-			dev_err(dev, "can't set output direction for gpio "
-				"#%d: %d\n", i, ret);
+			dev_err(dev,
+				"can't set output direction for gpio #%d: %d\n",
+				i, ret);
 			goto err_loop;
 		}
 	}
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 32ced64a5bb9..9a7c62f471dc 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -211,7 +211,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 			 struct spi_transfer *transfer)
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
-	unsigned int bpw;
+	unsigned int bpw, i;
 
 	if (!master->dma_rx)
 		return false;
@@ -228,12 +228,16 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 	if (bpw != 1 && bpw != 2 && bpw != 4)
 		return false;
 
-	if (transfer->len < spi_imx->wml * bpw)
-		return false;
+	for (i = spi_imx_get_fifosize(spi_imx) / 2; i > 0; i--) {
+		if (!(transfer->len % (i * bpw)))
+			break;
+	}
 
-	if (transfer->len % (spi_imx->wml * bpw))
+	if (i == 0)
 		return false;
 
+	spi_imx->wml = i;
+
 	return true;
 }
 
@@ -837,10 +841,6 @@ static int spi_imx_dma_configure(struct spi_master *master,
 	struct dma_slave_config rx = {}, tx = {};
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
 
-	if (bytes_per_word == spi_imx->bytes_per_word)
-		/* Same as last time */
-		return 0;
-
 	switch (bytes_per_word) {
 	case 4:
 		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c
new file mode 100644
index 000000000000..8a626f7fccea
--- /dev/null
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -0,0 +1,983 @@
+/*
+ * Copyright (C) 2011-2015 Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+ * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+
+#ifdef CONFIG_LANTIQ
+#include <lantiq_soc.h>
+#endif
+
+#define SPI_RX_IRQ_NAME		"spi_rx"
+#define SPI_TX_IRQ_NAME		"spi_tx"
+#define SPI_ERR_IRQ_NAME	"spi_err"
+#define SPI_FRM_IRQ_NAME	"spi_frm"
+
+#define SPI_CLC			0x00
+#define SPI_PISEL		0x04
+#define SPI_ID			0x08
+#define SPI_CON			0x10
+#define SPI_STAT		0x14
+#define SPI_WHBSTATE		0x18
+#define SPI_TB			0x20
+#define SPI_RB			0x24
+#define SPI_RXFCON		0x30
+#define SPI_TXFCON		0x34
+#define SPI_FSTAT		0x38
+#define SPI_BRT			0x40
+#define SPI_BRSTAT		0x44
+#define SPI_SFCON		0x60
+#define SPI_SFSTAT		0x64
+#define SPI_GPOCON		0x70
+#define SPI_GPOSTAT		0x74
+#define SPI_FPGO		0x78
+#define SPI_RXREQ		0x80
+#define SPI_RXCNT		0x84
+#define SPI_DMACON		0xec
+#define SPI_IRNEN		0xf4
+#define SPI_IRNICR		0xf8
+#define SPI_IRNCR		0xfc
+
+#define SPI_CLC_SMC_S		16	/* Clock divider for sleep mode */
+#define SPI_CLC_SMC_M		(0xFF << SPI_CLC_SMC_S)
+#define SPI_CLC_RMC_S		8	/* Clock divider for normal run mode */
+#define SPI_CLC_RMC_M		(0xFF << SPI_CLC_RMC_S)
+#define SPI_CLC_DISS		BIT(1)	/* Disable status bit */
+#define SPI_CLC_DISR		BIT(0)	/* Disable request bit */
+
+#define SPI_ID_TXFS_S		24	/* Implemented TX FIFO size */
+#define SPI_ID_TXFS_M		(0x3F << SPI_ID_TXFS_S)
+#define SPI_ID_RXFS_S		16	/* Implemented RX FIFO size */
+#define SPI_ID_RXFS_M		(0x3F << SPI_ID_RXFS_S)
+#define SPI_ID_MOD_S		8	/* Module ID */
+#define SPI_ID_MOD_M		(0xff << SPI_ID_MOD_S)
+#define SPI_ID_CFG_S		5	/* DMA interface support */
+#define SPI_ID_CFG_M		(1 << SPI_ID_CFG_S)
+#define SPI_ID_REV_M		0x1F	/* Hardware revision number */
+
+#define SPI_CON_BM_S		16	/* Data width selection */
+#define SPI_CON_BM_M		(0x1F << SPI_CON_BM_S)
+#define SPI_CON_EM		BIT(24)	/* Echo mode */
+#define SPI_CON_IDLE		BIT(23)	/* Idle bit value */
+#define SPI_CON_ENBV		BIT(22)	/* Enable byte valid control */
+#define SPI_CON_RUEN		BIT(12)	/* Receive underflow error enable */
+#define SPI_CON_TUEN		BIT(11)	/* Transmit underflow error enable */
+#define SPI_CON_AEN		BIT(10)	/* Abort error enable */
+#define SPI_CON_REN		BIT(9)	/* Receive overflow error enable */
+#define SPI_CON_TEN		BIT(8)	/* Transmit overflow error enable */
+#define SPI_CON_LB		BIT(7)	/* Loopback control */
+#define SPI_CON_PO		BIT(6)	/* Clock polarity control */
+#define SPI_CON_PH		BIT(5)	/* Clock phase control */
+#define SPI_CON_HB		BIT(4)	/* Heading control */
+#define SPI_CON_RXOFF		BIT(1)	/* Switch receiver off */
+#define SPI_CON_TXOFF		BIT(0)	/* Switch transmitter off */
+
+#define SPI_STAT_RXBV_S		28
+#define SPI_STAT_RXBV_M		(0x7 << SPI_STAT_RXBV_S)
+#define SPI_STAT_BSY		BIT(13)	/* Busy flag */
+#define SPI_STAT_RUE		BIT(12)	/* Receive underflow error flag */
+#define SPI_STAT_TUE		BIT(11)	/* Transmit underflow error flag */
+#define SPI_STAT_AE		BIT(10)	/* Abort error flag */
+#define SPI_STAT_RE		BIT(9)	/* Receive error flag */
+#define SPI_STAT_TE		BIT(8)	/* Transmit error flag */
+#define SPI_STAT_ME		BIT(7)	/* Mode error flag */
+#define SPI_STAT_MS		BIT(1)	/* Master/slave select bit */
+#define SPI_STAT_EN		BIT(0)	/* Enable bit */
+#define SPI_STAT_ERRORS		(SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \
+				 SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE)
+
+#define SPI_WHBSTATE_SETTUE	BIT(15)	/* Set transmit underflow error flag */
+#define SPI_WHBSTATE_SETAE	BIT(14)	/* Set abort error flag */
+#define SPI_WHBSTATE_SETRE	BIT(13)	/* Set receive error flag */
+#define SPI_WHBSTATE_SETTE	BIT(12)	/* Set transmit error flag */
+#define SPI_WHBSTATE_CLRTUE	BIT(11)	/* Clear transmit underflow error flag */
+#define SPI_WHBSTATE_CLRAE	BIT(10)	/* Clear abort error flag */
+#define SPI_WHBSTATE_CLRRE	BIT(9)	/* Clear receive error flag */
+#define SPI_WHBSTATE_CLRTE	BIT(8)	/* Clear transmit error flag */
+#define SPI_WHBSTATE_SETME	BIT(7)	/* Set mode error flag */
+#define SPI_WHBSTATE_CLRME	BIT(6)	/* Clear mode error flag */
+#define SPI_WHBSTATE_SETRUE	BIT(5)	/* Set receive underflow error flag */
+#define SPI_WHBSTATE_CLRRUE	BIT(4)	/* Clear receive underflow error flag */
+#define SPI_WHBSTATE_SETMS	BIT(3)	/* Set master select bit */
+#define SPI_WHBSTATE_CLRMS	BIT(2)	/* Clear master select bit */
+#define SPI_WHBSTATE_SETEN	BIT(1)	/* Set enable bit (operational mode) */
+#define SPI_WHBSTATE_CLREN	BIT(0)	/* Clear enable bit (config mode */
+#define SPI_WHBSTATE_CLR_ERRORS	(SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \
+				 SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \
+				 SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE)
+
+#define SPI_RXFCON_RXFITL_S	8	/* FIFO interrupt trigger level */
+#define SPI_RXFCON_RXFITL_M	(0x3F << SPI_RXFCON_RXFITL_S)
+#define SPI_RXFCON_RXFLU	BIT(1)	/* FIFO flush */
+#define SPI_RXFCON_RXFEN	BIT(0)	/* FIFO enable */
+
+#define SPI_TXFCON_TXFITL_S	8	/* FIFO interrupt trigger level */
+#define SPI_TXFCON_TXFITL_M	(0x3F << SPI_TXFCON_TXFITL_S)
+#define SPI_TXFCON_TXFLU	BIT(1)	/* FIFO flush */
+#define SPI_TXFCON_TXFEN	BIT(0)	/* FIFO enable */
+
+#define SPI_FSTAT_RXFFL_S	0
+#define SPI_FSTAT_RXFFL_M	(0x3f << SPI_FSTAT_RXFFL_S)
+#define SPI_FSTAT_TXFFL_S	8
+#define SPI_FSTAT_TXFFL_M	(0x3f << SPI_FSTAT_TXFFL_S)
+
+#define SPI_GPOCON_ISCSBN_S	8
+#define SPI_GPOCON_INVOUTN_S	0
+
+#define SPI_FGPO_SETOUTN_S	8
+#define SPI_FGPO_CLROUTN_S	0
+
+#define SPI_RXREQ_RXCNT_M	0xFFFF	/* Receive count value */
+#define SPI_RXCNT_TODO_M	0xFFFF	/* Recevie to-do value */
+
+#define SPI_IRNEN_TFI		BIT(4)	/* TX finished interrupt */
+#define SPI_IRNEN_F		BIT(3)	/* Frame end interrupt request */
+#define SPI_IRNEN_E		BIT(2)	/* Error end interrupt request */
+#define SPI_IRNEN_T_XWAY	BIT(1)	/* Transmit end interrupt request */
+#define SPI_IRNEN_R_XWAY	BIT(0)	/* Receive end interrupt request */
+#define SPI_IRNEN_R_XRX		BIT(1)	/* Transmit end interrupt request */
+#define SPI_IRNEN_T_XRX		BIT(0)	/* Receive end interrupt request */
+#define SPI_IRNEN_ALL		0x1F
+
+struct lantiq_ssc_hwcfg {
+	unsigned int irnen_r;
+	unsigned int irnen_t;
+};
+
+struct lantiq_ssc_spi {
+	struct spi_master		*master;
+	struct device			*dev;
+	void __iomem			*regbase;
+	struct clk			*spi_clk;
+	struct clk			*fpi_clk;
+	const struct lantiq_ssc_hwcfg	*hwcfg;
+
+	spinlock_t			lock;
+	struct workqueue_struct		*wq;
+	struct work_struct		work;
+
+	const u8			*tx;
+	u8				*rx;
+	unsigned int			tx_todo;
+	unsigned int			rx_todo;
+	unsigned int			bits_per_word;
+	unsigned int			speed_hz;
+	unsigned int			tx_fifo_size;
+	unsigned int			rx_fifo_size;
+	unsigned int			base_cs;
+};
+
+static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg)
+{
+	return __raw_readl(spi->regbase + reg);
+}
+
+static void lantiq_ssc_writel(const struct lantiq_ssc_spi *spi, u32 val,
+			      u32 reg)
+{
+	__raw_writel(val, spi->regbase + reg);
+}
+
+static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr,
+			     u32 set, u32 reg)
+{
+	u32 val = __raw_readl(spi->regbase + reg);
+
+	val &= ~clr;
+	val |= set;
+	__raw_writel(val, spi->regbase + reg);
+}
+
+static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi)
+{
+	u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+
+	return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
+}
+
+static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi)
+{
+	u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+
+	return fstat & SPI_FSTAT_RXFFL_M;
+}
+
+static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi)
+{
+	return spi->tx_fifo_size - tx_fifo_level(spi);
+}
+
+static void rx_fifo_reset(const struct lantiq_ssc_spi *spi)
+{
+	u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S;
+
+	val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
+	lantiq_ssc_writel(spi, val, SPI_RXFCON);
+}
+
+static void tx_fifo_reset(const struct lantiq_ssc_spi *spi)
+{
+	u32 val = 1 << SPI_TXFCON_TXFITL_S;
+
+	val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
+	lantiq_ssc_writel(spi, val, SPI_TXFCON);
+}
+
+static void rx_fifo_flush(const struct lantiq_ssc_spi *spi)
+{
+	lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
+}
+
+static void tx_fifo_flush(const struct lantiq_ssc_spi *spi)
+{
+	lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
+}
+
+static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi)
+{
+	lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
+}
+
+static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi)
+{
+	lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
+}
+
+static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi,
+			      unsigned int max_speed_hz)
+{
+	u32 spi_clk, brt;
+
+	/*
+	 * SPI module clock is derived from FPI bus clock dependent on
+	 * divider value in CLC.RMS which is always set to 1.
+	 *
+	 *                 f_SPI
+	 * baudrate = --------------
+	 *             2 * (BR + 1)
+	 */
+	spi_clk = clk_get_rate(spi->fpi_clk) / 2;
+
+	if (max_speed_hz > spi_clk)
+		brt = 0;
+	else
+		brt = spi_clk / max_speed_hz - 1;
+
+	if (brt > 0xFFFF)
+		brt = 0xFFFF;
+
+	dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
+		spi_clk, max_speed_hz, brt);
+
+	lantiq_ssc_writel(spi, brt, SPI_BRT);
+}
+
+static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi,
+				   unsigned int bits_per_word)
+{
+	u32 bm;
+
+	/* CON.BM value = bits_per_word - 1 */
+	bm = (bits_per_word - 1) << SPI_CON_BM_S;
+
+	lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
+}
+
+static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi,
+				unsigned int mode)
+{
+	u32 con_set = 0, con_clr = 0;
+
+	/*
+	 * SPI mode mapping in CON register:
+	 * Mode CPOL CPHA CON.PO CON.PH
+	 *  0    0    0      0      1
+	 *  1    0    1      0      0
+	 *  2    1    0      1      1
+	 *  3    1    1      1      0
+	 */
+	if (mode & SPI_CPHA)
+		con_clr |= SPI_CON_PH;
+	else
+		con_set |= SPI_CON_PH;
+
+	if (mode & SPI_CPOL)
+		con_set |= SPI_CON_PO | SPI_CON_IDLE;
+	else
+		con_clr |= SPI_CON_PO | SPI_CON_IDLE;
+
+	/* Set heading control */
+	if (mode & SPI_LSB_FIRST)
+		con_clr |= SPI_CON_HB;
+	else
+		con_set |= SPI_CON_HB;
+
+	/* Set loopback mode */
+	if (mode & SPI_LOOP)
+		con_set |= SPI_CON_LB;
+	else
+		con_clr |= SPI_CON_LB;
+
+	lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON);
+}
+
+static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi)
+{
+	const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg;
+
+	/*
+	 * Set clock divider for run mode to 1 to
+	 * run at same frequency as FPI bus
+	 */
+	lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
+
+	/* Put controller into config mode */
+	hw_enter_config_mode(spi);
+
+	/* Clear error flags */
+	lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+
+	/* Enable error checking, disable TX/RX */
+	lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
+		SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+
+	/* Setup default SPI mode */
+	hw_setup_bits_per_word(spi, spi->bits_per_word);
+	hw_setup_clock_mode(spi, SPI_MODE_0);
+
+	/* Enable master mode and clear error flags */
+	lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
+			       SPI_WHBSTATE);
+
+	/* Reset GPIO/CS registers */
+	lantiq_ssc_writel(spi, 0, SPI_GPOCON);
+	lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO);
+
+	/* Enable and flush FIFOs */
+	rx_fifo_reset(spi);
+	tx_fifo_reset(spi);
+
+	/* Enable interrupts */
+	lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
+			  SPI_IRNEN);
+}
+
+static int lantiq_ssc_setup(struct spi_device *spidev)
+{
+	struct spi_master *master = spidev->master;
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+	unsigned int cs = spidev->chip_select;
+	u32 gpocon;
+
+	/* GPIOs are used for CS */
+	if (gpio_is_valid(spidev->cs_gpio))
+		return 0;
+
+	dev_dbg(spi->dev, "using internal chipselect %u\n", cs);
+
+	if (cs < spi->base_cs) {
+		dev_err(spi->dev,
+			"chipselect %i too small (min %i)\n", cs, spi->base_cs);
+		return -EINVAL;
+	}
+
+	/* set GPO pin to CS mode */
+	gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S);
+
+	/* invert GPO pin */
+	if (spidev->mode & SPI_CS_HIGH)
+		gpocon |= 1 << (cs - spi->base_cs);
+
+	lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON);
+
+	return 0;
+}
+
+static int lantiq_ssc_prepare_message(struct spi_master *master,
+				      struct spi_message *message)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+	hw_enter_config_mode(spi);
+	hw_setup_clock_mode(spi, message->spi->mode);
+	hw_enter_active_mode(spi);
+
+	return 0;
+}
+
+static void hw_setup_transfer(struct lantiq_ssc_spi *spi,
+			      struct spi_device *spidev, struct spi_transfer *t)
+{
+	unsigned int speed_hz = t->speed_hz;
+	unsigned int bits_per_word = t->bits_per_word;
+	u32 con;
+
+	if (bits_per_word != spi->bits_per_word ||
+		speed_hz != spi->speed_hz) {
+		hw_enter_config_mode(spi);
+		hw_setup_speed_hz(spi, speed_hz);
+		hw_setup_bits_per_word(spi, bits_per_word);
+		hw_enter_active_mode(spi);
+
+		spi->speed_hz = speed_hz;
+		spi->bits_per_word = bits_per_word;
+	}
+
+	/* Configure transmitter and receiver */
+	con = lantiq_ssc_readl(spi, SPI_CON);
+	if (t->tx_buf)
+		con &= ~SPI_CON_TXOFF;
+	else
+		con |= SPI_CON_TXOFF;
+
+	if (t->rx_buf)
+		con &= ~SPI_CON_RXOFF;
+	else
+		con |= SPI_CON_RXOFF;
+
+	lantiq_ssc_writel(spi, con, SPI_CON);
+}
+
+static int lantiq_ssc_unprepare_message(struct spi_master *master,
+					struct spi_message *message)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+	flush_workqueue(spi->wq);
+
+	/* Disable transmitter and receiver while idle */
+	lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+
+	return 0;
+}
+
+static void tx_fifo_write(struct lantiq_ssc_spi *spi)
+{
+	const u8 *tx8;
+	const u16 *tx16;
+	const u32 *tx32;
+	u32 data;
+	unsigned int tx_free = tx_fifo_free(spi);
+
+	while (spi->tx_todo && tx_free) {
+		switch (spi->bits_per_word) {
+		case 2 ... 8:
+			tx8 = spi->tx;
+			data = *tx8;
+			spi->tx_todo--;
+			spi->tx++;
+			break;
+		case 16:
+			tx16 = (u16 *) spi->tx;
+			data = *tx16;
+			spi->tx_todo -= 2;
+			spi->tx += 2;
+			break;
+		case 32:
+			tx32 = (u32 *) spi->tx;
+			data = *tx32;
+			spi->tx_todo -= 4;
+			spi->tx += 4;
+			break;
+		default:
+			WARN_ON(1);
+			data = 0;
+			break;
+		}
+
+		lantiq_ssc_writel(spi, data, SPI_TB);
+		tx_free--;
+	}
+}
+
+static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi)
+{
+	u8 *rx8;
+	u16 *rx16;
+	u32 *rx32;
+	u32 data;
+	unsigned int rx_fill = rx_fifo_level(spi);
+
+	while (rx_fill) {
+		data = lantiq_ssc_readl(spi, SPI_RB);
+
+		switch (spi->bits_per_word) {
+		case 2 ... 8:
+			rx8 = spi->rx;
+			*rx8 = data;
+			spi->rx_todo--;
+			spi->rx++;
+			break;
+		case 16:
+			rx16 = (u16 *) spi->rx;
+			*rx16 = data;
+			spi->rx_todo -= 2;
+			spi->rx += 2;
+			break;
+		case 32:
+			rx32 = (u32 *) spi->rx;
+			*rx32 = data;
+			spi->rx_todo -= 4;
+			spi->rx += 4;
+			break;
+		default:
+			WARN_ON(1);
+			break;
+		}
+
+		rx_fill--;
+	}
+}
+
+static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi)
+{
+	u32 data, *rx32;
+	u8 *rx8;
+	unsigned int rxbv, shift;
+	unsigned int rx_fill = rx_fifo_level(spi);
+
+	/*
+	 * In RX-only mode the bits per word value is ignored by HW. A value
+	 * of 32 is used instead. Thus all 4 bytes per FIFO must be read.
+	 * If remaining RX bytes are less than 4, the FIFO must be read
+	 * differently. The amount of received and valid bytes is indicated
+	 * by STAT.RXBV register value.
+	 */
+	while (rx_fill) {
+		if (spi->rx_todo < 4)  {
+			rxbv = (lantiq_ssc_readl(spi, SPI_STAT) &
+				SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
+			data = lantiq_ssc_readl(spi, SPI_RB);
+
+			shift = (rxbv - 1) * 8;
+			rx8 = spi->rx;
+
+			while (rxbv) {
+				*rx8++ = (data >> shift) & 0xFF;
+				rxbv--;
+				shift -= 8;
+				spi->rx_todo--;
+				spi->rx++;
+			}
+		} else {
+			data = lantiq_ssc_readl(spi, SPI_RB);
+			rx32 = (u32 *) spi->rx;
+
+			*rx32++ = data;
+			spi->rx_todo -= 4;
+			spi->rx += 4;
+		}
+		rx_fill--;
+	}
+}
+
+static void rx_request(struct lantiq_ssc_spi *spi)
+{
+	unsigned int rxreq, rxreq_max;
+
+	/*
+	 * To avoid receive overflows at high clocks it is better to request
+	 * only the amount of bytes that fits into all FIFOs. This value
+	 * depends on the FIFO size implemented in hardware.
+	 */
+	rxreq = spi->rx_todo;
+	rxreq_max = spi->rx_fifo_size * 4;
+	if (rxreq > rxreq_max)
+		rxreq = rxreq_max;
+
+	lantiq_ssc_writel(spi, rxreq, SPI_RXREQ);
+}
+
+static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
+{
+	struct lantiq_ssc_spi *spi = data;
+
+	if (spi->tx) {
+		if (spi->rx && spi->rx_todo)
+			rx_fifo_read_full_duplex(spi);
+
+		if (spi->tx_todo)
+			tx_fifo_write(spi);
+		else if (!tx_fifo_level(spi))
+			goto completed;
+	} else if (spi->rx) {
+		if (spi->rx_todo) {
+			rx_fifo_read_half_duplex(spi);
+
+			if (spi->rx_todo)
+				rx_request(spi);
+			else
+				goto completed;
+		} else {
+			goto completed;
+		}
+	}
+
+	return IRQ_HANDLED;
+
+completed:
+	queue_work(spi->wq, &spi->work);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
+{
+	struct lantiq_ssc_spi *spi = data;
+	u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+
+	if (!(stat & SPI_STAT_ERRORS))
+		return IRQ_NONE;
+
+	if (stat & SPI_STAT_RUE)
+		dev_err(spi->dev, "receive underflow error\n");
+	if (stat & SPI_STAT_TUE)
+		dev_err(spi->dev, "transmit underflow error\n");
+	if (stat & SPI_STAT_AE)
+		dev_err(spi->dev, "abort error\n");
+	if (stat & SPI_STAT_RE)
+		dev_err(spi->dev, "receive overflow error\n");
+	if (stat & SPI_STAT_TE)
+		dev_err(spi->dev, "transmit overflow error\n");
+	if (stat & SPI_STAT_ME)
+		dev_err(spi->dev, "mode error\n");
+
+	/* Clear error flags */
+	lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+
+	/* set bad status so it can be retried */
+	if (spi->master->cur_msg)
+		spi->master->cur_msg->status = -EIO;
+	queue_work(spi->wq, &spi->work);
+
+	return IRQ_HANDLED;
+}
+
+static int transfer_start(struct lantiq_ssc_spi *spi, struct spi_device *spidev,
+			  struct spi_transfer *t)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spi->lock, flags);
+
+	spi->tx = t->tx_buf;
+	spi->rx = t->rx_buf;
+
+	if (t->tx_buf) {
+		spi->tx_todo = t->len;
+
+		/* initially fill TX FIFO */
+		tx_fifo_write(spi);
+	}
+
+	if (spi->rx) {
+		spi->rx_todo = t->len;
+
+		/* start shift clock in RX-only mode */
+		if (!spi->tx)
+			rx_request(spi);
+	}
+
+	spin_unlock_irqrestore(&spi->lock, flags);
+
+	return t->len;
+}
+
+/*
+ * The driver only gets an interrupt when the FIFO is empty, but there
+ * is an additional shift register from which the data is written to
+ * the wire. We get the last interrupt when the controller starts to
+ * write the last word to the wire, not when it is finished. Do busy
+ * waiting till it finishes.
+ */
+static void lantiq_ssc_bussy_work(struct work_struct *work)
+{
+	struct lantiq_ssc_spi *spi;
+	unsigned long long timeout = 8LL * 1000LL;
+	unsigned long end;
+
+	spi = container_of(work, typeof(*spi), work);
+
+	do_div(timeout, spi->speed_hz);
+	timeout += timeout + 100; /* some tolerance */
+
+	end = jiffies + msecs_to_jiffies(timeout);
+	do {
+		u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+
+		if (!(stat & SPI_STAT_BSY)) {
+			spi_finalize_current_transfer(spi->master);
+			return;
+		}
+
+		cond_resched();
+	} while (!time_after_eq(jiffies, end));
+
+	if (spi->master->cur_msg)
+		spi->master->cur_msg->status = -EIO;
+	spi_finalize_current_transfer(spi->master);
+}
+
+static void lantiq_ssc_handle_err(struct spi_master *master,
+				  struct spi_message *message)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+	/* flush FIFOs on timeout */
+	rx_fifo_flush(spi);
+	tx_fifo_flush(spi);
+}
+
+static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(spidev->master);
+	unsigned int cs = spidev->chip_select;
+	u32 fgpo;
+
+	if (!!(spidev->mode & SPI_CS_HIGH) == enable)
+		fgpo = (1 << (cs - spi->base_cs));
+	else
+		fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S));
+
+	lantiq_ssc_writel(spi, fgpo, SPI_FPGO);
+}
+
+static int lantiq_ssc_transfer_one(struct spi_master *master,
+				   struct spi_device *spidev,
+				   struct spi_transfer *t)
+{
+	struct lantiq_ssc_spi *spi = spi_master_get_devdata(master);
+
+	hw_setup_transfer(spi, spidev, t);
+
+	return transfer_start(spi, spidev, t);
+}
+
+static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = {
+	.irnen_r = SPI_IRNEN_R_XWAY,
+	.irnen_t = SPI_IRNEN_T_XWAY,
+};
+
+static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = {
+	.irnen_r = SPI_IRNEN_R_XRX,
+	.irnen_t = SPI_IRNEN_T_XRX,
+};
+
+static const struct of_device_id lantiq_ssc_match[] = {
+	{ .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, },
+	{ .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, },
+	{ .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lantiq_ssc_match);
+
+static int lantiq_ssc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct spi_master *master;
+	struct resource *res;
+	struct lantiq_ssc_spi *spi;
+	const struct lantiq_ssc_hwcfg *hwcfg;
+	const struct of_device_id *match;
+	int err, rx_irq, tx_irq, err_irq;
+	u32 id, supports_dma, revision;
+	unsigned int num_cs;
+
+	match = of_match_device(lantiq_ssc_match, dev);
+	if (!match) {
+		dev_err(dev, "no device match\n");
+		return -EINVAL;
+	}
+	hwcfg = match->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "failed to get resources\n");
+		return -ENXIO;
+	}
+
+	rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
+	if (rx_irq < 0) {
+		dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
+		return -ENXIO;
+	}
+
+	tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
+	if (tx_irq < 0) {
+		dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
+		return -ENXIO;
+	}
+
+	err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
+	if (err_irq < 0) {
+		dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
+		return -ENXIO;
+	}
+
+	master = spi_alloc_master(dev, sizeof(struct lantiq_ssc_spi));
+	if (!master)
+		return -ENOMEM;
+
+	spi = spi_master_get_devdata(master);
+	spi->master = master;
+	spi->dev = dev;
+	spi->hwcfg = hwcfg;
+	platform_set_drvdata(pdev, spi);
+
+	spi->regbase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(spi->regbase)) {
+		err = PTR_ERR(spi->regbase);
+		goto err_master_put;
+	}
+
+	err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt,
+			       0, SPI_RX_IRQ_NAME, spi);
+	if (err)
+		goto err_master_put;
+
+	err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt,
+			       0, SPI_TX_IRQ_NAME, spi);
+	if (err)
+		goto err_master_put;
+
+	err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt,
+			       0, SPI_ERR_IRQ_NAME, spi);
+	if (err)
+		goto err_master_put;
+
+	spi->spi_clk = devm_clk_get(dev, "gate");
+	if (IS_ERR(spi->spi_clk)) {
+		err = PTR_ERR(spi->spi_clk);
+		goto err_master_put;
+	}
+	err = clk_prepare_enable(spi->spi_clk);
+	if (err)
+		goto err_master_put;
+
+	/*
+	 * Use the old clk_get_fpi() function on Lantiq platform, till it
+	 * supports common clk.
+	 */
+#if defined(CONFIG_LANTIQ) && !defined(CONFIG_COMMON_CLK)
+	spi->fpi_clk = clk_get_fpi();
+#else
+	spi->fpi_clk = clk_get(dev, "freq");
+#endif
+	if (IS_ERR(spi->fpi_clk)) {
+		err = PTR_ERR(spi->fpi_clk);
+		goto err_clk_disable;
+	}
+
+	num_cs = 8;
+	of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
+
+	spi->base_cs = 1;
+	of_property_read_u32(pdev->dev.of_node, "base-cs", &spi->base_cs);
+
+	spin_lock_init(&spi->lock);
+	spi->bits_per_word = 8;
+	spi->speed_hz = 0;
+
+	master->dev.of_node = pdev->dev.of_node;
+	master->num_chipselect = num_cs;
+	master->setup = lantiq_ssc_setup;
+	master->set_cs = lantiq_ssc_set_cs;
+	master->handle_err = lantiq_ssc_handle_err;
+	master->prepare_message = lantiq_ssc_prepare_message;
+	master->unprepare_message = lantiq_ssc_unprepare_message;
+	master->transfer_one = lantiq_ssc_transfer_one;
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH |
+				SPI_LOOP;
+	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) |
+				     SPI_BPW_MASK(16) | SPI_BPW_MASK(32);
+
+	spi->wq = alloc_ordered_workqueue(dev_name(dev), 0);
+	if (!spi->wq) {
+		err = -ENOMEM;
+		goto err_clk_put;
+	}
+	INIT_WORK(&spi->work, lantiq_ssc_bussy_work);
+
+	id = lantiq_ssc_readl(spi, SPI_ID);
+	spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
+	spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
+	supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S;
+	revision = id & SPI_ID_REV_M;
+
+	lantiq_ssc_hw_init(spi);
+
+	dev_info(dev,
+		"Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n",
+		revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma);
+
+	err = devm_spi_register_master(dev, master);
+	if (err) {
+		dev_err(dev, "failed to register spi_master\n");
+		goto err_wq_destroy;
+	}
+
+	return 0;
+
+err_wq_destroy:
+	destroy_workqueue(spi->wq);
+err_clk_put:
+	clk_put(spi->fpi_clk);
+err_clk_disable:
+	clk_disable_unprepare(spi->spi_clk);
+err_master_put:
+	spi_master_put(master);
+
+	return err;
+}
+
+static int lantiq_ssc_remove(struct platform_device *pdev)
+{
+	struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev);
+
+	lantiq_ssc_writel(spi, 0, SPI_IRNEN);
+	lantiq_ssc_writel(spi, 0, SPI_CLC);
+	rx_fifo_flush(spi);
+	tx_fifo_flush(spi);
+	hw_enter_config_mode(spi);
+
+	destroy_workqueue(spi->wq);
+	clk_disable_unprepare(spi->spi_clk);
+	clk_put(spi->fpi_clk);
+
+	return 0;
+}
+
+static struct platform_driver lantiq_ssc_driver = {
+	.probe = lantiq_ssc_probe,
+	.remove = lantiq_ssc_remove,
+	.driver = {
+		.name = "spi-lantiq-ssc",
+		.owner = THIS_MODULE,
+		.of_match_table = lantiq_ssc_match,
+	},
+};
+module_platform_driver(lantiq_ssc_driver);
+
+MODULE_DESCRIPTION("Lantiq SSC SPI controller driver");
+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@gmail.com>");
+MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:spi-lantiq-ssc");
diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c
index c36002110c30..e8b59ce4dc3a 100644
--- a/drivers/spi/spi-mpc52xx.c
+++ b/drivers/spi/spi-mpc52xx.c
@@ -437,8 +437,9 @@ static int mpc52xx_spi_probe(struct platform_device *op)
 	ms->gpio_cs_count = of_gpio_count(op->dev.of_node);
 	if (ms->gpio_cs_count > 0) {
 		master->num_chipselect = ms->gpio_cs_count;
-		ms->gpio_cs = kmalloc(ms->gpio_cs_count * sizeof(unsigned int),
-				GFP_KERNEL);
+		ms->gpio_cs = kmalloc_array(ms->gpio_cs_count,
+					    sizeof(*ms->gpio_cs),
+					    GFP_KERNEL);
 		if (!ms->gpio_cs) {
 			rc = -ENOMEM;
 			goto err_alloc_gpio;
@@ -448,8 +449,7 @@ static int mpc52xx_spi_probe(struct platform_device *op)
 			gpio_cs = of_get_gpio(op->dev.of_node, i);
 			if (gpio_cs < 0) {
 				dev_err(&op->dev,
-					"could not parse the gpio field "
-					"in oftree\n");
+					"could not parse the gpio field in oftree\n");
 				rc = -ENODEV;
 				goto err_gpio;
 			}
@@ -457,8 +457,8 @@ static int mpc52xx_spi_probe(struct platform_device *op)
 			rc = gpio_request(gpio_cs, dev_name(&op->dev));
 			if (rc) {
 				dev_err(&op->dev,
-					"can't request spi cs gpio #%d "
-					"on gpio line %d\n", i, gpio_cs);
+					"can't request spi cs gpio #%d on gpio line %d\n",
+					i, gpio_cs);
 				goto err_gpio;
 			}
 
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 899d7a8f0889..278867a31950 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -73,7 +73,7 @@
 #define MTK_SPI_IDLE 0
 #define MTK_SPI_PAUSED 1
 
-#define MTK_SPI_MAX_FIFO_SIZE 32
+#define MTK_SPI_MAX_FIFO_SIZE 32U
 #define MTK_SPI_PACKET_SIZE 1024
 
 struct mtk_spi_compatible {
@@ -333,7 +333,7 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
 	struct mtk_spi *mdata = spi_master_get_devdata(master);
 
 	mdata->cur_transfer = xfer;
-	mdata->xfer_len = xfer->len;
+	mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, xfer->len);
 	mtk_spi_prepare_transfer(master, xfer);
 	mtk_spi_setup_packet(master);
 
@@ -410,7 +410,10 @@ static bool mtk_spi_can_dma(struct spi_master *master,
 			    struct spi_device *spi,
 			    struct spi_transfer *xfer)
 {
-	return xfer->len > MTK_SPI_MAX_FIFO_SIZE;
+	/* Buffers for DMA transactions must be 4-byte aligned */
+	return (xfer->len > MTK_SPI_MAX_FIFO_SIZE &&
+		(unsigned long)xfer->tx_buf % 4 == 0 &&
+		(unsigned long)xfer->rx_buf % 4 == 0);
 }
 
 static int mtk_spi_setup(struct spi_device *spi)
@@ -451,7 +454,33 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 					&reg_val, remainder);
 			}
 		}
-		spi_finalize_current_transfer(master);
+
+		trans->len -= mdata->xfer_len;
+		if (!trans->len) {
+			spi_finalize_current_transfer(master);
+			return IRQ_HANDLED;
+		}
+
+		if (trans->tx_buf)
+			trans->tx_buf += mdata->xfer_len;
+		if (trans->rx_buf)
+			trans->rx_buf += mdata->xfer_len;
+
+		mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, trans->len);
+		mtk_spi_setup_packet(master);
+
+		cnt = trans->len / 4;
+		iowrite32_rep(mdata->base + SPI_TX_DATA_REG, trans->tx_buf, cnt);
+
+		remainder = trans->len % 4;
+		if (remainder > 0) {
+			reg_val = 0;
+			memcpy(&reg_val, trans->tx_buf + (cnt * 4), remainder);
+			writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+		}
+
+		mtk_spi_enable_transfer(master);
+
 		return IRQ_HANDLED;
 	}
 
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index dd3d0a218d8b..967d94844b30 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -411,7 +411,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
 	if (num_gpios > 0) {
 		int i;
 
-		hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL);
+		hw->gpios = kcalloc(num_gpios, sizeof(*hw->gpios), GFP_KERNEL);
 		if (!hw->gpios) {
 			ret = -ENOMEM;
 			goto free_master;
@@ -428,8 +428,9 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
 				/* Real CS - set the initial state. */
 				ret = gpio_request(gpio, np->name);
 				if (ret < 0) {
-					dev_err(dev, "can't request gpio "
-							"#%d: %d\n", i, ret);
+					dev_err(dev,
+						"can't request gpio #%d: %d\n",
+						i, ret);
 					goto free_gpios;
 				}
 
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 58d2d48e16a5..869f188b02eb 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -41,6 +41,13 @@ struct pxa_spi_info {
 static struct dw_dma_slave byt_tx_param = { .dst_id = 0 };
 static struct dw_dma_slave byt_rx_param = { .src_id = 1 };
 
+static struct dw_dma_slave mrfld3_tx_param = { .dst_id = 15 };
+static struct dw_dma_slave mrfld3_rx_param = { .src_id = 14 };
+static struct dw_dma_slave mrfld5_tx_param = { .dst_id = 13 };
+static struct dw_dma_slave mrfld5_rx_param = { .src_id = 12 };
+static struct dw_dma_slave mrfld6_tx_param = { .dst_id = 11 };
+static struct dw_dma_slave mrfld6_rx_param = { .src_id = 10 };
+
 static struct dw_dma_slave bsw0_tx_param = { .dst_id = 0 };
 static struct dw_dma_slave bsw0_rx_param = { .src_id = 1 };
 static struct dw_dma_slave bsw1_tx_param = { .dst_id = 6 };
@@ -93,22 +100,39 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 
 static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 {
+	struct pci_dev *dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
+	struct dw_dma_slave *tx, *rx;
+
 	switch (PCI_FUNC(dev->devfn)) {
 	case 0:
 		c->port_id = 3;
 		c->num_chipselect = 1;
+		c->tx_param = &mrfld3_tx_param;
+		c->rx_param = &mrfld3_rx_param;
 		break;
 	case 1:
 		c->port_id = 5;
 		c->num_chipselect = 4;
+		c->tx_param = &mrfld5_tx_param;
+		c->rx_param = &mrfld5_rx_param;
 		break;
 	case 2:
 		c->port_id = 6;
 		c->num_chipselect = 1;
+		c->tx_param = &mrfld6_tx_param;
+		c->rx_param = &mrfld6_rx_param;
 		break;
 	default:
 		return -ENODEV;
 	}
+
+	tx = c->tx_param;
+	tx->dma_dev = &dma_dev->dev;
+
+	rx = c->rx_param;
+	rx->dma_dev = &dma_dev->dev;
+
+	c->dma_filter = lpss_dma_filter;
 	return 0;
 }
 
@@ -203,10 +227,16 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	ssp = &spi_pdata.ssp;
 	ssp->phys_base = pci_resource_start(dev, 0);
 	ssp->mmio_base = pcim_iomap_table(dev)[0];
-	ssp->irq = dev->irq;
 	ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn;
 	ssp->type = c->type;
 
+	pci_set_master(dev);
+
+	ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (ret < 0)
+		return ret;
+	ssp->irq = pci_irq_vector(dev, 0);
+
 	snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id);
 	ssp->clk = clk_register_fixed_rate(&dev->dev, buf , NULL, 0,
 					   c->max_clk_rate);
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index d6239fa718be..47b65d7c4072 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -732,6 +732,20 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
 	return IRQ_HANDLED;
 }
 
+static void handle_bad_msg(struct driver_data *drv_data)
+{
+	pxa2xx_spi_write(drv_data, SSCR0,
+			 pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
+	pxa2xx_spi_write(drv_data, SSCR1,
+			 pxa2xx_spi_read(drv_data, SSCR1) & ~drv_data->int_cr1);
+	if (!pxa25x_ssp_comp(drv_data))
+		pxa2xx_spi_write(drv_data, SSTO, 0);
+	write_SSSR_CS(drv_data, drv_data->clear_sr);
+
+	dev_err(&drv_data->pdev->dev,
+		"bad message state in interrupt handler\n");
+}
+
 static irqreturn_t ssp_int(int irq, void *dev_id)
 {
 	struct driver_data *drv_data = dev_id;
@@ -771,21 +785,11 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
 	if (!(status & mask))
 		return IRQ_NONE;
 
-	if (!drv_data->master->cur_msg) {
-
-		pxa2xx_spi_write(drv_data, SSCR0,
-				 pxa2xx_spi_read(drv_data, SSCR0)
-				 & ~SSCR0_SSE);
-		pxa2xx_spi_write(drv_data, SSCR1,
-				 pxa2xx_spi_read(drv_data, SSCR1)
-				 & ~drv_data->int_cr1);
-		if (!pxa25x_ssp_comp(drv_data))
-			pxa2xx_spi_write(drv_data, SSTO, 0);
-		write_SSSR_CS(drv_data, drv_data->clear_sr);
-
-		dev_err(&drv_data->pdev->dev,
-			"bad message state in interrupt handler\n");
+	pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg & ~drv_data->int_cr1);
+	pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg);
 
+	if (!drv_data->master->cur_msg) {
+		handle_bad_msg(drv_data);
 		/* Never fail */
 		return IRQ_HANDLED;
 	}
@@ -1458,6 +1462,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
 	{ PCI_VDEVICE(INTEL, 0x1ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x1ac4), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x1ac6), LPSS_BXT_SSP },
+	/* GLK */
+	{ PCI_VDEVICE(INTEL, 0x31c2), LPSS_BXT_SSP },
+	{ PCI_VDEVICE(INTEL, 0x31c4), LPSS_BXT_SSP },
+	{ PCI_VDEVICE(INTEL, 0x31c6), LPSS_BXT_SSP },
 	/* APL */
 	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 0f89c2169c24..acf31f36b898 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -17,6 +17,7 @@
 #include <linux/dmaengine.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/pm_runtime.h>
@@ -843,6 +844,8 @@ static int rockchip_spi_suspend(struct device *dev)
 		clk_disable_unprepare(rs->apb_pclk);
 	}
 
+	pinctrl_pm_select_sleep_state(dev);
+
 	return ret;
 }
 
@@ -852,6 +855,8 @@ static int rockchip_spi_resume(struct device *dev)
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct rockchip_spi *rs = spi_master_get_devdata(master);
 
+	pinctrl_pm_select_default_state(dev);
+
 	if (!pm_runtime_suspended(dev)) {
 		ret = clk_prepare_enable(rs->apb_pclk);
 		if (ret < 0)
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 9daf50031737..2a10b3f94ff7 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -808,7 +808,7 @@ static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
 			for (i = 0; i < len; i++)
 				rspi_write_data(rspi, *tx++);
 		} else {
-			ret = rspi_pio_transfer(rspi, tx, NULL, n);
+			ret = rspi_pio_transfer(rspi, tx, NULL, len);
 			if (ret < 0)
 				return ret;
 		}
@@ -845,10 +845,9 @@ static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
 			for (i = 0; i < len; i++)
 				*rx++ = rspi_read_data(rspi);
 		} else {
-			ret = rspi_pio_transfer(rspi, NULL, rx, n);
+			ret = rspi_pio_transfer(rspi, NULL, rx, len);
 			if (ret < 0)
 				return ret;
-			*rx++ = ret;
 		}
 		n -= len;
 	}
@@ -1227,10 +1226,8 @@ static int rspi_probe(struct platform_device *pdev)
 	const struct spi_ops *ops;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data));
-	if (master == NULL) {
-		dev_err(&pdev->dev, "spi_alloc_master error.\n");
+	if (master == NULL)
 		return -ENOMEM;
-	}
 
 	of_id = of_match_device(rspi_of_match, &pdev->dev);
 	if (of_id) {
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 28dfdce4beae..b392cca8fa4f 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -341,43 +341,16 @@ static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable)
 static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
 {
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
-	struct device *dev = &sdd->pdev->dev;
 
 	if (is_polling(sdd))
 		return 0;
 
-	/* Acquire DMA channels */
-	sdd->rx_dma.ch = dma_request_slave_channel(dev, "rx");
-	if (!sdd->rx_dma.ch) {
-		dev_err(dev, "Failed to get RX DMA channel\n");
-		return -EBUSY;
-	}
 	spi->dma_rx = sdd->rx_dma.ch;
-
-	sdd->tx_dma.ch = dma_request_slave_channel(dev, "tx");
-	if (!sdd->tx_dma.ch) {
-		dev_err(dev, "Failed to get TX DMA channel\n");
-		dma_release_channel(sdd->rx_dma.ch);
-		return -EBUSY;
-	}
 	spi->dma_tx = sdd->tx_dma.ch;
 
 	return 0;
 }
 
-static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
-{
-	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
-
-	/* Free DMA channels */
-	if (!is_polling(sdd)) {
-		dma_release_channel(sdd->rx_dma.ch);
-		dma_release_channel(sdd->tx_dma.ch);
-	}
-
-	return 0;
-}
-
 static bool s3c64xx_spi_can_dma(struct spi_master *master,
 				struct spi_device *spi,
 				struct spi_transfer *xfer)
@@ -996,7 +969,7 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
 		sci->num_cs = temp;
 	}
 
-	sci->no_cs = of_property_read_bool(dev->of_node, "broken-cs");
+	sci->no_cs = of_property_read_bool(dev->of_node, "no-cs-readback");
 
 	return sci;
 }
@@ -1094,7 +1067,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer;
 	master->prepare_message = s3c64xx_spi_prepare_message;
 	master->transfer_one = s3c64xx_spi_transfer_one;
-	master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
 	master->num_chipselect = sci->num_cs;
 	master->dma_alignment = 8;
 	master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
@@ -1161,6 +1133,24 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (!is_polling(sdd)) {
+		/* Acquire DMA channels */
+		sdd->rx_dma.ch = dma_request_slave_channel_reason(&pdev->dev,
+								  "rx");
+		if (IS_ERR(sdd->rx_dma.ch)) {
+			dev_err(&pdev->dev, "Failed to get RX DMA channel\n");
+			ret = PTR_ERR(sdd->rx_dma.ch);
+			goto err_disable_io_clk;
+		}
+		sdd->tx_dma.ch = dma_request_slave_channel_reason(&pdev->dev,
+								  "tx");
+		if (IS_ERR(sdd->tx_dma.ch)) {
+			dev_err(&pdev->dev, "Failed to get TX DMA channel\n");
+			ret = PTR_ERR(sdd->tx_dma.ch);
+			goto err_release_rx_dma;
+		}
+	}
+
 	pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
@@ -1206,6 +1196,12 @@ err_pm_put:
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 
+	if (!is_polling(sdd))
+		dma_release_channel(sdd->tx_dma.ch);
+err_release_rx_dma:
+	if (!is_polling(sdd))
+		dma_release_channel(sdd->rx_dma.ch);
+err_disable_io_clk:
 	clk_disable_unprepare(sdd->ioclk);
 err_disable_src_clk:
 	clk_disable_unprepare(sdd->src_clk);
@@ -1226,6 +1222,11 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
 
 	writel(0, sdd->regs + S3C64XX_SPI_INT_EN);
 
+	if (!is_polling(sdd)) {
+		dma_release_channel(sdd->rx_dma.ch);
+		dma_release_channel(sdd->tx_dma.ch);
+	}
+
 	clk_disable_unprepare(sdd->ioclk);
 
 	clk_disable_unprepare(sdd->src_clk);
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 1f00eeb0b5a3..2ce15ca97782 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -1164,10 +1164,8 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
 	int ret;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct sh_msiof_spi_priv));
-	if (master == NULL) {
-		dev_err(&pdev->dev, "failed to allocate spi master\n");
+	if (master == NULL)
 		return -ENOMEM;
-	}
 
 	p = spi_master_get_devdata(master);
 
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index ec6fb09e2e17..ad76a44fee6f 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -652,7 +652,8 @@ static int ti_qspi_probe(struct platform_device *pdev)
 		r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 		if (r == NULL) {
 			dev_err(&pdev->dev, "missing platform data\n");
-			return -ENODEV;
+			ret = -ENODEV;
+			goto free_master;
 		}
 	}
 
@@ -669,7 +670,8 @@ static int ti_qspi_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq resource?\n");
-		return irq;
+		ret = irq;
+		goto free_master;
 	}
 
 	mutex_init(&qspi->list_lock);
@@ -685,15 +687,17 @@ static int ti_qspi_probe(struct platform_device *pdev)
 		qspi->ctrl_base =
 		syscon_regmap_lookup_by_phandle(np,
 						"syscon-chipselects");
-		if (IS_ERR(qspi->ctrl_base))
-			return PTR_ERR(qspi->ctrl_base);
+		if (IS_ERR(qspi->ctrl_base)) {
+			ret = PTR_ERR(qspi->ctrl_base);
+			goto free_master;
+		}
 		ret = of_property_read_u32_index(np,
 						 "syscon-chipselects",
 						 1, &qspi->ctrl_reg);
 		if (ret) {
 			dev_err(&pdev->dev,
 				"couldn't get ctrl_mod reg index\n");
-			return ret;
+			goto free_master;
 		}
 	}
 
@@ -714,9 +718,10 @@ static int ti_qspi_probe(struct platform_device *pdev)
 	dma_cap_set(DMA_MEMCPY, mask);
 
 	qspi->rx_chan = dma_request_chan_by_mask(&mask);
-	if (!qspi->rx_chan) {
+	if (IS_ERR(qspi->rx_chan)) {
 		dev_err(qspi->dev,
 			"No Rx DMA available, trying mmap mode\n");
+		qspi->rx_chan = NULL;
 		ret = 0;
 		goto no_dma;
 	}
@@ -742,6 +747,7 @@ no_dma:
 	if (!ret)
 		return 0;
 
+	pm_runtime_disable(&pdev->dev);
 free_master:
 	spi_master_put(master);
 	return ret;
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index fcb991034c3d..97d137591b18 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -591,7 +591,6 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw)
 
 	if (!data->pkt_rx_buff) {
 		/* flush queue and set status of all transfers to -ENOMEM */
-		dev_err(&data->master->dev, "%s :kzalloc failed\n", __func__);
 		list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
 			pmsg->status = -ENOMEM;
 
@@ -622,8 +621,9 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw)
 	if (n_writes > PCH_MAX_FIFO_DEPTH)
 		n_writes = PCH_MAX_FIFO_DEPTH;
 
-	dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing "
-		"0x2 to SSNXCR\n", __func__);
+	dev_dbg(&data->master->dev,
+		"\n%s:Pulling down SSN low - writing 0x2 to SSNXCR\n",
+		__func__);
 	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
 
 	for (j = 0; j < n_writes; j++)
@@ -915,7 +915,6 @@ static void pch_spi_release_dma(struct pch_spi_data *data)
 		dma_release_channel(dma->chan_rx);
 		dma->chan_rx = NULL;
 	}
-	return;
 }
 
 static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
@@ -1008,7 +1007,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
 	spin_unlock_irqrestore(&data->lock, flags);
 
 	/* RX */
-	dma->sg_rx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
+	dma->sg_rx_p = kcalloc(num, sizeof(*dma->sg_rx_p), GFP_ATOMIC);
 	sg_init_table(dma->sg_rx_p, num); /* Initialize SG table */
 	/* offset, length setting */
 	sg = dma->sg_rx_p;
@@ -1068,7 +1067,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
 		head = 0;
 	}
 
-	dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
+	dma->sg_tx_p = kcalloc(num, sizeof(*dma->sg_tx_p), GFP_ATOMIC);
 	sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */
 	/* offset, length setting */
 	sg = dma->sg_tx_p;
@@ -1181,14 +1180,16 @@ static void pch_spi_process_messages(struct work_struct *pwork)
 			data->cur_trans =
 				list_entry(data->current_msg->transfers.next,
 					   struct spi_transfer, transfer_list);
-			dev_dbg(&data->master->dev, "%s "
-				":Getting 1st transfer message\n", __func__);
+			dev_dbg(&data->master->dev,
+				"%s :Getting 1st transfer message\n",
+				__func__);
 		} else {
 			data->cur_trans =
 				list_entry(data->cur_trans->transfer_list.next,
 					   struct spi_transfer, transfer_list);
-			dev_dbg(&data->master->dev, "%s "
-				":Getting next transfer message\n", __func__);
+			dev_dbg(&data->master->dev,
+				"%s :Getting next transfer message\n",
+				__func__);
 		}
 		spin_unlock(&data->lock);
 
@@ -1233,9 +1234,8 @@ static void pch_spi_process_messages(struct work_struct *pwork)
 
 		/* check for delay */
 		if (data->cur_trans->delay_usecs) {
-			dev_dbg(&data->master->dev, "%s:"
-				"delay in usec=%d\n", __func__,
-				data->cur_trans->delay_usecs);
+			dev_dbg(&data->master->dev, "%s:delay in usec=%d\n",
+				__func__, data->cur_trans->delay_usecs);
 			udelay(data->cur_trans->delay_usecs);
 		}
 
@@ -1292,7 +1292,6 @@ static void pch_free_dma_buf(struct pch_spi_board_data *board_dat,
 	if (dma->rx_buf_dma)
 		dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE,
 				  dma->rx_buf_virt, dma->rx_buf_dma);
-	return;
 }
 
 static void pch_alloc_dma_buf(struct pch_spi_board_data *board_dat,
@@ -1541,11 +1540,11 @@ static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	int i;
 	struct pch_pd_dev_save *pd_dev_save;
 
-	pd_dev_save = kzalloc(sizeof(struct pch_pd_dev_save), GFP_KERNEL);
+	pd_dev_save = kzalloc(sizeof(*pd_dev_save), GFP_KERNEL);
 	if (!pd_dev_save)
 		return -ENOMEM;
 
-	board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL);
+	board_dat = kzalloc(sizeof(*board_dat), GFP_KERNEL);
 	if (!board_dat) {
 		retval = -ENOMEM;
 		goto err_no_mem;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 656dd3e3220c..f274df9e0e3e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -621,8 +621,10 @@ void spi_unregister_device(struct spi_device *spi)
 	if (!spi)
 		return;
 
-	if (spi->dev.of_node)
+	if (spi->dev.of_node) {
 		of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
+		of_node_put(spi->dev.of_node);
+	}
 	if (ACPI_COMPANION(&spi->dev))
 		acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
 	device_unregister(&spi->dev);
@@ -672,7 +674,7 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n)
 	if (!n)
 		return -EINVAL;
 
-	bi = kzalloc(n * sizeof(*bi), GFP_KERNEL);
+	bi = kcalloc(n, sizeof(*bi), GFP_KERNEL);
 	if (!bi)
 		return -ENOMEM;
 
@@ -805,12 +807,12 @@ static int __spi_map_msg(struct spi_master *master, struct spi_message *msg)
 	if (master->dma_tx)
 		tx_dev = master->dma_tx->device->dev;
 	else
-		tx_dev = &master->dev;
+		tx_dev = master->dev.parent;
 
 	if (master->dma_rx)
 		rx_dev = master->dma_rx->device->dev;
 	else
-		rx_dev = &master->dev;
+		rx_dev = master->dev.parent;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 		if (!master->can_dma(master, msg->spi, xfer))
@@ -852,12 +854,12 @@ static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
 	if (master->dma_tx)
 		tx_dev = master->dma_tx->device->dev;
 	else
-		tx_dev = &master->dev;
+		tx_dev = master->dev.parent;
 
 	if (master->dma_rx)
 		rx_dev = master->dma_rx->device->dev;
 	else
-		rx_dev = &master->dev;
+		rx_dev = master->dev.parent;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 		if (!master->can_dma(master, msg->spi, xfer))
@@ -1502,37 +1504,18 @@ err_init_queue:
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_OF)
-static struct spi_device *
-of_register_spi_device(struct spi_master *master, struct device_node *nc)
+static int of_spi_parse_dt(struct spi_master *master, struct spi_device *spi,
+			   struct device_node *nc)
 {
-	struct spi_device *spi;
-	int rc;
 	u32 value;
-
-	/* Alloc an spi_device */
-	spi = spi_alloc_device(master);
-	if (!spi) {
-		dev_err(&master->dev, "spi_device alloc error for %s\n",
-			nc->full_name);
-		rc = -ENOMEM;
-		goto err_out;
-	}
-
-	/* Select device driver */
-	rc = of_modalias_node(nc, spi->modalias,
-				sizeof(spi->modalias));
-	if (rc < 0) {
-		dev_err(&master->dev, "cannot find modalias for %s\n",
-			nc->full_name);
-		goto err_out;
-	}
+	int rc;
 
 	/* Device address */
 	rc = of_property_read_u32(nc, "reg", &value);
 	if (rc) {
 		dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
 			nc->full_name, rc);
-		goto err_out;
+		return rc;
 	}
 	spi->chip_select = value;
 
@@ -1590,10 +1573,41 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc)
 	if (rc) {
 		dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
 			nc->full_name, rc);
-		goto err_out;
+		return rc;
 	}
 	spi->max_speed_hz = value;
 
+	return 0;
+}
+
+static struct spi_device *
+of_register_spi_device(struct spi_master *master, struct device_node *nc)
+{
+	struct spi_device *spi;
+	int rc;
+
+	/* Alloc an spi_device */
+	spi = spi_alloc_device(master);
+	if (!spi) {
+		dev_err(&master->dev, "spi_device alloc error for %s\n",
+			nc->full_name);
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
+	/* Select device driver */
+	rc = of_modalias_node(nc, spi->modalias,
+				sizeof(spi->modalias));
+	if (rc < 0) {
+		dev_err(&master->dev, "cannot find modalias for %s\n",
+			nc->full_name);
+		goto err_out;
+	}
+
+	rc = of_spi_parse_dt(master, spi, nc);
+	if (rc)
+		goto err_out;
+
 	/* Store a pointer to the node in the device structure */
 	of_node_get(nc);
 	spi->dev.of_node = nc;
@@ -1603,11 +1617,13 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc)
 	if (rc) {
 		dev_err(&master->dev, "spi_device register error %s\n",
 			nc->full_name);
-		goto err_out;
+		goto err_of_node_put;
 	}
 
 	return spi;
 
+err_of_node_put:
+	of_node_put(nc);
 err_out:
 	spi_dev_put(spi);
 	return ERR_PTR(rc);
diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h
index 9bb63ac13f04..171a271c2cbd 100644
--- a/include/linux/platform_data/spi-ep93xx.h
+++ b/include/linux/platform_data/spi-ep93xx.h
@@ -5,25 +5,14 @@ struct spi_device;
 
 /**
  * struct ep93xx_spi_info - EP93xx specific SPI descriptor
- * @num_chipselect: number of chip selects on this board, must be
- *                  at least one
+ * @chipselect: array of gpio numbers to use as chip selects
+ * @num_chipselect: ARRAY_SIZE(chipselect)
  * @use_dma: use DMA for the transfers
  */
 struct ep93xx_spi_info {
+	int	*chipselect;
 	int	num_chipselect;
 	bool	use_dma;
 };
 
-/**
- * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
- * @setup: setup the chip select mechanism
- * @cleanup: cleanup the chip select mechanism
- * @cs_control: control the device chip select
- */
-struct ep93xx_spi_chip_ops {
-	int	(*setup)(struct spi_device *spi);
-	void	(*cleanup)(struct spi_device *spi);
-	void	(*cs_control)(struct spi_device *spi, int value);
-};
-
 #endif /* __ASM_MACH_EP93XX_SPI_H */
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 2d6f0c39ed68..a0522328d7aa 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -90,9 +90,9 @@
 #define SSSR_RFL_MASK	(0xf << 12)	/* Receive FIFO Level mask */
 
 #define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6)	/* level [1..16] */
 #define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10)	/* level [1..16] */
 
 #define RX_THRESH_CE4100_DFLT	2
 #define TX_THRESH_CE4100_DFLT	2
@@ -106,9 +106,9 @@
 #define CE4100_SSCR1_RxTresh(x) (((x) - 1) << 10)	/* level [1..4] */
 
 /* QUARK_X1000 SSCR0 bit definition */
-#define QUARK_X1000_SSCR0_DSS	(0x1F)		/* Data Size Select (mask) */
-#define QUARK_X1000_SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..32] */
-#define QUARK_X1000_SSCR0_FRF	(0x3 << 5)	/* FRame Format (mask) */
+#define QUARK_X1000_SSCR0_DSS		(0x1F << 0)	/* Data Size Select (mask) */
+#define QUARK_X1000_SSCR0_DataSize(x)	((x) - 1)	/* Data Size Select [4..32] */
+#define QUARK_X1000_SSCR0_FRF		(0x3 << 5)	/* FRame Format (mask) */
 #define QUARK_X1000_SSCR0_Motorola	(0x0 << 5)	/* Motorola's Serial Peripheral Interface (SPI) */
 
 #define RX_THRESH_QUARK_X1000_DFLT	1
@@ -121,8 +121,8 @@
 #define QUARK_X1000_SSCR1_TxTresh(x) (((x) - 1) << 6)	/* level [1..32] */
 #define QUARK_X1000_SSCR1_RFT	(0x1F << 11)	/* Receive FIFO Threshold (mask) */
 #define QUARK_X1000_SSCR1_RxTresh(x) (((x) - 1) << 11)	/* level [1..32] */
-#define QUARK_X1000_SSCR1_STRF       (1 << 17)		/* Select FIFO or EFWR */
-#define QUARK_X1000_SSCR1_EFWR	(1 << 16)		/* Enable FIFO Write/Read */
+#define QUARK_X1000_SSCR1_STRF	(1 << 17)	/* Select FIFO or EFWR */
+#define QUARK_X1000_SSCR1_EFWR	(1 << 16)	/* Enable FIFO Write/Read */
 
 /* extra bits in PXA255, PXA26x and PXA27x SSP ports */
 #define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */