rcu: Provide diagnostic option to slow down grace-period scans

Grace-period scans of the rcu_node combining tree normally
proceed quite quickly, so that it is very difficult to reproduce
races against them.  This commit therefore allows grace-period
pre-initialization and cleanup to be artificially slowed down,
increasing race-reproduction probability.  A pair of pairs of new
Kconfig parameters are provided, RCU_TORTURE_TEST_SLOW_PREINIT to
enable the slowing down of propagating CPU-hotplug changes up the
combining tree along with RCU_TORTURE_TEST_SLOW_PREINIT_DELAY to
specify the delay in jiffies, and RCU_TORTURE_TEST_SLOW_CLEANUP
to enable the slowing down of the end-of-grace-period cleanup scan
along with RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY to specify the delay
in jiffies.  Boot-time parameters named rcutree.gp_preinit_delay and
rcutree.gp_cleanup_delay allow these delays to be specified at boot time.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

4 files changed, 93 insertions, 8 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 61ab1628a057..10a4fb80c033 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2992,11 +2992,23 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Set maximum number of finished RCU callbacks to
 			process in one batch.
 
+	rcutree.gp_cleanup_delay=	[KNL]
+			Set the number of jiffies to delay each step of
+			RCU grace-period cleanup.  This only has effect
+			when CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is set.
+
 	rcutree.gp_init_delay=	[KNL]
 			Set the number of jiffies to delay each step of
 			RCU grace-period initialization.  This only has
-			effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT is
-			set.
+			effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT
+			is set.
+
+	rcutree.gp_preinit_delay=	[KNL]
+			Set the number of jiffies to delay each step of
+			RCU grace-period pre-initialization, that is,
+			the propagation of recent CPU-hotplug changes up
+			the rcu_node combining tree.  This only has effect
+			when CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is set.
 
 	rcutree.rcu_fanout_leaf= [KNL]
 			Increase the number of CPUs assigned to each
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 9b076b284695..2f3cb5513ca3 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -163,6 +163,14 @@ static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO;
 module_param(kthread_prio, int, 0644);
 
 /* Delay in jiffies for grace-period initialization delays, debug only. */
+
+#ifdef CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT
+static int gp_preinit_delay = CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT_DELAY;
+module_param(gp_preinit_delay, int, 0644);
+#else /* #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT */
+static const int gp_preinit_delay;
+#endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT */
+
 #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT
 static int gp_init_delay = CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY;
 module_param(gp_init_delay, int, 0644);
@@ -170,6 +178,13 @@ module_param(gp_init_delay, int, 0644);
 static const int gp_init_delay;
 #endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */
 
+#ifdef CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP
+static int gp_cleanup_delay = CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY;
+module_param(gp_cleanup_delay, int, 0644);
+#else /* #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP */
+static const int gp_cleanup_delay;
+#endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP */
+
 /*
  * Number of grace periods between delays, normalized by the duration of
  * the delay.  The longer the the delay, the more the grace periods between
@@ -1742,6 +1757,13 @@ static void note_gp_changes(struct rcu_state *rsp, struct rcu_data *rdp)
 		rcu_gp_kthread_wake(rsp);
 }
 
+static void rcu_gp_slow(struct rcu_state *rsp, int delay)
+{
+	if (delay > 0 &&
+	    !(rsp->gpnum % (rcu_num_nodes * PER_RCU_NODE_PERIOD * delay)))
+		schedule_timeout_uninterruptible(delay);
+}
+
 /*
  * Initialize a new grace period.  Return 0 if no grace period required.
  */
@@ -1784,6 +1806,7 @@ static int rcu_gp_init(struct rcu_state *rsp)
 	 * will handle subsequent offline CPUs.
 	 */
 	rcu_for_each_leaf_node(rsp, rnp) {
+		rcu_gp_slow(rsp, gp_preinit_delay);
 		raw_spin_lock_irq(&rnp->lock);
 		smp_mb__after_unlock_lock();
 		if (rnp->qsmaskinit == rnp->qsmaskinitnext &&
@@ -1840,6 +1863,7 @@ static int rcu_gp_init(struct rcu_state *rsp)
 	 * process finishes, because this kthread handles both.
 	 */
 	rcu_for_each_node_breadth_first(rsp, rnp) {
+		rcu_gp_slow(rsp, gp_init_delay);
 		raw_spin_lock_irq(&rnp->lock);
 		smp_mb__after_unlock_lock();
 		rdp = this_cpu_ptr(rsp->rda);
@@ -1857,10 +1881,6 @@ static int rcu_gp_init(struct rcu_state *rsp)
 		raw_spin_unlock_irq(&rnp->lock);
 		cond_resched_rcu_qs();
 		WRITE_ONCE(rsp->gp_activity, jiffies);
-		if (gp_init_delay > 0 &&
-		    !(rsp->gpnum %
-		      (rcu_num_nodes * PER_RCU_NODE_PERIOD * gp_init_delay)))
-			schedule_timeout_uninterruptible(gp_init_delay);
 	}
 
 	return 1;
@@ -1955,6 +1975,7 @@ static void rcu_gp_cleanup(struct rcu_state *rsp)
 		raw_spin_unlock_irq(&rnp->lock);
 		cond_resched_rcu_qs();
 		WRITE_ONCE(rsp->gp_activity, jiffies);
+		rcu_gp_slow(rsp, gp_cleanup_delay);
 	}
 	rnp = rcu_get_root(rsp);
 	raw_spin_lock_irq(&rnp->lock);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ba2b0c87e65b..e1af93ae246b 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1261,12 +1261,38 @@ config RCU_TORTURE_TEST_RUNNABLE
 	  Say N here if you want the RCU torture tests to start only
 	  after being manually enabled via /proc.
 
+config RCU_TORTURE_TEST_SLOW_PREINIT
+	bool "Slow down RCU grace-period pre-initialization to expose races"
+	depends on RCU_TORTURE_TEST
+	help
+	  This option delays grace-period pre-initialization (the
+	  propagation of CPU-hotplug changes up the rcu_node combining
+	  tree) for a few jiffies between initializing each pair of
+	  consecutive rcu_node structures.  This helps to expose races
+	  involving grace-period pre-initialization, in other words, it
+	  makes your kernel less stable.  It can also greatly increase
+	  grace-period latency, especially on systems with large numbers
+	  of CPUs.  This is useful when torture-testing RCU, but in
+	  almost no other circumstance.
+
+	  Say Y here if you want your system to crash and hang more often.
+	  Say N if you want a sane system.
+
+config RCU_TORTURE_TEST_SLOW_PREINIT_DELAY
+	int "How much to slow down RCU grace-period pre-initialization"
+	range 0 5
+	default 3
+	depends on RCU_TORTURE_TEST_SLOW_PREINIT
+	help
+	  This option specifies the number of jiffies to wait between
+	  each rcu_node structure pre-initialization step.
+
 config RCU_TORTURE_TEST_SLOW_INIT
 	bool "Slow down RCU grace-period initialization to expose races"
 	depends on RCU_TORTURE_TEST
 	help
-	  This option makes grace-period initialization block for a
-	  few jiffies between initializing each pair of consecutive
+	  This option delays grace-period initialization for a few
+	  jiffies between initializing each pair of consecutive
 	  rcu_node structures.	This helps to expose races involving
 	  grace-period initialization, in other words, it makes your
 	  kernel less stable.  It can also greatly increase grace-period
@@ -1286,6 +1312,30 @@ config RCU_TORTURE_TEST_SLOW_INIT_DELAY
 	  This option specifies the number of jiffies to wait between
 	  each rcu_node structure initialization.
 
+config RCU_TORTURE_TEST_SLOW_CLEANUP
+	bool "Slow down RCU grace-period cleanup to expose races"
+	depends on RCU_TORTURE_TEST
+	help
+	  This option delays grace-period cleanup for a few jiffies
+	  between cleaning up each pair of consecutive rcu_node
+	  structures.  This helps to expose races involving grace-period
+	  cleanup, in other words, it makes your kernel less stable.
+	  It can also greatly increase grace-period latency, especially
+	  on systems with large numbers of CPUs.  This is useful when
+	  torture-testing RCU, but in almost no other circumstance.
+
+	  Say Y here if you want your system to crash and hang more often.
+	  Say N if you want a sane system.
+
+config RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY
+	int "How much to slow down RCU grace-period cleanup"
+	range 0 5
+	default 3
+	depends on RCU_TORTURE_TEST_SLOW_CLEANUP
+	help
+	  This option specifies the number of jiffies to wait between
+	  each rcu_node structure cleanup operation.
+
 config RCU_CPU_STALL_TIMEOUT
 	int "RCU CPU stall timeout in seconds"
 	depends on RCU_STALL_COMMON
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
index 49701218dc62..f824b4c9d9d9 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
+++ b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
@@ -1,3 +1,5 @@
 CONFIG_RCU_TORTURE_TEST=y
 CONFIG_PRINTK_TIME=y
+CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP=y
 CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y
+CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT=y